luck/tmp_suning_uos_patched
1
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6210230725
tmp_suning_uos_patched/include/asm-sh/r7780rp.h
Paul Mundt 66a740572d sh: Convert INTC2 to IRQ table registration. 
Currently the INTC2 code contains a fixed IRQ table that it
iterates through to set the handler type, we move this in to
the CPU subtype setup code instead and allow for submitting
the table that way.

This drops the ST40 tables, as nothing has been happening
with those processors, while converting the only existing
users to use the new table directly (SH7760 and SH7780).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-20 15:30:55 +09:00

172 lines
9.2 KiB
C
Raw Blame History

#ifndef __ASM_SH_RENESAS_R7780RP_H
#define __ASM_SH_RENESAS_R7780RP_H
/*
* linux/include/asm-sh/r7780rp.h
*
* Copyright (C) 2000 Atom Create Engineering Co., Ltd.
*
* Renesas Solutions Highlander R7780RP support
*/
/* Box specific addresses. */
#if defined(CONFIG_SH_R7780MP)
#define PA_BCR 0xa4000000 /* FPGA */
#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */
#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */
#define PA_IRLPRI1 (PA_BCR+0x0004) /* Interrupt Priorty 1 */
#define PA_IRLPRI2 (PA_BCR+0x0006) /* Interrupt Priorty 2 */
#define PA_IRLPRI3 (PA_BCR+0x0008) /* Interrupt Priorty 3 */
#define PA_IRLPRI4 (PA_BCR+0x000a) /* Interrupt Priorty 4 */
#define PA_RSTCTL (PA_BCR+0x000c) /* Reset Control */
#define PA_PCIBD (PA_BCR+0x000e) /* PCI Board detect control */
#define PA_PCICD (PA_BCR+0x0010) /* PCI Conector detect control */
#define PA_EXTGIO (PA_BCR+0x0016) /* Extension GPIO Control */
#define PA_IVDRMON (PA_BCR+0x0018) /* iVDR Moniter control */
#define PA_IVDRCTL (PA_BCR+0x001a) /* iVDR control */
#define PA_OBLED (PA_BCR+0x001c) /* On Board LED control */
#define PA_OBSW (PA_BCR+0x001e) /* On Board Switch control */
#define PA_AUDIOSEL (PA_BCR+0x0020) /* Sound Interface Select control */
#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */
#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */
#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */
#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */
#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */
#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */
#define PA_DBSW (PA_BCR+0x0200) /* Debug Board Switch control */
#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */
#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */
#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */
#define PA_SCSMR0 (PA_BCR+0x0400) /* SCIF0 Serial mode control */
#define PA_SCBRR0 (PA_BCR+0x0404) /* SCIF0 Bit rate control */
#define PA_SCSCR0 (PA_BCR+0x0408) /* SCIF0 Serial control */
#define PA_SCFTDR0 (PA_BCR+0x040c) /* SCIF0 Send FIFO control */
#define PA_SCFSR0 (PA_BCR+0x0410) /* SCIF0 Serial status control */
#define PA_SCFRDR0 (PA_BCR+0x0414) /* SCIF0 Receive FIFO control */
#define PA_SCFCR0 (PA_BCR+0x0418) /* SCIF0 FIFO control */
#define PA_SCTFDR0 (PA_BCR+0x041c) /* SCIF0 Send FIFO data control */
