6ab3d5624e
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
156 lines
4.8 KiB
C
156 lines
4.8 KiB
C
/*
|
|
* TQM8xx(L) board specific definitions
|
|
*
|
|
* Copyright (c) 1999-2002 Wolfgang Denk (wd@denx.de)
|
|
*/
|
|
|
|
#ifdef __KERNEL__
|
|
#ifndef __MACH_TQM8xx_H
|
|
#define __MACH_TQM8xx_H
|
|
|
|
|
|
#include <asm/ppcboot.h>
|
|
|
|
#ifndef __ASSEMBLY__
|
|
#define TQM_IMMR_BASE 0xFFF00000 /* phys. addr of IMMR */
|
|
#define TQM_IMAP_SIZE (64 * 1024) /* size of mapped area */
|
|
|
|
#define IMAP_ADDR TQM_IMMR_BASE /* physical base address of IMMR area */
|
|
#define IMAP_SIZE TQM_IMAP_SIZE /* mapped size of IMMR area */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* PCMCIA stuff
|
|
*-----------------------------------------------------------------------
|
|
*
|
|
*/
|
|
#define PCMCIA_MEM_SIZE ( 64 << 20 )
|
|
|
|
#ifndef CONFIG_KUP4K
|
|
# define MAX_HWIFS 1 /* overwrite default in include/asm-ppc/ide.h */
|
|
|
|
#else /* CONFIG_KUP4K */
|
|
|
|
# define MAX_HWIFS 2 /* overwrite default in include/asm-ppc/ide.h */
|
|
# ifndef __ASSEMBLY__
|
|
# include <asm/8xx_immap.h>
|
|
static __inline__ void ide_led(int on)
|
|
{
|
|
volatile immap_t *immap = (immap_t *)IMAP_ADDR;
|
|
|
|
if (on) {
|
|
immap->im_ioport.iop_padat &= ~0x80;
|
|
} else {
|
|
immap->im_ioport.iop_padat |= 0x80;
|
|
}
|
|
}
|
|
# endif /* __ASSEMBLY__ */
|
|
# define IDE_LED(x) ide_led((x))
|
|
#endif /* CONFIG_KUP4K */
|
|
|
|
/*
|
|
* Definitions for IDE0 Interface
|
|
*/
|
|
#define IDE0_BASE_OFFSET 0
|
|
#define IDE0_DATA_REG_OFFSET (PCMCIA_MEM_SIZE + 0x320)
|
|
#define IDE0_ERROR_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 1)
|
|
#define IDE0_NSECTOR_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 2)
|
|
#define IDE0_SECTOR_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 3)
|
|
#define IDE0_LCYL_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 4)
|
|
#define IDE0_HCYL_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 5)
|
|
#define IDE0_SELECT_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 6)
|
|
#define IDE0_STATUS_REG_OFFSET (2 * PCMCIA_MEM_SIZE + 0x320 + 7)
|
|
#define IDE0_CONTROL_REG_OFFSET 0x0106
|
|
#define IDE0_IRQ_REG_OFFSET 0x000A /* not used */
|
|
|
|
/* define IO_BASE for PCMCIA */
|
|
#define _IO_BASE 0x80000000
|
|
#define _IO_BASE_SIZE (64<<10)
|
|
|
|
#define FEC_INTERRUPT 9 /* = SIU_LEVEL4 */
|
|
#define PHY_INTERRUPT 12 /* = IRQ6 */
|
|
#define IDE0_INTERRUPT 13
|
|
|
|
#ifdef CONFIG_IDE
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* CPM Ethernet through SCCx.
|
|
*-----------------------------------------------------------------------
|
|
*
|
|
*/
|
|
|
|
/*** TQM823L, TQM850L ***********************************************/
|
|
|
|
#if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L)
|
|
/* Bits in parallel I/O port registers that have to be set/cleared
|
|
* to configure the pins for SCC1 use.
|
|
*/
|
|
#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */
|
|
#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */
|
|
#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */
|
|
#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */
|
|
|
|
#define PB_ENET_TENA ((uint)0x00002000) /* PB 18 */
|
|
|
|
#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */
|
|
#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */
|
|
|
|
/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
|
|
* SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
|
|
*/
|
|
#define SICR_ENET_MASK ((uint)0x0000ff00)
|
|
#define SICR_ENET_CLKRT ((uint)0x00002600)
|
|
#endif /* CONFIG_TQM823L, CONFIG_TQM850L */
|
|
|
|
/*** TQM860L ********************************************************/
|
|
|
|
#ifdef CONFIG_TQM860L
|
|
/* Bits in parallel I/O port registers that have to be set/cleared
|
|
* to configure the pins for SCC1 use.
|
|
*/
|
|
#define PA_ENET_RXD ((ushort)0x0001) /* PA 15 */
|
|
#define PA_ENET_TXD ((ushort)0x0002) /* PA 14 */
|
|
#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */
|
|
#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */
|
|
|
|
#define PC_ENET_TENA ((ushort)0x0001) /* PC 15 */
|
|
#define PC_ENET_CLSN ((ushort)0x0010) /* PC 11 */
|
|
#define PC_ENET_RENA ((ushort)0x0020) /* PC 10 */
|
|
|
|
/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK1) to
|
|
* SCC1. Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
|
|
*/
|
|
#define SICR_ENET_MASK ((uint)0x000000ff)
|
|
#define SICR_ENET_CLKRT ((uint)0x00000026)
|
|
#endif /* CONFIG_TQM860L */
|
|
|
|
/*** FPS850L *********************************************************/
|
|
|
|
#ifdef CONFIG_FPS850L
|
|
/* Bits in parallel I/O port registers that have to be set/cleared
|
|
* to configure the pins for SCC1 use.
|
|
*/
|
|
#define PA_ENET_RXD ((ushort)0x0004) /* PA 13 */
|
|
#define PA_ENET_TXD ((ushort)0x0008) /* PA 12 */
|
|
#define PA_ENET_RCLK ((ushort)0x0100) /* PA 7 */
|
|
#define PA_ENET_TCLK ((ushort)0x0400) /* PA 5 */
|
|
|
|
#define PC_ENET_TENA ((ushort)0x0002) /* PC 14 */
|
|
#define PC_ENET_CLSN ((ushort)0x0040) /* PC 9 */
|
|
#define PC_ENET_RENA ((ushort)0x0080) /* PC 8 */
|
|
|
|
/* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
|
|
* SCC2. Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
|
|
*/
|
|
#define SICR_ENET_MASK ((uint)0x0000ff00)
|
|
#define SICR_ENET_CLKRT ((uint)0x00002600)
|
|
#endif /* CONFIG_FPS850L */
|
|
|
|
/* We don't use the 8259.
|
|
*/
|
|
#define NR_8259_INTS 0
|
|
|
|
#endif /* !__ASSEMBLY__ */
|
|
#endif /* __MACH_TQM8xx_H */
|
|
#endif /* __KERNEL__ */
|