96b4ea324a
Arguments are supposed to be ordered high then low.
Fixes: a228890f94
("phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC")
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Tested-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Ondrej Jirman <megous@megous.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191110124355.1569-1-rikard.falkeborn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
191 lines
5.0 KiB
C
191 lines
5.0 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Allwinner sun50i(H6) USB 3.0 phy driver
|
|
*
|
|
* Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
|
|
*
|
|
* Based on phy-sun9i-usb.c, which is:
|
|
*
|
|
* Copyright (C) 2014-2015 Chen-Yu Tsai <wens@csie.org>
|
|
*
|
|
* Based on code from Allwinner BSP, which is:
|
|
*
|
|
* Copyright (c) 2010-2015 Allwinner Technology Co., Ltd.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reset.h>
|
|
|
|
/* Interface Status and Control Registers */
|
|
#define SUNXI_ISCR 0x00
|
|
#define SUNXI_PIPE_CLOCK_CONTROL 0x14
|
|
#define SUNXI_PHY_TUNE_LOW 0x18
|
|
#define SUNXI_PHY_TUNE_HIGH 0x1c
|
|
#define SUNXI_PHY_EXTERNAL_CONTROL 0x20
|
|
|
|
/* USB2.0 Interface Status and Control Register */
|
|
#define SUNXI_ISCR_FORCE_VBUS (3 << 12)
|
|
|
|
/* PIPE Clock Control Register */
|
|
#define SUNXI_PCC_PIPE_CLK_OPEN (1 << 6)
|
|
|
|
/* PHY External Control Register */
|
|
#define SUNXI_PEC_EXTERN_VBUS (3 << 1)
|
|
#define SUNXI_PEC_SSC_EN (1 << 24)
|
|
#define SUNXI_PEC_REF_SSP_EN (1 << 26)
|
|
|
|
/* PHY Tune High Register */
|
|
#define SUNXI_TX_DEEMPH_3P5DB(n) ((n) << 19)
|
|
#define SUNXI_TX_DEEMPH_3P5DB_MASK GENMASK(24, 19)
|
|
#define SUNXI_TX_DEEMPH_6DB(n) ((n) << 13)
|
|
#define SUNXI_TX_DEEMPH_6GB_MASK GENMASK(18, 13)
|
|
#define SUNXI_TX_SWING_FULL(n) ((n) << 6)
|
|
#define SUNXI_TX_SWING_FULL_MASK GENMASK(12, 6)
|
|
#define SUNXI_LOS_BIAS(n) ((n) << 3)
|
|
#define SUNXI_LOS_BIAS_MASK GENMASK(5, 3)
|
|
#define SUNXI_TXVBOOSTLVL(n) ((n) << 0)
|
|
#define SUNXI_TXVBOOSTLVL_MASK GENMASK(2, 0)
|
|
|
|
struct sun50i_usb3_phy {
|
|
struct phy *phy;
|
|
void __iomem *regs;
|
|
struct reset_control *reset;
|
|
struct clk *clk;
|
|
};
|
|
|
|
static void sun50i_usb3_phy_open(struct sun50i_usb3_phy *phy)
|
|
{
|
|
u32 val;
|
|
|
|
val = readl(phy->regs + SUNXI_PHY_EXTERNAL_CONTROL);
|
|
val |= SUNXI_PEC_EXTERN_VBUS;
|
|
val |= SUNXI_PEC_SSC_EN | SUNXI_PEC_REF_SSP_EN;
|
|
writel(val, phy->regs + SUNXI_PHY_EXTERNAL_CONTROL);
|
|
|
|
val = readl(phy->regs + SUNXI_PIPE_CLOCK_CONTROL);
|
|
val |= SUNXI_PCC_PIPE_CLK_OPEN;
|
|
writel(val, phy->regs + SUNXI_PIPE_CLOCK_CONTROL);
|
|
|
|
val = readl(phy->regs + SUNXI_ISCR);
|
|
val |= SUNXI_ISCR_FORCE_VBUS;
|
|
writel(val, phy->regs + SUNXI_ISCR);
|
|
|
|
/*
|
|
* All the magic numbers written to the PHY_TUNE_{LOW_HIGH}
|
|
* registers are directly taken from the BSP USB3 driver from
|
|
* Allwiner.
