tmp_suning_uos_patched/drivers/mfd/db5500-prcmu.c
Linus Walleij 8317797ca6 mfd: add DB5500 PRCMU driver
This adds the DB5500 PRCMU driver. Right now this one is pretty
restricted in functionality, exposing a simple interface to send
I2C messages.

Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-05-24 22:19:37 +02:00

449 lines
10 KiB
C

/*
* Copyright (C) ST-Ericsson SA 2010
*
* License Terms: GNU General Public License v2
* Author: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
*
* U5500 PRCM Unit interface driver
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/mutex.h>
#include <linux/completion.h>
#include <linux/irq.h>
#include <linux/jiffies.h>
#include <linux/bitops.h>
#include <linux/interrupt.h>
#include <linux/mfd/db5500-prcmu.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/db5500-regs.h>
#include "db5500-prcmu-regs.h"
#define _PRCM_MB_HEADER (tcdm_base + 0xFE8)
#define PRCM_REQ_MB0_HEADER (_PRCM_MB_HEADER + 0x0)
#define PRCM_REQ_MB1_HEADER (_PRCM_MB_HEADER + 0x1)
#define PRCM_REQ_MB2_HEADER (_PRCM_MB_HEADER + 0x2)
#define PRCM_REQ_MB3_HEADER (_PRCM_MB_HEADER + 0x3)
#define PRCM_REQ_MB4_HEADER (_PRCM_MB_HEADER + 0x4)
#define PRCM_REQ_MB5_HEADER (_PRCM_MB_HEADER + 0x5)
#define PRCM_REQ_MB6_HEADER (_PRCM_MB_HEADER + 0x6)
#define PRCM_REQ_MB7_HEADER (_PRCM_MB_HEADER + 0x7)
#define PRCM_ACK_MB0_HEADER (_PRCM_MB_HEADER + 0x8)
#define PRCM_ACK_MB1_HEADER (_PRCM_MB_HEADER + 0x9)
#define PRCM_ACK_MB2_HEADER (_PRCM_MB_HEADER + 0xa)
#define PRCM_ACK_MB3_HEADER (_PRCM_MB_HEADER + 0xb)
#define PRCM_ACK_MB4_HEADER (_PRCM_MB_HEADER + 0xc)
#define PRCM_ACK_MB5_HEADER (_PRCM_MB_HEADER + 0xd)
#define PRCM_ACK_MB6_HEADER (_PRCM_MB_HEADER + 0xe)
#define PRCM_ACK_MB7_HEADER (_PRCM_MB_HEADER + 0xf)
/* Req Mailboxes */
#define PRCM_REQ_MB0 (tcdm_base + 0xFD8)
#define PRCM_REQ_MB1 (tcdm_base + 0xFCC)
#define PRCM_REQ_MB2 (tcdm_base + 0xFC4)
#define PRCM_REQ_MB3 (tcdm_base + 0xFC0)
#define PRCM_REQ_MB4 (tcdm_base + 0xF98)
#define PRCM_REQ_MB5 (tcdm_base + 0xF90)
#define PRCM_REQ_MB6 (tcdm_base + 0xF8C)
#define PRCM_REQ_MB7 (tcdm_base + 0xF84)
/* Ack Mailboxes */
#define PRCM_ACK_MB0 (tcdm_base + 0xF38)
#define PRCM_ACK_MB1 (tcdm_base + 0xF30)
#define PRCM_ACK_MB2 (tcdm_base + 0xF24)
#define PRCM_ACK_MB3 (tcdm_base + 0xF20)
#define PRCM_ACK_MB4 (tcdm_base + 0xF1C)
#define PRCM_ACK_MB5 (tcdm_base + 0xF14)
#define PRCM_ACK_MB6 (tcdm_base + 0xF0C)
#define PRCM_ACK_MB7 (tcdm_base + 0xF08)
enum mb_return_code {
RC_SUCCESS,
RC_FAIL,
};
/* Mailbox 0 headers. */
enum mb0_header {
/* request */
RMB0H_PWR_STATE_TRANS = 1,
RMB0H_WAKE_UP_CFG,
RMB0H_RD_WAKE_UP_ACK,
/* acknowledge */
AMB0H_WAKE_UP = 1,
};
/* Mailbox 5 headers. */
enum mb5_header {
MB5H_I2C_WRITE = 1,
MB5H_I2C_READ,