#define PA_SCRFDR0 (PA_BCR+0x0420) /* SCIF0 Receive FIFO data control */
#define PA_SCSPTR0 (PA_BCR+0x0424) /* SCIF0 Serial Port control */
#define PA_SCLSR0 (PA_BCR+0x0428) /* SCIF0 Line Status control */
#define PA_SCRER0 (PA_BCR+0x042c) /* SCIF0 Serial Error control */
#define PA_SCSMR1 (PA_BCR+0x0500) /* SCIF1 Serial mode control */
#define PA_SCBRR1 (PA_BCR+0x0504) /* SCIF1 Bit rate control */
#define PA_SCSCR1 (PA_BCR+0x0508) /* SCIF1 Serial control */
#define PA_SCFTDR1 (PA_BCR+0x050c) /* SCIF1 Send FIFO control */
#define PA_SCFSR1 (PA_BCR+0x0510) /* SCIF1 Serial status control */
#define PA_SCFRDR1 (PA_BCR+0x0514) /* SCIF1 Receive FIFO control */
#define PA_SCFCR1 (PA_BCR+0x0518) /* SCIF1 FIFO control */
#define PA_SCTFDR1 (PA_BCR+0x051c) /* SCIF1 Send FIFO data control */
#define PA_SCRFDR1 (PA_BCR+0x0520) /* SCIF1 Receive FIFO data control */
#define PA_SCSPTR1 (PA_BCR+0x0524) /* SCIF1 Serial Port control */
#define PA_SCLSR1 (PA_BCR+0x0528) /* SCIF1 Line Status control */
#define PA_SCRER1 (PA_BCR+0x052c) /* SCIF1 Serial Error control */
#define PA_ICCR (PA_BCR+0x0600) /* Serial control */
#define PA_SAR (PA_BCR+0x0602) /* Serial Slave control */
#define PA_MDR (PA_BCR+0x0604) /* Serial Mode control */
#define PA_ADR1 (PA_BCR+0x0606) /* Serial Address1 control */
#define PA_DAR1 (PA_BCR+0x0646) /* Serial Data1 control */
#define PA_VERREG (PA_BCR+0x0700) /* FPGA Version Register */
#define PA_POFF (PA_BCR+0x0800) /* System Power Off control */
#define PA_PMR (PA_BCR+0x0900) /* */
#define PA_AX88796L 0xa4100400 /* AX88796L Area */
#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */
#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
#define IRQ_PCISLOT1 65 /* PCI Slot #1 IRQ */
#define IRQ_PCISLOT2 66 /* PCI Slot #2 IRQ */
#define IRQ_PCISLOT3 67 /* PCI Slot #3 IRQ */
#define IRQ_PCISLOT4 68 /* PCI Slot #4 IRQ */
// #define IRQ_CFINST 0 /* CF Card Insert IRQ */
#define IRQ_TP 2 /* Touch Panel IRQ */
#define IRQ_SCI1 3 /* SCI1 IRQ */
#define IRQ_SCI0 4 /* SCI0 IRQ */
#define IRQ_2SERIAL 5 /* Serial IRQ */
#define IRQ_RTC 6 /* RTC A / B IRQ */
#define IRQ_EXTENTION6 7 /* EXT6n IRQ */
#define IRQ_EXTENTION5 8 /* EXT5n IRQ */
#define IRQ_EXTENTION4 9 /* EXT4n IRQ */
#define IRQ_EXTENTION2 10 /* EXT2n IRQ */
#define IRQ_EXTENTION1 11 /* EXT1n IRQ */
#define IRQ_ONETH 13 /* On board Ethernet IRQ */
#define IRQ_PSW 14 /* Push Switch IRQ */
#else /* R7780RP */
#define PA_BCR 0xa5000000 /* FPGA */
#define PA_IRLMSK (PA_BCR+0x0000) /* Interrupt Mask control */
#define PA_IRLMON (PA_BCR+0x0002) /* Interrupt Status control */
#define PA_SDPOW (PA_BCR+0x0004) /* SD Power control */
#define PA_RSTCTL (PA_BCR+0x0006) /* Device Reset control */
#define PA_PCIBD (PA_BCR+0x0008) /* PCI Board detect control */
#define PA_PCICD (PA_BCR+0x000a) /* PCI Conector detect control */
#define PA_ZIGIO1 (PA_BCR+0x000c) /* Zigbee IO control 1 */
#define PA_ZIGIO2 (PA_BCR+0x000e) /* Zigbee IO control 2 */
#define PA_ZIGIO3 (PA_BCR+0x0010) /* Zigbee IO control 3 */
