6e10f65427
Simplify and fix ds_touch_bit. If a device is attached in the middle of a bus search the status register will return more than the default 16 bytes. The additional bytes indicate that it has detected a new device. The way ds_wait_status is coded, if it doesn't read 16 status bytes it returns an error value. ds_touch_bit then will detect that error and return an error. In that case it doesn't read the input buffer and returns uninitialized data. It doesn't stop there. The next transaction will not expect the extra byte in the input buffer and the short read will cause an error and clear out both the old byte and new data in the input buffer. Just ignore the value of ds_wait_status. It is still required to wait until ds2490 is again idle and there is data to read when ds_recv_data is called. This also removes the while loop. None of the other commands wait and verify that the issued command is in the status register. Signed-off-by: David Fries <david@fries.net> Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
952 lines
20 KiB
C
952 lines
20 KiB
C
/*
|
|
* dscore.c
|
|
*
|
|
* Copyright (c) 2004 Evgeniy Polyakov <johnpol@2ka.mipt.ru>
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/usb.h>
|
|
|
|
#include "../w1_int.h"
|
|
#include "../w1.h"
|
|
|
|
/* COMMAND TYPE CODES */
|
|
#define CONTROL_CMD 0x00
|
|
#define COMM_CMD 0x01
|
|
#define MODE_CMD 0x02
|
|
|
|
/* CONTROL COMMAND CODES */
|
|
#define CTL_RESET_DEVICE 0x0000
|
|
#define CTL_START_EXE 0x0001
|
|
#define CTL_RESUME_EXE 0x0002
|
|
#define CTL_HALT_EXE_IDLE 0x0003
|
|
#define CTL_HALT_EXE_DONE 0x0004
|
|
#define CTL_FLUSH_COMM_CMDS 0x0007
|
|
#define CTL_FLUSH_RCV_BUFFER 0x0008
|
|
#define CTL_FLUSH_XMT_BUFFER 0x0009
|
|
#define CTL_GET_COMM_CMDS 0x000A
|
|
|
|
/* MODE COMMAND CODES */
|
|
#define MOD_PULSE_EN 0x0000
|
|
#define MOD_SPEED_CHANGE_EN 0x0001
|
|
#define MOD_1WIRE_SPEED 0x0002
|
|
#define MOD_STRONG_PU_DURATION 0x0003
|
|
#define MOD_PULLDOWN_SLEWRATE 0x0004
|
|
#define MOD_PROG_PULSE_DURATION 0x0005
|
|
#define MOD_WRITE1_LOWTIME 0x0006
|
|
#define MOD_DSOW0_TREC 0x0007
|
|
|
|
/* COMMUNICATION COMMAND CODES */
|
|
#define COMM_ERROR_ESCAPE 0x0601
|
|
#define COMM_SET_DURATION 0x0012
|
|
#define COMM_BIT_IO 0x0020
|
|
#define COMM_PULSE 0x0030
|
|
#define COMM_1_WIRE_RESET 0x0042
|
|
#define COMM_BYTE_IO 0x0052
|
|
#define COMM_MATCH_ACCESS 0x0064
|
|
#define COMM_BLOCK_IO 0x0074
|
|
#define COMM_READ_STRAIGHT 0x0080
|
|
#define COMM_DO_RELEASE 0x6092
|
|
#define COMM_SET_PATH 0x00A2
|
|
#define COMM_WRITE_SRAM_PAGE 0x00B2
|
|
#define COMM_WRITE_EPROM 0x00C4
|
|
#define COMM_READ_CRC_PROT_PAGE 0x00D4
|
|
#define COMM_READ_REDIRECT_PAGE_CRC 0x21E4
|
|
#define COMM_SEARCH_ACCESS 0x00F4
|
|
|
|
/* Communication command bits */
|
|
#define COMM_TYPE 0x0008
|
|
#define COMM_SE 0x0008
|
|
#define COMM_D 0x0008
|
|
#define COMM_Z 0x0008
