16c1020362
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (161 commits) ARM: pxa: fix building issue of missing physmap.h ARM: mmp: PXA910 drive strength FAST using wrong value ARM: mmp: MMP2 drive strength FAST using wrong value ARM: pxa: fix recursive calls in pxa_low_gpio_chip AT91: Support for gsia18s board AT91: Acme Systems FOX Board G20 board files AT91: board-sam9m10g45ek.c: Remove duplicate inclusion of mach/hardware.h ARM: pxa: fix suspend/resume array index miscalculation ARM: pxa: use cpu_has_ipr() consistently in irq.c ARM: pxa: remove unused variable in clock-pxa3xx.c ARM: pxa: fix warning in zeus.c ARM: sa1111: fix typo in sa1111_retrigger_lowirq() ARM mxs: clkdev related compile fixes ARM i.MX mx31_3ds: Fix MC13783 regulator names ARM: plat-stmp3xxx: irq_data conversion. ARM: plat-spear: irq_data conversion. ARM: plat-orion: irq_data conversion. ARM: plat-omap: irq_data conversion. ARM: plat-nomadik: irq_data conversion. ARM: plat-mxc: irq_data conversion. ... Fix up trivial conflict in arch/arm/plat-omap/gpio.c (Lennert Buytenhek's irq_data conversion clashing with some omap irq updates)
2138 lines
53 KiB
C
2138 lines
53 KiB
C
/*
|
|
* linux/arch/arm/plat-omap/gpio.c
|
|
*
|
|
* Support functions for OMAP GPIO
|
|
*
|
|
* Copyright (C) 2003-2005 Nokia Corporation
|
|
* Written by Juha Yrjölä <juha.yrjola@nokia.com>
|
|
*
|
|
* Copyright (C) 2009 Texas Instruments
|
|
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/sysdev.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/pm_runtime.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <asm/irq.h>
|
|
#include <mach/irqs.h>
|
|
#include <mach/gpio.h>
|
|
#include <asm/mach/irq.h>
|
|
|
|
/*
|
|
* OMAP1510 GPIO registers
|
|
*/
|
|
#define OMAP1510_GPIO_DATA_INPUT 0x00
|
|
#define OMAP1510_GPIO_DATA_OUTPUT 0x04
|
|
#define OMAP1510_GPIO_DIR_CONTROL 0x08
|
|
#define OMAP1510_GPIO_INT_CONTROL 0x0c
|
|
#define OMAP1510_GPIO_INT_MASK 0x10
|
|
#define OMAP1510_GPIO_INT_STATUS 0x14
|
|
#define OMAP1510_GPIO_PIN_CONTROL 0x18
|
|
|
|
#define OMAP1510_IH_GPIO_BASE 64
|
|
|
|
/*
|
|
* OMAP1610 specific GPIO registers
|
|
*/
|
|
#define OMAP1610_GPIO_REVISION 0x0000
|
|
#define OMAP1610_GPIO_SYSCONFIG 0x0010
|
|
#define OMAP1610_GPIO_SYSSTATUS 0x0014
|
|
#define OMAP1610_GPIO_IRQSTATUS1 0x0018
|
|
#define OMAP1610_GPIO_IRQENABLE1 0x001c
|
|
#define OMAP1610_GPIO_WAKEUPENABLE 0x0028
|
|
#define OMAP1610_GPIO_DATAIN 0x002c
|
|
#define OMAP1610_GPIO_DATAOUT 0x0030
|
|
#define OMAP1610_GPIO_DIRECTION 0x0034
|
|
#define OMAP1610_GPIO_EDGE_CTRL1 0x0038
|
|
#define OMAP1610_GPIO_EDGE_CTRL2 0x003c
|
|
#define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c
|
|
#define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8
|
|
