4b70c62b9e
According to the ASPEED datasheet, gigabit speeds require a clock of 100MHz or higher. Other speeds require 25MHz or higher. This patch configures a 100MHz clock if the system has a direct-attached PHY, or 25MHz if the system is running NC-SI which is limited to 100MHz. There appear to be no other upstream users of the FTGMAC100 driver it is hard to know the clocking requirements of other platforms. Therefore a conservative approach was taken with enabling clocks. If the platform is not ASPEED, both requesting the clock and configuring the speed is skipped. Signed-off-by: Joel Stanley <joel@jms.id.au> Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
1946 lines
50 KiB
C
1946 lines
50 KiB
C
/*
|
|
* Faraday FTGMAC100 Gigabit Ethernet
|
|
*
|
|
* (C) Copyright 2009-2011 Faraday Technology
|
|
* Po-Yu Chuang <ratbert@faraday-tech.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/of.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/property.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/of_net.h>
|
|
#include <net/ip.h>
|
|
#include <net/ncsi.h>
|
|
|
|
#include "ftgmac100.h"
|
|
|
|
#define DRV_NAME "ftgmac100"
|
|
#define DRV_VERSION "0.7"
|
|
|
|
/* Arbitrary values, I am not sure the HW has limits */
|
|
#define MAX_RX_QUEUE_ENTRIES 1024
|
|
#define MAX_TX_QUEUE_ENTRIES 1024
|
|
#define MIN_RX_QUEUE_ENTRIES 32
|
|
#define MIN_TX_QUEUE_ENTRIES 32
|
|
|
|
/* Defaults */
|
|
#define DEF_RX_QUEUE_ENTRIES 128
|
|
#define DEF_TX_QUEUE_ENTRIES 128
|
|
|
|
#define MAX_PKT_SIZE 1536
|
|
#define RX_BUF_SIZE MAX_PKT_SIZE /* must be smaller than 0x3fff */
|
|
|
|
/* Min number of tx ring entries before stopping queue */
|
|
#define TX_THRESHOLD (MAX_SKB_FRAGS + 1)
|
|
|
|
#define FTGMAC_100MHZ 100000000
|
|
#define FTGMAC_25MHZ 25000000
|
|
|
|
struct ftgmac100 {
|
|
/* Registers */
|
|
struct resource *res;
|
|
void __iomem *base;
|
|
|
|
/* Rx ring */
|
|
unsigned int rx_q_entries;
|
|
struct ftgmac100_rxdes *rxdes;
|
|
dma_addr_t rxdes_dma;
|
|
struct sk_buff **rx_skbs;
|
|
unsigned int rx_pointer;
|
|
u32 rxdes0_edorr_mask;
|
|
|
|
/* Tx ring */
|
|
unsigned int tx_q_entries;
|
|
struct ftgmac100_txdes *txdes;
|
|
dma_addr_t txdes_dma;
|
|
struct sk_buff **tx_skbs;
|
|
unsigned int tx_clean_pointer;
|
|
unsigned int tx_pointer;
|
|
u32 txdes0_edotr_mask;
|
|
|
|
/* Used to signal the reset task of ring change request */
|
|
unsigned int new_rx_q_entries;
|
|
unsigned int new_tx_q_entries;
|
|
|
|
/* Scratch page to use when rx skb alloc fails */
|
|
void *rx_scratch;
|
|
dma_addr_t rx_scratch_dma;
|
|
|
|
/* Component structures */
|
|
struct net_device *netdev;
|
|
struct device *dev;
|
|
struct ncsi_dev *ndev;
|
|
struct napi_struct napi;
|
|
struct work_struct reset_task;
|
|
struct mii_bus *mii_bus;
|
|
struct clk *clk;
|
|
|
|
/* Link management */
|
|
int cur_speed;
|
|
int cur_duplex;
|
|
bool use_ncsi;
|
|
|
|
/* Multicast filter settings */
|
|
u32 maht0;
|
|
u32 maht1;
|
|
|
|
/* Flow control settings */
|
|
bool tx_pause;
|
|
bool rx_pause;
|
|
bool aneg_pause;
|
|
|
|
/* Misc */
|
|
bool need_mac_restart;
|
|
bool is_aspeed;
|
|
};
|
|
|
|
static int ftgmac100_reset_mac(struct ftgmac100 *priv, u32 maccr)
|
|
{
|
|
struct net_device *netdev = priv->netdev;
|
|
int i;
|
|
|
|
/* NOTE: reset clears all registers */
|
|
iowrite32(maccr, priv->base + FTGMAC100_OFFSET_MACCR);
|
|
iowrite32(maccr | FTGMAC100_MACCR_SW_RST,
|
|
priv->base + FTGMAC100_OFFSET_MACCR);
|
|
for (i = 0; i < 200; i++) {
|
|
unsigned int maccr;
|
|
|
|
maccr = ioread32(priv->base + FTGMAC100_OFFSET_MACCR);
|
|
if (!(maccr & FTGMAC100_MACCR_SW_RST))
|
|
return 0;
|
|
|
|
udelay(1);
|
|
}
|
|
|
|
netdev_err(netdev, "Hardware reset failed\n");
|
|
return -EIO;
|
|
}
|
|
|
|
static int ftgmac100_reset_and_config_mac(struct ftgmac100 *priv)
|
|
{
|
|
u32 maccr = 0;
|
|
|
|
switch (priv->cur_speed) {
|
|
case SPEED_10:
|
|
case 0: /* no link */
|
|
break;
|
|
|
|
case SPEED_100:
|
|
maccr |= FTGMAC100_MACCR_FAST_MODE;
|
|
break;
|
|
|
|
case SPEED_1000:
|
|
maccr |= FTGMAC100_MACCR_GIGA_MODE;
|
|
break;
|
|
default:
|
|
netdev_err(priv->netdev, "Unknown speed %d !\n",
|
|
priv->cur_speed);
|
|
break;
|
|
}
|
|
|
|
/* (Re)initialize the queue pointers */
|
|
priv->rx_pointer = 0;
|
|
priv->tx_clean_pointer = 0;
|
|
priv->tx_pointer = 0;
|
|
|
|
/* The doc says reset twice with 10us interval */
|
|
if (ftgmac100_reset_mac(priv, maccr))
|
|
return -EIO;
|
|
usleep_range(10, 1000);
|
|
return ftgmac100_reset_mac(priv, maccr);
|
|
}
|
|
|
|
static void ftgmac100_write_mac_addr(struct ftgmac100 *priv, const u8 *mac)
|
|
{
|
|
unsigned int maddr = mac[0] << 8 | mac[1];
|
|
unsigned int laddr = mac[2] << 24 | mac[3] << 16 | mac[4] << 8 | mac[5];
|
|
|
|
iowrite32(maddr, priv->base + FTGMAC100_OFFSET_MAC_MADR);
|
|
iowrite32(laddr, priv->base + FTGMAC100_OFFSET_MAC_LADR);
|
|
}
|
|
|
|
static void ftgmac100_initial_mac(struct ftgmac100 *priv)
|
|
{
|
|
u8 mac[ETH_ALEN];
|
|
unsigned int m;
|
|
unsigned int l;
|
|
void *addr;
|
|
|
|
addr = device_get_mac_address(priv->dev, mac, ETH_ALEN);
|
|
if (addr) {
|
|
ether_addr_copy(priv->netdev->dev_addr, mac);
|
|
dev_info(priv->dev, "Read MAC address %pM from device tree\n",
|
|
mac);
|
|
return;
|
|
}
|
|
|
|
m = ioread32(priv->base + FTGMAC100_OFFSET_MAC_MADR);
|
|
l = ioread32(priv->base + FTGMAC100_OFFSET_MAC_LADR);
|
|
|
|
mac[0] = (m >> 8) & 0xff;
|
|
mac[1] = m & 0xff;
|
|
mac[2] = (l >> 24) & 0xff;
|
|
mac[3] = (l >> 16) & 0xff;
|
|
mac[4] = (l >> 8) & 0xff;
|
|
mac[5] = l & 0xff;
|
|
|
|
if (is_valid_ether_addr(mac)) {
|
|
ether_addr_copy(priv->netdev->dev_addr, mac);
|
|
dev_info(priv->dev, "Read MAC address %pM from chip\n", mac);
|
|
} else {
|
|
eth_hw_addr_random(priv->netdev);
|
|
dev_info(priv->dev, "Generated random MAC address %pM\n",
|
|
priv->netdev->dev_addr);
|
|
}
|
|
}
|
|
|
|
static int ftgmac100_set_mac_addr(struct net_device *dev, void *p)
|
|
{
|
|
int ret;
|
|
|
|
ret = eth_prepare_mac_addr_change(dev, p);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
eth_commit_mac_addr_change(dev, p);
|
|
ftgmac100_write_mac_addr(netdev_priv(dev), dev->dev_addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ftgmac100_config_pause(struct ftgmac100 *priv)
|
|
{
|
|
u32 fcr = FTGMAC100_FCR_PAUSE_TIME(16);
|
|
|
|
/* Throttle tx queue when receiving pause frames */
|
|
if (priv->rx_pause)
|
|
fcr |= FTGMAC100_FCR_FC_EN;
|
|
|
|
/* Enables sending pause frames when the RX queue is past a
|
|
* certain threshold.
