f16a4e960a
Apply const prefix to each possible place: the EEPROM tables, the static string arrays, the init verb tables, etc. Just for minor optimization and no functional changes. Link: https://lore.kernel.org/r/20200105144823.29547-17-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
753 lines
19 KiB
C
753 lines
19 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* ALSA driver for ICEnsemble VT1724 (Envy24HT)
|
|
*
|
|
* Lowlevel functions for ONKYO WAVIO SE-90PCI and SE-200PCI
|
|
*
|
|
* Copyright (c) 2007 Shin-ya Okada sh_okada(at)d4.dion.ne.jp
|
|
* (at) -> @
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <sound/core.h>
|
|
#include <sound/tlv.h>
|
|
|
|
#include "ice1712.h"
|
|
#include "envy24ht.h"
|
|
#include "se.h"
|
|
|
|
struct se_spec {
|
|
struct {
|
|
unsigned char ch1, ch2;
|
|
} vol[8];
|
|
};
|
|
|
|
/****************************************************************************/
|
|
/* ONKYO WAVIO SE-200PCI */
|
|
/****************************************************************************/
|
|
/*
|
|
* system configuration ICE_EEP2_SYSCONF=0x4b
|
|
* XIN1 49.152MHz
|
|
* not have UART
|
|
* one stereo ADC and a S/PDIF receiver connected
|
|
* four stereo DACs connected
|
|
*
|
|
* AC-Link configuration ICE_EEP2_ACLINK=0x80
|
|
* use I2C, not use AC97
|
|
*
|
|
* I2S converters feature ICE_EEP2_I2S=0x78
|
|
* I2S codec has no volume/mute control feature
|
|
* I2S codec supports 96KHz and 192KHz
|
|
* I2S codec 24bits
|
|
*
|
|
* S/PDIF configuration ICE_EEP2_SPDIF=0xc3
|
|
* Enable integrated S/PDIF transmitter
|
|
* internal S/PDIF out implemented
|
|
* S/PDIF is stereo
|
|
* External S/PDIF out implemented
|
|
*
|
|
*
|
|
* ** connected chips **
|
|
*
|
|
* WM8740
|
|
* A 2ch-DAC of main outputs.
|
|
* It setuped as I2S mode by wire, so no way to setup from software.
|
|
* The sample-rate are automatically changed.
|
|
* ML/I2S (28pin) --------+
|
|
* MC/DM1 (27pin) -- 5V |
|
|
* MD/DM0 (26pin) -- GND |
|
|
* MUTEB (25pin) -- NC |
|
|
* MODE (24pin) -- GND |
|
|
* CSBIW (23pin) --------+
|
|
* |
|
|
* RSTB (22pin) --R(1K)-+
|
|
* Probably it reduce the noise from the control line.
|
|
*
|
|
* WM8766
|
|
* A 6ch-DAC for surrounds.
|
|
* It's control wire was connected to GPIOxx (3-wire serial interface)
|
|
* ML/I2S (11pin) -- GPIO18
|
|
* MC/IWL (12pin) -- GPIO17
|
|
* MD/DM (13pin) -- GPIO16
|
|
* MUTE (14pin) -- GPIO01
|
|
*
|
|
* WM8776
|
|
* A 2ch-ADC(with 10ch-selector) plus 2ch-DAC.
