tmp_suning_uos_patched/fs/ext3/ioctl.c
Lukas Czerner 9c52749232 ext3: Add FITRIM handling
The ioctl takes fstrim_range structure (defined in include/linux/fs.h) as an
argument specifying a range of filesystem to trim and the minimum size of an
continguous extent to trim. After the FITRIM is done, the number of bytes
passed from the filesystem down the block stack to the device for potential
discard is stored in fstrim_range.len.  This number is a maximum discard amount
from the storage device's perspective, because FITRIM called repeatedly will
keep sending the same sectors for discard.  fstrim_range.len will report the
same potential discard bytes each time, but only sectors which had been written
to between the discards would actually be discarded by the storage device.
Further, the kernel block layer reserves the right to adjust the discard ranges
to fit raid stripe geometry, non-trim capable devices in a LVM setup, etc.
These reductions would not be reflected in fstrim_range.len.

Thus fstrim_range.len can give the user better insight on how much storage
space has potentially been released for wear-leveling, but it needs to be one
of only one criteria the userspace tools take into account when trying to
optimize calls to FITRIM.

Thanks to Greg Freemyer <greg.freemyer@gmail.com> for better commit message.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2011-01-10 19:04:05 +01:00

353 lines
8.2 KiB
C

/*
* linux/fs/ext3/ioctl.c
*
* Copyright (C) 1993, 1994, 1995
* Remy Card (card@masi.ibp.fr)
* Laboratoire MASI - Institut Blaise Pascal
* Universite Pierre et Marie Curie (Paris VI)
*/
#include <linux/fs.h>
#include <linux/jbd.h>
#include <linux/capability.h>
#include <linux/ext3_fs.h>
#include <linux/ext3_jbd.h>
#include <linux/mount.h>
#include <linux/time.h>
#include <linux/compat.h>
#include <asm/uaccess.h>
long ext3_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
struct inode *inode = filp->f_dentry->d_inode;
struct ext3_inode_info *ei = EXT3_I(inode);
unsigned int flags;
unsigned short rsv_window_size;
ext3_debug ("cmd = %u, arg = %lu\n", cmd, arg);
switch (cmd) {
case EXT3_IOC_GETFLAGS:
ext3_get_inode_flags(ei);
flags = ei->i_flags & EXT3_FL_USER_VISIBLE;
return put_user(flags, (int __user *) arg);
case EXT3_IOC_SETFLAGS: {
handle_t *handle = NULL;
int err;
struct ext3_iloc iloc;
unsigned int oldflags;
unsigned int jflag;
if (!is_owner_or_cap(inode))
return -EACCES;
if (get_user(flags, (int __user *) arg))
return -EFAULT;
err = mnt_want_write(filp->f_path.mnt);
if (err)
return err;
flags = ext3_mask_flags(inode->i_mode, flags);
mutex_lock(&inode->i_mutex);
/* Is it quota file? Do not allow user to mess with it */
err = -EPERM;
if (IS_NOQUOTA(inode))
goto flags_out;
oldflags = ei->i_flags;
/* The JOURNAL_DATA flag is modifiable only by root */
jflag = flags & EXT3_JOURNAL_DATA_FL;
/*
* The IMMUTABLE and APPEND_ONLY flags can only be changed by
* the relevant capability.
*
* This test looks nicer. Thanks to Pauline Middelink
*/
if ((flags ^ oldflags) & (EXT3_APPEND_FL | EXT3_IMMUTABLE_FL)) {
if (!capable(CAP_LINUX_IMMUTABLE))
goto flags_out;
}
/*
* The JOURNAL_DATA flag can only be changed by
* the relevant capability.