|
|
*/
|
|
if (priv->tx_pause)
|
|
fcr |= FTGMAC100_FCR_FCTHR_EN;
|
|
|
|
iowrite32(fcr, priv->base + FTGMAC100_OFFSET_FCR);
|
|
}
|
|
|
|
static void ftgmac100_init_hw(struct ftgmac100 *priv)
|
|
{
|
|
u32 reg, rfifo_sz, tfifo_sz;
|
|
|
|
/* Clear stale interrupts */
|
|
reg = ioread32(priv->base + FTGMAC100_OFFSET_ISR);
|
|
iowrite32(reg, priv->base + FTGMAC100_OFFSET_ISR);
|
|
|
|
/* Setup RX ring buffer base */
|
|
iowrite32(priv->rxdes_dma, priv->base + FTGMAC100_OFFSET_RXR_BADR);
|
|
|
|
/* Setup TX ring buffer base */
|
|
iowrite32(priv->txdes_dma, priv->base + FTGMAC100_OFFSET_NPTXR_BADR);
|
|
|
|
/* Configure RX buffer size */
|
|
iowrite32(FTGMAC100_RBSR_SIZE(RX_BUF_SIZE),
|
|
priv->base + FTGMAC100_OFFSET_RBSR);
|
|
|
|
/* Set RX descriptor autopoll */
|
|
iowrite32(FTGMAC100_APTC_RXPOLL_CNT(1),
|
|
priv->base + FTGMAC100_OFFSET_APTC);
|
|
|
|
/* Write MAC address */
|
|
ftgmac100_write_mac_addr(priv, priv->netdev->dev_addr);
|
|
|
|
/* Write multicast filter */
|
|
iowrite32(priv->maht0, priv->base + FTGMAC100_OFFSET_MAHT0);
|
|
iowrite32(priv->maht1, priv->base + FTGMAC100_OFFSET_MAHT1);
|
|
|
|
/* Configure descriptor sizes and increase burst sizes according
|
|
* to values in Aspeed SDK. The FIFO arbitration is enabled and
|
|
* the thresholds set based on the recommended values in the
|
|
* AST2400 specification.
|
|
*/
|
|
iowrite32(FTGMAC100_DBLAC_RXDES_SIZE(2) | /* 2*8 bytes RX descs */
|
|
FTGMAC100_DBLAC_TXDES_SIZE(2) | /* 2*8 bytes TX descs */
|
|
FTGMAC100_DBLAC_RXBURST_SIZE(3) | /* 512 bytes max RX bursts */
|
|
FTGMAC100_DBLAC_TXBURST_SIZE(3) | /* 512 bytes max TX bursts */
|
|
FTGMAC100_DBLAC_RX_THR_EN | /* Enable fifo threshold arb */
|
|
FTGMAC100_DBLAC_RXFIFO_HTHR(6) | /* 6/8 of FIFO high threshold */
|
|
FTGMAC100_DBLAC_RXFIFO_LTHR(2), /* 2/8 of FIFO low threshold */
|
|
priv->base + FTGMAC100_OFFSET_DBLAC);
|
|
|
|
/* Interrupt mitigation configured for 1 interrupt/packet. HW interrupt
|
|
* mitigation doesn't seem to provide any benefit with NAPI so leave
|
|
* it at that.
|
|
*/
|
|
iowrite32(FTGMAC100_ITC_RXINT_THR(1) |
|
|
FTGMAC100_ITC_TXINT_THR(1),
|
|
priv->base + FTGMAC100_OFFSET_ITC);
|
|
|
|
/* Configure FIFO sizes in the TPAFCR register */
|
|
reg = ioread32(priv->base + FTGMAC100_OFFSET_FEAR);
|
|
rfifo_sz = reg & 0x00000007;
|
|
tfifo_sz = (reg >> 3) & 0x00000007;
|
|
reg = ioread32(priv->base + FTGMAC100_OFFSET_TPAFCR);
|
|
reg &= ~0x3f000000;
|
|
reg |= (tfifo_sz << 27);
|
|
reg |= (rfifo_sz << 24);
|
|
iowrite32(reg, priv->base + FTGMAC100_OFFSET_TPAFCR);
|
|
}
|
|
|
|
static void ftgmac100_start_hw(struct ftgmac100 *priv)
|
|
{
|
|
u32 maccr = ioread32(priv->base + FTGMAC100_OFFSET_MACCR);
|
|
|
|
/* Keep the original GMAC and FAST bits */
|
|
maccr &= (FTGMAC100_MACCR_FAST_MODE | FTGMAC100_MACCR_GIGA_MODE);
|
|
|
|
/* Add all the main enable bits */
|
|
maccr |= FTGMAC100_MACCR_TXDMA_EN |
|
|
FTGMAC100_MACCR_RXDMA_EN |
|
|
FTGMAC100_MACCR_TXMAC_EN |
|
|
FTGMAC100_MACCR_RXMAC_EN |
|
|
FTGMAC100_MACCR_CRC_APD |
|
|
FTGMAC100_MACCR_PHY_LINK_LEVEL |
|
|
FTGMAC100_MACCR_RX_RUNT |
|
|
FTGMAC100_MACCR_RX_BROADPKT;
|
|
|
|
/* Add other bits as needed */
|
|
if (priv->cur_duplex == DUPLEX_FULL)
|
|
maccr |= FTGMAC100_MACCR_FULLDUP;
|
|
if (priv->netdev->flags & IFF_PROMISC)
|
|
maccr |= FTGMAC100_MACCR_RX_ALL;
|
|
if (priv->netdev->flags & IFF_ALLMULTI)
|
|
maccr |= FTGMAC100_MACCR_RX_MULTIPKT;
|
|
else if (netdev_mc_count(priv->netdev))
|
|
maccr |= FTGMAC100_MACCR_HT_MULTI_EN;
|
|
|
|
/* Vlan filtering enabled */
|
|
if (priv->netdev->features & NETIF_F_HW_VLAN_CTAG_RX)
|
|
maccr |= FTGMAC100_MACCR_RM_VLAN;
|
|
|
|
/* Hit the HW */
|
|
iowrite32(maccr, priv->base + FTGMAC100_OFFSET_MACCR);
|
|
}
|
|
|
|
static void ftgmac100_stop_hw(struct ftgmac100 *priv)
|
|
{
|
|
iowrite32(0, priv->base + FTGMAC100_OFFSET_MACCR);
|
|
}
|
|
|
|
static void ftgmac100_calc_mc_hash(struct ftgmac100 *priv)
|
|
{
|
|
struct netdev_hw_addr *ha;
|
|
|
|
priv->maht1 = 0;
|
|
priv->maht0 = 0;
|
|
netdev_for_each_mc_addr(ha, priv->netdev) {
|
|
u32 crc_val = ether_crc_le(ETH_ALEN, ha->addr);
|
|
|
|
crc_val = (~(crc_val >> 2)) & 0x3f;
|
|
if (crc_val >= 32)
|
|
priv->maht1 |= 1ul << (crc_val - 32);
|
|
else
|
|
priv->maht0 |= 1ul << (crc_val);
|
|
}
|
|
}
|
|
|
|
static void ftgmac100_set_rx_mode(struct net_device *netdev)
|
|
{
|
|
struct ftgmac100 *priv = netdev_priv(netdev);
|
|
|
|
/* Setup the hash filter */
|
|
ftgmac100_calc_mc_hash(priv);
|
|
|
|
/* Interface down ? that's all there is to do */
|
|
if (!netif_running(netdev))
|
|
return;
|
|
|
|
/* Update the HW */
|
|
iowrite32(priv->maht0, priv->base + FTGMAC100_OFFSET_MAHT0);
|
|
iowrite32(priv->maht1, priv->base + FTGMAC100_OFFSET_MAHT1);
|
|
|
|
/* Reconfigure MACCR */
|
|
ftgmac100_start_hw(priv);
|
|
}
|
|
|
|
static int ftgmac100_alloc_rx_buf(struct ftgmac100 *priv, unsigned int entry,
|
|
struct ftgmac100_rxdes *rxdes, gfp_t gfp)
|
|
{
|
|
struct net_device *netdev = priv->netdev;
|
|
struct sk_buff *skb;
|
|
dma_addr_t map;
|
|
int err = 0;
|
|
|
|
skb = netdev_alloc_skb_ip_align(netdev, RX_BUF_SIZE);
|
|
if (unlikely(!skb)) {
|
|
if (net_ratelimit())
|
|
netdev_warn(netdev, "failed to allocate rx skb\n");
|
|
err = -ENOMEM;
|
|
map = priv->rx_scratch_dma;
|
|
} else {
|
|
map = dma_map_single(priv->dev, skb->data, RX_BUF_SIZE,
|
|
DMA_FROM_DEVICE);
|
|
if (unlikely(dma_mapping_error(priv->dev, map))) {
|
|
if (net_ratelimit())
|
|
netdev_err(netdev, "failed to map rx page\n");
|
|
dev_kfree_skb_any(skb);
|
|
map = priv->rx_scratch_dma;
|
|
skb = NULL;
|
|
err = -ENOMEM;
|
|
}
|
|
}
|
|
|
|
/* Store skb */
|
|
priv->rx_skbs[entry] = skb;
|
|
|
|
/* Store DMA address into RX desc */
|
|
rxdes->rxdes3 = cpu_to_le32(map);
|
|
|
|
/* Ensure the above is ordered vs clearing the OWN bit */
|
|
dma_wmb();
|
|
|
|
/* Clean status (which resets own bit) */
|
|
if (entry == (priv->rx_q_entries - 1))
|
|
rxdes->rxdes0 = cpu_to_le32(priv->rxdes0_edorr_mask);
|
|
else
|
|
rxdes->rxdes0 = 0;
|
|
|
|
return err;
|
|
}
|
|
|
|
static unsigned int ftgmac100_next_rx_pointer(struct ftgmac100 *priv,
|
|
unsigned int pointer)
|
|
{
|
|
return (pointer + 1) & (priv->rx_q_entries - 1);
|
|
}
|
|
|
|
static void ftgmac100_rx_packet_error(struct ftgmac100 *priv, u32 status)
|
|
{
|
|
struct net_device *netdev = priv->netdev;
|
|
|
|
if (status & FTGMAC100_RXDES0_RX_ERR)
|
|
netdev->stats.rx_errors++;
|
|
|
|
if (status & FTGMAC100_RXDES0_CRC_ERR)
|
|
netdev->stats.rx_crc_errors++;
|
|
|
|
if (status & (FTGMAC100_RXDES0_FTL |
|
|
FTGMAC100_RXDES0_RUNT |
|
|
FTGMAC100_RXDES0_RX_ODD_NB))
|
|
netdev->stats.rx_length_errors++;
|
|
}
|
|
|
|
static bool ftgmac100_rx_packet(struct ftgmac100 *priv, int *processed)
|
|
{
|
|
struct net_device *netdev = priv->netdev;
|
|
struct ftgmac100_rxdes *rxdes;
|
|
struct sk_buff *skb;
|
|
unsigned int pointer, size;
|
|
u32 status, csum_vlan;
|
|
dma_addr_t map;
|
|
|
|
/* Grab next RX descriptor */
|
|
pointer = priv->rx_pointer;
|
|
rxdes = &priv->rxdes[pointer];
|
|
|
|
/* Grab descriptor status */
|
|
status = le32_to_cpu(rxdes->rxdes0);
|
|
|
|
/* Do we have a packet ? */
|
|
if (!(status & FTGMAC100_RXDES0_RXPKT_RDY))
|
|
return false;
|
|
|
|
/* Order subsequent reads with the test for the ready bit */
|
|
dma_rmb();
|
|
|
|
/* We don't cope with fragmented RX packets */
|
|
if (unlikely(!(status & FTGMAC100_RXDES0_FRS) ||
|
|
!(status & FTGMAC100_RXDES0_LRS)))
|
|
goto drop;
|
|
|
|
/* Grab received size and csum vlan field in the descriptor */
|
|
size = status & FTGMAC100_RXDES0_VDBC;
|
|
csum_vlan = le32_to_cpu(rxdes->rxdes1);
|
|
|
|
/* Any error (other than csum offload) flagged ? */
|
|
if (unlikely(status & RXDES0_ANY_ERROR)) {
|
|
/* Correct for incorrect flagging of runt packets
|
|
* with vlan tags... Just accept a runt packet that
|
|
* has been flagged as vlan and whose size is at
|
|
* least 60 bytes.
