luck/tmp_suning_uos_patched
1
0
Fork 1
Code Issues Pull Requests Packages Projects Releases Wiki Activity
86f5a4a7d7
tmp_suning_uos_patched/arch/powerpc/boot/dts/pcm030.dts
Grant Likely b884245107 powerpc/5200: Trim cruft from device trees 
Trim out obsolete/extraneous properties and tighten up some usage
conventions.  Changes include:
- removal of device_type properties
- removal of cell-index properties
- Addition of gpio-controller and #gpio-cells properties to gpio
  nodes
- Move common interrupt-parent property out of device nodes and
  into top level parent node.

This patch also include what looks to be just trivial editorial
whitespace/format changes, but there is real method in this
madness.  Editorial changes were made to keep the all the
mpc5200 board device trees as similar as possible so that diffs
between them only show the real differences between the boards.
The pcm030 device tree was most affected by this because many
of the comments had been changed from // to /* */ style and
some cell values where changed from decimal to hex format when
it was cloned from one of the other 5200 device trees.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
2009-02-03 12:30:26 -07:00

316 lines
8.0 KiB
Plaintext
Raw Blame History

/*
* phyCORE-MPC5200B-tiny (pcm030) board Device Tree Source
*
* Copyright 2006 Pengutronix
* Sascha Hauer <s.hauer@pengutronix.de>
* Copyright 2007 Pengutronix
* Juergen Beisert <j.beisert@pengutronix.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "phytec,pcm030";
compatible = "phytec,pcm030";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&mpc5200_pic>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,5200@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <0x4000>; // L1, 16K
i-cache-size = <0x4000>; // L1, 16K
timebase-frequency = <0>; // from bootloader
bus-frequency = <0>; // from bootloader
clock-frequency = <0>; // from bootloader
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x04000000>; // 64MB
};
soc5200@f0000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc5200b-immr";
ranges = <0 0xf0000000 0x0000c000>;
bus-frequency = <0>; // from bootloader
system-frequency = <0>; // from bootloader
cdm@200 {
compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
reg = <0x200 0x38>;
};
mpc5200_pic: interrupt-controller@500 {
// 5200 interrupts are encoded into two levels;
interrupt-controller;
#interrupt-cells = <3>;
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
reg = <0x500 0x80>;
};
timer@600 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x600 0x10>;
interrupts = <1 9 0>;
fsl,has-wdt;
};
timer@610 { // General Purpose Timer
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x610 0x10>;
interrupts = <1 10 0>;
};
gpt2: timer@620 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
reg = <0x620 0x10>;
interrupts = <1 11 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt3: timer@630 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
reg = <0x630 0x10>;
interrupts = <1 12 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt4: timer@640 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
reg = <0x640 0x10>;
interrupts = <1 13 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt5: timer@650 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
reg = <0x650 0x10>;
interrupts = <1 14 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt6: timer@660 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
reg = <0x660 0x10>;
interrupts = <1 15 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt7: timer@670 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
reg = <0x670 0x10>;
interrupts = <1 16 0>;
gpio-controller;
#gpio-cells = <2>;
};
rtc@800 { // Real time clock
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
reg = <0x800 0x100>;
interrupts = <1 5 0 1 6 0>;
};
can@900 {
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
interrupts = <2 17 0>;
reg = <0x900 0x80>;
};
can@980 {
compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
interrupts = <2 18 0>;
reg = <0x980 0x80>;
};
gpio_simple: gpio@b00 {
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
reg = <0xb00 0x40>;
interrupts = <1 7 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpio_wkup: gpio@c00 {
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
reg = <0xc00 0x40>;
interrupts = <1 8 0 0 3 0>;
gpio-controller;
#gpio-cells = <2>;
};
spi@f00 {
compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
reg = <0xf00 0x20>;
interrupts = <2 13 0 2 14 0>;
};
usb@1000 {
compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
reg = <0x1000 0xff>;
interrupts = <2 6 0>;
};
dma-controller@1200 {
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
reg = <0x1200 0x80>;
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
3 4 0 3 5 0 3 6 0 3 7 0
3 8 0 3 9 0 3 10 0 3 11 0
3 12 0 3 13 0 3 14 0 3 15 0>;
};
xlb@1f00 {
compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
reg = <0x1f00 0x100>;
};
ac97@2000 { /* PSC1 in ac97 mode */
compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
cell-index = <0>;
reg = <0x2000 0x100>;
interrupts = <2 1 0>;
};
/* PSC2 port is used by CAN1/2 */
serial@2400 { /* PSC3 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
cell-index = <2>;
reg = <0x2400 0x100>;
interrupts = <2 3 0>;
};
/* PSC4 is ??? */
/* PSC5 is ??? */
serial@2c00 { /* PSC6 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
cell-index = <5>;
reg = <0x2c00 0x100>;
interrupts = <2 4 0>;
};
ethernet@3000 {
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
reg = <0x3000 0x400>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
phy-handle = <&phy0>;
};
mdio@3000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
phy0: ethernet-phy@0 {
reg = <0>;
};
};
ata@3a00 {
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
reg = <0x3a00 0x100>;
interrupts = <2 7 0>;
};
i2c@3d00 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d00 0x40>;
interrupts = <2 15 0>;
fsl5200-clocking;
};
i2c@3d40 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
fsl5200-clocking;
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
/* FIXME: EEPROM */
};
sram@8000 {
compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
reg = <0x8000 0x4000>;
};
/* This is only an example device to show the usage of gpios. It maps all available
* gpios to the "gpio-provider" device.
*/
gpio {
compatible = "gpio-provider";
/* mpc52xx exp.con patchfield */
gpios = <&gpio_wkup 0 0 /* GPIO_WKUP_7 11d jp13-3 */
&gpio_wkup 1 0 /* GPIO_WKUP_6 14c */
&gpio_wkup 6 0 /* PSC2_4 43c x5-11 */
&gpio_simple 2 0 /* IRDA_1 24c x7-6 set GPS_PORT_CONFIG[IRDA] = 0 */
&gpio_simple 3 0 /* IRDA_0 x8-5 set GPS_PORT_CONFIG[IRDA] = 0 */
&gpt2 0 0 /* timer2 12d x4-4 */
&gpt3 0 0 /* timer3 13d x6-4 */
&gpt4 0 0 /* timer4 61c x2-16 */
&gpt5 0 0 /* timer5 44c x7-11 */
&gpt6 0 0 /* timer6 60c x8-15 */
&gpt7 0 0 /* timer7 36a x17-9 */
>;
};
};
pci@f0000d00 {
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
reg = <0xf0000d00 0x100>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
0xc000 0 0 2 &mpc5200_pic 1 1 3
0xc000 0 0 3 &mpc5200_pic 1 2 3
0xc000 0 0 4 &mpc5200_pic 1 3 3
0xc800 0 0 1 &mpc5200_pic 1 1 3 // 2nd slot
0xc800 0 0 2 &mpc5200_pic 1 2 3
0xc800 0 0 3 &mpc5200_pic 1 3 3
0xc800 0 0 4 &mpc5200_pic 0 0 3>;
clock-frequency = <0>; // From boot loader
interrupts = <2 8 0 2 9 0 2 10 0>;
bus-range = <0 0>;
ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
};
};
Reference in New Issue View Git Blame Copy Permalink