};
/* Request mailbox 5 fields. */
#define PRCM_REQ_MB5_I2C_SLAVE (PRCM_REQ_MB5 + 0)
#define PRCM_REQ_MB5_I2C_REG (PRCM_REQ_MB5 + 1)
#define PRCM_REQ_MB5_I2C_SIZE (PRCM_REQ_MB5 + 2)
#define PRCM_REQ_MB5_I2C_DATA (PRCM_REQ_MB5 + 4)
/* Acknowledge mailbox 5 fields. */
#define PRCM_ACK_MB5_RETURN_CODE (PRCM_ACK_MB5 + 0)
#define PRCM_ACK_MB5_I2C_DATA (PRCM_ACK_MB5 + 4)
#define NUM_MB 8
#define MBOX_BIT BIT
#define ALL_MBOX_BITS (MBOX_BIT(NUM_MB) - 1)
/*
* Used by MCDE to setup all necessary PRCMU registers
*/
#define PRCMU_RESET_DSIPLL 0x00004000
#define PRCMU_UNCLAMP_DSIPLL 0x00400800
/* HDMI CLK MGT PLLSW=001 (PLLSOC0), PLLDIV=0x8, = 50 Mhz*/
#define PRCMU_DSI_CLOCK_SETTING 0x00000128
/* TVCLK_MGT PLLSW=001 (PLLSOC0) PLLDIV=0x13, = 19.05 MHZ */
#define PRCMU_DSI_LP_CLOCK_SETTING 0x00000135
#define PRCMU_PLLDSI_FREQ_SETTING 0x0004013C
#define PRCMU_DSI_PLLOUT_SEL_SETTING 0x00000002
#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV 0x03000101
#define PRCMU_DISABLE_ESCAPE_CLOCK_DIV 0x00000101
#define PRCMU_ENABLE_PLLDSI 0x00000001
#define PRCMU_DISABLE_PLLDSI 0x00000000
#define PRCMU_DSI_RESET_SW 0x00000003
#define PRCMU_PLLDSI_LOCKP_LOCKED 0x3
/*
* mb0_transfer - state needed for mailbox 0 communication.
* @lock: The transaction lock.
*/
static struct {
spinlock_t lock;
} mb0_transfer;
/*
* mb5_transfer - state needed for mailbox 5 communication.
* @lock: The transaction lock.
* @work: The transaction completion structure.
* @ack: Reply ("acknowledge") data.
*/
static struct {
struct mutex lock;
struct completion work;
struct {
u8 header;
u8 status;
u8 value[4];
} ack;
} mb5_transfer;
/* PRCMU TCDM base IO address. */
static __iomem void *tcdm_base;
/**
* db5500_prcmu_abb_read() - Read register value(s) from the ABB.
* @slave: The I2C slave address.
* @reg: The (start) register address.
* @value: The read out value(s).
* @size: The number of registers to read.
*
* Reads register value(s) from the ABB.
* @size has to be <= 4.
*/
int db5500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
{
int r;
if ((size < 1) || (4 < size))
return -EINVAL;
mutex_lock(&mb5_transfer.lock);
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
cpu_relax();
writeb(slave, PRCM_REQ_MB5_I2C_SLAVE);
writeb(reg, PRCM_REQ_MB5_I2C_REG);
writeb(size, PRCM_REQ_MB5_I2C_SIZE);
writeb(MB5H_I2C_READ, PRCM_REQ_MB5_HEADER);
writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
wait_for_completion(&mb5_transfer.work);
r = 0;
if ((mb5_transfer.ack.header == MB5H_I2C_READ) &&
(mb5_transfer.ack.status == RC_SUCCESS))
memcpy(value, mb5_transfer.ack.value, (size_t)size);
else
r = -EIO;
mutex_unlock(&mb5_transfer.lock);
return r;
}
/**
* db5500_prcmu_abb_write() - Write register value(s) to the ABB.
