tmp_suning_uos_patched/arch/arm/mm/cache-v4wb.S
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

217 lines
5.4 KiB
ArmAsm

/*
* linux/arch/arm/mm/cache-v4wb.S
*
* Copyright (C) 1997-2002 Russell king
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/config.h>
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/hardware.h>
#include <asm/page.h>
#include "proc-macros.S"
/*
* The size of one data cache line.
*/
#define CACHE_DLINESIZE 32
/*
* The total size of the data cache.
*/
#if defined(CONFIG_CPU_SA110)
# define CACHE_DSIZE 16384
#elif defined(CONFIG_CPU_SA1100)
# define CACHE_DSIZE 8192
#else
# error Unknown cache size
#endif
/*
* This is the size at which it becomes more efficient to
* clean the whole cache, rather than using the individual
* cache line maintainence instructions.
*
* Size Clean (ticks) Dirty (ticks)
* 4096 21 20 21 53 55 54
* 8192 40 41 40 106 100 102
* 16384 77 77 76 140 140 138
* 32768 150 149 150 214 216 212 <---
* 65536 296 297 296 351 358 361
* 131072 591 591 591 656 657 651
* Whole 132 136 132 221 217 207 <---
*/
#define CACHE_DLIMIT (CACHE_DSIZE * 4)
/*
* flush_user_cache_all()
*
* Clean and invalidate all cache entries in a particular address
* space.
*/
ENTRY(v4wb_flush_user_cache_all)
/* FALLTHROUGH */
/*
* flush_kern_cache_all()
*
* Clean and invalidate the entire cache.
*/
ENTRY(v4wb_flush_kern_cache_all)
mov ip, #0
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
__flush_whole_cache:
mov r0, #FLUSH_BASE
add r1, r0, #CACHE_DSIZE
1: ldr r2, [r0], #32
cmp r0, r1
blo 1b
mcr p15, 0, ip, c7, c10, 4 @ drain write buffer
mov pc, lr
/*
* flush_user_cache_range(start, end, flags)
*
* Invalidate a range of cache entries in the specified
* address space.
*
* - start - start address (inclusive, page aligned)
* - end - end address (exclusive, page aligned)
* - flags - vma_area_struct flags describing address space
*/
ENTRY(v4wb_flush_user_cache_range)
sub r3, r1, r0 @ calculate total size
tst r2, #VM_EXEC @ executable region?
mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
cmp r3, #CACHE_DLIMIT @ total size >= limit?
bhs __flush_whole_cache @ flush whole D cache
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
tst r2, #VM_EXEC
mcrne p15, 0, ip, c7, c10, 4 @ drain write buffer
mov pc, lr
/*
* flush_kern_dcache_page(void *page)
*
* Ensure no D cache aliasing occurs, either with itself or
* the I cache
*
* - addr - page aligned address
*/
ENTRY(v4wb_flush_kern_dcache_page)
add r1, r0, #PAGE_SZ
/* fall through */
/*
* coherent_kern_range(start, end)
*
* Ensure coherency between the Icache and the Dcache in the
* region described by start. If you have non-snooping
* Harvard caches, you need to implement this function.
*
* - start - virtual start address
* - end - virtual end address
*/
ENTRY(v4wb_coherent_kern_range)
/* fall through */
/*
* coherent_user_range(start, end)
*
* Ensure coherency between the Icache and the Dcache in the
* region described by start. If you have non-snooping
* Harvard caches, you need to implement this function.
*
* - start - virtual start address
* - end - virtual end address
*/
ENTRY(v4wb_coherent_user_range)
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
mov ip, #0
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcr p15, 0, ip, c7, c10, 4 @ drain WB
mov pc, lr
/*
* dma_inv_range(start, end)
*
* Invalidate (discard) the specified virtual address range.
* May not write back any entries. If 'start' or 'end'
* are not cache line aligned, those lines must be written
* back.
*
* - start - virtual start address
* - end - virtual end address
*/
ENTRY(v4wb_dma_inv_range)
tst r0, #CACHE_DLINESIZE - 1
bic r0, r0, #CACHE_DLINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
tst r1, #CACHE_DLINESIZE - 1
mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mov pc, lr
/*
* dma_clean_range(start, end)
*
* Clean (write back) the specified virtual address range.
*
* - start - virtual start address
* - end - virtual end address
*/
ENTRY(v4wb_dma_clean_range)
bic r0, r0, #CACHE_DLINESIZE - 1
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
blo 1b
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
mov pc, lr
/*
* dma_flush_range(start, end)
*
* Clean and invalidate the specified virtual address range.
*
* - start - virtual start address
* - end - virtual end address
*
* This is actually the same as v4wb_coherent_kern_range()
*/
.globl v4wb_dma_flush_range
.set v4wb_dma_flush_range, v4wb_coherent_kern_range
__INITDATA
.type v4wb_cache_fns, #object
ENTRY(v4wb_cache_fns)
.long v4wb_flush_kern_cache_all
.long v4wb_flush_user_cache_all
.long v4wb_flush_user_cache_range
.long v4wb_coherent_kern_range
.long v4wb_coherent_user_range
.long v4wb_flush_kern_dcache_page
.long v4wb_dma_inv_range
.long v4wb_dma_clean_range
.long v4wb_dma_flush_range
.size v4wb_cache_fns, . - v4wb_cache_fns