tmp_suning_uos_patched/arch/arm/mach-orion5x/common.h
Lennert Buytenhek da01bba3cb [ARM] Orion: make PCI handling code deal with Cardbus slots
The Cardbus connector does not have an IDSEL signal, and Cardbus
cards are always the intended target of configuration transactions
on their local PCI bus.  This means that if the Orion's PCI bus
signals are hooked up to a Cardbus slot, the same set of PCI
functions will will appear 31 times, for each of the PCI device
IDs 1-31 (ID 0 is the host bridge).

This patch adds a function to the Orion PCI handling code that board
support code can call to enable Cardbus mode.  When Cardbus mode is
enabled, configuration transactions on the PCI local bus are only
allowed to PCI IDs 0 (host bridge) and 1 (cardbus device).

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
2008-06-30 16:04:44 -04:00

63 lines
1.8 KiB
C

#ifndef __ARCH_ORION5X_COMMON_H
#define __ARCH_ORION5X_COMMON_H
struct mv643xx_eth_platform_data;
struct mv_sata_platform_data;
/*
* Basic Orion init functions used early by machine-setup.
*/
void orion5x_map_io(void);
void orion5x_init_irq(void);
void orion5x_init(void);
extern struct sys_timer orion5x_timer;
/*
* Enumerations and functions for Orion windows mapping. Used by Orion core
* functions to map its interfaces and by the machine-setup to map its on-
* board devices. Details in /mach-orion/addr-map.c
*/
extern struct mbus_dram_target_info orion5x_mbus_dram_info;
void orion5x_setup_cpu_mbus_bridge(void);
void orion5x_setup_dev_boot_win(u32 base, u32 size);
void orion5x_setup_dev0_win(u32 base, u32 size);
void orion5x_setup_dev1_win(u32 base, u32 size);
void orion5x_setup_dev2_win(u32 base, u32 size);
void orion5x_setup_pcie_wa_win(u32 base, u32 size);
void orion5x_ehci0_init(void);
void orion5x_ehci1_init(void);
void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
void orion5x_i2c_init(void);
void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
void orion5x_uart0_init(void);
void orion5x_uart1_init(void);
/*
* PCIe/PCI functions.
*/
struct pci_bus;
struct pci_sys_data;
void orion5x_pcie_id(u32 *dev, u32 *rev);
void orion5x_pci_set_cardbus_mode(void);
int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys);
int orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin);
/*
* Valid GPIO pins according to MPP setup, used by machine-setup.
* (/mach-orion/gpio.c).
*/
void orion5x_gpio_set_valid(unsigned pin, int valid);
void gpio_display(void); /* debug */
struct machine_desc;
struct meminfo;
struct tag;
extern void __init tag_fixup_mem32(struct machine_desc *, struct tag *,
char **, struct meminfo *);
#endif