|
|
*/
|
|
if ((status & FTGMAC100_RXDES0_RUNT) &&
|
|
(csum_vlan & FTGMAC100_RXDES1_VLANTAG_AVAIL) &&
|
|
(size >= 60))
|
|
status &= ~FTGMAC100_RXDES0_RUNT;
|
|
|
|
/* Any error still in there ? */
|
|
if (status & RXDES0_ANY_ERROR) {
|
|
ftgmac100_rx_packet_error(priv, status);
|
|
goto drop;
|
|
}
|
|
}
|
|
|
|
/* If the packet had no skb (failed to allocate earlier)
|
|
* then try to allocate one and skip
|
|
*/
|
|
skb = priv->rx_skbs[pointer];
|
|
if (!unlikely(skb)) {
|
|
ftgmac100_alloc_rx_buf(priv, pointer, rxdes, GFP_ATOMIC);
|
|
goto drop;
|
|
}
|
|
|
|
if (unlikely(status & FTGMAC100_RXDES0_MULTICAST))
|
|
netdev->stats.multicast++;
|
|
|
|
/* If the HW found checksum errors, bounce it to software.
|
|
*
|
|
* If we didn't, we need to see if the packet was recognized
|
|
* by HW as one of the supported checksummed protocols before
|
|
* we accept the HW test results.
|
|
*/
|
|
if (netdev->features & NETIF_F_RXCSUM) {
|
|
u32 err_bits = FTGMAC100_RXDES1_TCP_CHKSUM_ERR |
|
|
FTGMAC100_RXDES1_UDP_CHKSUM_ERR |
|
|
FTGMAC100_RXDES1_IP_CHKSUM_ERR;
|
|
if ((csum_vlan & err_bits) ||
|
|
!(csum_vlan & FTGMAC100_RXDES1_PROT_MASK))
|
|
skb->ip_summed = CHECKSUM_NONE;
|
|
else
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
}
|
|
|
|
/* Transfer received size to skb */
|
|
skb_put(skb, size);
|
|
|
|
/* Extract vlan tag */
|
|
if ((netdev->features & NETIF_F_HW_VLAN_CTAG_RX) &&
|
|
(csum_vlan & FTGMAC100_RXDES1_VLANTAG_AVAIL))
|
|
__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
|
|
csum_vlan & 0xffff);
|
|
|
|
/* Tear down DMA mapping, do necessary cache management */
|
|
map = le32_to_cpu(rxdes->rxdes3);
|
|
|
|
#if defined(CONFIG_ARM) && !defined(CONFIG_ARM_DMA_USE_IOMMU)
|
|
/* When we don't have an iommu, we can save cycles by not
|
|
* invalidating the cache for the part of the packet that
|
|
* wasn't received.
|
|
*/
|
|
dma_unmap_single(priv->dev, map, size, DMA_FROM_DEVICE);
|
|
#else
|
|
dma_unmap_single(priv->dev, map, RX_BUF_SIZE, DMA_FROM_DEVICE);
|
|
#endif
|
|
|
|
|
|
/* Resplenish rx ring */
|
|
ftgmac100_alloc_rx_buf(priv, pointer, rxdes, GFP_ATOMIC);
|
|
priv->rx_pointer = ftgmac100_next_rx_pointer(priv, pointer);
|
|
|
|
skb->protocol = eth_type_trans(skb, netdev);
|
|
|
|
netdev->stats.rx_packets++;
|
|
netdev->stats.rx_bytes += size;
|
|
|
|
/* push packet to protocol stack */
|
|
if (skb->ip_summed == CHECKSUM_NONE)
|
|
netif_receive_skb(skb);
|
|
else
|
|
napi_gro_receive(&priv->napi, skb);
|
|
|
|
(*processed)++;
|
|
return true;
|
|
|
|
drop:
|
|
/* Clean rxdes0 (which resets own bit) */
|
|
rxdes->rxdes0 = cpu_to_le32(status & priv->rxdes0_edorr_mask);
|
|
priv->rx_pointer = ftgmac100_next_rx_pointer(priv, pointer);
|
|
netdev->stats.rx_dropped++;
|
|
return true;
|
|
}
|
|
|
|
static u32 ftgmac100_base_tx_ctlstat(struct ftgmac100 *priv,
|
|
unsigned int index)
|
|
{
|
|
if (index == (priv->tx_q_entries - 1))
|
|
return priv->txdes0_edotr_mask;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int ftgmac100_next_tx_pointer(struct ftgmac100 *priv,
|
|
unsigned int pointer)
|
|
{
|
|
return (pointer + 1) & (priv->tx_q_entries - 1);
|
|
}
|
|
|
|
static u32 ftgmac100_tx_buf_avail(struct ftgmac100 *priv)
|
|
{
|
|
/* Returns the number of available slots in the TX queue
|
|
*
|
|
* This always leaves one free slot so we don't have to
|
|
* worry about empty vs. full, and this simplifies the
|
|
* test for ftgmac100_tx_buf_cleanable() below
|
|
*/
|
|
return (priv->tx_clean_pointer - priv->tx_pointer - 1) &
|
|
(priv->tx_q_entries - 1);
|
|
}
|
|
|
|
static bool ftgmac100_tx_buf_cleanable(struct ftgmac100 *priv)
|
|
{
|
|
return priv->tx_pointer != priv->tx_clean_pointer;
|
|
}
|
|
|
|
static void ftgmac100_free_tx_packet(struct ftgmac100 *priv,
|
|
unsigned int pointer,
|
|
struct sk_buff *skb,
|
|
struct ftgmac100_txdes *txdes,
|
|
u32 ctl_stat)
|
|
{
|
|
dma_addr_t map = le32_to_cpu(txdes->txdes3);
|
|
size_t len;
|
|
|
|
if (ctl_stat & FTGMAC100_TXDES0_FTS) {
|
|
len = skb_headlen(skb);
|
|
dma_unmap_single(priv->dev, map, len, DMA_TO_DEVICE);
|
|
} else {
|
|
len = FTGMAC100_TXDES0_TXBUF_SIZE(ctl_stat);
|
|
dma_unmap_page(priv->dev, map, len, DMA_TO_DEVICE);
|
|
}
|
|
|
|
/* Free SKB on last segment */
|
|
if (ctl_stat & FTGMAC100_TXDES0_LTS)
|
|
dev_kfree_skb(skb);
|
|
priv->tx_skbs[pointer] = NULL;
|
|
}
|
|
|
|
static bool ftgmac100_tx_complete_packet(struct ftgmac100 *priv)
|
|
{
|
|
struct net_device *netdev = priv->netdev;
|
|
struct ftgmac100_txdes *txdes;
|
|
struct sk_buff *skb;
|
|
unsigned int pointer;
|
|
u32 ctl_stat;
|
|
|
|
pointer = priv->tx_clean_pointer;
|
|
txdes = &priv->txdes[pointer];
|
|
|
|
ctl_stat = le32_to_cpu(txdes->txdes0);
|
|
if (ctl_stat & FTGMAC100_TXDES0_TXDMA_OWN)
|
|
return false;
|
|
|
|
skb = priv->tx_skbs[pointer];
|
|
netdev->stats.tx_packets++;
|
|
netdev->stats.tx_bytes += skb->len;
|
|
ftgmac100_free_tx_packet(priv, pointer, skb, txdes, ctl_stat);
|
|
txdes->txdes0 = cpu_to_le32(ctl_stat & priv->txdes0_edotr_mask);
|
|
|
|
priv->tx_clean_pointer = ftgmac100_next_tx_pointer(priv, pointer);
|
|
|
|
return true;
|
|
}
|
|
|
|
static void ftgmac100_tx_complete(struct ftgmac100 *priv)
|
|
{
|
|
struct net_device *netdev = priv->netdev;
|
|
|
|
/* Process all completed packets */
|
|
while (ftgmac100_tx_buf_cleanable(priv) &&
|
|
ftgmac100_tx_complete_packet(priv))
|
|
;
|
|
|
|
/* Restart queue if needed */
|
|
smp_mb();
|
|
if (unlikely(netif_queue_stopped(netdev) &&
|
|
ftgmac100_tx_buf_avail(priv) >= TX_THRESHOLD)) {
|
|
struct netdev_queue *txq;
|
|
|
|
txq = netdev_get_tx_queue(netdev, 0);
|
|
__netif_tx_lock(txq, smp_processor_id());
|
|
if (netif_queue_stopped(netdev) &&
|
|
ftgmac100_tx_buf_avail(priv) >= TX_THRESHOLD)
|
|
netif_wake_queue(netdev);
|
|
__netif_tx_unlock(txq);
|
|
}
|
|
}
|
|
|
|
static bool ftgmac100_prep_tx_csum(struct sk_buff *skb, u32 *csum_vlan)
|
|
{
|
|
if (skb->protocol == cpu_to_be16(ETH_P_IP)) {
|
|
u8 ip_proto = ip_hdr(skb)->protocol;
|
|
|
|
*csum_vlan |= FTGMAC100_TXDES1_IP_CHKSUM;
|
|
switch(ip_proto) {
|
|
case IPPROTO_TCP:
|
|
*csum_vlan |= FTGMAC100_TXDES1_TCP_CHKSUM;
|
|
return true;
|
|
case IPPROTO_UDP:
|
|
*csum_vlan |= FTGMAC100_TXDES1_UDP_CHKSUM;
|
|
return true;
|
|
case IPPROTO_IP:
|
|
return true;
|
|
}
|
|
}
|
|
return skb_checksum_help(skb) == 0;
|
|
}
|
|
|
|
static int ftgmac100_hard_start_xmit(struct sk_buff *skb,
|
|
struct net_device *netdev)
|
|
{
|
|
struct ftgmac100 *priv = netdev_priv(netdev);
|
|
struct ftgmac100_txdes *txdes, *first;
|
|
unsigned int pointer, nfrags, len, i, j;
|
|
u32 f_ctl_stat, ctl_stat, csum_vlan;
|
|
dma_addr_t map;
|
|
|
|
/* The HW doesn't pad small frames */
|
|
if (eth_skb_pad(skb)) {
|
|
netdev->stats.tx_dropped++;
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/* Reject oversize packets */
|
|
if (unlikely(skb->len > MAX_PKT_SIZE)) {
|
|
if (net_ratelimit())
|
|
netdev_dbg(netdev, "tx packet too big\n");
|
|
goto drop;
|
|
}
|
|
|
|
/* Do we have a limit on #fragments ? I yet have to get a reply
|
|
* from Aspeed. If there's one I haven't hit it.
