4da722ca19
Pretty much any node can have a status property, so it doesn't need to be in examples. Converted with the following command and removed examples with SoC and board specific splits: git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d' Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Rob Herring <robh@kernel.org>
20 lines
563 B
Plaintext
20 lines
563 B
Plaintext
NXP LPC1850 DAC bindings
|
|
|
|
Required properties:
|
|
- compatible: Should be "nxp,lpc1850-dac"
|
|
- reg: Offset and length of the register set for the ADC device
|
|
- interrupts: The interrupt number for the ADC device
|
|
- clocks: The root clock of the ADC controller
|
|
- vref-supply: The regulator supply ADC reference voltage
|
|
- resets: phandle to reset controller and line specifier
|
|
|
|
Example:
|
|
dac: dac@400e1000 {
|
|
compatible = "nxp,lpc1850-dac";
|
|
reg = <0x400e1000 0x1000>;
|
|
interrupts = <0>;
|
|
clocks = <&ccu1 CLK_APB3_DAC>;
|
|
vref-supply = <®_vdda>;
|
|
resets = <&rgu 42>;
|
|
};
|