|
|
#define COMM_CH 0x0008
|
|
#define COMM_SM 0x0008
|
|
#define COMM_R 0x0008
|
|
#define COMM_IM 0x0001
|
|
|
|
#define COMM_PS 0x4000
|
|
#define COMM_PST 0x4000
|
|
#define COMM_CIB 0x4000
|
|
#define COMM_RTS 0x4000
|
|
#define COMM_DT 0x2000
|
|
#define COMM_SPU 0x1000
|
|
#define COMM_F 0x0800
|
|
#define COMM_NTP 0x0400
|
|
#define COMM_ICP 0x0200
|
|
#define COMM_RST 0x0100
|
|
|
|
#define PULSE_PROG 0x01
|
|
#define PULSE_SPUE 0x02
|
|
|
|
#define BRANCH_MAIN 0xCC
|
|
#define BRANCH_AUX 0x33
|
|
|
|
/* Status flags */
|
|
#define ST_SPUA 0x01 /* Strong Pull-up is active */
|
|
#define ST_PRGA 0x02 /* 12V programming pulse is being generated */
|
|
#define ST_12VP 0x04 /* external 12V programming voltage is present */
|
|
#define ST_PMOD 0x08 /* DS2490 powered from USB and external sources */
|
|
#define ST_HALT 0x10 /* DS2490 is currently halted */
|
|
#define ST_IDLE 0x20 /* DS2490 is currently idle */
|
|
#define ST_EPOF 0x80
|
|
|
|
#define SPEED_NORMAL 0x00
|
|
#define SPEED_FLEXIBLE 0x01
|
|
#define SPEED_OVERDRIVE 0x02
|
|
|
|
#define NUM_EP 4
|
|
#define EP_CONTROL 0
|
|
#define EP_STATUS 1
|
|
#define EP_DATA_OUT 2
|
|
#define EP_DATA_IN 3
|
|
|
|
struct ds_device
|
|
{
|
|
struct list_head ds_entry;
|
|
|
|
struct usb_device *udev;
|
|
struct usb_interface *intf;
|
|
|
|
int ep[NUM_EP];
|
|
|
|
/* Strong PullUp
|
|
* 0: pullup not active, else duration in milliseconds
|
|
*/
|
|
int spu_sleep;
|
|
|
|
struct w1_bus_master master;
|
|
};
|
|
|
|
struct ds_status
|
|
{
|
|
u8 enable;
|
|
u8 speed;
|
|
u8 pullup_dur;
|
|
u8 ppuls_dur;
|
|
u8 pulldown_slew;
|
|
u8 write1_time;
|
|
u8 write0_time;
|
|
u8 reserved0;
|
|
u8 status;
|
|
u8 command0;
|
|
u8 command1;
|
|
u8 command_buffer_status;
|
|
u8 data_out_buffer_status;
|
|
u8 data_in_buffer_status;
|
|
u8 reserved1;
|
|
u8 reserved2;
|
|
|
|
};
|
|
|
|
static struct usb_device_id ds_id_table [] = {
|
|
{ USB_DEVICE(0x04fa, 0x2490) },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, ds_id_table);
|
|
|
|
static int ds_probe(struct usb_interface *, const struct usb_device_id *);
|
|
static void ds_disconnect(struct usb_interface *);
|
|
|
|
static inline void ds_dump_status(unsigned char *, unsigned char *, int);
|
|
static int ds_send_control(struct ds_device *, u16, u16);
|
|
static int ds_send_control_cmd(struct ds_device *, u16, u16);
|
|
|
|
static LIST_HEAD(ds_devices);
|
|
static DEFINE_MUTEX(ds_mutex);
|
|
|
|
static struct usb_driver ds_driver = {
|
|
.name = "DS9490R",
|
|
.probe = ds_probe,
|
|
.disconnect = ds_disconnect,
|
|
.id_table = ds_id_table,
|
|
};
|
|
|
|
static int ds_send_control_cmd(struct ds_device *dev, u16 value, u16 index)
|
|
{
|
|
int err;
|
|
|
|
err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]),
|
|
CONTROL_CMD, 0x40, value, index, NULL, 0, 1000);
|
|
if (err < 0) {
|
|