|
|
*/
|
|
nfrags = skb_shinfo(skb)->nr_frags;
|
|
|
|
/* Get header len */
|
|
len = skb_headlen(skb);
|
|
|
|
/* Map the packet head */
|
|
map = dma_map_single(priv->dev, skb->data, len, DMA_TO_DEVICE);
|
|
if (dma_mapping_error(priv->dev, map)) {
|
|
if (net_ratelimit())
|
|
netdev_err(netdev, "map tx packet head failed\n");
|
|
goto drop;
|
|
}
|
|
|
|
/* Grab the next free tx descriptor */
|
|
pointer = priv->tx_pointer;
|
|
txdes = first = &priv->txdes[pointer];
|
|
|
|
/* Setup it up with the packet head. Don't write the head to the
|
|
* ring just yet
|
|
*/
|
|
priv->tx_skbs[pointer] = skb;
|
|
f_ctl_stat = ftgmac100_base_tx_ctlstat(priv, pointer);
|
|
f_ctl_stat |= FTGMAC100_TXDES0_TXDMA_OWN;
|
|
f_ctl_stat |= FTGMAC100_TXDES0_TXBUF_SIZE(len);
|
|
f_ctl_stat |= FTGMAC100_TXDES0_FTS;
|
|
if (nfrags == 0)
|
|
f_ctl_stat |= FTGMAC100_TXDES0_LTS;
|
|
txdes->txdes3 = cpu_to_le32(map);
|
|
|
|
/* Setup HW checksumming */
|
|
csum_vlan = 0;
|
|
if (skb->ip_summed == CHECKSUM_PARTIAL &&
|
|
!ftgmac100_prep_tx_csum(skb, &csum_vlan))
|
|
goto drop;
|
|
|
|
/* Add VLAN tag */
|
|
if (skb_vlan_tag_present(skb)) {
|
|
csum_vlan |= FTGMAC100_TXDES1_INS_VLANTAG;
|
|
csum_vlan |= skb_vlan_tag_get(skb) & 0xffff;
|
|
}
|
|
|
|
txdes->txdes1 = cpu_to_le32(csum_vlan);
|
|
|
|
/* Next descriptor */
|
|
pointer = ftgmac100_next_tx_pointer(priv, pointer);
|
|
|
|
/* Add the fragments */
|
|
for (i = 0; i < nfrags; i++) {
|
|
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
|
|
|
|
len = frag->size;
|
|
|
|
/* Map it */
|
|
map = skb_frag_dma_map(priv->dev, frag, 0, len,
|
|
DMA_TO_DEVICE);
|
|
if (dma_mapping_error(priv->dev, map))
|
|
goto dma_err;
|
|
|
|
/* Setup descriptor */
|
|
priv->tx_skbs[pointer] = skb;
|
|
txdes = &priv->txdes[pointer];
|
|
ctl_stat = ftgmac100_base_tx_ctlstat(priv, pointer);
|
|
ctl_stat |= FTGMAC100_TXDES0_TXDMA_OWN;
|
|
ctl_stat |= FTGMAC100_TXDES0_TXBUF_SIZE(len);
|
|
if (i == (nfrags - 1))
|
|
ctl_stat |= FTGMAC100_TXDES0_LTS;
|
|
txdes->txdes0 = cpu_to_le32(ctl_stat);
|
|
txdes->txdes1 = 0;
|
|
txdes->txdes3 = cpu_to_le32(map);
|
|
|
|
/* Next one */
|
|
pointer = ftgmac100_next_tx_pointer(priv, pointer);
|
|
}
|
|
|
|
/* Order the previous packet and descriptor udpates
|
|
* before setting the OWN bit on the first descriptor.
|
|
*/
|
|
dma_wmb();
|
|
first->txdes0 = cpu_to_le32(f_ctl_stat);
|
|
|
|
/* Update next TX pointer */
|
|
priv->tx_pointer = pointer;
|
|
|
|
/* If there isn't enough room for all the fragments of a new packet
|
|
* in the TX ring, stop the queue. The sequence below is race free
|
|
* vs. a concurrent restart in ftgmac100_poll()
|
|
*/
|
|
if (unlikely(ftgmac100_tx_buf_avail(priv) < TX_THRESHOLD)) {
|
|
netif_stop_queue(netdev);
|
|
/* Order the queue stop with the test below */
|
|
smp_mb();
|
|
if (ftgmac100_tx_buf_avail(priv) >= TX_THRESHOLD)
|
|
netif_wake_queue(netdev);
|
|
}
|
|
|
|
/* Poke transmitter to read the updated TX descriptors */
|
|
iowrite32(1, priv->base + FTGMAC100_OFFSET_NPTXPD);
|
|
|
|
return NETDEV_TX_OK;
|
|
|
|
dma_err:
|
|
if (net_ratelimit())
|
|
netdev_err(netdev, "map tx fragment failed\n");
|
|
|
|
/* Free head */
|
|
pointer = priv->tx_pointer;
|
|
ftgmac100_free_tx_packet(priv, pointer, skb, first, f_ctl_stat);
|
|
first->txdes0 = cpu_to_le32(f_ctl_stat & priv->txdes0_edotr_mask);
|
|
|
|
/* Then all fragments */
|
|
for (j = 0; j < i; j++) {
|
|
pointer = ftgmac100_next_tx_pointer(priv, pointer);
|
|
txdes = &priv->txdes[pointer];
|
|
ctl_stat = le32_to_cpu(txdes->txdes0);
|
|
ftgmac100_free_tx_packet(priv, pointer, skb, txdes, ctl_stat);
|
|
txdes->txdes0 = cpu_to_le32(ctl_stat & priv->txdes0_edotr_mask);
|
|
}
|
|
|
|
/* This cannot be reached if we successfully mapped the
|
|
* last fragment, so we know ftgmac100_free_tx_packet()
|
|
* hasn't freed the skb yet.