#define PA_ZIGIO4 (PA_BCR+0x0012) /* Zigbee IO control 4 */
#define PA_IVDRMON (PA_BCR+0x0014) /* iVDR Moniter control */
#define PA_IVDRCTL (PA_BCR+0x0016) /* iVDR control */
#define PA_OBLED (PA_BCR+0x0018) /* On Board LED control */
#define PA_OBSW (PA_BCR+0x001a) /* On Board Switch control */
#define PA_AUDIOSEL (PA_BCR+0x001c) /* Sound Interface Select control */
#define PA_EXTPLR (PA_BCR+0x001e) /* Extention Pin Polarity control */
#define PA_TPCTL (PA_BCR+0x0100) /* Touch Panel Access control */
#define PA_TPDCKCTL (PA_BCR+0x0102) /* Touch Panel Access data control */
#define PA_TPCTLCLR (PA_BCR+0x0104) /* Touch Panel Access control */
#define PA_TPXPOS (PA_BCR+0x0106) /* Touch Panel X position control */
#define PA_TPYPOS (PA_BCR+0x0108) /* Touch Panel Y position control */
#define PA_DBDET (PA_BCR+0x0200) /* Debug Board detect control */
#define PA_DBDISPCTL (PA_BCR+0x0202) /* Debug Board Dot timing control */
#define PA_DBSW (PA_BCR+0x0204) /* Debug Board Switch control */
#define PA_CFCTL (PA_BCR+0x0300) /* CF Timing control */
#define PA_CFPOW (PA_BCR+0x0302) /* CF Power control */
#define PA_CFCDINTCLR (PA_BCR+0x0304) /* CF Insert Interrupt clear */
#define PA_SCSMR (PA_BCR+0x0400) /* SCIF Serial mode control */
#define PA_SCBRR (PA_BCR+0x0402) /* SCIF Bit rate control */
#define PA_SCSCR (PA_BCR+0x0404) /* SCIF Serial control */
#define PA_SCFDTR (PA_BCR+0x0406) /* SCIF Send FIFO control */
#define PA_SCFSR (PA_BCR+0x0408) /* SCIF Serial status control */
#define PA_SCFRDR (PA_BCR+0x040a) /* SCIF Receive FIFO control */
#define PA_SCFCR (PA_BCR+0x040c) /* SCIF FIFO control */
#define PA_SCFDR (PA_BCR+0x040e) /* SCIF FIFO data control */
#define PA_SCLSR (PA_BCR+0x0412) /* SCIF Line Status control */
#define PA_ICCR (PA_BCR+0x0500) /* Serial control */
#define PA_SAR (PA_BCR+0x0502) /* Serial Slave control */
#define PA_MDR (PA_BCR+0x0504) /* Serial Mode control */
#define PA_ADR1 (PA_BCR+0x0506) /* Serial Address1 control */
#define PA_DAR1 (PA_BCR+0x0546) /* Serial Data1 control */
#define PA_VERREG (PA_BCR+0x0600) /* FPGA Version Register */
#define PA_AX88796L 0xa5800400 /* AX88796L Area */
#define PA_SC1602BSLB 0xa6000000 /* SC1602BSLB Area */
#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
#define IRQ_PCISLOT1 0 /* PCI Slot #1 IRQ */
#define IRQ_PCISLOT2 1 /* PCI Slot #2 IRQ */
#define IRQ_PCISLOT3 2 /* PCI Slot #3 IRQ */
#define IRQ_PCISLOT4 3 /* PCI Slot #4 IRQ */
#define IRQ_CFINST 5 /* CF Card Insert IRQ */
#define IRQ_M66596 6 /* M66596 IRQ */
#define IRQ_SDCARD 7 /* SD Card IRQ */
#define IRQ_TUCHPANEL 8 /* Touch Panel IRQ */
#define IRQ_SCI 9 /* SCI IRQ */
#define IRQ_2SERIAL 10 /* Serial IRQ */
#define IRQ_EXTENTION 11 /* EXTn IRQ */
#define IRQ_ONETH 12 /* On board Ethernet IRQ */
#define IRQ_PSW 13 /* Push Switch IRQ */
#define IRQ_ZIGBEE 14 /* Ziggbee IO IRQ */
#endif /* CONFIG_SH_R7780MP */
#define __IO_PREFIX r7780rp
#include <asm/io_generic.h>
#endif /* __ASM_SH_RENESAS_R7780RP */
Reference in New Issue View Git Blame Copy Permalink