|
|
* It's control wire was connected to SDA/SCLK (2-wire serial interface)
|
|
* MODE (16pin) -- R(1K) -- GND
|
|
* CE (17pin) -- R(1K) -- GND 2-wire mode (address=0x34)
|
|
* DI (18pin) -- SDA
|
|
* CL (19pin) -- SCLK
|
|
*
|
|
*
|
|
* ** output pins and device names **
|
|
*
|
|
* 7.1ch name -- output connector color -- device (-D option)
|
|
*
|
|
* FRONT 2ch -- green -- plughw:0,0
|
|
* CENTER(Lch) SUBWOOFER(Rch) -- black -- plughw:0,2,0
|
|
* SURROUND 2ch -- orange -- plughw:0,2,1
|
|
* SURROUND BACK 2ch -- white -- plughw:0,2,2
|
|
*
|
|
*/
|
|
|
|
|
|
/****************************************************************************/
|
|
/* WM8740 interface */
|
|
/****************************************************************************/
|
|
|
|
static void se200pci_WM8740_init(struct snd_ice1712 *ice)
|
|
{
|
|
/* nothing to do */
|
|
}
|
|
|
|
|
|
static void se200pci_WM8740_set_pro_rate(struct snd_ice1712 *ice,
|
|
unsigned int rate)
|
|
{
|
|
/* nothing to do */
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* WM8766 interface */
|
|
/****************************************************************************/
|
|
|
|
static void se200pci_WM8766_write(struct snd_ice1712 *ice,
|
|
unsigned int addr, unsigned int data)
|
|
{
|
|
unsigned int st;
|
|
unsigned int bits;
|
|
int i;
|
|
const unsigned int DATA = 0x010000;
|
|
const unsigned int CLOCK = 0x020000;
|
|
const unsigned int LOAD = 0x040000;
|
|
const unsigned int ALL_MASK = (DATA | CLOCK | LOAD);
|
|
|
|
snd_ice1712_save_gpio_status(ice);
|
|
|
|
st = ((addr & 0x7f) << 9) | (data & 0x1ff);
|
|
snd_ice1712_gpio_set_dir(ice, ice->gpio.direction | ALL_MASK);
|
|
snd_ice1712_gpio_set_mask(ice, ice->gpio.write_mask & ~ALL_MASK);
|
|
bits = snd_ice1712_gpio_read(ice) & ~ALL_MASK;
|
|
|
|
snd_ice1712_gpio_write(ice, bits);
|
|
for (i = 0; i < 16; i++) {
|
|
udelay(1);
|
|
bits &= ~CLOCK;
|
|
st = (st << 1);
|
|
if (st & 0x10000)
|
|
bits |= DATA;
|
|
else
|
|
bits &= ~DATA;
|
|
|
|
snd_ice1712_gpio_write(ice, bits);
|
|
|
|
udelay(1);
|
|
bits |= CLOCK;
|
|
snd_ice1712_gpio_write(ice, bits);
|
|
}
|
|
|
|
udelay(1);
|
|
bits |= LOAD;
|
|
snd_ice1712_gpio_write(ice, bits);
|
|
|
|
udelay(1);
|
|
bits |= (DATA | CLOCK);
|
|
snd_ice1712_gpio_write(ice, bits);
|
|
|
|
snd_ice1712_restore_gpio_status(ice);
|
|
}
|
|
|
|
static void se200pci_WM8766_set_volume(struct snd_ice1712 *ice, int ch,
|
|
unsigned int vol1, unsigned int vol2)
|
|
{
|
|
switch (ch) {
|
|
case 0:
|
|
se200pci_WM8766_write(ice, 0x000, vol1);
|
|
se200pci_WM8766_write(ice, 0x001, vol2 | 0x100);
|
|
break;
|
|
case 1:
|
|
se200pci_WM8766_write(ice, 0x004, vol1);
|
|
se200pci_WM8766_write(ice, 0x005, vol2 | 0x100);
|
|
break;
|
|
case 2:
|
|
se200pci_WM8766_write(ice, 0x006, vol1);
|
|
se200pci_WM8766_write(ice, 0x007, vol2 | 0x100);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void se200pci_WM8766_init(struct snd_ice1712 *ice)
|
|
{
|
|
se200pci_WM8766_write(ice, 0x1f, 0x000); /* RESET ALL */
|
|
udelay(10);
|
|
|
|
se200pci_WM8766_set_volume(ice, 0, 0, 0); /* volume L=0 R=0 */