|
|
*/
|
|
drop:
|
|
/* Drop the packet */
|
|
dev_kfree_skb_any(skb);
|
|
netdev->stats.tx_dropped++;
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
static void ftgmac100_free_buffers(struct ftgmac100 *priv)
|
|
{
|
|
int i;
|
|
|
|
/* Free all RX buffers */
|
|
for (i = 0; i < priv->rx_q_entries; i++) {
|
|
struct ftgmac100_rxdes *rxdes = &priv->rxdes[i];
|
|
struct sk_buff *skb = priv->rx_skbs[i];
|
|
dma_addr_t map = le32_to_cpu(rxdes->rxdes3);
|
|
|
|
if (!skb)
|
|
continue;
|
|
|
|
priv->rx_skbs[i] = NULL;
|
|
dma_unmap_single(priv->dev, map, RX_BUF_SIZE, DMA_FROM_DEVICE);
|
|
dev_kfree_skb_any(skb);
|
|
}
|
|
|
|
/* Free all TX buffers */
|
|
for (i = 0; i < priv->tx_q_entries; i++) {
|
|
struct ftgmac100_txdes *txdes = &priv->txdes[i];
|
|
struct sk_buff *skb = priv->tx_skbs[i];
|
|
|
|
if (!skb)
|
|
continue;
|
|
ftgmac100_free_tx_packet(priv, i, skb, txdes,
|
|
le32_to_cpu(txdes->txdes0));
|
|
}
|
|
}
|
|
|
|
static void ftgmac100_free_rings(struct ftgmac100 *priv)
|
|
{
|
|
/* Free skb arrays */
|
|
kfree(priv->rx_skbs);
|
|
kfree(priv->tx_skbs);
|
|
|
|
/* Free descriptors */
|
|
if (priv->rxdes)
|
|
dma_free_coherent(priv->dev, MAX_RX_QUEUE_ENTRIES *
|
|
sizeof(struct ftgmac100_rxdes),
|
|
priv->rxdes, priv->rxdes_dma);
|
|
priv->rxdes = NULL;
|
|
|
|
if (priv->txdes)
|
|
dma_free_coherent(priv->dev, MAX_TX_QUEUE_ENTRIES *
|
|
sizeof(struct ftgmac100_txdes),
|
|
priv->txdes, priv->txdes_dma);
|
|
priv->txdes = NULL;
|
|
|
|
/* Free scratch packet buffer */
|
|
if (priv->rx_scratch)
|
|
dma_free_coherent(priv->dev, RX_BUF_SIZE,
|
|
priv->rx_scratch, priv->rx_scratch_dma);
|
|
}
|
|
|
|
static int ftgmac100_alloc_rings(struct ftgmac100 *priv)
|
|
{
|
|
/* Allocate skb arrays */
|
|
priv->rx_skbs = kcalloc(MAX_RX_QUEUE_ENTRIES, sizeof(void *),
|
|
GFP_KERNEL);
|
|
if (!priv->rx_skbs)
|
|
return -ENOMEM;
|
|
priv->tx_skbs = kcalloc(MAX_TX_QUEUE_ENTRIES, sizeof(void *),
|
|
GFP_KERNEL);
|
|
if (!priv->tx_skbs)
|
|
return -ENOMEM;
|
|
|
|
/* Allocate descriptors */
|
|
priv->rxdes = dma_zalloc_coherent(priv->dev,
|
|
MAX_RX_QUEUE_ENTRIES *
|
|
sizeof(struct ftgmac100_rxdes),
|
|
&priv->rxdes_dma, GFP_KERNEL);
|
|
if (!priv->rxdes)
|
|
return -ENOMEM;
|
|
priv->txdes = dma_zalloc_coherent(priv->dev,
|
|
MAX_TX_QUEUE_ENTRIES *
|
|
sizeof(struct ftgmac100_txdes),
|
|
&priv->txdes_dma, GFP_KERNEL);
|
|
if (!priv->txdes)
|
|
return -ENOMEM;
|
|
|
|
/* Allocate scratch packet buffer */
|
|
priv->rx_scratch = dma_alloc_coherent(priv->dev,
|
|
RX_BUF_SIZE,
|
|
&priv->rx_scratch_dma,
|
|
GFP_KERNEL);
|
|
if (!priv->rx_scratch)
|
|
return -ENOMEM;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ftgmac100_init_rings(struct ftgmac100 *priv)
|
|
{
|
|
struct ftgmac100_rxdes *rxdes = NULL;
|
|
struct ftgmac100_txdes *txdes = NULL;
|
|
int i;
|
|
|
|
/* Update entries counts */
|
|
priv->rx_q_entries = priv->new_rx_q_entries;
|
|
priv->tx_q_entries = priv->new_tx_q_entries;
|
|
|
|
if (WARN_ON(priv->rx_q_entries < MIN_RX_QUEUE_ENTRIES))
|
|
return;
|
|
|
|
/* Initialize RX ring */
|
|
for (i = 0; i < priv->rx_q_entries; i++) {
|
|
rxdes = &priv->rxdes[i];
|
|
rxdes->rxdes0 = 0;
|
|
rxdes->rxdes3 = cpu_to_le32(priv->rx_scratch_dma);
|
|
}
|
|
/* Mark the end of the ring */
|
|
rxdes->rxdes0 |= cpu_to_le32(priv->rxdes0_edorr_mask);
|
|
|
|
if (WARN_ON(priv->tx_q_entries < MIN_RX_QUEUE_ENTRIES))
|
|
return;
|
|
|
|
/* Initialize TX ring */
|
|
for (i = 0; i < priv->tx_q_entries; i++) {
|
|
txdes = &priv->txdes[i];
|
|
txdes->txdes0 = 0;
|
|
}
|
|
txdes->txdes0 |= cpu_to_le32(priv->txdes0_edotr_mask);
|
|
}
|
|
|
|
static int ftgmac100_alloc_rx_buffers(struct ftgmac100 *priv)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < priv->rx_q_entries; i++) {
|
|
struct ftgmac100_rxdes *rxdes = &priv->rxdes[i];
|
|
|
|
if (ftgmac100_alloc_rx_buf(priv, i, rxdes, GFP_KERNEL))
|
|
return -ENOMEM;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void ftgmac100_adjust_link(struct net_device *netdev)
|
|
{
|
|
struct ftgmac100 *priv = netdev_priv(netdev);
|
|
struct phy_device *phydev = netdev->phydev;
|
|
bool tx_pause, rx_pause;
|
|
int new_speed;
|
|
|
|
/* We store "no link" as speed 0 */
|
|
if (!phydev->link)
|
|
new_speed = 0;
|
|
else
|
|
new_speed = phydev->speed;
|
|
|
|
/* Grab pause settings from PHY if configured to do so */
|
|
if (priv->aneg_pause) {
|
|
rx_pause = tx_pause = phydev->pause;
|
|
if (phydev->asym_pause)
|
|
tx_pause = !rx_pause;
|
|
} else {
|
|
rx_pause = priv->rx_pause;
|
|
tx_pause = priv->tx_pause;
|
|
}
|
|
|
|
/* Link hasn't changed, do nothing */
|
|
if (phydev->speed == priv->cur_speed &&
|
|
phydev->duplex == priv->cur_duplex &&
|
|
rx_pause == priv->rx_pause &&
|
|
tx_pause == priv->tx_pause)
|
|
return;
|
|
|
|
/* Print status if we have a link or we had one and just lost it,
|
|
* don't print otherwise.
|
|
*/
|
|
if (new_speed || priv->cur_speed)
|
|
phy_print_status(phydev);
|
|
|
|
priv->cur_speed = new_speed;
|
|
priv->cur_duplex = phydev->duplex;
|
|
priv->rx_pause = rx_pause;
|
|
priv->tx_pause = tx_pause;
|
|
|
|
/* Link is down, do nothing else */
|
|
if (!new_speed)
|
|
return;
|
|
|
|
/* Disable all interrupts */
|
|
iowrite32(0, priv->base + FTGMAC100_OFFSET_IER);
|
|
|
|
/* Reset the adapter asynchronously */
|
|
schedule_work(&priv->reset_task);
|
|
}
|
|
|
|
static int ftgmac100_mii_probe(struct ftgmac100 *priv, phy_interface_t intf)
|
|
{
|
|
struct net_device *netdev = priv->netdev;
|
|
struct phy_device *phydev;
|
|
|
|
phydev = phy_find_first(priv->mii_bus);
|
|
if (!phydev) {
|
|
netdev_info(netdev, "%s: no PHY found\n", netdev->name);
|
|
return -ENODEV;
|
|
}
|
|
|
|
phydev = phy_connect(netdev, phydev_name(phydev),
|
|
&ftgmac100_adjust_link, intf);
|
|
|
|
if (IS_ERR(phydev)) {
|
|
netdev_err(netdev, "%s: Could not attach to PHY\n", netdev->name);
|
|
return PTR_ERR(phydev);
|
|
}
|
|
|
|
/* Indicate that we support PAUSE frames (see comment in
|
|
* Documentation/networking/phy.txt)
|
|
*/
|
|
phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause;
|
|
phydev->advertising = phydev->supported;
|
|
|
|
/* Display what we found */
|
|
phy_attached_info(phydev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ftgmac100_mdiobus_read(struct mii_bus *bus, int phy_addr, int regnum)
|
|
{
|
|
struct net_device *netdev = bus->priv;
|
|
struct ftgmac100 *priv = netdev_priv(netdev);
|
|
unsigned int phycr;
|
|
int i;
|
|
|
|
phycr = ioread32(priv->base + FTGMAC100_OFFSET_PHYCR);
|
|
|
|
/* preserve MDC cycle threshold */
|
|
phycr &= FTGMAC100_PHYCR_MDC_CYCTHR_MASK;
|
|
|
|
phycr |= FTGMAC100_PHYCR_PHYAD(phy_addr) |
|
|
FTGMAC100_PHYCR_REGAD(regnum) |
|
|
FTGMAC100_PHYCR_MIIRD;
|
|
|
|
iowrite32(phycr, priv->base + FTGMAC100_OFFSET_PHYCR);
|
|
|
|
for (i = 0; i < 10; i++) {
|
|
phycr = ioread32(priv->base + FTGMAC100_OFFSET_PHYCR);
|
|
|
|
if ((phycr & FTGMAC100_PHYCR_MIIRD) == 0) {
|
|
int data;
|
|
|
|
data = ioread32(priv->base + FTGMAC100_OFFSET_PHYDATA);
|
|
return FTGMAC100_PHYDATA_MIIRDATA(data);
|
|
}
|
|
|
|
udelay(100);
|
|
}
|
|
|
|
netdev_err(netdev, "mdio read timed out\n");
|
|
return -EIO;
|
|
}
|
|
|
|
static int ftgmac100_mdiobus_write(struct mii_bus *bus, int phy_addr,
|
|
int regnum, u16 value)
|
|
{
|
|
struct net_device *netdev = bus->priv;
|
|
struct ftgmac100 *priv = netdev_priv(netdev);
|
|
unsigned int phycr;
|
|
int data;
|
|
int i;
|
|
|
|
phycr = ioread32(priv->base + FTGMAC100_OFFSET_PHYCR);
|
|
|
|
/* preserve MDC cycle threshold */
|
|
phycr &= FTGMAC100_PHYCR_MDC_CYCTHR_MASK;
|
|
|
|
phycr |= FTGMAC100_PHYCR_PHYAD(phy_addr) |
|
|
FTGMAC100_PHYCR_REGAD(regnum) |
|
|
FTGMAC100_PHYCR_MIIWR;
|
|
|
|
data = FTGMAC100_PHYDATA_MIIWDATA(value);
|
|
|
|
iowrite32(data, priv->base + FTGMAC100_OFFSET_PHYDATA);
|
|
iowrite32(phycr, priv->base + FTGMAC100_OFFSET_PHYCR);
|
|
|
|
for (i = 0; i < 10; i++) {
|
|
phycr = ioread32(priv->base + FTGMAC100_OFFSET_PHYCR);
|
|
|
|
if ((phycr & FTGMAC100_PHYCR_MIIWR) == 0)
|
|
return 0;
|
|
|
|
udelay(100);
|
|
}
|
|
|
|
netdev_err(netdev, "mdio write timed out\n");
|
|
return -EIO;
|
|
}
|
|
|
|
static void ftgmac100_get_drvinfo(struct net_device *netdev,
|
|
struct ethtool_drvinfo *info)
|
|
{
|
|
strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
|
|
strlcpy(info->version, DRV_VERSION, sizeof(info->version));
|
|
strlcpy(info->bus_info, dev_name(&netdev->dev), sizeof(info->bus_info));
|
|
}
|
|
|
|
static void ftgmac100_get_ringparam(struct net_device *netdev,
|
|
struct ethtool_ringparam *ering)
|
|
{
|
|
struct ftgmac100 *priv = netdev_priv(netdev);
|
|
|
|
memset(ering, 0, sizeof(*ering));
|
|
ering->rx_max_pending = MAX_RX_QUEUE_ENTRIES;
