tmp_suning_uos_patched/include/linux/mtd
Linus Torvalds 3f06962273 This pull-request contains the following changes for MTD:
MTD core changes:
 - New Hyperbus framework
 - New _is_locked (concat) implementation
 - Various cleanups
 
 NAND core changes:
 - use longest matching pattern in ->exec_op() default parser
 - export NAND operation tracer
 - add flag to indicate panic_write in MTD
 - use kzalloc() instead of kmalloc() and memset()
 
 Raw NAND controller drivers changes:
 - brcmnand:
   * fix BCH ECC layout for large page NAND parts
   * fallback to detected ecc-strength, ecc-step-size
   * when oops in progress use pio and interrupt polling
   * code refactor code to introduce helper functions
   * add support for v7.3 controller
 - FSMC:
   * use nand_op_trace for operation tracing
 - GPMI:
   * move all driver code into single file
   * various cleanups (including dmaengine changes)
   * use runtime PM to manage clocks
   * implement exec_op
 - MTK:
   * correct low level time calculation of r/w cycle
   * improve data sampling timing for read cycle
   * add validity check for CE# pin setting
   * fix wrongly assigned OOB buffer pointer issue
   * re-license MTK NAND driver as Dual MIT/GPL
 - STM32:
   * manage the get_irq error case
   * increase DMA completion timeouts
 
 Raw NAND chips drivers changes:
 - Macronix: add read-retry support
 
 Onenand driver changes:
 - add support for 8Gb datasize chips
 - avoid fall-through warnings
 
 SPI-NAND changes:
 - define macros for page-read ops with three-byte addresses
 - add support for two-byte device IDs and then for GigaDevice
   GD5F1GQ4UFxxG
 - add initial support for Paragon PN26G0xA
 - handle the case where the last page read has bitflips
 
 SPI-NOR core changes:
 - add support for the mt25ql02g and w25q16jv flashes
 - print error in case of jedec read id fails
 - is25lp256: add post BFPT fix to correct the addr_width
 
 SPI NOR controller drivers changes:
 - intel-spi: Add support for Intel Elkhart Lake SPI serial flash
 - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c
 - cadence-quadspi: add reset control
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAl0qLr4ACgkQJWrqGEe9
 VoQVCwf/ZCG5CldS3cs6B68kMJoZ/rJyJxBnxtIhffda2vw1KG/12o6XaDO9xA/R
 EwYrOTzlYZxzCZsNvWyHepG3Kj3d38CJ52ZqhavjpihwMlKKOgW/K39xuKWCrfxS
 sVMLz/UdrcsQfcPGAy7DSyqhzRAtupNxngCdEkIIMGFZWsv4uZfOFEGMrzUJ5RYN
 /okIyUE7Iz0dRq1/KXSl365V1MS8QP2eHFuHrUd38+kJ8TJnQjXX3Bmdul4aNTx+
 HIIpykovoAn5BZ0YA4lJL90zVoDOWysARwHIAMDvJa8zS0wDTU16Tj2M6AQK+a4x
 hbIOOkeX0hTKpJvy7/khli5y1bn2mw==
 =L+tV
 -----END PGP SIGNATURE-----

Merge tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD updates from Miquel Raynal:
 "This contains the following changes for MTD:

  MTD core changes:
   - New Hyperbus framework
   - New _is_locked (concat) implementation
   - Various cleanups

  NAND core changes:
   - use longest matching pattern in ->exec_op() default parser
   - export NAND operation tracer
   - add flag to indicate panic_write in MTD
   - use kzalloc() instead of kmalloc() and memset()