|
|
se200pci_WM8766_set_volume(ice, 1, 0, 0); /* volume L=0 R=0 */
|
|
se200pci_WM8766_set_volume(ice, 2, 0, 0); /* volume L=0 R=0 */
|
|
|
|
se200pci_WM8766_write(ice, 0x03, 0x022); /* serial mode I2S-24bits */
|
|
se200pci_WM8766_write(ice, 0x0a, 0x080); /* MCLK=256fs */
|
|
se200pci_WM8766_write(ice, 0x12, 0x000); /* MDP=0 */
|
|
se200pci_WM8766_write(ice, 0x15, 0x000); /* MDP=0 */
|
|
se200pci_WM8766_write(ice, 0x09, 0x000); /* demp=off mute=off */
|
|
|
|
se200pci_WM8766_write(ice, 0x02, 0x124); /* ch-assign L=L R=R RESET */
|
|
se200pci_WM8766_write(ice, 0x02, 0x120); /* ch-assign L=L R=R */
|
|
}
|
|
|
|
static void se200pci_WM8766_set_pro_rate(struct snd_ice1712 *ice,
|
|
unsigned int rate)
|
|
{
|
|
if (rate > 96000)
|
|
se200pci_WM8766_write(ice, 0x0a, 0x000); /* MCLK=128fs */
|
|
else
|
|
se200pci_WM8766_write(ice, 0x0a, 0x080); /* MCLK=256fs */
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* WM8776 interface */
|
|
/****************************************************************************/
|
|
|
|
static void se200pci_WM8776_write(struct snd_ice1712 *ice,
|
|
unsigned int addr, unsigned int data)
|
|
{
|
|
unsigned int val;
|
|
|
|
val = (addr << 9) | data;
|
|
snd_vt1724_write_i2c(ice, 0x34, val >> 8, val & 0xff);
|
|
}
|
|
|
|
|
|
static void se200pci_WM8776_set_output_volume(struct snd_ice1712 *ice,
|
|
unsigned int vol1, unsigned int vol2)
|
|
{
|
|
se200pci_WM8776_write(ice, 0x03, vol1);
|
|
se200pci_WM8776_write(ice, 0x04, vol2 | 0x100);
|
|
}
|
|
|
|
static void se200pci_WM8776_set_input_volume(struct snd_ice1712 *ice,
|
|
unsigned int vol1, unsigned int vol2)
|
|
{
|
|
se200pci_WM8776_write(ice, 0x0e, vol1);
|
|
se200pci_WM8776_write(ice, 0x0f, vol2 | 0x100);
|
|
}
|
|
|
|
static const char * const se200pci_sel[] = {
|
|
"LINE-IN", "CD-IN", "MIC-IN", "ALL-MIX", NULL
|
|
};
|
|
|
|
static void se200pci_WM8776_set_input_selector(struct snd_ice1712 *ice,
|
|
unsigned int sel)
|
|
{
|
|
static const unsigned char vals[] = {
|
|
/* LINE, CD, MIC, ALL, GND */
|
|
0x10, 0x04, 0x08, 0x1c, 0x03
|
|
};
|
|
if (sel > 4)
|
|
sel = 4;
|
|
se200pci_WM8776_write(ice, 0x15, vals[sel]);
|
|
}
|
|
|
|
static void se200pci_WM8776_set_afl(struct snd_ice1712 *ice, unsigned int afl)
|
|
{
|
|
/* AFL -- After Fader Listening */
|
|
if (afl)
|
|
se200pci_WM8776_write(ice, 0x16, 0x005);
|
|
else
|
|
se200pci_WM8776_write(ice, 0x16, 0x001);
|
|
}
|
|
|
|
static const char * const se200pci_agc[] = {
|
|
"Off", "LimiterMode", "ALCMode", NULL
|
|
};
|
|
|
|
static void se200pci_WM8776_set_agc(struct snd_ice1712 *ice, unsigned int agc)
|
|
{
|
|
/* AGC -- Auto Gain Control of the input */
|
|
switch (agc) {
|
|
case 0:
|
|
se200pci_WM8776_write(ice, 0x11, 0x000); /* Off */
|
|
break;
|
|
case 1:
|
|
se200pci_WM8776_write(ice, 0x10, 0x07b);
|
|
se200pci_WM8776_write(ice, 0x11, 0x100); /* LimiterMode */
|
|
break;
|
|
case 2:
|
|
se200pci_WM8776_write(ice, 0x10, 0x1fb);
|
|
se200pci_WM8776_write(ice, 0x11, 0x100); /* ALCMode */