printk(KERN_ERR "Failed to send command control message %x.%x: err=%d.\n",
|
|
value, index, err);
|
|
return err;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int ds_send_control_mode(struct ds_device *dev, u16 value, u16 index)
|
|
{
|
|
int err;
|
|
|
|
err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]),
|
|
MODE_CMD, 0x40, value, index, NULL, 0, 1000);
|
|
if (err < 0) {
|
|
printk(KERN_ERR "Failed to send mode control message %x.%x: err=%d.\n",
|
|
value, index, err);
|
|
return err;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int ds_send_control(struct ds_device *dev, u16 value, u16 index)
|
|
{
|
|
int err;
|
|
|
|
err = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, dev->ep[EP_CONTROL]),
|
|
COMM_CMD, 0x40, value, index, NULL, 0, 1000);
|
|
if (err < 0) {
|
|
printk(KERN_ERR "Failed to send control message %x.%x: err=%d.\n",
|
|
value, index, err);
|
|
return err;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static inline void ds_dump_status(unsigned char *buf, unsigned char *str, int off)
|
|
{
|
|
printk("%45s: %8x\n", str, buf[off]);
|
|
}
|
|
|
|
static int ds_recv_status_nodump(struct ds_device *dev, struct ds_status *st,
|
|
unsigned char *buf, int size)
|
|
{
|
|
int count, err;
|
|
|
|
memset(st, 0, sizeof(*st));
|
|
|
|
count = 0;
|
|
err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_STATUS]), buf, size, &count, 100);
|
|
if (err < 0) {
|
|
printk(KERN_ERR "Failed to read 1-wire data from 0x%x: err=%d.\n", dev->ep[EP_STATUS], err);
|
|
return err;
|
|
}
|
|
|
|
if (count >= sizeof(*st))
|
|
memcpy(st, buf, sizeof(*st));
|
|
|
|
return count;
|
|
}
|
|
|
|
static int ds_recv_status(struct ds_device *dev, struct ds_status *st)
|
|
{
|
|
unsigned char buf[64];
|
|
int count, err = 0, i;
|
|
|
|
memcpy(st, buf, sizeof(*st));
|
|
|
|
count = ds_recv_status_nodump(dev, st, buf, sizeof(buf));
|
|
if (count < 0)
|
|
return err;
|
|
|
|
printk("0x%x: count=%d, status: ", dev->ep[EP_STATUS], count);
|
|
for (i=0; i<count; ++i)
|
|
printk("%02x ", buf[i]);
|
|
printk("\n");
|
|
|
|
if (count >= 16) {
|
|
ds_dump_status(buf, "enable flag", 0);
|
|
ds_dump_status(buf, "1-wire speed", 1);
|
|
ds_dump_status(buf, "strong pullup duration", 2);
|
|
ds_dump_status(buf, "programming pulse duration", 3);
|
|
ds_dump_status(buf, "pulldown slew rate control", 4);
|
|
ds_dump_status(buf, "write-1 low time", 5);
|
|
ds_dump_status(buf, "data sample offset/write-0 recovery time", 6);
|
|
ds_dump_status(buf, "reserved (test register)", 7);
|
|
ds_dump_status(buf, "device status flags", 8);
|
|
ds_dump_status(buf, "communication command byte 1", 9);
|
|
ds_dump_status(buf, "communication command byte 2", 10);
|
|
ds_dump_status(buf, "communication command buffer status", 11);
|
|
ds_dump_status(buf, "1-wire data output buffer status", 12);
|
|
ds_dump_status(buf, "1-wire data input buffer status", 13);
|
|