*/
if ((jflag ^ oldflags) & (EXT3_JOURNAL_DATA_FL)) {
if (!capable(CAP_SYS_RESOURCE))
goto flags_out;
}
handle = ext3_journal_start(inode, 1);
if (IS_ERR(handle)) {
err = PTR_ERR(handle);
goto flags_out;
}
if (IS_SYNC(inode))
handle->h_sync = 1;
err = ext3_reserve_inode_write(handle, inode, &iloc);
if (err)
goto flags_err;
flags = flags & EXT3_FL_USER_MODIFIABLE;
flags |= oldflags & ~EXT3_FL_USER_MODIFIABLE;
ei->i_flags = flags;
ext3_set_inode_flags(inode);
inode->i_ctime = CURRENT_TIME_SEC;
err = ext3_mark_iloc_dirty(handle, inode, &iloc);
flags_err:
ext3_journal_stop(handle);
if (err)
goto flags_out;
if ((jflag ^ oldflags) & (EXT3_JOURNAL_DATA_FL))
err = ext3_change_inode_journal_flag(inode, jflag);
flags_out:
mutex_unlock(&inode->i_mutex);
mnt_drop_write(filp->f_path.mnt);
return err;
}
case EXT3_IOC_GETVERSION:
case EXT3_IOC_GETVERSION_OLD:
return put_user(inode->i_generation, (int __user *) arg);
case EXT3_IOC_SETVERSION:
case EXT3_IOC_SETVERSION_OLD: {
handle_t *handle;
struct ext3_iloc iloc;
__u32 generation;
int err;
if (!is_owner_or_cap(inode))
return -EPERM;
err = mnt_want_write(filp->f_path.mnt);
if (err)
return err;
if (get_user(generation, (int __user *) arg)) {
err = -EFAULT;
goto setversion_out;
}
handle = ext3_journal_start(inode, 1);
if (IS_ERR(handle)) {
err = PTR_ERR(handle);
goto setversion_out;
}
err = ext3_reserve_inode_write(handle, inode, &iloc);
if (err == 0) {
inode->i_ctime = CURRENT_TIME_SEC;
inode->i_generation = generation;
err = ext3_mark_iloc_dirty(handle, inode, &iloc);
}
ext3_journal_stop(handle);
setversion_out:
mnt_drop_write(filp->f_path.mnt);
return err;
}
#ifdef CONFIG_JBD_DEBUG
case EXT3_IOC_WAIT_FOR_READONLY:
/*
* This is racy - by the time we're woken up and running,
* the superblock could be released. And the module could
* have been unloaded. So sue me.
*
* Returns 1 if it slept, else zero.
*/
{
struct super_block *sb = inode->i_sb;
DECLARE_WAITQUEUE(wait, current);
int ret = 0;
set_current_state(TASK_INTERRUPTIBLE);
add_wait_queue(&EXT3_SB(sb)->ro_wait_queue, &wait);
if (timer_pending(&EXT3_SB(sb)->turn_ro_timer)) {
schedule();
ret = 1;
}
remove_wait_queue(&EXT3_SB(sb)->ro_wait_queue, &wait);
return ret;
}
#endif
case EXT3_IOC_GETRSVSZ:
if (test_opt(inode->i_sb, RESERVATION)
&& S_ISREG(inode->i_mode)
&& ei->i_block_alloc_info) {
rsv_window_size = ei->i_block_alloc_info->rsv_window_node.rsv_goal_size;
return put_user(rsv_window_size, (int __user *)arg);
}
return -ENOTTY;
case EXT3_IOC_SETRSVSZ: {
int err;
if (!test_opt(inode->i_sb, RESERVATION) ||!S_ISREG(inode->i_mode))
return -ENOTTY;
err = mnt_want_write(filp->f_path.mnt);
if (err)
return err;
if (!is_owner_or_cap(inode)) {
err = -EACCES;
goto setrsvsz_out;
}
if (get_user(rsv_window_size, (int __user *)arg)) {
err = -EFAULT;
goto setrsvsz_out;
}
if (rsv_window_size > EXT3_MAX_RESERVE_BLOCKS)
rsv_window_size = EXT3_MAX_RESERVE_BLOCKS;
/*
* need to allocate reservation structure for this inode
* before set the window size