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void se200pci_WM8776_init(struct snd_ice1712 *ice)
|
|
{
|
|
int i;
|
|
static const unsigned short default_values[] = {
|
|
0x100, 0x100, 0x100,
|
|
0x100, 0x100, 0x100,
|
|
0x000, 0x090, 0x000, 0x000,
|
|
0x022, 0x022, 0x022,
|
|
0x008, 0x0cf, 0x0cf, 0x07b, 0x000,
|
|
0x032, 0x000, 0x0a6, 0x001, 0x001
|
|
};
|
|
|
|
se200pci_WM8776_write(ice, 0x17, 0x000); /* reset all */
|
|
/* ADC and DAC interface is I2S 24bits mode */
|
|
/* The sample-rate are automatically changed */
|
|
udelay(10);
|
|
/* BUT my board can not do reset all, so I load all by manually. */
|
|
for (i = 0; i < ARRAY_SIZE(default_values); i++)
|
|
se200pci_WM8776_write(ice, i, default_values[i]);
|
|
|
|
se200pci_WM8776_set_input_selector(ice, 0);
|
|
se200pci_WM8776_set_afl(ice, 0);
|
|
se200pci_WM8776_set_agc(ice, 0);
|
|
se200pci_WM8776_set_input_volume(ice, 0, 0);
|
|
se200pci_WM8776_set_output_volume(ice, 0, 0);
|
|
|
|
/* head phone mute and power down */
|
|
se200pci_WM8776_write(ice, 0x00, 0);
|
|
se200pci_WM8776_write(ice, 0x01, 0);
|
|
se200pci_WM8776_write(ice, 0x02, 0x100);
|
|
se200pci_WM8776_write(ice, 0x0d, 0x080);
|
|
}
|
|
|
|
static void se200pci_WM8776_set_pro_rate(struct snd_ice1712 *ice,
|
|
unsigned int rate)
|
|
{
|
|
/* nothing to do */
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* runtime interface */
|
|
/****************************************************************************/
|
|
|
|
static void se200pci_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate)
|
|
{
|
|
se200pci_WM8740_set_pro_rate(ice, rate);
|
|
se200pci_WM8766_set_pro_rate(ice, rate);
|
|
se200pci_WM8776_set_pro_rate(ice, rate);
|
|
}
|
|
|
|
struct se200pci_control {
|
|
const char *name;
|
|
enum {
|
|
WM8766,
|
|
WM8776in,
|
|
WM8776out,
|
|
WM8776sel,
|
|
WM8776agc,
|
|
WM8776afl
|
|
} target;
|
|
enum { VOLUME1, VOLUME2, BOOLEAN, ENUM } type;
|
|
int ch;
|
|
const char * const *member;
|
|
const char *comment;
|
|
};
|
|
|
|
static const struct se200pci_control se200pci_cont[] = {
|
|
{
|
|
.name = "Front Playback Volume",
|
|
.target = WM8776out,
|
|
.type = VOLUME1,
|
|
.comment = "Front(green)"
|
|
},
|
|
{
|
|
.name = "Side Playback Volume",
|
|
.target = WM8766,
|
|
.type = VOLUME1,
|
|
.ch = 1,
|
|
.comment = "Surround(orange)"
|
|
},
|
|
{
|
|
.name = "Surround Playback Volume",
|
|
.target = WM8766,
|
|
.type = VOLUME1,
|
|
.ch = 2,
|
|
.comment = "SurroundBack(white)"
|
|
},
|
|
{
|
|
.name = "CLFE Playback Volume",
|
|
.target = WM8766,
|
|
.type = VOLUME1,
|
|
.ch = 0,
|
|
.comment = "Center(Lch)&SubWoofer(Rch)(black)"
|
|
},
|
|
{
|
|
.name = "Capture Volume",
|
|
.target = WM8776in,
|
|
.type = VOLUME2
|
|
},
|
|
{
|
|
.name = "Capture Select",
|
|
.target = WM8776sel,
|
|
.type = ENUM,
|
|
.member = se200pci_sel
|
|
},
|
|
{
|
|
.name = "AGC Capture Mode",
|
|
.target = WM8776agc,
|
|
.type = ENUM,
|
|
.member = se200pci_agc
|
|
},
|
|
{
|
|
.name = "AFL Bypass Playback Switch",
|
|
.target = WM8776afl,
|
|
.type = BOOLEAN
|
|
}
|
|
};
|
|
|
|
static int se200pci_get_enum_count(int n)