#define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0
|
|
#define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc
|
|
#define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8
|
|
#define OMAP1610_GPIO_SET_DATAOUT 0x00f0
|
|
|
|
/*
|
|
* OMAP7XX specific GPIO registers
|
|
*/
|
|
#define OMAP7XX_GPIO_DATA_INPUT 0x00
|
|
#define OMAP7XX_GPIO_DATA_OUTPUT 0x04
|
|
#define OMAP7XX_GPIO_DIR_CONTROL 0x08
|
|
#define OMAP7XX_GPIO_INT_CONTROL 0x0c
|
|
#define OMAP7XX_GPIO_INT_MASK 0x10
|
|
#define OMAP7XX_GPIO_INT_STATUS 0x14
|
|
|
|
/*
|
|
* omap2+ specific GPIO registers
|
|
*/
|
|
#define OMAP24XX_GPIO_REVISION 0x0000
|
|
#define OMAP24XX_GPIO_IRQSTATUS1 0x0018
|
|
#define OMAP24XX_GPIO_IRQSTATUS2 0x0028
|
|
#define OMAP24XX_GPIO_IRQENABLE2 0x002c
|
|
#define OMAP24XX_GPIO_IRQENABLE1 0x001c
|
|
#define OMAP24XX_GPIO_WAKE_EN 0x0020
|
|
#define OMAP24XX_GPIO_CTRL 0x0030
|
|
#define OMAP24XX_GPIO_OE 0x0034
|
|
#define OMAP24XX_GPIO_DATAIN 0x0038
|
|
#define OMAP24XX_GPIO_DATAOUT 0x003c
|
|
#define OMAP24XX_GPIO_LEVELDETECT0 0x0040
|
|
#define OMAP24XX_GPIO_LEVELDETECT1 0x0044
|
|
#define OMAP24XX_GPIO_RISINGDETECT 0x0048
|
|
#define OMAP24XX_GPIO_FALLINGDETECT 0x004c
|
|
#define OMAP24XX_GPIO_DEBOUNCE_EN 0x0050
|
|
#define OMAP24XX_GPIO_DEBOUNCE_VAL 0x0054
|
|
#define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060
|
|
#define OMAP24XX_GPIO_SETIRQENABLE1 0x0064
|
|
#define OMAP24XX_GPIO_CLEARWKUENA 0x0080
|
|
#define OMAP24XX_GPIO_SETWKUENA 0x0084
|
|
#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090
|
|
#define OMAP24XX_GPIO_SETDATAOUT 0x0094
|
|
|
|
#define OMAP4_GPIO_REVISION 0x0000
|
|
#define OMAP4_GPIO_EOI 0x0020
|
|
#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024
|
|
#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028
|
|
#define OMAP4_GPIO_IRQSTATUS0 0x002c
|
|
#define OMAP4_GPIO_IRQSTATUS1 0x0030
|
|
#define OMAP4_GPIO_IRQSTATUSSET0 0x0034
|
|
#define OMAP4_GPIO_IRQSTATUSSET1 0x0038
|
|
#define OMAP4_GPIO_IRQSTATUSCLR0 0x003c
|
|
#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040
|
|
#define OMAP4_GPIO_IRQWAKEN0 0x0044
|
|
#define OMAP4_GPIO_IRQWAKEN1 0x0048
|
|
#define OMAP4_GPIO_IRQENABLE1 0x011c
|
|
#define OMAP4_GPIO_WAKE_EN 0x0120
|
|
#define OMAP4_GPIO_IRQSTATUS2 0x0128
|
|
#define OMAP4_GPIO_IRQENABLE2 0x012c
|
|
#define OMAP4_GPIO_CTRL 0x0130
|
|
#define OMAP4_GPIO_OE 0x0134
|
|
#define OMAP4_GPIO_DATAIN 0x0138
|
|
#define OMAP4_GPIO_DATAOUT 0x013c
|
|
#define OMAP4_GPIO_LEVELDETECT0 0x0140
|
|
#define OMAP4_GPIO_LEVELDETECT1 0x0144
|
|
#define OMAP4_GPIO_RISINGDETECT 0x0148
|
|
#define OMAP4_GPIO_FALLINGDETECT 0x014c
|
|
#define OMAP4_GPIO_DEBOUNCENABLE 0x0150
|
|
#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154
|
|
