luck/tmp_suning_uos_patched
1
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity
6e883b0e42
tmp_suning_uos_patched/drivers/scsi/libsas/sas_host_smp.c
Tejun Heo 5f49f63178 block: set rq->resid_len to blk_rq_bytes() on issue 
In commit c3a4d78c58, while introducing
rq->resid_len, the default value of residue count was changed from
full count to zero.  The conversion was done under the assumption that
when a request fails residue count wasn't defined.  However, Boaz and
James pointed out that this wasn't true and the residue count should
be preserved for failed requests too.

This patchset restores the original behavior by setting rq->resid_len
to blk_rq_bytes(rq) on request start and restoring explicit clearing
in affected drivers.  While at it, take advantage of the fact that
rq->resid_len is set to full count where applicable.

* ide-cd: rq->resid_len cleared on pc success

* mptsas: req->resid_len cleared on success

* sas_expander: rsp/req->resid_len cleared on success

* mpt2sas_transport: req->resid_len cleared on success

* ide-cd, ide-tape, mptsas, sas_host_smp, mpt2sas_transport, ub: take
  advantage of initial full count to simplify code

Boaz Harrosh spotted bug in resid_len initialization.  Fixed as
suggested.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Borislav Petkov <petkovbb@googlemail.com>
Cc: Boaz Harrosh <bharrosh@panasas.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Eric Moore <Eric.Moore@lsi.com>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-19 11:36:08 +02:00