|
|
{
|
|
const char * const *member;
|
|
int c;
|
|
|
|
member = se200pci_cont[n].member;
|
|
if (!member)
|
|
return 0;
|
|
for (c = 0; member[c]; c++)
|
|
;
|
|
return c;
|
|
}
|
|
|
|
static int se200pci_cont_volume_info(struct snd_kcontrol *kc,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
|
|
uinfo->count = 2;
|
|
uinfo->value.integer.min = 0; /* mute */
|
|
uinfo->value.integer.max = 0xff; /* 0dB */
|
|
return 0;
|
|
}
|
|
|
|
#define se200pci_cont_boolean_info snd_ctl_boolean_mono_info
|
|
|
|
static int se200pci_cont_enum_info(struct snd_kcontrol *kc,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
int n, c;
|
|
|
|
n = kc->private_value;
|
|
c = se200pci_get_enum_count(n);
|
|
if (!c)
|
|
return -EINVAL;
|
|
return snd_ctl_enum_info(uinfo, 1, c, se200pci_cont[n].member);
|
|
}
|
|
|
|
static int se200pci_cont_volume_get(struct snd_kcontrol *kc,
|
|
struct snd_ctl_elem_value *uc)
|
|
{
|
|
struct snd_ice1712 *ice = snd_kcontrol_chip(kc);
|
|
struct se_spec *spec = ice->spec;
|
|
int n = kc->private_value;
|
|
uc->value.integer.value[0] = spec->vol[n].ch1;
|
|
uc->value.integer.value[1] = spec->vol[n].ch2;
|
|
return 0;
|
|
}
|
|
|
|
static int se200pci_cont_boolean_get(struct snd_kcontrol *kc,
|
|
struct snd_ctl_elem_value *uc)
|
|
{
|
|
struct snd_ice1712 *ice = snd_kcontrol_chip(kc);
|
|
struct se_spec *spec = ice->spec;
|
|
int n = kc->private_value;
|
|
uc->value.integer.value[0] = spec->vol[n].ch1;
|
|
return 0;
|
|
}
|
|
|
|
static int se200pci_cont_enum_get(struct snd_kcontrol *kc,
|
|
struct snd_ctl_elem_value *uc)
|
|
{
|
|
struct snd_ice1712 *ice = snd_kcontrol_chip(kc);
|
|
struct se_spec *spec = ice->spec;
|
|
int n = kc->private_value;
|
|
uc->value.enumerated.item[0] = spec->vol[n].ch1;
|
|
return 0;
|
|
}
|
|
|
|
static void se200pci_cont_update(struct snd_ice1712 *ice, int n)
|
|
{
|
|
struct se_spec *spec = ice->spec;
|
|
switch (se200pci_cont[n].target) {
|
|
case WM8766:
|
|
se200pci_WM8766_set_volume(ice,
|
|
se200pci_cont[n].ch,
|
|
spec->vol[n].ch1,
|
|
spec->vol[n].ch2);
|
|
break;
|
|
|
|
case WM8776in:
|
|
se200pci_WM8776_set_input_volume(ice,
|
|
spec->vol[n].ch1,
|
|
spec->vol[n].ch2);
|
|
break;
|
|
|
|
case WM8776out:
|
|
se200pci_WM8776_set_output_volume(ice,
|
|
spec->vol[n].ch1,
|
|
spec->vol[n].ch2);
|
|
break;
|
|
|
|
case WM8776sel:
|
|
se200pci_WM8776_set_input_selector(ice,
|
|
spec->vol[n].ch1);
|
|
break;
|
|
|
|
case WM8776agc:
|
|
se200pci_WM8776_set_agc(ice, spec->vol[n].ch1);
|
|
break;
|
|
|
|
case WM8776afl:
|
|
se200pci_WM8776_set_afl(ice, spec->vol[n].ch1);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int se200pci_cont_volume_put(struct snd_kcontrol *kc,
|
|
struct snd_ctl_elem_value *uc)
|
|
{
|
|
struct snd_ice1712 *ice = snd_kcontrol_chip(kc);
|
|
struct se_spec *spec = ice->spec;
|
|
int n = kc->private_value;
|
|
unsigned int vol1, vol2;
|
|
int changed;
|
|
|
|
changed = 0;
|
|
vol1 = uc->value.integer.value[0] & 0xff;
|
|
vol2 = uc->value.integer.value[1] & 0xff;
|
|
if (spec->vol[n].ch1 != vol1) {
|
|