*/
mutex_lock(&ei->truncate_mutex);
if (!ei->i_block_alloc_info)
ext3_init_block_alloc_info(inode);
if (ei->i_block_alloc_info){
struct ext3_reserve_window_node *rsv = &ei->i_block_alloc_info->rsv_window_node;
rsv->rsv_goal_size = rsv_window_size;
}
mutex_unlock(&ei->truncate_mutex);
setrsvsz_out:
mnt_drop_write(filp->f_path.mnt);
return err;
}
case EXT3_IOC_GROUP_EXTEND: {
ext3_fsblk_t n_blocks_count;
struct super_block *sb = inode->i_sb;
int err, err2;
if (!capable(CAP_SYS_RESOURCE))
return -EPERM;
err = mnt_want_write(filp->f_path.mnt);
if (err)
return err;
if (get_user(n_blocks_count, (__u32 __user *)arg)) {
err = -EFAULT;
goto group_extend_out;
}
err = ext3_group_extend(sb, EXT3_SB(sb)->s_es, n_blocks_count);
journal_lock_updates(EXT3_SB(sb)->s_journal);
err2 = journal_flush(EXT3_SB(sb)->s_journal);
journal_unlock_updates(EXT3_SB(sb)->s_journal);
if (err == 0)
err = err2;
group_extend_out:
mnt_drop_write(filp->f_path.mnt);
return err;
}
case EXT3_IOC_GROUP_ADD: {
struct ext3_new_group_data input;
struct super_block *sb = inode->i_sb;
int err, err2;
if (!capable(CAP_SYS_RESOURCE))
return -EPERM;
err = mnt_want_write(filp->f_path.mnt);
if (err)
return err;
if (copy_from_user(&input, (struct ext3_new_group_input __user *)arg,
sizeof(input))) {
err = -EFAULT;
goto group_add_out;
}
err = ext3_group_add(sb, &input);
journal_lock_updates(EXT3_SB(sb)->s_journal);
err2 = journal_flush(EXT3_SB(sb)->s_journal);
journal_unlock_updates(EXT3_SB(sb)->s_journal);
if (err == 0)
err = err2;
group_add_out:
mnt_drop_write(filp->f_path.mnt);
return err;
}
case FITRIM: {
struct super_block *sb = inode->i_sb;
struct fstrim_range range;
int ret = 0;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (copy_from_user(&range, (struct fstrim_range *)arg,
sizeof(range)))
return -EFAULT;
ret = ext3_trim_fs(sb, &range);
if (ret < 0)
return ret;
if (copy_to_user((struct fstrim_range *)arg, &range,
sizeof(range)))
return -EFAULT;
return 0;
}
default:
return -ENOTTY;
}
}
#ifdef CONFIG_COMPAT
long ext3_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
/* These are just misnamed, they actually get/put from/to user an int */
switch (cmd) {
case EXT3_IOC32_GETFLAGS:
cmd = EXT3_IOC_GETFLAGS;
break;
case EXT3_IOC32_SETFLAGS:
cmd = EXT3_IOC_SETFLAGS;
break;
case EXT3_IOC32_GETVERSION:
cmd = EXT3_IOC_GETVERSION;
break;
case EXT3_IOC32_SETVERSION:
cmd = EXT3_IOC_SETVERSION;
break;
case EXT3_IOC32_GROUP_EXTEND:
cmd = EXT3_IOC_GROUP_EXTEND;
break;
case EXT3_IOC32_GETVERSION_OLD:
cmd = EXT3_IOC_GETVERSION_OLD;
break;
case EXT3_IOC32_SETVERSION_OLD:
cmd = EXT3_IOC_SETVERSION_OLD;
break;
#ifdef CONFIG_JBD_DEBUG
case EXT3_IOC32_WAIT_FOR_READONLY:
cmd = EXT3_IOC_WAIT_FOR_READONLY;
break;
#endif
case EXT3_IOC32_GETRSVSZ:
cmd = EXT3_IOC_GETRSVSZ;
break;
case EXT3_IOC32_SETRSVSZ:
cmd = EXT3_IOC_SETRSVSZ;
break;
case EXT3_IOC_GROUP_ADD:
break;
default:
return -ENOIOCTLCMD;
}
return ext3_ioctl(file, cmd, (unsigned long) compat_ptr(arg));
}
#endif