* @slave: The I2C slave address.
* @reg: The (start) register address.
* @value: The value(s) to write.
* @size: The number of registers to write.
*
* Writes register value(s) to the ABB.
* @size has to be <= 4.
*/
int db5500_prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
{
int r;
if ((size < 1) || (4 < size))
return -EINVAL;
mutex_lock(&mb5_transfer.lock);
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
cpu_relax();
writeb(slave, PRCM_REQ_MB5_I2C_SLAVE);
writeb(reg, PRCM_REQ_MB5_I2C_REG);
writeb(size, PRCM_REQ_MB5_I2C_SIZE);
memcpy_toio(PRCM_REQ_MB5_I2C_DATA, value, size);
writeb(MB5H_I2C_WRITE, PRCM_REQ_MB5_HEADER);
writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
wait_for_completion(&mb5_transfer.work);
if ((mb5_transfer.ack.header == MB5H_I2C_WRITE) &&
(mb5_transfer.ack.status == RC_SUCCESS))
r = 0;
else
r = -EIO;
mutex_unlock(&mb5_transfer.lock);
return r;
}
int db5500_prcmu_enable_dsipll(void)
{
int i;
/* Enable DSIPLL_RESETN resets */
writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_CLR);
/* Unclamp DSIPLL in/out */
writel(PRCMU_UNCLAMP_DSIPLL, PRCM_MMIP_LS_CLAMP_CLR);
/* Set DSI PLL FREQ */
writel(PRCMU_PLLDSI_FREQ_SETTING, PRCM_PLLDSI_FREQ);
writel(PRCMU_DSI_PLLOUT_SEL_SETTING,
PRCM_DSI_PLLOUT_SEL);
/* Enable Escape clocks */
writel(PRCMU_ENABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
/* Start DSI PLL */
writel(PRCMU_ENABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
/* Reset DSI PLL */
writel(PRCMU_DSI_RESET_SW, PRCM_DSI_SW_RESET);
for (i = 0; i < 10; i++) {
if ((readl(PRCM_PLLDSI_LOCKP) &
PRCMU_PLLDSI_LOCKP_LOCKED) == PRCMU_PLLDSI_LOCKP_LOCKED)
break;
udelay(100);
}
/* Release DSIPLL_RESETN */
writel(PRCMU_RESET_DSIPLL, PRCM_APE_RESETN_SET);
return 0;
}
int db5500_prcmu_disable_dsipll(void)
{
/* Disable dsi pll */
writel(PRCMU_DISABLE_PLLDSI, PRCM_PLLDSI_ENABLE);
/* Disable escapeclock */
writel(PRCMU_DISABLE_ESCAPE_CLOCK_DIV, PRCM_DSITVCLK_DIV);
return 0;
}
int db5500_prcmu_set_display_clocks(void)
{
/* HDMI and TVCLK Should be handled somewhere else */
/* PLLDIV=8, PLLSW=2, CLKEN=1 */
writel(PRCMU_DSI_CLOCK_SETTING, PRCM_HDMICLK_MGT);
/* PLLDIV=14, PLLSW=2, CLKEN=1 */
writel(PRCMU_DSI_LP_CLOCK_SETTING, PRCM_TVCLK_MGT);
return 0;
}
static void ack_dbb_wakeup(void)
{
unsigned long flags;
spin_lock_irqsave(&mb0_transfer.lock, flags);
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
cpu_relax();
writeb(RMB0H_RD_WAKE_UP_ACK, PRCM_REQ_MB0_HEADER);
writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
spin_unlock_irqrestore(&mb0_transfer.lock, flags);
}
static inline void print_unknown_header_warning(u8 n, u8 header)
{
pr_warning("prcmu: Unknown message header (%d) in mailbox %d.\n",