spec->vol[n].ch1 = vol1;
|
|
changed = 1;
|
|
}
|
|
if (spec->vol[n].ch2 != vol2) {
|
|
spec->vol[n].ch2 = vol2;
|
|
changed = 1;
|
|
}
|
|
if (changed)
|
|
se200pci_cont_update(ice, n);
|
|
|
|
return changed;
|
|
}
|
|
|
|
static int se200pci_cont_boolean_put(struct snd_kcontrol *kc,
|
|
struct snd_ctl_elem_value *uc)
|
|
{
|
|
struct snd_ice1712 *ice = snd_kcontrol_chip(kc);
|
|
struct se_spec *spec = ice->spec;
|
|
int n = kc->private_value;
|
|
unsigned int vol1;
|
|
|
|
vol1 = !!uc->value.integer.value[0];
|
|
if (spec->vol[n].ch1 != vol1) {
|
|
spec->vol[n].ch1 = vol1;
|
|
se200pci_cont_update(ice, n);
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int se200pci_cont_enum_put(struct snd_kcontrol *kc,
|
|
struct snd_ctl_elem_value *uc)
|
|
{
|
|
struct snd_ice1712 *ice = snd_kcontrol_chip(kc);
|
|
struct se_spec *spec = ice->spec;
|
|
int n = kc->private_value;
|
|
unsigned int vol1;
|
|
|
|
vol1 = uc->value.enumerated.item[0];
|
|
if (vol1 >= se200pci_get_enum_count(n))
|
|
return -EINVAL;
|
|
if (spec->vol[n].ch1 != vol1) {
|
|
spec->vol[n].ch1 = vol1;
|
|
se200pci_cont_update(ice, n);
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const DECLARE_TLV_DB_SCALE(db_scale_gain1, -12750, 50, 1);
|
|
static const DECLARE_TLV_DB_SCALE(db_scale_gain2, -10350, 50, 1);
|
|
|
|
static int se200pci_add_controls(struct snd_ice1712 *ice)
|
|
{
|
|
int i;
|
|
struct snd_kcontrol_new cont;
|
|
int err;
|
|
|
|
memset(&cont, 0, sizeof(cont));
|
|
cont.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
|
|
for (i = 0; i < ARRAY_SIZE(se200pci_cont); i++) {
|
|
cont.private_value = i;
|
|
cont.name = se200pci_cont[i].name;
|
|
cont.access = SNDRV_CTL_ELEM_ACCESS_READWRITE;
|
|
cont.tlv.p = NULL;
|
|
switch (se200pci_cont[i].type) {
|
|
case VOLUME1:
|
|
case VOLUME2:
|
|
cont.info = se200pci_cont_volume_info;
|
|
cont.get = se200pci_cont_volume_get;
|
|
cont.put = se200pci_cont_volume_put;
|
|
cont.access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ;
|
|
if (se200pci_cont[i].type == VOLUME1)
|
|
cont.tlv.p = db_scale_gain1;
|
|
else
|
|
cont.tlv.p = db_scale_gain2;
|
|
break;
|
|
case BOOLEAN:
|
|
cont.info = se200pci_cont_boolean_info;
|
|
cont.get = se200pci_cont_boolean_get;
|
|
cont.put = se200pci_cont_boolean_put;
|
|
break;
|
|
case ENUM:
|
|
cont.info = se200pci_cont_enum_info;
|
|
cont.get = se200pci_cont_enum_get;
|
|
cont.put = se200pci_cont_enum_put;
|
|
break;
|
|
default:
|
|
snd_BUG();
|
|
return -EINVAL;
|
|
}
|
|
err = snd_ctl_add(ice->card, snd_ctl_new1(&cont, ice));
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* ONKYO WAVIO SE-90PCI */
|
|
/****************************************************************************/
|
|
/*
|
|
* system configuration ICE_EEP2_SYSCONF=0x4b
|
|
* AC-Link configuration ICE_EEP2_ACLINK=0x80
|
|
* I2S converters feature ICE_EEP2_I2S=0x78
|
|
* S/PDIF configuration ICE_EEP2_SPDIF=0xc3
|
|
*
|
|
* ** connected chip **
|
|
*
|
|
* WM8716
|
|
* A 2ch-DAC of main outputs.
|
|
* It setuped as I2S mode by wire, so no way to setup from software.