|
|
ering->tx_max_pending = MAX_TX_QUEUE_ENTRIES;
|
|
ering->rx_pending = priv->rx_q_entries;
|
|
ering->tx_pending = priv->tx_q_entries;
|
|
}
|
|
|
|
static int ftgmac100_set_ringparam(struct net_device *netdev,
|
|
struct ethtool_ringparam *ering)
|
|
{
|
|
struct ftgmac100 *priv = netdev_priv(netdev);
|
|
|
|
if (ering->rx_pending > MAX_RX_QUEUE_ENTRIES ||
|
|
ering->tx_pending > MAX_TX_QUEUE_ENTRIES ||
|
|
ering->rx_pending < MIN_RX_QUEUE_ENTRIES ||
|
|
ering->tx_pending < MIN_TX_QUEUE_ENTRIES ||
|
|
!is_power_of_2(ering->rx_pending) ||
|
|
!is_power_of_2(ering->tx_pending))
|
|
return -EINVAL;
|
|
|
|
priv->new_rx_q_entries = ering->rx_pending;
|
|
priv->new_tx_q_entries = ering->tx_pending;
|
|
if (netif_running(netdev))
|
|
schedule_work(&priv->reset_task);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ftgmac100_get_pauseparam(struct net_device *netdev,
|
|
struct ethtool_pauseparam *pause)
|
|
{
|
|
struct ftgmac100 *priv = netdev_priv(netdev);
|
|
|
|
pause->autoneg = priv->aneg_pause;
|
|
pause->tx_pause = priv->tx_pause;
|
|
pause->rx_pause = priv->rx_pause;
|
|
}
|
|
|
|
static int ftgmac100_set_pauseparam(struct net_device *netdev,
|
|
struct ethtool_pauseparam *pause)
|
|
{
|
|
struct ftgmac100 *priv = netdev_priv(netdev);
|
|
struct phy_device *phydev = netdev->phydev;
|
|
|
|
priv->aneg_pause = pause->autoneg;
|
|
priv->tx_pause = pause->tx_pause;
|
|
priv->rx_pause = pause->rx_pause;
|
|
|
|
if (phydev) {
|
|
phydev->advertising &= ~ADVERTISED_Pause;
|
|
phydev->advertising &= ~ADVERTISED_Asym_Pause;
|
|
|
|
if (pause->rx_pause) {
|
|
phydev->advertising |= ADVERTISED_Pause;
|
|
phydev->advertising |= ADVERTISED_Asym_Pause;
|
|
}
|
|
|
|
if (pause->tx_pause)
|
|
phydev->advertising ^= ADVERTISED_Asym_Pause;
|
|
}
|
|
if (netif_running(netdev)) {
|
|
if (phydev && priv->aneg_pause)
|
|
phy_start_aneg(phydev);
|
|
else
|
|
ftgmac100_config_pause(priv);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct ethtool_ops ftgmac100_ethtool_ops = {
|
|
.get_drvinfo = ftgmac100_get_drvinfo,
|
|
.get_link = ethtool_op_get_link,
|
|
.get_link_ksettings = phy_ethtool_get_link_ksettings,
|
|
.set_link_ksettings = phy_ethtool_set_link_ksettings,
|
|
.nway_reset = phy_ethtool_nway_reset,
|
|
.get_ringparam = ftgmac100_get_ringparam,
|
|
.set_ringparam = ftgmac100_set_ringparam,
|
|
.get_pauseparam = ftgmac100_get_pauseparam,
|
|
.set_pauseparam = ftgmac100_set_pauseparam,
|
|
};
|
|
|
|
static irqreturn_t ftgmac100_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct net_device *netdev = dev_id;
|
|
struct ftgmac100 *priv = netdev_priv(netdev);
|
|
unsigned int status, new_mask = FTGMAC100_INT_BAD;
|
|
|
|
/* Fetch and clear interrupt bits, process abnormal ones */
|
|
status = ioread32(priv->base + FTGMAC100_OFFSET_ISR);
|
|
iowrite32(status, priv->base + FTGMAC100_OFFSET_ISR);
|
|
if (unlikely(status & FTGMAC100_INT_BAD)) {
|
|
|
|
/* RX buffer unavailable */
|
|
if (status & FTGMAC100_INT_NO_RXBUF)
|
|
netdev->stats.rx_over_errors++;
|
|
|
|
/* received packet lost due to RX FIFO full */
|
|
if (status & FTGMAC100_INT_RPKT_LOST)
|
|
netdev->stats.rx_fifo_errors++;
|
|
|
|
/* sent packet lost due to excessive TX collision */
|
|
if (status & FTGMAC100_INT_XPKT_LOST)
|
|
netdev->stats.tx_fifo_errors++;
|
|
|
|
/* AHB error -> Reset the chip */
|
|
if (status & FTGMAC100_INT_AHB_ERR) {
|
|
if (net_ratelimit())
|
|
netdev_warn(netdev,
|
|
"AHB bus error ! Resetting chip.\n");
|
|
iowrite32(0, priv->base + FTGMAC100_OFFSET_IER);
|
|
schedule_work(&priv->reset_task);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* We may need to restart the MAC after such errors, delay
|
|
* this until after we have freed some Rx buffers though
|
|
*/
|
|
priv->need_mac_restart = true;
|
|
|
|
/* Disable those errors until we restart */
|
|
new_mask &= ~status;
|
|
}
|
|
|
|
/* Only enable "bad" interrupts while NAPI is on */
|
|
iowrite32(new_mask, priv->base + FTGMAC100_OFFSET_IER);
|
|
|
|
/* Schedule NAPI bh */
|
|
napi_schedule_irqoff(&priv->napi);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static bool ftgmac100_check_rx(struct ftgmac100 *priv)
|
|
{
|
|
struct ftgmac100_rxdes *rxdes = &priv->rxdes[priv->rx_pointer];
|
|
|
|
/* Do we have a packet ? */
|
|
return !!(rxdes->rxdes0 & cpu_to_le32(FTGMAC100_RXDES0_RXPKT_RDY));
|
|
}
|
|
|
|
static int ftgmac100_poll(struct napi_struct *napi, int budget)
|
|
{
|
|
struct ftgmac100 *priv = container_of(napi, struct ftgmac100, napi);
|
|
int work_done = 0;
|
|
bool more;
|
|
|
|
/* Handle TX completions */
|
|
if (ftgmac100_tx_buf_cleanable(priv))
|
|
ftgmac100_tx_complete(priv);
|
|
|
|
/* Handle RX packets */
|
|
do {
|
|
more = ftgmac100_rx_packet(priv, &work_done);
|
|
} while (more && work_done < budget);
|
|
|
|
|
|
/* The interrupt is telling us to kick the MAC back to life
|
|
* after an RX overflow
|
|
*/
|
|
if (unlikely(priv->need_mac_restart)) {
|
|
ftgmac100_start_hw(priv);
|
|
|
|
/* Re-enable "bad" interrupts */
|
|
iowrite32(FTGMAC100_INT_BAD,
|
|
priv->base + FTGMAC100_OFFSET_IER);
|
|
}
|
|
|
|
/* As long as we are waiting for transmit packets to be
|
|
* completed we keep NAPI going
|
|
*/
|
|
if (ftgmac100_tx_buf_cleanable(priv))
|
|
work_done = budget;
|
|
|
|
if (work_done < budget) {
|
|
/* We are about to re-enable all interrupts. However
|
|
* the HW has been latching RX/TX packet interrupts while
|
|
* they were masked. So we clear them first, then we need
|
|
* to re-check if there's something to process
|
|
*/
|
|
iowrite32(FTGMAC100_INT_RXTX,
|
|
priv->base + FTGMAC100_OFFSET_ISR);
|
|
|
|
/* Push the above (and provides a barrier vs. subsequent
|
|
* reads of the descriptor).
|
|
*/
|
|
ioread32(priv->base + FTGMAC100_OFFSET_ISR);
|
|
|
|
/* Check RX and TX descriptors for more work to do */
|
|
if (ftgmac100_check_rx(priv) ||
|
|
ftgmac100_tx_buf_cleanable(priv))
|
|
return budget;
|
|
|
|
/* deschedule NAPI */
|
|
napi_complete(napi);
|
|
|
|
/* enable all interrupts */
|
|
iowrite32(FTGMAC100_INT_ALL,
|
|
priv->base + FTGMAC100_OFFSET_IER);
|
|
}
|
|
|
|
return work_done;
|
|
}
|
|
|
|
static int ftgmac100_init_all(struct ftgmac100 *priv, bool ignore_alloc_err)
|
|
{
|
|
int err = 0;
|
|
|
|
/* Re-init descriptors (adjust queue sizes) */
|
|
ftgmac100_init_rings(priv);
|
|
|
|
/* Realloc rx descriptors */
|
|
err = ftgmac100_alloc_rx_buffers(priv);
|
|
if (err && !ignore_alloc_err)
|
|
return err;
|
|
|
|
/* Reinit and restart HW */
|
|
ftgmac100_init_hw(priv);
|
|
ftgmac100_config_pause(priv);
|
|
ftgmac100_start_hw(priv);
|
|
|
|
/* Re-enable the device */
|
|
napi_enable(&priv->napi);
|
|
netif_start_queue(priv->netdev);
|
|
|
|
/* Enable all interrupts */
|
|
iowrite32(FTGMAC100_INT_ALL, priv->base + FTGMAC100_OFFSET_IER);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void ftgmac100_reset_task(struct work_struct *work)
|
|
{
|
|
struct ftgmac100 *priv = container_of(work, struct ftgmac100,
|
|
reset_task);
|
|
struct net_device *netdev = priv->netdev;
|
|
int err;
|
|
|
|
netdev_dbg(netdev, "Resetting NIC...\n");
|
|
|
|
/* Lock the world */
|
|
rtnl_lock();
|
|
if (netdev->phydev)
|
|
mutex_lock(&netdev->phydev->lock);
|
|
if (priv->mii_bus)
|
|
mutex_lock(&priv->mii_bus->mdio_lock);
|
|
|
|
|
|
/* Check if the interface is still up */
|
|
if (!netif_running(netdev))
|
|
goto bail;
|
|
|
|
/* Stop the network stack */
|
|
netif_trans_update(netdev);
|
|
napi_disable(&priv->napi);
|
|
netif_tx_disable(netdev);
|
|
|
|
/* Stop and reset the MAC */
|
|
ftgmac100_stop_hw(priv);
|
|
err = ftgmac100_reset_and_config_mac(priv);
|
|
if (err) {
|
|
/* Not much we can do ... it might come back... */
|
|
netdev_err(netdev, "attempting to continue...\n");
|
|
}
|
|
|
|
/* Free all rx and tx buffers */
|
|
ftgmac100_free_buffers(priv);
|
|
|
|
/* Setup everything again and restart chip */
|
|
ftgmac100_init_all(priv, true);
|
|
|
|
netdev_dbg(netdev, "Reset done !\n");
|
|
bail:
|
|
if (priv->mii_bus)
|
|
mutex_unlock(&priv->mii_bus->mdio_lock);
|
|
if (netdev->phydev)
|
|
mutex_unlock(&netdev->phydev->lock);
|
|
rtnl_unlock();
|
|
}
|
|
|
|
static int ftgmac100_open(struct net_device *netdev)
|
|
{
|
|
struct ftgmac100 *priv = netdev_priv(netdev);
|
|
int err;
|
|
|
|
/* Allocate ring buffers */
|
|
err = ftgmac100_alloc_rings(priv);
|
|
if (err) {
|
|
netdev_err(netdev, "Failed to allocate descriptors\n");
|
|
return err;
|
|
}
|
|
|
|
/* When using NC-SI we force the speed to 100Mbit/s full duplex,
|
|
*
|
|
* Otherwise we leave it set to 0 (no link), the link
|
|
* message from the PHY layer will handle setting it up to
|
|
* something else if needed.