|
|
*/
|
|
writel(0x0047fc87, phy->regs + SUNXI_PHY_TUNE_LOW);
|
|
|
|
val = readl(phy->regs + SUNXI_PHY_TUNE_HIGH);
|
|
val &= ~(SUNXI_TXVBOOSTLVL_MASK | SUNXI_LOS_BIAS_MASK |
|
|
SUNXI_TX_SWING_FULL_MASK | SUNXI_TX_DEEMPH_6GB_MASK |
|
|
SUNXI_TX_DEEMPH_3P5DB_MASK);
|
|
val |= SUNXI_TXVBOOSTLVL(0x7);
|
|
val |= SUNXI_LOS_BIAS(0x7);
|
|
val |= SUNXI_TX_SWING_FULL(0x55);
|
|
val |= SUNXI_TX_DEEMPH_6DB(0x20);
|
|
val |= SUNXI_TX_DEEMPH_3P5DB(0x15);
|
|
writel(val, phy->regs + SUNXI_PHY_TUNE_HIGH);
|
|
}
|
|
|
|
static int sun50i_usb3_phy_init(struct phy *_phy)
|
|
{
|
|
struct sun50i_usb3_phy *phy = phy_get_drvdata(_phy);
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(phy->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = reset_control_deassert(phy->reset);
|
|
if (ret) {
|
|
clk_disable_unprepare(phy->clk);
|
|
return ret;
|
|
}
|
|
|
|
sun50i_usb3_phy_open(phy);
|
|
return 0;
|
|
}
|
|
|
|
static int sun50i_usb3_phy_exit(struct phy *_phy)
|
|
{
|
|
struct sun50i_usb3_phy *phy = phy_get_drvdata(_phy);
|
|
|
|
reset_control_assert(phy->reset);
|
|
clk_disable_unprepare(phy->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops sun50i_usb3_phy_ops = {
|
|
.init = sun50i_usb3_phy_init,
|
|
.exit = sun50i_usb3_phy_exit,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int sun50i_usb3_phy_probe(struct platform_device *pdev)
|
|
{
|
|
struct sun50i_usb3_phy *phy;
|
|
struct device *dev = &pdev->dev;
|
|
struct phy_provider *phy_provider;
|
|
struct resource *res;
|
|
|
|
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
|
|
if (!phy)
|
|
return -ENOMEM;
|
|
|
|
phy->clk = devm_clk_get(dev, NULL);
|
|
if (IS_ERR(phy->clk)) {
|
|
if (PTR_ERR(phy->clk) != -EPROBE_DEFER)
|
|
dev_err(dev, "failed to get phy clock\n");
|
|
return PTR_ERR(phy->clk);
|
|
}
|
|
|
|
phy->reset = devm_reset_control_get(dev, NULL);
|
|
if (IS_ERR(phy->reset)) {
|
|
dev_err(dev, "failed to get reset control\n");
|
|
return PTR_ERR(phy->reset);
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
phy->regs = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(phy->regs))
|
|
return PTR_ERR(phy->regs);
|
|
|
|
phy->phy = devm_phy_create(dev, NULL, &sun50i_usb3_phy_ops);
|
|
if (IS_ERR(phy->phy)) {
|
|
dev_err(dev, "failed to create PHY\n");
|
|
return PTR_ERR(phy->phy);
|
|
}
|
|
|
|
phy_set_drvdata(phy->phy, phy);
|
|
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
|
|
|
|
return PTR_ERR_OR_ZERO(phy_provider);
|
|
}
|
|
|
|
static const struct of_device_id sun50i_usb3_phy_of_match[] = {
|
|
{ .compatible = "allwinner,sun50i-h6-usb3-phy" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sun50i_usb3_phy_of_match);
|
|
|
|
static struct platform_driver sun50i_usb3_phy_driver = {
|
|
.probe = sun50i_usb3_phy_probe,
|
|
.driver = {
|
|
.of_match_table = sun50i_usb3_phy_of_match,
|
|
.name = "sun50i-usb3-phy",
|
|
}
|
|
};
|
|
module_platform_driver(sun50i_usb3_phy_driver);
|
|
|
|
MODULE_DESCRIPTION("Allwinner H6 USB 3.0 phy driver");
|
|
MODULE_AUTHOR("Icenowy Zheng <icenowy@aosc.io>");
|
|
MODULE_LICENSE("GPL");
|