#define OMAP4_GPIO_CLEARIRQENABLE1 0x0160
|
|
#define OMAP4_GPIO_SETIRQENABLE1 0x0164
|
|
#define OMAP4_GPIO_CLEARWKUENA 0x0180
|
|
#define OMAP4_GPIO_SETWKUENA 0x0184
|
|
#define OMAP4_GPIO_CLEARDATAOUT 0x0190
|
|
#define OMAP4_GPIO_SETDATAOUT 0x0194
|
|
|
|
struct gpio_bank {
|
|
unsigned long pbase;
|
|
void __iomem *base;
|
|
u16 irq;
|
|
u16 virtual_irq_start;
|
|
int method;
|
|
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
|
|
u32 suspend_wakeup;
|
|
u32 saved_wakeup;
|
|
#endif
|
|
u32 non_wakeup_gpios;
|
|
u32 enabled_non_wakeup_gpios;
|
|
|
|
u32 saved_datain;
|
|
u32 saved_fallingdetect;
|
|
u32 saved_risingdetect;
|
|
u32 level_mask;
|
|
u32 toggle_mask;
|
|
spinlock_t lock;
|
|
struct gpio_chip chip;
|
|
struct clk *dbck;
|
|
u32 mod_usage;
|
|
u32 dbck_enable_mask;
|
|
struct device *dev;
|
|
bool dbck_flag;
|
|
int stride;
|
|
};
|
|
|
|
#ifdef CONFIG_ARCH_OMAP3
|
|
struct omap3_gpio_regs {
|
|
u32 irqenable1;
|
|
u32 irqenable2;
|
|
u32 wake_en;
|
|
u32 ctrl;
|
|
u32 oe;
|
|
u32 leveldetect0;
|
|
u32 leveldetect1;
|
|
u32 risingdetect;
|
|
u32 fallingdetect;
|
|
u32 dataout;
|
|
};
|
|
|
|
static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
|
|
#endif
|
|
|
|
/*
|
|
* TODO: Cleanup gpio_bank usage as it is having information
|
|
* related to all instances of the device
|
|
*/
|
|
static struct gpio_bank *gpio_bank;
|
|
|
|
static int bank_width;
|
|
|
|
/* TODO: Analyze removing gpio_bank_count usage from driver code */
|
|
int gpio_bank_count;
|
|
|
|
static inline struct gpio_bank *get_gpio_bank(int gpio)
|
|
{
|
|
if (cpu_is_omap15xx()) {
|
|
if (OMAP_GPIO_IS_MPUIO(gpio))
|
|
return &gpio_bank[0];
|
|
return &gpio_bank[1];
|
|
}
|
|
if (cpu_is_omap16xx()) {
|
|
if (OMAP_GPIO_IS_MPUIO(gpio))
|
|
return &gpio_bank[0];
|
|
return &gpio_bank[1 + (gpio >> 4)];
|
|
}
|
|
if (cpu_is_omap7xx()) {
|
|
if (OMAP_GPIO_IS_MPUIO(gpio))
|
|
return &gpio_bank[0];
|
|
return &gpio_bank[1 + (gpio >> 5)];
|
|
}
|
|
if (cpu_is_omap24xx())
|
|
return &gpio_bank[gpio >> 5];
|
|
if (cpu_is_omap34xx() || cpu_is_omap44xx())
|
|
return &gpio_bank[gpio >> 5];
|
|
BUG();
|
|
return NULL;
|
|
}
|
|
|
|
static inline int get_gpio_index(int gpio)
|
|
{
|
|
if (cpu_is_omap7xx())
|
|
return gpio & 0x1f;
|
|
if (cpu_is_omap24xx())
|
|
return gpio & 0x1f;
|
|
if (cpu_is_omap34xx() || cpu_is_omap44xx())
|
|
return gpio & 0x1f;
|
|
return gpio & 0x0f;
|
|
}
|
|
|
|
static inline int gpio_valid(int gpio)
|
|
{
|
|
if (gpio < 0)
|
|
return -1;
|
|
if (cpu_class_is_omap1() && OMAP_GPIO_IS_MPUIO(gpio)) {
|
|
if (gpio >= OMAP_MAX_GPIO_LINES + 16)
|
|
return -1;
|
|
return 0;
|
|
}
|
|
if (cpu_is_omap15xx() && gpio < 16)
|
|
return 0;
|
|
if ((cpu_is_omap16xx()) && gpio < 64)
|
|
return 0;
|
|