274 lines
6.8 KiB
C
Raw Blame History

/*
* Serial Attached SCSI (SAS) Expander discovery and configuration
*
* Copyright (C) 2007 James E.J. Bottomley
* <James.Bottomley@HansenPartnership.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 only.
*/
#include <linux/scatterlist.h>
#include <linux/blkdev.h>
#include "sas_internal.h"
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_sas.h>
#include "../scsi_sas_internal.h"
static void sas_host_smp_discover(struct sas_ha_struct *sas_ha, u8 *resp_data,
u8 phy_id)
{
struct sas_phy *phy;
struct sas_rphy *rphy;
if (phy_id >= sas_ha->num_phys) {
resp_data[2] = SMP_RESP_NO_PHY;
return;
}
resp_data[2] = SMP_RESP_FUNC_ACC;
phy = sas_ha->sas_phy[phy_id]->phy;
resp_data[9] = phy_id;
resp_data[13] = phy->negotiated_linkrate;
memcpy(resp_data + 16, sas_ha->sas_addr, SAS_ADDR_SIZE);
memcpy(resp_data + 24, sas_ha->sas_phy[phy_id]->attached_sas_addr,
SAS_ADDR_SIZE);
resp_data[40] = (phy->minimum_linkrate << 4) |
phy->minimum_linkrate_hw;
resp_data[41] = (phy->maximum_linkrate << 4) |
phy->maximum_linkrate_hw;
if (!sas_ha->sas_phy[phy_id]->port ||
!sas_ha->sas_phy[phy_id]->port->port_dev)
return;
rphy = sas_ha->sas_phy[phy_id]->port->port_dev->rphy;
resp_data[12] = rphy->identify.device_type << 4;
resp_data[14] = rphy->identify.initiator_port_protocols;
resp_data[15] = rphy->identify.target_port_protocols;
}
static void sas_report_phy_sata(struct sas_ha_struct *sas_ha, u8 *resp_data,
u8 phy_id)
{
struct sas_rphy *rphy;
struct dev_to_host_fis *fis;
int i;
if (phy_id >= sas_ha->num_phys) {
resp_data[2] = SMP_RESP_NO_PHY;
return;
}
resp_data[2] = SMP_RESP_PHY_NO_SATA;
if (!sas_ha->sas_phy[phy_id]->port)
return;
rphy = sas_ha->sas_phy[phy_id]->port->port_dev->rphy;
fis = (struct dev_to_host_fis *)
sas_ha->sas_phy[phy_id]->port->port_dev->frame_rcvd;
if (rphy->identify.target_port_protocols != SAS_PROTOCOL_SATA)
return;
resp_data[2] = SMP_RESP_FUNC_ACC;
resp_data[9] = phy_id;
memcpy(resp_data + 16, sas_ha->sas_phy[phy_id]->attached_sas_addr,
SAS_ADDR_SIZE);
/* check to see if we have a valid d2h fis */
if (fis->fis_type != 0x34)
return;
/* the d2h fis is required by the standard to be in LE format */
for (i = 0; i < 20; i += 4) {
u8 *dst = resp_data + 24 + i, *src =
&sas_ha->sas_phy[phy_id]->port->port_dev->frame_rcvd[i];
dst[0] = src[3];
dst[1] = src[2];
dst[2] = src[1];
dst[3] = src[0];
}
}
static void sas_phy_control(struct sas_ha_struct *sas_ha, u8 phy_id,
u8 phy_op, enum sas_linkrate min,
enum sas_linkrate max, u8 *resp_data)
{
struct sas_internal *i =
to_sas_internal(sas_ha->core.shost->transportt);
struct sas_phy_linkrates rates;
if (phy_id >= sas_ha->num_phys) {
resp_data[2] = SMP_RESP_NO_PHY;
return;
}
switch (phy_op) {
case PHY_FUNC_NOP:
case PHY_FUNC_LINK_RESET:
case PHY_FUNC_HARD_RESET:
case PHY_FUNC_DISABLE:
case PHY_FUNC_CLEAR_ERROR_LOG:
case PHY_FUNC_CLEAR_AFFIL:
case PHY_FUNC_TX_SATA_PS_SIGNAL:
break;
default:
resp_data[2] = SMP_RESP_PHY_UNK_OP;
return;
}
rates.minimum_linkrate = min;
rates.maximum_linkrate = max;
if (i->dft->lldd_control_phy(sas_ha->sas_phy[phy_id], phy_op, &rates))
resp_data[2] = SMP_RESP_FUNC_FAILED;
else
resp_data[2] = SMP_RESP_FUNC_ACC;
}
int sas_smp_host_handler(struct Scsi_Host *shost, struct request *req,
struct request *rsp)
{
u8 *req_data = NULL, *resp_data = NULL, *buf;
struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
int error = -EINVAL;
/* eight is the minimum size for request and response frames */
if (blk_rq_bytes(req) < 8 || blk_rq_bytes(rsp) < 8)
goto out;
if (bio_offset(req->bio) + blk_rq_bytes(req) > PAGE_SIZE ||
bio_offset(rsp->bio) + blk_rq_bytes(rsp) > PAGE_SIZE) {
shost_printk(KERN_ERR, shost,
"SMP request/response frame crosses page boundary");
goto out;
}
req_data = kzalloc(blk_rq_bytes(req), GFP_KERNEL);
/* make sure frame can always be built ... we copy
* back only the requested length */
resp_data = kzalloc(max(blk_rq_bytes(rsp), 128U), GFP_KERNEL);
if (!req_data || !resp_data) {
error = -ENOMEM;
goto out;
}
local_irq_disable();
buf = kmap_atomic(bio_page(req->bio), KM_USER0) + bio_offset(req->bio);
memcpy(req_data, buf, blk_rq_bytes(req));
kunmap_atomic(buf - bio_offset(req->bio), KM_USER0);
local_irq_enable();
if (req_data[0] != SMP_REQUEST)
goto out;
/* always succeeds ... even if we can't process the request
* the result is in the response frame */
error = 0;
/* set up default don't know response */
resp_data[0] = SMP_RESPONSE;
resp_data[1] = req_data[1];
resp_data[2] = SMP_RESP_FUNC_UNK;
switch (req_data[1]) {
case SMP_REPORT_GENERAL:
req->resid_len -= 8;
rsp->resid_len -= 32;
resp_data[2] = SMP_RESP_FUNC_ACC;
resp_data[9] = sas_ha->num_phys;
break;
case SMP_REPORT_MANUF_INFO:
req->resid_len -= 8;
rsp->resid_len -= 64;
resp_data[2] = SMP_RESP_FUNC_ACC;
memcpy(resp_data + 12, shost->hostt->name,
SAS_EXPANDER_VENDOR_ID_LEN);
memcpy(resp_data + 20, "libsas virt phy",
SAS_EXPANDER_PRODUCT_ID_LEN);
break;
case SMP_READ_GPIO_REG:
/* FIXME: need GPIO support in the transport class */
break;
case SMP_DISCOVER:
req->resid_len -= 16;
if ((int)req->resid_len < 0) {
req->resid_len = 0;
error = -EINVAL;
goto out;
}
rsp->resid_len -= 56;
sas_host_smp_discover(sas_ha, resp_data, req_data[9]);
break;
case SMP_REPORT_PHY_ERR_LOG:
/* FIXME: could implement this with additional
* libsas callbacks providing the HW supports it */
break;
case SMP_REPORT_PHY_SATA:
req->resid_len -= 16;
if ((int)req->resid_len < 0) {
req->resid_len = 0;
error = -EINVAL;
goto out;
}
rsp->resid_len -= 60;
sas_report_phy_sata(sas_ha, resp_data, req_data[9]);
break;
case SMP_REPORT_ROUTE_INFO:
/* Can't implement; hosts have no routes */
break;
case SMP_WRITE_GPIO_REG:
/* FIXME: need GPIO support in the transport class */
break;
case SMP_CONF_ROUTE_INFO:
/* Can't implement; hosts have no routes */
break;
case SMP_PHY_CONTROL:
req->resid_len -= 44;
if ((int)req->resid_len < 0) {
req->resid_len = 0;
error = -EINVAL;
goto out;
}
rsp->resid_len -= 8;
sas_phy_control(sas_ha, req_data[9], req_data[10],
req_data[32] >> 4, req_data[33] >> 4,
resp_data);
break;
case SMP_PHY_TEST_FUNCTION:
/* FIXME: should this be implemented? */
break;
default:
/* probably a 2.0 function */
break;
}
local_irq_disable();
buf = kmap_atomic(bio_page(rsp->bio), KM_USER0) + bio_offset(rsp->bio);
memcpy(buf, resp_data, blk_rq_bytes(rsp));
flush_kernel_dcache_page(bio_page(rsp->bio));
kunmap_atomic(buf - bio_offset(rsp->bio), KM_USER0);
local_irq_enable();
out:
kfree(req_data);
kfree(resp_data);
return error;
}
Reference in New Issue View Git Blame Copy Permalink