tmp_suning_uos_patched/drivers/s390/cio/cio.h
Sebastian Ott 13952ec12d [S390] cio: introduce cio_commit_config
To change the configuration of a subchannel we alter the modifiable
bits of the subchannel's schib field and issue a modify subchannel.
There can be the case that not all changes were applied -or worse-
quietly overwritten by the hardware. With the next store subchannel
we obtain the current state of the hardware but lose our target
configuration.

With this patch we introduce a subchannel_config structure which
contains the target subchannel configuration. Additionally the msch
wrapper cio_modify is replaced with cio_commit_config which
copies the desired changes to a temporary schib. msch is then
called with the temporary schib. This schib is only written back
to the subchannel if all changes were applied.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-25 13:39:10 +01:00

148 lines
4.8 KiB
C

#ifndef S390_CIO_H
#define S390_CIO_H
#include <linux/mutex.h>
#include <linux/device.h>
#include <linux/mod_devicetable.h>
#include <asm/chpid.h>
#include <asm/cio.h>
#include <asm/fcx.h>
#include <asm/schid.h>
#include "chsc.h"
/*
* path management control word
*/
struct pmcw {
u32 intparm; /* interruption parameter */
u32 qf : 1; /* qdio facility */
u32 w : 1;
u32 isc : 3; /* interruption sublass */
u32 res5 : 3; /* reserved zeros */
u32 ena : 1; /* enabled */
u32 lm : 2; /* limit mode */
u32 mme : 2; /* measurement-mode enable */
u32 mp : 1; /* multipath mode */
u32 tf : 1; /* timing facility */
u32 dnv : 1; /* device number valid */
u32 dev : 16; /* device number */
u8 lpm; /* logical path mask */
u8 pnom; /* path not operational mask */
u8 lpum; /* last path used mask */
u8 pim; /* path installed mask */
u16 mbi; /* measurement-block index */
u8 pom; /* path operational mask */
u8 pam; /* path available mask */
u8 chpid[8]; /* CHPID 0-7 (if available) */
u32 unused1 : 8; /* reserved zeros */
u32 st : 3; /* subchannel type */
u32 unused2 : 18; /* reserved zeros */
u32 mbfc : 1; /* measurement block format control */
u32 xmwme : 1; /* extended measurement word mode enable */
u32 csense : 1; /* concurrent sense; can be enabled ...*/
/* ... per MSCH, however, if facility */
/* ... is not installed, this results */
/* ... in an operand exception. */
} __attribute__ ((packed));
/* Target SCHIB configuration. */
struct schib_config {
u64 mba;
u32 intparm;
u16 mbi;
u32 isc:3;
u32 ena:1;
u32 mme:2;
u32 mp:1;
u32 csense:1;
u32 mbfc:1;
} __attribute__ ((packed));
/*
* subchannel information block
*/
struct schib {
struct pmcw pmcw; /* path management control word */
union scsw scsw; /* subchannel status word */
__u64 mba; /* measurement block address */
__u8 mda[4]; /* model dependent area */
} __attribute__ ((packed,aligned(4)));
/* subchannel data structure used by I/O subroutines */
struct subchannel {
struct subchannel_id schid;
spinlock_t *lock; /* subchannel lock */
struct mutex reg_mutex;
enum {
SUBCHANNEL_TYPE_IO = 0,
SUBCHANNEL_TYPE_CHSC = 1,
SUBCHANNEL_TYPE_MSG = 2,
SUBCHANNEL_TYPE_ADM = 3,
} st; /* subchannel type */
struct {
unsigned int suspend:1; /* allow suspend */
unsigned int prefetch:1;/* deny prefetch */
unsigned int inter:1; /* suppress intermediate interrupts */
} __attribute__ ((packed)) options;
__u8 vpm; /* verified path mask */
__u8 lpm; /* logical path mask */
__u8 opm; /* operational path mask */
struct schib schib; /* subchannel information block */
int isc; /* desired interruption subclass */
struct chsc_ssd_info ssd_info; /* subchannel description */
struct device dev; /* entry in device tree */
struct css_driver *driver;
void *private; /* private per subchannel type data */
struct work_struct work;
struct schib_config config;
} __attribute__ ((aligned(8)));
#define IO_INTERRUPT_TYPE 0 /* I/O interrupt type */
#define to_subchannel(n) container_of(n, struct subchannel, dev)
extern int cio_validate_subchannel (struct subchannel *, struct subchannel_id);
extern int cio_enable_subchannel(struct subchannel *, u32);
extern int cio_disable_subchannel (struct subchannel *);
extern int cio_cancel (struct subchannel *);
extern int cio_clear (struct subchannel *);
extern int cio_resume (struct subchannel *);
extern int cio_halt (struct subchannel *);
extern int cio_start (struct subchannel *, struct ccw1 *, __u8);
extern int cio_start_key (struct subchannel *, struct ccw1 *, __u8, __u8);
extern int cio_cancel (struct subchannel *);
extern int cio_set_options (struct subchannel *, int);
extern int cio_get_options (struct subchannel *);
extern int cio_update_schib(struct subchannel *sch);
extern int cio_commit_config(struct subchannel *sch);
int cio_tm_start_key(struct subchannel *sch, struct tcw *tcw, u8 lpm, u8 key);
int cio_tm_intrg(struct subchannel *sch);
int cio_create_sch_lock(struct subchannel *);
void do_adapter_IO(u8 isc);
void do_IRQ(struct pt_regs *);
/* Use with care. */
#ifdef CONFIG_CCW_CONSOLE
extern struct subchannel *cio_probe_console(void);
extern void cio_release_console(void);
extern int cio_is_console(struct subchannel_id);
extern struct subchannel *cio_get_console_subchannel(void);
extern spinlock_t * cio_get_console_lock(void);
extern void *cio_get_console_priv(void);
extern const char *cio_get_console_sch_name(struct subchannel_id schid);
extern const char *cio_get_console_cdev_name(struct subchannel *sch);
#else
#define cio_is_console(schid) 0
#define cio_get_console_subchannel() NULL
#define cio_get_console_lock() NULL
#define cio_get_console_priv() NULL
#define cio_get_console_sch_name(schid) NULL
#define cio_get_console_cdev_name(sch) NULL
#endif
#endif