ds_dump_status(buf, "reserved", 14);
|
|
ds_dump_status(buf, "reserved", 15);
|
|
}
|
|
|
|
memcpy(st, buf, sizeof(*st));
|
|
|
|
if (st->status & ST_EPOF) {
|
|
printk(KERN_INFO "Resetting device after ST_EPOF.\n");
|
|
err = ds_send_control_cmd(dev, CTL_RESET_DEVICE, 0);
|
|
if (err)
|
|
return err;
|
|
count = ds_recv_status_nodump(dev, st, buf, sizeof(buf));
|
|
if (count < 0)
|
|
return err;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int ds_recv_data(struct ds_device *dev, unsigned char *buf, int size)
|
|
{
|
|
int count, err;
|
|
struct ds_status st;
|
|
|
|
count = 0;
|
|
err = usb_bulk_msg(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN]),
|
|
buf, size, &count, 1000);
|
|
if (err < 0) {
|
|
printk(KERN_INFO "Clearing ep0x%x.\n", dev->ep[EP_DATA_IN]);
|
|
usb_clear_halt(dev->udev, usb_rcvbulkpipe(dev->udev, dev->ep[EP_DATA_IN]));
|
|
ds_recv_status(dev, &st);
|
|
return err;
|
|
}
|
|
|
|
#if 0
|
|
{
|
|
int i;
|
|
|
|
printk("%s: count=%d: ", __func__, count);
|
|
for (i=0; i<count; ++i)
|
|
printk("%02x ", buf[i]);
|
|
printk("\n");
|
|
}
|
|
#endif
|
|
return count;
|
|
}
|
|
|
|
static int ds_send_data(struct ds_device *dev, unsigned char *buf, int len)
|
|
{
|
|
int count, err;
|
|
|
|
count = 0;
|
|
err = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, dev->ep[EP_DATA_OUT]), buf, len, &count, 1000);
|
|
if (err < 0) {
|
|
printk(KERN_ERR "Failed to write 1-wire data to ep0x%x: "
|
|
"err=%d.\n", dev->ep[EP_DATA_OUT], err);
|
|
return err;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
#if 0
|
|
|
|
int ds_stop_pulse(struct ds_device *dev, int limit)
|
|
{
|
|
struct ds_status st;
|
|
int count = 0, err = 0;
|
|
u8 buf[0x20];
|
|
|
|
do {
|
|
err = ds_send_control(dev, CTL_HALT_EXE_IDLE, 0);
|
|
if (err)
|
|
break;
|
|
err = ds_send_control(dev, CTL_RESUME_EXE, 0);
|
|
if (err)
|
|
break;
|
|
err = ds_recv_status_nodump(dev, &st, buf, sizeof(buf));
|
|
if (err)
|
|
break;
|
|
|
|
if ((st.status & ST_SPUA) == 0) {
|
|
err = ds_send_control_mode(dev, MOD_PULSE_EN, 0);
|
|
if (err)
|
|
break;
|
|
}
|
|
} while(++count < limit);
|
|
|
|
return err;
|
|
}
|
|
|
|
int ds_detect(struct ds_device *dev, struct ds_status *st)
|
|
{
|
|
int err;
|
|
|
|
err = ds_send_control_cmd(dev, CTL_RESET_DEVICE, 0);
|
|
if (err)
|
|
return err;
|
|
|
|
err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM, 0);
|
|
if (err)
|
|
return err;
|
|
|
|
err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM | COMM_TYPE, 0x40);
|
|
if (err)
|
|
return err;
|
|
|
|
err = ds_send_control_mode(dev, MOD_PULSE_EN, PULSE_PROG);
|
|
if (err)
|
|
return err;
|
|
|
|
err = ds_recv_status(dev, st);
|
|
|
|
return err;
|
|
}
|
|
|
|
#endif /* 0 */
|
|
|
|
static int ds_wait_status(struct ds_device *dev, struct ds_status *st)
|
|
{
|
|
u8 buf[0x20];
|
|
int err, count = 0;
|
|
|
|
do {
|
|
err = ds_recv_status_nodump(dev, st, buf, sizeof(buf));