if (cpu_is_omap7xx() && gpio < 192)
|
|
return 0;
|
|
if (cpu_is_omap2420() && gpio < 128)
|
|
return 0;
|
|
if (cpu_is_omap2430() && gpio < 160)
|
|
return 0;
|
|
if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192)
|
|
return 0;
|
|
return -1;
|
|
}
|
|
|
|
static int check_gpio(int gpio)
|
|
{
|
|
if (unlikely(gpio_valid(gpio) < 0)) {
|
|
printk(KERN_ERR "omap-gpio: invalid GPIO %d\n", gpio);
|
|
dump_stack();
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
|
|
{
|
|
void __iomem *reg = bank->base;
|
|
u32 l;
|
|
|
|
switch (bank->method) {
|
|
#ifdef CONFIG_ARCH_OMAP1
|
|
case METHOD_MPUIO:
|
|
reg += OMAP_MPUIO_IO_CNTL / bank->stride;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP15XX
|
|
case METHOD_GPIO_1510:
|
|
reg += OMAP1510_GPIO_DIR_CONTROL;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP16XX
|
|
case METHOD_GPIO_1610:
|
|
reg += OMAP1610_GPIO_DIRECTION;
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
|
case METHOD_GPIO_7XX:
|
|
reg += OMAP7XX_GPIO_DIR_CONTROL;
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
|
|
case METHOD_GPIO_24XX:
|
|
reg += OMAP24XX_GPIO_OE;
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP4)
|
|
case METHOD_GPIO_44XX:
|
|
reg += OMAP4_GPIO_OE;
|
|
break;
|
|
#endif
|
|
default:
|
|
WARN_ON(1);
|
|
return;
|
|
}
|
|
l = __raw_readl(reg);
|
|
if (is_input)
|
|
l |= 1 << gpio;
|
|
else
|
|
l &= ~(1 << gpio);
|
|
__raw_writel(l, reg);
|
|
}
|
|
|
|
static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
|
|
{
|
|
void __iomem *reg = bank->base;
|
|
u32 l = 0;
|
|
|
|
switch (bank->method) {
|
|
#ifdef CONFIG_ARCH_OMAP1
|
|
case METHOD_MPUIO:
|
|
reg += OMAP_MPUIO_OUTPUT / bank->stride;
|
|
l = __raw_readl(reg);
|
|
if (enable)
|
|
l |= 1 << gpio;
|
|
else
|
|
l &= ~(1 << gpio);
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP15XX
|
|
case METHOD_GPIO_1510:
|
|
reg += OMAP1510_GPIO_DATA_OUTPUT;
|
|
l = __raw_readl(reg);
|
|
if (enable)
|
|
l |= 1 << gpio;
|
|
else
|
|
l &= ~(1 << gpio);
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP16XX
|
|
case METHOD_GPIO_1610:
|
|
if (enable)
|
|
reg += OMAP1610_GPIO_SET_DATAOUT;
|
|
else
|
|
reg += OMAP1610_GPIO_CLEAR_DATAOUT;
|
|
l = 1 << gpio;
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
|
case METHOD_GPIO_7XX:
|
|
reg += OMAP7XX_GPIO_DATA_OUTPUT;
|
|
l = __raw_readl(reg);
|
|
if (enable)
|
|
l |= 1 << gpio;
|
|
else
|
|
l &= ~(1 << gpio);
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
|
|
case METHOD_GPIO_24XX:
|
|
if (enable)
|
|
reg += OMAP24XX_GPIO_SETDATAOUT;
|
|
else
|
|
reg += OMAP24XX_GPIO_CLEARDATAOUT;
|
|
l = 1 << gpio;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP4
|
|
case METHOD_GPIO_44XX:
|
|
if (enable)
|
|
reg += OMAP4_GPIO_SETDATAOUT;