|
|
*/
|
|
if (priv->use_ncsi) {
|
|
priv->cur_duplex = DUPLEX_FULL;
|
|
priv->cur_speed = SPEED_100;
|
|
} else {
|
|
priv->cur_duplex = 0;
|
|
priv->cur_speed = 0;
|
|
}
|
|
|
|
/* Reset the hardware */
|
|
err = ftgmac100_reset_and_config_mac(priv);
|
|
if (err)
|
|
goto err_hw;
|
|
|
|
/* Initialize NAPI */
|
|
netif_napi_add(netdev, &priv->napi, ftgmac100_poll, 64);
|
|
|
|
/* Grab our interrupt */
|
|
err = request_irq(netdev->irq, ftgmac100_interrupt, 0, netdev->name, netdev);
|
|
if (err) {
|
|
netdev_err(netdev, "failed to request irq %d\n", netdev->irq);
|
|
goto err_irq;
|
|
}
|
|
|
|
/* Start things up */
|
|
err = ftgmac100_init_all(priv, false);
|
|
if (err) {
|
|
netdev_err(netdev, "Failed to allocate packet buffers\n");
|
|
goto err_alloc;
|
|
}
|
|
|
|
if (netdev->phydev) {
|
|
/* If we have a PHY, start polling */
|
|
phy_start(netdev->phydev);
|
|
} else if (priv->use_ncsi) {
|
|
/* If using NC-SI, set our carrier on and start the stack */
|
|
netif_carrier_on(netdev);
|
|
|
|
/* Start the NCSI device */
|
|
err = ncsi_start_dev(priv->ndev);
|
|
if (err)
|
|
goto err_ncsi;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_ncsi:
|
|
napi_disable(&priv->napi);
|
|
netif_stop_queue(netdev);
|
|
err_alloc:
|
|
ftgmac100_free_buffers(priv);
|
|
free_irq(netdev->irq, netdev);
|
|
err_irq:
|
|
netif_napi_del(&priv->napi);
|
|
err_hw:
|
|
iowrite32(0, priv->base + FTGMAC100_OFFSET_IER);
|
|
ftgmac100_free_rings(priv);
|
|
return err;
|
|
}
|
|
|
|
static int ftgmac100_stop(struct net_device *netdev)
|
|
{
|
|
struct ftgmac100 *priv = netdev_priv(netdev);
|
|
|
|
/* Note about the reset task: We are called with the rtnl lock
|
|
* held, so we are synchronized against the core of the reset
|
|
* task. We must not try to synchronously cancel it otherwise
|
|
* we can deadlock. But since it will test for netif_running()
|
|
* which has already been cleared by the net core, we don't
|
|
* anything special to do.
|
|
*/
|
|
|
|
/* disable all interrupts */
|
|
iowrite32(0, priv->base + FTGMAC100_OFFSET_IER);
|
|
|
|
netif_stop_queue(netdev);
|
|
napi_disable(&priv->napi);
|
|
netif_napi_del(&priv->napi);
|
|
if (netdev->phydev)
|
|
phy_stop(netdev->phydev);
|
|
else if (priv->use_ncsi)
|
|
ncsi_stop_dev(priv->ndev);
|
|
|
|
ftgmac100_stop_hw(priv);
|
|
free_irq(netdev->irq, netdev);
|
|
ftgmac100_free_buffers(priv);
|
|
ftgmac100_free_rings(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* optional */
|
|
static int ftgmac100_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
|
|
{
|
|
if (!netdev->phydev)
|
|
return -ENXIO;
|
|
|
|
return phy_mii_ioctl(netdev->phydev, ifr, cmd);
|
|
}
|
|
|
|
static void ftgmac100_tx_timeout(struct net_device *netdev)
|
|
{
|
|
struct ftgmac100 *priv = netdev_priv(netdev);
|
|
|
|
/* Disable all interrupts */
|
|
iowrite32(0, priv->base + FTGMAC100_OFFSET_IER);
|
|
|
|
/* Do the reset outside of interrupt context */
|
|
schedule_work(&priv->reset_task);
|
|
}
|
|
|
|
static int ftgmac100_set_features(struct net_device *netdev,
|
|
netdev_features_t features)
|
|
{
|
|
struct ftgmac100 *priv = netdev_priv(netdev);
|
|
netdev_features_t changed = netdev->features ^ features;
|
|
|
|
if (!netif_running(netdev))
|
|
return 0;
|
|
|
|
/* Update the vlan filtering bit */
|
|
if (changed & NETIF_F_HW_VLAN_CTAG_RX) {
|
|
u32 maccr;
|
|
|
|
maccr = ioread32(priv->base + FTGMAC100_OFFSET_MACCR);
|
|
if (priv->netdev->features & NETIF_F_HW_VLAN_CTAG_RX)
|
|
maccr |= FTGMAC100_MACCR_RM_VLAN;
|
|
else
|
|
maccr &= ~FTGMAC100_MACCR_RM_VLAN;
|
|
iowrite32(maccr, priv->base + FTGMAC100_OFFSET_MACCR);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
static void ftgmac100_poll_controller(struct net_device *netdev)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
ftgmac100_interrupt(netdev->irq, netdev);
|
|
local_irq_restore(flags);
|
|
}
|
|
#endif
|
|
|
|
static const struct net_device_ops ftgmac100_netdev_ops = {
|
|
.ndo_open = ftgmac100_open,
|
|
.ndo_stop = ftgmac100_stop,
|
|
.ndo_start_xmit = ftgmac100_hard_start_xmit,
|
|
.ndo_set_mac_address = ftgmac100_set_mac_addr,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_do_ioctl = ftgmac100_do_ioctl,
|
|
.ndo_tx_timeout = ftgmac100_tx_timeout,
|
|
.ndo_set_rx_mode = ftgmac100_set_rx_mode,
|
|
.ndo_set_features = ftgmac100_set_features,
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
.ndo_poll_controller = ftgmac100_poll_controller,
|
|
#endif
|
|
.ndo_vlan_rx_add_vid = ncsi_vlan_rx_add_vid,
|
|
.ndo_vlan_rx_kill_vid = ncsi_vlan_rx_kill_vid,
|
|
};
|
|
|
|
static int ftgmac100_setup_mdio(struct net_device *netdev)
|
|
{
|
|
struct ftgmac100 *priv = netdev_priv(netdev);
|
|
struct platform_device *pdev = to_platform_device(priv->dev);
|
|
int phy_intf = PHY_INTERFACE_MODE_RGMII;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
int i, err = 0;
|
|
u32 reg;
|
|
|
|
/* initialize mdio bus */
|
|
priv->mii_bus = mdiobus_alloc();
|
|
if (!priv->mii_bus)
|
|
return -EIO;
|
|
|
|
if (priv->is_aspeed) {
|
|
/* This driver supports the old MDIO interface */
|
|
reg = ioread32(priv->base + FTGMAC100_OFFSET_REVR);
|
|
reg &= ~FTGMAC100_REVR_NEW_MDIO_INTERFACE;
|
|
iowrite32(reg, priv->base + FTGMAC100_OFFSET_REVR);
|
|
};
|
|
|
|
/* Get PHY mode from device-tree */
|
|
if (np) {
|
|
/* Default to RGMII. It's a gigabit part after all */
|
|
phy_intf = of_get_phy_mode(np);
|
|
if (phy_intf < 0)
|
|
phy_intf = PHY_INTERFACE_MODE_RGMII;
|
|
|
|
/* Aspeed only supports these. I don't know about other IP
|
|
* block vendors so I'm going to just let them through for
|
|
* now. Note that this is only a warning if for some obscure
|
|
* reason the DT really means to lie about it or it's a newer
|
|
* part we don't know about.
|
|
*
|
|
* On the Aspeed SoC there are additionally straps and SCU
|
|
* control bits that could tell us what the interface is
|
|
* (or allow us to configure it while the IP block is held
|
|
* in reset). For now I chose to keep this driver away from
|
|
* those SoC specific bits and assume the device-tree is
|
|
* right and the SCU has been configured properly by pinmux
|
|
* or the firmware.