|
|
#if 0
|
|
if (err >= 0) {
|
|
int i;
|
|
printk("0x%x: count=%d, status: ", dev->ep[EP_STATUS], err);
|
|
for (i=0; i<err; ++i)
|
|
printk("%02x ", buf[i]);
|
|
printk("\n");
|
|
}
|
|
#endif
|
|
} while(!(buf[0x08] & 0x20) && !(err < 0) && ++count < 100);
|
|
|
|
|
|
if (((err > 16) && (buf[0x10] & 0x01)) || count >= 100 || err < 0) {
|
|
ds_recv_status(dev, st);
|
|
return -1;
|
|
} else
|
|
return 0;
|
|
}
|
|
|
|
static int ds_reset(struct ds_device *dev, struct ds_status *st)
|
|
{
|
|
int err;
|
|
|
|
//err = ds_send_control(dev, COMM_1_WIRE_RESET | COMM_F | COMM_IM | COMM_SE, SPEED_FLEXIBLE);
|
|
err = ds_send_control(dev, 0x43, SPEED_NORMAL);
|
|
if (err)
|
|
return err;
|
|
|
|
ds_wait_status(dev, st);
|
|
#if 0
|
|
if (st->command_buffer_status) {
|
|
printk(KERN_INFO "Short circuit.\n");
|
|
return -EIO;
|
|
}
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if 0
|
|
static int ds_set_speed(struct ds_device *dev, int speed)
|
|
{
|
|
int err;
|
|
|
|
if (speed != SPEED_NORMAL && speed != SPEED_FLEXIBLE && speed != SPEED_OVERDRIVE)
|
|
return -EINVAL;
|
|
|
|
if (speed != SPEED_OVERDRIVE)
|
|
speed = SPEED_FLEXIBLE;
|
|
|
|
speed &= 0xff;
|
|
|
|
err = ds_send_control_mode(dev, MOD_1WIRE_SPEED, speed);
|
|
if (err)
|
|
return err;
|
|
|
|
return err;
|
|
}
|
|
#endif /* 0 */
|
|
|
|
static int ds_set_pullup(struct ds_device *dev, int delay)
|
|
{
|
|
int err;
|
|
u8 del = 1 + (u8)(delay >> 4);
|
|
|
|
dev->spu_sleep = 0;
|
|
err = ds_send_control_mode(dev, MOD_PULSE_EN, delay ? PULSE_SPUE : 0);
|
|
if (err)
|
|
return err;
|
|
|
|
if (delay) {
|
|
err = ds_send_control(dev, COMM_SET_DURATION | COMM_IM, del);
|
|
if (err)
|
|
return err;
|
|
|
|
/* Just storing delay would not get the trunication and
|
|
* roundup.
|
|
*/
|
|
dev->spu_sleep = del<<4;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int ds_touch_bit(struct ds_device *dev, u8 bit, u8 *tbit)
|
|
{
|
|
int err;
|
|
struct ds_status st;
|
|
|
|
err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | (bit ? COMM_D : 0),
|
|
0);
|
|
if (err)
|
|
return err;
|
|
|
|
ds_wait_status(dev, &st);
|
|
|
|
err = ds_recv_data(dev, tbit, sizeof(*tbit));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if 0
|
|
static int ds_write_bit(struct ds_device *dev, u8 bit)
|
|
{
|
|
int err;
|
|
struct ds_status st;
|
|
|
|
/* Set COMM_ICP to write without a readback. Note, this will
|
|
* produce one time slot, a down followed by an up with COMM_D
|
|
* only determing the timing.
|
|
*/
|
|
err = ds_send_control(dev, COMM_BIT_IO | COMM_IM | COMM_ICP |
|
|
(bit ? COMM_D : 0), 0);
|
|
if (err)
|
|
return err;
|
|
|
|
ds_wait_status(dev, &st);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int ds_write_byte(struct ds_device *dev, u8 byte)
|
|
{
|
|
int err;
|
|
struct ds_status st;
|
|
u8 rbyte;
|
|
|
|