|
|
else
|
|
reg += OMAP4_GPIO_CLEARDATAOUT;
|
|
l = 1 << gpio;
|
|
break;
|
|
#endif
|
|
default:
|
|
WARN_ON(1);
|
|
return;
|
|
}
|
|
__raw_writel(l, reg);
|
|
}
|
|
|
|
static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
|
|
{
|
|
void __iomem *reg;
|
|
|
|
if (check_gpio(gpio) < 0)
|
|
return -EINVAL;
|
|
reg = bank->base;
|
|
switch (bank->method) {
|
|
#ifdef CONFIG_ARCH_OMAP1
|
|
case METHOD_MPUIO:
|
|
reg += OMAP_MPUIO_INPUT_LATCH / bank->stride;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP15XX
|
|
case METHOD_GPIO_1510:
|
|
reg += OMAP1510_GPIO_DATA_INPUT;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP16XX
|
|
case METHOD_GPIO_1610:
|
|
reg += OMAP1610_GPIO_DATAIN;
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
|
case METHOD_GPIO_7XX:
|
|
reg += OMAP7XX_GPIO_DATA_INPUT;
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
|
|
case METHOD_GPIO_24XX:
|
|
reg += OMAP24XX_GPIO_DATAIN;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP4
|
|
case METHOD_GPIO_44XX:
|
|
reg += OMAP4_GPIO_DATAIN;
|
|
break;
|
|
#endif
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
return (__raw_readl(reg)
|
|
& (1 << get_gpio_index(gpio))) != 0;
|
|
}
|
|
|
|
static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
|
|
{
|
|
void __iomem *reg;
|
|
|
|
if (check_gpio(gpio) < 0)
|
|
return -EINVAL;
|
|
reg = bank->base;
|
|
|
|
switch (bank->method) {
|
|
#ifdef CONFIG_ARCH_OMAP1
|
|
case METHOD_MPUIO:
|
|
reg += OMAP_MPUIO_OUTPUT / bank->stride;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP15XX
|
|
case METHOD_GPIO_1510:
|
|
reg += OMAP1510_GPIO_DATA_OUTPUT;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP16XX
|
|
case METHOD_GPIO_1610:
|
|
reg += OMAP1610_GPIO_DATAOUT;
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
|
case METHOD_GPIO_7XX:
|
|
reg += OMAP7XX_GPIO_DATA_OUTPUT;
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
|
|
case METHOD_GPIO_24XX:
|
|
reg += OMAP24XX_GPIO_DATAOUT;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP4
|
|
case METHOD_GPIO_44XX:
|
|
reg += OMAP4_GPIO_DATAOUT;
|
|
break;
|
|
#endif
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return (__raw_readl(reg) & (1 << get_gpio_index(gpio))) != 0;
|
|
}
|
|
|
|
#define MOD_REG_BIT(reg, bit_mask, set) \
|
|
do { \
|
|
int l = __raw_readl(base + reg); \
|
|
if (set) l |= bit_mask; \
|
|
else l &= ~bit_mask; \
|
|
__raw_writel(l, base + reg); \
|
|
} while(0)
|
|
|
|
/**
|
|
* _set_gpio_debounce - low level gpio debounce time
|
|
* @bank: the gpio bank we're acting upon
|
|
* @gpio: the gpio number on this @gpio
|
|
* @debounce: debounce time to use
|
|
*
|
|
* OMAP's debounce time is in 31us steps so we need
|
|
* to convert and round up to the closest unit.