  Raw NAND controller drivers changes:
   - brcmnand:
       - fix BCH ECC layout for large page NAND parts
       - fallback to detected ecc-strength, ecc-step-size
       - when oops in progress use pio and interrupt polling
       - code refactor code to introduce helper functions
       - add support for v7.3 controller
   - FSMC:
       - use nand_op_trace for operation tracing
   - GPMI:
       - move all driver code into single file
       - various cleanups (including dmaengine changes)
       - use runtime PM to manage clocks
       - implement exec_op
   - MTK:
       - correct low level time calculation of r/w cycle
       - improve data sampling timing for read cycle
       - add validity check for CE# pin setting
       - fix wrongly assigned OOB buffer pointer issue
       - re-license MTK NAND driver as Dual MIT/GPL
   - STM32:
       - manage the get_irq error case
       - increase DMA completion timeouts

  Raw NAND chips drivers changes:
   - Macronix: add read-retry support

  Onenand driver changes:
   - add support for 8Gb datasize chips
   - avoid fall-through warnings

  SPI-NAND changes:
   - define macros for page-read ops with three-byte addresses
   - add support for two-byte device IDs and then for GigaDevice
     GD5F1GQ4UFxxG
   - add initial support for Paragon PN26G0xA
   - handle the case where the last page read has bitflips

  SPI-NOR core changes:
   - add support for the mt25ql02g and w25q16jv flashes
   - print error in case of jedec read id fails
   - is25lp256: add post BFPT fix to correct the addr_width

  SPI NOR controller drivers changes:
   - intel-spi: Add support for Intel Elkhart Lake SPI serial flash
   - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c
   - cadence-quadspi: add reset control"

* tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (60 commits)
  mtd: concat: implement _is_locked mtd operation
  mtd: concat: refactor concat_lock/concat_unlock
  mtd: abi: do not use C++ style comments in uapi header
  mtd: afs: remove unneeded NULL check
  mtd: rawnand: stm32_fmc2: increase DMA completion timeouts
  mtd: rawnand: Use kzalloc() instead of kmalloc() and memset()
  mtd: hyperbus: Add driver for TI's HyperBus memory controller
  mtd: spinand: read returns badly if the last page has bitflips
  mtd: spinand: Add initial support for Paragon PN26G0xA
  mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL
  mtd: rawnand: gpmi: remove double assignment to block_size
  dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 support
  mtd: rawnand: brcmnand: Add support for v7.3 controller
  mtd: rawnand: brcmnand: Refactored code to introduce helper functions
  mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling
  mtd: Add flag to indicate panic_write
  mtd: rawnand: Add Macronix NAND read retry support
  mtd: onenand: Avoid fall-through warnings
  mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG
  mtd: spinand: Add support for two-byte device IDs
  ...
2019-07-13 15:42:44 -07:00
..
bbm.h
blktrans.h
cfi_endian.h
cfi.h NAND core changes: 2019-07-06 22:51:56 +02:00
concat.h
doc2000.h
flashchip.h
ftl.h
gen_probe.h
hyperbus.h mtd: Add support for HyperBus memory devices 2019-06-27 19:47:58 +02:00
inftl.h
jedec.h
latch-addr-flash.h
lpc32xx_mlc.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
lpc32xx_slc.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
map.h
mtd.h mtd: Add flag to indicate panic_write 2019-06-27 20:06:40 +02:00
mtdram.h
nand_bch.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
nand_ecc.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
nand-gpio.h
nand.h
ndfc.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
nftl.h
onenand_regs.h This pull-request contains the following changes for MTD: 2019-07-13 15:42:44 -07:00
onenand.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
onfi.h
partitions.h
pfow.h
physmap.h
pismo.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 178 2019-05-30 11:29:19 -07:00
plat-ram.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
platnand.h
qinfo.h
rawnand.h This pull-request contains the following changes for MTD: 2019-07-13 15:42:44 -07:00
sh_flctl.h
sharpsl.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
spear_smi.h
spi-nor.h mtd: spi-nor: use 16-bit WRR command when QE is set on spansion flashes 2019-06-23 20:03:34 +02:00
spinand.h mtd: spinand: Add initial support for Paragon PN26G0xA 2019-06-27 20:13:07 +02:00
super.h
ubi.h
xip.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00