err = ds_send_control(dev, COMM_BYTE_IO | COMM_IM | COMM_SPU, byte);
|
|
if (err)
|
|
return err;
|
|
|
|
if (dev->spu_sleep)
|
|
msleep(dev->spu_sleep);
|
|
|
|
err = ds_wait_status(dev, &st);
|
|
if (err)
|
|
return err;
|
|
|
|
err = ds_recv_data(dev, &rbyte, sizeof(rbyte));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return !(byte == rbyte);
|
|
}
|
|
|
|
static int ds_read_byte(struct ds_device *dev, u8 *byte)
|
|
{
|
|
int err;
|
|
struct ds_status st;
|
|
|
|
err = ds_send_control(dev, COMM_BYTE_IO | COMM_IM , 0xff);
|
|
if (err)
|
|
return err;
|
|
|
|
ds_wait_status(dev, &st);
|
|
|
|
err = ds_recv_data(dev, byte, sizeof(*byte));
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ds_read_block(struct ds_device *dev, u8 *buf, int len)
|
|
{
|
|
struct ds_status st;
|
|
int err;
|
|
|
|
if (len > 64*1024)
|
|
return -E2BIG;
|
|
|
|
memset(buf, 0xFF, len);
|
|
|
|
err = ds_send_data(dev, buf, len);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = ds_send_control(dev, COMM_BLOCK_IO | COMM_IM, len);
|
|
if (err)
|
|
return err;
|
|
|
|
ds_wait_status(dev, &st);
|
|
|
|
memset(buf, 0x00, len);
|
|
err = ds_recv_data(dev, buf, len);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int ds_write_block(struct ds_device *dev, u8 *buf, int len)
|
|
{
|
|
int err;
|
|
struct ds_status st;
|
|
|
|
err = ds_send_data(dev, buf, len);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
ds_wait_status(dev, &st);
|
|
|
|
err = ds_send_control(dev, COMM_BLOCK_IO | COMM_IM | COMM_SPU, len);
|
|
if (err)
|
|
return err;
|
|
|
|
if (dev->spu_sleep)
|
|
msleep(dev->spu_sleep);
|
|
|
|
ds_wait_status(dev, &st);
|
|
|
|
err = ds_recv_data(dev, buf, len);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return !(err == len);
|
|
}
|
|
|
|
#if 0
|
|
|
|
static int ds_search(struct ds_device *dev, u64 init, u64 *buf, u8 id_number, int conditional_search)
|
|
{
|
|
int err;
|
|
u16 value, index;
|
|
struct ds_status st;
|
|
|
|
memset(buf, 0, sizeof(buf));
|
|
|
|
err = ds_send_data(ds_dev, (unsigned char *)&init, 8);
|
|
if (err)
|
|
return err;
|
|
|
|
ds_wait_status(ds_dev, &st);
|
|
|
|
value = COMM_SEARCH_ACCESS | COMM_IM | COMM_SM | COMM_F | COMM_RTS;
|
|
index = (conditional_search ? 0xEC : 0xF0) | (id_number << 8);
|
|
err = ds_send_control(ds_dev, value, index);
|
|
if (err)
|
|
return err;
|
|
|
|
ds_wait_status(ds_dev, &st);
|
|
|
|
err = ds_recv_data(ds_dev, (unsigned char *)buf, 8*id_number);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return err/8;
|
|
}
|
|
|
|
static int ds_match_access(struct ds_device *dev, u64 init)
|
|
{
|
|
int err;
|
|
struct ds_status st;
|
|
|
|
err = ds_send_data(dev, (unsigned char *)&init, sizeof(init));
|
|
if (err)
|
|
return err;
|
|
|
|
ds_wait_status(dev, &st);
|
|
|
|
err = ds_send_control(dev, COMM_MATCH_ACCESS | COMM_IM | COMM_RST, 0x0055);
|
|
if (err)
|
|
return err;
|
|
|
|