|
|
*/
|
|
static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio,
|
|
unsigned debounce)
|
|
{
|
|
void __iomem *reg = bank->base;
|
|
u32 val;
|
|
u32 l;
|
|
|
|
if (!bank->dbck_flag)
|
|
return;
|
|
|
|
if (debounce < 32)
|
|
debounce = 0x01;
|
|
else if (debounce > 7936)
|
|
debounce = 0xff;
|
|
else
|
|
debounce = (debounce / 0x1f) - 1;
|
|
|
|
l = 1 << get_gpio_index(gpio);
|
|
|
|
if (bank->method == METHOD_GPIO_44XX)
|
|
reg += OMAP4_GPIO_DEBOUNCINGTIME;
|
|
else
|
|
reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
|
|
|
|
__raw_writel(debounce, reg);
|
|
|
|
reg = bank->base;
|
|
if (bank->method == METHOD_GPIO_44XX)
|
|
reg += OMAP4_GPIO_DEBOUNCENABLE;
|
|
else
|
|
reg += OMAP24XX_GPIO_DEBOUNCE_EN;
|
|
|
|
val = __raw_readl(reg);
|
|
|
|
if (debounce) {
|
|
val |= l;
|
|
clk_enable(bank->dbck);
|
|
} else {
|
|
val &= ~l;
|
|
clk_disable(bank->dbck);
|
|
}
|
|
bank->dbck_enable_mask = val;
|
|
|
|
__raw_writel(val, reg);
|
|
}
|
|
|
|
#ifdef CONFIG_ARCH_OMAP2PLUS
|
|
static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
|
|
int trigger)
|
|
{
|
|
void __iomem *base = bank->base;
|
|
u32 gpio_bit = 1 << gpio;
|
|
u32 val;
|
|
|
|
if (cpu_is_omap44xx()) {
|
|
MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit,
|
|
trigger & IRQ_TYPE_LEVEL_LOW);
|
|
MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit,
|
|
trigger & IRQ_TYPE_LEVEL_HIGH);
|
|
MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit,
|
|
trigger & IRQ_TYPE_EDGE_RISING);
|
|
MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit,
|
|
trigger & IRQ_TYPE_EDGE_FALLING);
|
|
} else {
|
|
MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit,
|
|
trigger & IRQ_TYPE_LEVEL_LOW);
|
|
MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit,
|
|
trigger & IRQ_TYPE_LEVEL_HIGH);
|
|
MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit,
|
|
trigger & IRQ_TYPE_EDGE_RISING);
|
|
MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit,
|
|
trigger & IRQ_TYPE_EDGE_FALLING);
|
|
}
|
|
if (likely(!(bank->non_wakeup_gpios & gpio_bit))) {
|
|
if (cpu_is_omap44xx()) {
|
|
if (trigger != 0)
|
|
__raw_writel(1 << gpio, bank->base+
|
|
OMAP4_GPIO_IRQWAKEN0);
|
|
else {
|
|
val = __raw_readl(bank->base +
|
|
OMAP4_GPIO_IRQWAKEN0);
|
|
__raw_writel(val & (~(1 << gpio)), bank->base +
|
|
OMAP4_GPIO_IRQWAKEN0);
|
|
}
|
|
} else {
|
|
/*
|
|
* GPIO wakeup request can only be generated on edge
|
|
* transitions
|
|
*/
|
|
if (trigger & IRQ_TYPE_EDGE_BOTH)
|
|
__raw_writel(1 << gpio, bank->base
|
|
+ OMAP24XX_GPIO_SETWKUENA);
|
|
else
|
|
__raw_writel(1 << gpio, bank->base
|
|
+ OMAP24XX_GPIO_CLEARWKUENA);
|
|
}
|
|
}
|
|
/* This part needs to be executed always for OMAP34xx */
|
|
if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) {
|
|
/*
|
|
* Log the edge gpio and manually trigger the IRQ
|
|
* after resume if the input level changes
|
|
* to avoid irq lost during PER RET/OFF mode
|
|
* Applies for omap2 non-wakeup gpio and all omap3 gpios
|
|
*/
|
|
if (trigger & IRQ_TYPE_EDGE_BOTH)
|
|
bank->enabled_non_wakeup_gpios |= gpio_bit;
|
|
else
|
|
bank->enabled_non_wakeup_gpios &= ~gpio_bit;
|
|
}
|
|
|
|
if (cpu_is_omap44xx()) {
|
|
bank->level_mask =
|
|
__raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) |
|
|
__raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1);
|
|
} else {
|
|
bank->level_mask =
|
|
__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) |
|
|
__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARCH_OMAP1
|
|
/*
|
|
* This only applies to chips that can't do both rising and falling edge
|
|
* detection at once. For all other chips, this function is a noop.