header, n);
}
static bool read_mailbox_0(void)
{
bool r;
u8 header;
header = readb(PRCM_ACK_MB0_HEADER);
switch (header) {
case AMB0H_WAKE_UP:
r = true;
break;
default:
print_unknown_header_warning(0, header);
r = false;
break;
}
writel(MBOX_BIT(0), PRCM_ARM_IT1_CLEAR);
return r;
}
static bool read_mailbox_1(void)
{
writel(MBOX_BIT(1), PRCM_ARM_IT1_CLEAR);
return false;
}
static bool read_mailbox_2(void)
{
writel(MBOX_BIT(2), PRCM_ARM_IT1_CLEAR);
return false;
}
static bool read_mailbox_3(void)
{
writel(MBOX_BIT(3), PRCM_ARM_IT1_CLEAR);
return false;
}
static bool read_mailbox_4(void)
{
writel(MBOX_BIT(4), PRCM_ARM_IT1_CLEAR);
return false;
}
static bool read_mailbox_5(void)
{
u8 header;
header = readb(PRCM_ACK_MB5_HEADER);
switch (header) {
case MB5H_I2C_READ:
memcpy_fromio(mb5_transfer.ack.value, PRCM_ACK_MB5_I2C_DATA, 4);
case MB5H_I2C_WRITE:
mb5_transfer.ack.header = header;
mb5_transfer.ack.status = readb(PRCM_ACK_MB5_RETURN_CODE);
complete(&mb5_transfer.work);
break;
default:
print_unknown_header_warning(5, header);
break;
}
writel(MBOX_BIT(5), PRCM_ARM_IT1_CLEAR);
return false;
}
static bool read_mailbox_6(void)
{
writel(MBOX_BIT(6), PRCM_ARM_IT1_CLEAR);
return false;
}
static bool read_mailbox_7(void)
{
writel(MBOX_BIT(7), PRCM_ARM_IT1_CLEAR);
return false;
}
static bool (* const read_mailbox[NUM_MB])(void) = {
read_mailbox_0,
read_mailbox_1,
read_mailbox_2,
read_mailbox_3,
read_mailbox_4,
read_mailbox_5,
read_mailbox_6,
read_mailbox_7
};
static irqreturn_t prcmu_irq_handler(int irq, void *data)
{
u32 bits;
u8 n;
irqreturn_t r;
bits = (readl(PRCM_ARM_IT1_VAL) & ALL_MBOX_BITS);
if (unlikely(!bits))
return IRQ_NONE;
r = IRQ_HANDLED;
for (n = 0; bits; n++) {
if (bits & MBOX_BIT(n)) {
bits -= MBOX_BIT(n);
if (read_mailbox[n]())
r = IRQ_WAKE_THREAD;
}
}
return r;
}
static irqreturn_t prcmu_irq_thread_fn(int irq, void *data)
{
ack_dbb_wakeup();
return IRQ_HANDLED;
}
void __init db5500_prcmu_early_init(void)
{
tcdm_base = __io_address(U5500_PRCMU_TCDM_BASE);
spin_lock_init(&mb0_transfer.lock);
mutex_init(&mb5_transfer.lock);
init_completion(&mb5_transfer.work);
}
/**
* prcmu_fw_init - arch init call for the Linux PRCMU fw init logic
*
*/
int __init db5500_prcmu_init(void)
{
int r = 0;
if (ux500_is_svp() || !cpu_is_u5500())
return -ENODEV;
/* Clean up the mailbox interrupts after pre-kernel code. */
writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLEAR);
r = request_threaded_irq(IRQ_DB5500_PRCMU1, prcmu_irq_handler,
prcmu_irq_thread_fn, 0, "prcmu", NULL);
if (r < 0) {
pr_err("prcmu: Failed to allocate IRQ_DB5500_PRCMU1.\n");
return -EBUSY;
}
return 0;
}
arch_initcall(db5500_prcmu_init);