ds_wait_status(dev, &st);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ds_set_path(struct ds_device *dev, u64 init)
|
|
{
|
|
int err;
|
|
struct ds_status st;
|
|
u8 buf[9];
|
|
|
|
memcpy(buf, &init, 8);
|
|
buf[8] = BRANCH_MAIN;
|
|
|
|
err = ds_send_data(dev, buf, sizeof(buf));
|
|
if (err)
|
|
return err;
|
|
|
|
ds_wait_status(dev, &st);
|
|
|
|
err = ds_send_control(dev, COMM_SET_PATH | COMM_IM | COMM_RST, 0);
|
|
if (err)
|
|
return err;
|
|
|
|
ds_wait_status(dev, &st);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif /* 0 */
|
|
|
|
static u8 ds9490r_touch_bit(void *data, u8 bit)
|
|
{
|
|
u8 ret;
|
|
struct ds_device *dev = data;
|
|
|
|
if (ds_touch_bit(dev, bit, &ret))
|
|
return 0;
|
|
|
|
return ret;
|
|
}
|
|
|
|
#if 0
|
|
static void ds9490r_write_bit(void *data, u8 bit)
|
|
{
|
|
struct ds_device *dev = data;
|
|
|
|
ds_write_bit(dev, bit);
|
|
}
|
|
|
|
static u8 ds9490r_read_bit(void *data)
|
|
{
|
|
struct ds_device *dev = data;
|
|
int err;
|
|
u8 bit = 0;
|
|
|
|
err = ds_touch_bit(dev, 1, &bit);
|
|
if (err)
|
|
return 0;
|
|
|
|
return bit & 1;
|
|
}
|
|
#endif
|
|
|
|
static void ds9490r_write_byte(void *data, u8 byte)
|
|
{
|
|
struct ds_device *dev = data;
|
|
|
|
ds_write_byte(dev, byte);
|
|
}
|
|
|
|
static u8 ds9490r_read_byte(void *data)
|
|
{
|
|
struct ds_device *dev = data;
|
|
int err;
|
|
u8 byte = 0;
|
|
|
|
err = ds_read_byte(dev, &byte);
|
|
if (err)
|
|
return 0;
|
|
|
|
return byte;
|
|
}
|
|
|
|
static void ds9490r_write_block(void *data, const u8 *buf, int len)
|
|
{
|
|
struct ds_device *dev = data;
|
|
|
|
ds_write_block(dev, (u8 *)buf, len);
|
|
}
|
|
|
|
static u8 ds9490r_read_block(void *data, u8 *buf, int len)
|
|
{
|
|
struct ds_device *dev = data;
|
|
int err;
|
|
|
|
err = ds_read_block(dev, buf, len);
|
|
if (err < 0)
|
|
return 0;
|
|
|
|
return len;
|
|
}
|
|
|
|
static u8 ds9490r_reset(void *data)
|
|
{
|
|
struct ds_device *dev = data;
|
|
struct ds_status st;
|
|
int err;
|
|
|
|
memset(&st, 0, sizeof(st));
|
|
|
|
err = ds_reset(dev, &st);
|
|
if (err)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u8 ds9490r_set_pullup(void *data, int delay)
|
|
{
|
|
struct ds_device *dev = data;
|
|
|
|
if (ds_set_pullup(dev, delay))
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ds_w1_init(struct ds_device *dev)
|
|
{
|
|
memset(&dev->master, 0, sizeof(struct w1_bus_master));
|
|
|
|
dev->master.data = dev;
|
|
dev->master.touch_bit = &ds9490r_touch_bit;
|
|
/* read_bit and write_bit in w1_bus_master are expected to set and
|
|
* sample the line level. For write_bit that means it is expected to
|
|
* set it to that value and leave it there. ds2490 only supports an
|
|
* individual time slot at the lowest level. The requirement from
|
|
* pulling the bus state down to reading the state is 15us, something
|
|
* that isn't realistic on the USB bus anyway.