|
|
* ML/I2S (28pin) -- +5V
|
|
* MC/DM1 (27pin) -- GND
|
|
* MC/DM0 (26pin) -- GND
|
|
* MUTEB (25pin) -- open (internal pull-up)
|
|
* MODE (24pin) -- GND
|
|
* CSBIWO (23pin) -- +5V
|
|
*
|
|
*/
|
|
|
|
/* Nothing to do for this chip. */
|
|
|
|
|
|
/****************************************************************************/
|
|
/* probe/initialize/setup */
|
|
/****************************************************************************/
|
|
|
|
static int se_init(struct snd_ice1712 *ice)
|
|
{
|
|
struct se_spec *spec;
|
|
|
|
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
|
|
if (!spec)
|
|
return -ENOMEM;
|
|
ice->spec = spec;
|
|
|
|
if (ice->eeprom.subvendor == VT1724_SUBDEVICE_SE90PCI) {
|
|
ice->num_total_dacs = 2;
|
|
ice->num_total_adcs = 0;
|
|
ice->vt1720 = 1;
|
|
return 0;
|
|
|
|
} else if (ice->eeprom.subvendor == VT1724_SUBDEVICE_SE200PCI) {
|
|
ice->num_total_dacs = 8;
|
|
ice->num_total_adcs = 2;
|
|
se200pci_WM8740_init(ice);
|
|
se200pci_WM8766_init(ice);
|
|
se200pci_WM8776_init(ice);
|
|
ice->gpio.set_pro_rate = se200pci_set_pro_rate;
|
|
return 0;
|
|
}
|
|
|
|
return -ENOENT;
|
|
}
|
|
|
|
static int se_add_controls(struct snd_ice1712 *ice)
|
|
{
|
|
int err;
|
|
|
|
err = 0;
|
|
/* nothing to do for VT1724_SUBDEVICE_SE90PCI */
|
|
if (ice->eeprom.subvendor == VT1724_SUBDEVICE_SE200PCI)
|
|
err = se200pci_add_controls(ice);
|
|
|
|
return err;
|
|
}
|
|
|
|
|
|
/****************************************************************************/
|
|
/* entry point */
|
|
/****************************************************************************/
|
|
|
|
static const unsigned char se200pci_eeprom[] = {
|
|
[ICE_EEP2_SYSCONF] = 0x4b, /* 49.152Hz, spdif-in/ADC, 4DACs */
|
|
[ICE_EEP2_ACLINK] = 0x80, /* I2S */
|
|
[ICE_EEP2_I2S] = 0x78, /* 96k-ok, 24bit, 192k-ok */
|
|
[ICE_EEP2_SPDIF] = 0xc3, /* out-en, out-int, spdif-in */
|
|
|
|
[ICE_EEP2_GPIO_DIR] = 0x02, /* WM8766 mute 1=output */
|
|
[ICE_EEP2_GPIO_DIR1] = 0x00, /* not used */
|
|
[ICE_EEP2_GPIO_DIR2] = 0x07, /* WM8766 ML/MC/MD 1=output */
|
|
|
|
[ICE_EEP2_GPIO_MASK] = 0x00, /* 0=writable */
|
|
[ICE_EEP2_GPIO_MASK1] = 0x00, /* 0=writable */
|
|
[ICE_EEP2_GPIO_MASK2] = 0x00, /* 0=writable */
|
|
|
|
[ICE_EEP2_GPIO_STATE] = 0x00, /* WM8766 mute=0 */
|
|
[ICE_EEP2_GPIO_STATE1] = 0x00, /* not used */
|
|
[ICE_EEP2_GPIO_STATE2] = 0x07, /* WM8766 ML/MC/MD */
|
|
};
|
|
|
|
static const unsigned char se90pci_eeprom[] = {
|
|
[ICE_EEP2_SYSCONF] = 0x4b, /* 49.152Hz, spdif-in/ADC, 4DACs */
|
|
[ICE_EEP2_ACLINK] = 0x80, /* I2S */
|
|
[ICE_EEP2_I2S] = 0x78, /* 96k-ok, 24bit, 192k-ok */
|
|
[ICE_EEP2_SPDIF] = 0xc3, /* out-en, out-int, spdif-in */
|
|
|
|
/* ALL GPIO bits are in input mode */
|
|
};
|
|
|
|
struct snd_ice1712_card_info snd_vt1724_se_cards[] = {
|
|
{
|
|
.subvendor = VT1724_SUBDEVICE_SE200PCI,
|
|
.name = "ONKYO SE200PCI",
|
|
.model = "se200pci",
|
|
.chip_init = se_init,
|
|
.build_controls = se_add_controls,
|
|
.eeprom_size = sizeof(se200pci_eeprom),
|
|
.eeprom_data = se200pci_eeprom,
|
|
},
|
|
{
|
|
.subvendor = VT1724_SUBDEVICE_SE90PCI,
|
|
.name = "ONKYO SE90PCI",
|
|
.model = "se90pci",
|
|
.chip_init = se_init,
|
|
.build_controls = se_add_controls,
|
|
.eeprom_size = sizeof(se90pci_eeprom),
|
|
.eeprom_data = se90pci_eeprom,
|
|
},
|
|
{} /*terminator*/
|
|
};
|