|
|
*/
|
|
if (priv->is_aspeed &&
|
|
phy_intf != PHY_INTERFACE_MODE_RMII &&
|
|
phy_intf != PHY_INTERFACE_MODE_RGMII &&
|
|
phy_intf != PHY_INTERFACE_MODE_RGMII_ID &&
|
|
phy_intf != PHY_INTERFACE_MODE_RGMII_RXID &&
|
|
phy_intf != PHY_INTERFACE_MODE_RGMII_TXID) {
|
|
netdev_warn(netdev,
|
|
"Unsupported PHY mode %s !\n",
|
|
phy_modes(phy_intf));
|
|
}
|
|
}
|
|
|
|
priv->mii_bus->name = "ftgmac100_mdio";
|
|
snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%d",
|
|
pdev->name, pdev->id);
|
|
priv->mii_bus->parent = priv->dev;
|
|
priv->mii_bus->priv = priv->netdev;
|
|
priv->mii_bus->read = ftgmac100_mdiobus_read;
|
|
priv->mii_bus->write = ftgmac100_mdiobus_write;
|
|
|
|
for (i = 0; i < PHY_MAX_ADDR; i++)
|
|
priv->mii_bus->irq[i] = PHY_POLL;
|
|
|
|
err = mdiobus_register(priv->mii_bus);
|
|
if (err) {
|
|
dev_err(priv->dev, "Cannot register MDIO bus!\n");
|
|
goto err_register_mdiobus;
|
|
}
|
|
|
|
err = ftgmac100_mii_probe(priv, phy_intf);
|
|
if (err) {
|
|
dev_err(priv->dev, "MII Probe failed!\n");
|
|
goto err_mii_probe;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_mii_probe:
|
|
mdiobus_unregister(priv->mii_bus);
|
|
err_register_mdiobus:
|
|
mdiobus_free(priv->mii_bus);
|
|
return err;
|
|
}
|
|
|
|
static void ftgmac100_destroy_mdio(struct net_device *netdev)
|
|
{
|
|
struct ftgmac100 *priv = netdev_priv(netdev);
|
|
|
|
if (!netdev->phydev)
|
|
return;
|
|
|
|
phy_disconnect(netdev->phydev);
|
|
mdiobus_unregister(priv->mii_bus);
|
|
mdiobus_free(priv->mii_bus);
|
|
}
|
|
|
|
static void ftgmac100_ncsi_handler(struct ncsi_dev *nd)
|
|
{
|
|
if (unlikely(nd->state != ncsi_dev_state_functional))
|
|
return;
|
|
|
|
netdev_info(nd->dev, "NCSI interface %s\n",
|
|
nd->link_up ? "up" : "down");
|
|
}
|
|
|
|
static void ftgmac100_setup_clk(struct ftgmac100 *priv)
|
|
{
|
|
priv->clk = devm_clk_get(priv->dev, NULL);
|
|
if (IS_ERR(priv->clk))
|
|
return;
|
|
|
|
clk_prepare_enable(priv->clk);
|
|
|
|
/* Aspeed specifies a 100MHz clock is required for up to
|
|
* 1000Mbit link speeds. As NCSI is limited to 100Mbit, 25MHz
|
|
* is sufficient
|
|
*/
|
|
clk_set_rate(priv->clk, priv->use_ncsi ? FTGMAC_25MHZ :
|
|
FTGMAC_100MHZ);
|
|
}
|
|
|
|
static int ftgmac100_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *res;
|
|
int irq;
|
|
struct net_device *netdev;
|
|
struct ftgmac100 *priv;
|
|
struct device_node *np;
|
|
int err = 0;
|
|
|
|
if (!pdev)
|
|
return -ENODEV;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res)
|
|
return -ENXIO;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
/* setup net_device */
|
|
netdev = alloc_etherdev(sizeof(*priv));
|
|
if (!netdev) {
|
|
err = -ENOMEM;
|
|
goto err_alloc_etherdev;
|
|
}
|
|
|
|
SET_NETDEV_DEV(netdev, &pdev->dev);
|
|
|
|
netdev->ethtool_ops = &ftgmac100_ethtool_ops;
|
|
netdev->netdev_ops = &ftgmac100_netdev_ops;
|
|
netdev->watchdog_timeo = 5 * HZ;
|
|
|
|
platform_set_drvdata(pdev, netdev);
|
|
|
|
/* setup private data */
|
|
priv = netdev_priv(netdev);
|
|
priv->netdev = netdev;
|
|
priv->dev = &pdev->dev;
|
|
INIT_WORK(&priv->reset_task, ftgmac100_reset_task);
|
|
|
|
/* map io memory */
|
|
priv->res = request_mem_region(res->start, resource_size(res),
|
|
dev_name(&pdev->dev));
|
|
if (!priv->res) {
|
|
dev_err(&pdev->dev, "Could not reserve memory region\n");
|
|
err = -ENOMEM;
|
|
goto err_req_mem;
|
|
}
|
|
|
|
priv->base = ioremap(res->start, resource_size(res));
|
|
if (!priv->base) {
|
|
dev_err(&pdev->dev, "Failed to ioremap ethernet registers\n");
|
|
err = -EIO;
|
|
goto err_ioremap;
|
|
}
|
|
|
|
netdev->irq = irq;
|
|
|
|
/* Enable pause */
|
|
priv->tx_pause = true;
|
|
priv->rx_pause = true;
|
|
priv->aneg_pause = true;
|
|
|
|
/* MAC address from chip or random one */
|
|
ftgmac100_initial_mac(priv);
|
|
|
|
np = pdev->dev.of_node;
|
|
if (np && (of_device_is_compatible(np, "aspeed,ast2400-mac") ||
|
|
of_device_is_compatible(np, "aspeed,ast2500-mac"))) {
|
|
priv->rxdes0_edorr_mask = BIT(30);
|
|
priv->txdes0_edotr_mask = BIT(30);
|
|
priv->is_aspeed = true;
|
|
} else {
|
|
priv->rxdes0_edorr_mask = BIT(15);
|
|
priv->txdes0_edotr_mask = BIT(15);
|
|
}
|
|
|
|
if (np && of_get_property(np, "use-ncsi", NULL)) {
|
|
if (!IS_ENABLED(CONFIG_NET_NCSI)) {
|
|
dev_err(&pdev->dev, "NCSI stack not enabled\n");
|
|
goto err_ncsi_dev;
|
|
}
|
|
|
|
dev_info(&pdev->dev, "Using NCSI interface\n");
|
|
priv->use_ncsi = true;
|
|
priv->ndev = ncsi_register_dev(netdev, ftgmac100_ncsi_handler);
|
|
if (!priv->ndev)
|
|
goto err_ncsi_dev;
|
|
} else {
|
|
priv->use_ncsi = false;
|
|
err = ftgmac100_setup_mdio(netdev);
|
|
if (err)
|
|
goto err_setup_mdio;
|
|
}
|
|
|
|
if (priv->is_aspeed)
|
|
ftgmac100_setup_clk(priv);
|
|
|
|
/* Default ring sizes */
|
|
priv->rx_q_entries = priv->new_rx_q_entries = DEF_RX_QUEUE_ENTRIES;
|
|
priv->tx_q_entries = priv->new_tx_q_entries = DEF_TX_QUEUE_ENTRIES;
|
|
|
|
/* Base feature set */
|
|
netdev->hw_features = NETIF_F_RXCSUM | NETIF_F_HW_CSUM |
|
|
NETIF_F_GRO | NETIF_F_SG | NETIF_F_HW_VLAN_CTAG_RX |
|
|
NETIF_F_HW_VLAN_CTAG_TX;
|
|
|
|
if (priv->use_ncsi)
|
|
netdev->hw_features |= NETIF_F_HW_VLAN_CTAG_FILTER;
|
|
|
|
/* AST2400 doesn't have working HW checksum generation */
|
|
if (np && (of_device_is_compatible(np, "aspeed,ast2400-mac")))
|
|
netdev->hw_features &= ~NETIF_F_HW_CSUM;
|
|
if (np && of_get_property(np, "no-hw-checksum", NULL))
|
|
netdev->hw_features &= ~(NETIF_F_HW_CSUM | NETIF_F_RXCSUM);
|
|
netdev->features |= netdev->hw_features;
|
|
|
|
/* register network device */
|
|
err = register_netdev(netdev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Failed to register netdev\n");
|
|
goto err_register_netdev;
|
|
}
|
|
|
|
netdev_info(netdev, "irq %d, mapped at %p\n", netdev->irq, priv->base);
|
|
|
|
return 0;
|
|
|
|
err_ncsi_dev:
|
|
err_register_netdev:
|
|
ftgmac100_destroy_mdio(netdev);
|
|
err_setup_mdio:
|
|
iounmap(priv->base);
|
|
err_ioremap:
|
|
release_resource(priv->res);
|
|
err_req_mem:
|
|
free_netdev(netdev);
|
|
err_alloc_etherdev:
|
|
return err;
|
|
}
|
|
|
|
static int ftgmac100_remove(struct platform_device *pdev)
|
|
{
|
|
struct net_device *netdev;
|
|
struct ftgmac100 *priv;
|
|
|
|
netdev = platform_get_drvdata(pdev);
|
|
priv = netdev_priv(netdev);
|
|
|
|
unregister_netdev(netdev);
|
|
|
|
clk_disable_unprepare(priv->clk);
|
|
|
|
/* There's a small chance the reset task will have been re-queued,
|
|
* during stop, make sure it's gone before we free the structure.
|
|
*/
|
|
cancel_work_sync(&priv->reset_task);
|
|
|
|
ftgmac100_destroy_mdio(netdev);
|
|
|
|
iounmap(priv->base);
|
|
release_resource(priv->res);
|
|
|
|
netif_napi_del(&priv->napi);
|
|
free_netdev(netdev);
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id ftgmac100_of_match[] = {
|
|
{ .compatible = "faraday,ftgmac100" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ftgmac100_of_match);
|
|
|
|
static struct platform_driver ftgmac100_driver = {
|
|
.probe = ftgmac100_probe,
|
|
.remove = ftgmac100_remove,
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.of_match_table = ftgmac100_of_match,
|
|
},
|
|
};
|
|
module_platform_driver(ftgmac100_driver);
|
|
|
|
MODULE_AUTHOR("Po-Yu Chuang <ratbert@faraday-tech.com>");
|
|
MODULE_DESCRIPTION("FTGMAC100 driver");
|
|
MODULE_LICENSE("GPL");
|