|
|
dev->master.read_bit = &ds9490r_read_bit;
|
|
dev->master.write_bit = &ds9490r_write_bit;
|
|
*/
|
|
dev->master.read_byte = &ds9490r_read_byte;
|
|
dev->master.write_byte = &ds9490r_write_byte;
|
|
dev->master.read_block = &ds9490r_read_block;
|
|
dev->master.write_block = &ds9490r_write_block;
|
|
dev->master.reset_bus = &ds9490r_reset;
|
|
dev->master.set_pullup = &ds9490r_set_pullup;
|
|
|
|
return w1_add_master_device(&dev->master);
|
|
}
|
|
|
|
static void ds_w1_fini(struct ds_device *dev)
|
|
{
|
|
w1_remove_master_device(&dev->master);
|
|
}
|
|
|
|
static int ds_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *udev_id)
|
|
{
|
|
struct usb_device *udev = interface_to_usbdev(intf);
|
|
struct usb_endpoint_descriptor *endpoint;
|
|
struct usb_host_interface *iface_desc;
|
|
struct ds_device *dev;
|
|
int i, err;
|
|
|
|
dev = kmalloc(sizeof(struct ds_device), GFP_KERNEL);
|
|
if (!dev) {
|
|
printk(KERN_INFO "Failed to allocate new DS9490R structure.\n");
|
|
return -ENOMEM;
|
|
}
|
|
dev->spu_sleep = 0;
|
|
dev->udev = usb_get_dev(udev);
|
|
if (!dev->udev) {
|
|
err = -ENOMEM;
|
|
goto err_out_free;
|
|
}
|
|
memset(dev->ep, 0, sizeof(dev->ep));
|
|
|
|
usb_set_intfdata(intf, dev);
|
|
|
|
err = usb_set_interface(dev->udev, intf->altsetting[0].desc.bInterfaceNumber, 3);
|
|
if (err) {
|
|
printk(KERN_ERR "Failed to set alternative setting 3 for %d interface: err=%d.\n",
|
|
intf->altsetting[0].desc.bInterfaceNumber, err);
|
|
goto err_out_clear;
|
|
}
|
|
|
|
err = usb_reset_configuration(dev->udev);
|
|
if (err) {
|
|
printk(KERN_ERR "Failed to reset configuration: err=%d.\n", err);
|
|
goto err_out_clear;
|
|
}
|
|
|
|
iface_desc = &intf->altsetting[0];
|
|
if (iface_desc->desc.bNumEndpoints != NUM_EP-1) {
|
|
printk(KERN_INFO "Num endpoints=%d. It is not DS9490R.\n", iface_desc->desc.bNumEndpoints);
|
|
err = -EINVAL;
|
|
goto err_out_clear;
|
|
}
|
|
|
|
/*
|
|
* This loop doesn'd show control 0 endpoint,
|
|
* so we will fill only 1-3 endpoints entry.
|
|
*/
|
|
for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
|
|
endpoint = &iface_desc->endpoint[i].desc;
|
|
|
|
dev->ep[i+1] = endpoint->bEndpointAddress;
|
|
#if 0
|
|
printk("%d: addr=%x, size=%d, dir=%s, type=%x\n",
|
|
i, endpoint->bEndpointAddress, le16_to_cpu(endpoint->wMaxPacketSize),
|
|
(endpoint->bEndpointAddress & USB_DIR_IN)?"IN":"OUT",
|
|
endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK);
|
|
#endif
|
|
}
|
|
|
|
err = ds_w1_init(dev);
|
|
if (err)
|
|
goto err_out_clear;
|
|
|
|
mutex_lock(&ds_mutex);
|
|
list_add_tail(&dev->ds_entry, &ds_devices);
|
|
mutex_unlock(&ds_mutex);
|
|
|
|
return 0;
|
|
|
|
err_out_clear:
|
|
usb_set_intfdata(intf, NULL);
|
|
usb_put_dev(dev->udev);
|
|
err_out_free:
|
|
kfree(dev);
|
|
return err;
|
|
}
|
|
|
|
static void ds_disconnect(struct usb_interface *intf)
|
|
{
|
|
struct ds_device *dev;
|
|
|
|
dev = usb_get_intfdata(intf);
|
|
if (!dev)
|
|
return;
|
|
|
|
mutex_lock(&ds_mutex);
|
|
list_del(&dev->ds_entry);
|
|
mutex_unlock(&ds_mutex);
|
|
|
|
ds_w1_fini(dev);
|
|
|
|
usb_set_intfdata(intf, NULL);
|
|
|
|
usb_put_dev(dev->udev);
|
|
kfree(dev);
|
|
}
|
|
|
|
static int ds_init(void)
|
|
{
|
|
int err;
|
|
|
|
err = usb_register(&ds_driver);
|
|
if (err) {
|
|
printk(KERN_INFO "Failed to register DS9490R USB device: err=%d.\n", err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ds_fini(void)
|
|
{
|
|
usb_deregister(&ds_driver);
|
|
}
|
|
|
|
module_init(ds_init);
|
|
module_exit(ds_fini);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Evgeniy Polyakov <johnpol@2ka.mipt.ru>");
|
|
MODULE_DESCRIPTION("DS2490 USB <-> W1 bus master driver (DS9490*)");
|