|
|
*/
|
|
static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
|
|
{
|
|
void __iomem *reg = bank->base;
|
|
u32 l = 0;
|
|
|
|
switch (bank->method) {
|
|
case METHOD_MPUIO:
|
|
reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride;
|
|
break;
|
|
#ifdef CONFIG_ARCH_OMAP15XX
|
|
case METHOD_GPIO_1510:
|
|
reg += OMAP1510_GPIO_INT_CONTROL;
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
|
case METHOD_GPIO_7XX:
|
|
reg += OMAP7XX_GPIO_INT_CONTROL;
|
|
break;
|
|
#endif
|
|
default:
|
|
return;
|
|
}
|
|
|
|
l = __raw_readl(reg);
|
|
if ((l >> gpio) & 1)
|
|
l &= ~(1 << gpio);
|
|
else
|
|
l |= 1 << gpio;
|
|
|
|
__raw_writel(l, reg);
|
|
}
|
|
#endif
|
|
|
|
static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
|
|
{
|
|
void __iomem *reg = bank->base;
|
|
u32 l = 0;
|
|
|
|
switch (bank->method) {
|
|
#ifdef CONFIG_ARCH_OMAP1
|
|
case METHOD_MPUIO:
|
|
reg += OMAP_MPUIO_GPIO_INT_EDGE / bank->stride;
|
|
l = __raw_readl(reg);
|
|
if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
|
|
bank->toggle_mask |= 1 << gpio;
|
|
if (trigger & IRQ_TYPE_EDGE_RISING)
|
|
l |= 1 << gpio;
|
|
else if (trigger & IRQ_TYPE_EDGE_FALLING)
|
|
l &= ~(1 << gpio);
|
|
else
|
|
goto bad;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP15XX
|
|
case METHOD_GPIO_1510:
|
|
reg += OMAP1510_GPIO_INT_CONTROL;
|
|
l = __raw_readl(reg);
|
|
if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
|
|
bank->toggle_mask |= 1 << gpio;
|
|
if (trigger & IRQ_TYPE_EDGE_RISING)
|
|
l |= 1 << gpio;
|
|
else if (trigger & IRQ_TYPE_EDGE_FALLING)
|
|
l &= ~(1 << gpio);
|
|
else
|
|
goto bad;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP16XX
|
|
case METHOD_GPIO_1610:
|
|
if (gpio & 0x08)
|
|
reg += OMAP1610_GPIO_EDGE_CTRL2;
|
|
else
|
|
reg += OMAP1610_GPIO_EDGE_CTRL1;
|
|
gpio &= 0x07;
|
|
l = __raw_readl(reg);
|
|
l &= ~(3 << (gpio << 1));
|
|
if (trigger & IRQ_TYPE_EDGE_RISING)
|
|
l |= 2 << (gpio << 1);
|
|
if (trigger & IRQ_TYPE_EDGE_FALLING)
|
|
l |= 1 << (gpio << 1);
|
|
if (trigger)
|
|
/* Enable wake-up during idle for dynamic tick */
|
|
__raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_SET_WAKEUPENA);
|
|
else
|
|
__raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA);
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
|
case METHOD_GPIO_7XX:
|
|
reg += OMAP7XX_GPIO_INT_CONTROL;
|
|
l = __raw_readl(reg);
|
|
if ((trigger & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH)
|
|
bank->toggle_mask |= 1 << gpio;
|
|
if (trigger & IRQ_TYPE_EDGE_RISING)
|
|
l |= 1 << gpio;
|
|
else if (trigger & IRQ_TYPE_EDGE_FALLING)
|
|
l &= ~(1 << gpio);
|
|
else
|
|
goto bad;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP2PLUS
|
|
case METHOD_GPIO_24XX:
|
|
case METHOD_GPIO_44XX:
|
|
set_24xx_gpio_triggering(bank, gpio, trigger);
|
|
return 0;
|
|
#endif
|
|
default:
|
|
goto bad;
|
|
}
|
|
__raw_writel(l, reg);
|
|
return 0;
|
|
bad:
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int gpio_irq_type(struct irq_data *d, unsigned type)
|
|
{
|
|
struct gpio_bank *bank;
|
|
unsigned gpio;
|
|
int retval;
|
|
unsigned long flags;
|
|
|
|
if (!cpu_class_is_omap2() && d->irq > IH_MPUIO_BASE)
|
|
gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
|
|
else
|
|
gpio = d->irq - IH_GPIO_BASE;
|
|
|
|
if (check_gpio(gpio) < 0)
|
|
return -EINVAL;
|
|
|
|
if (type & ~IRQ_TYPE_SENSE_MASK)
|
|
return -EINVAL;
|
|
|
|
/* OMAP1 allows only only edge triggering */
|
|
if (!cpu_class_is_omap2()
|
|
&& (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
|
|
return -EINVAL;
|
|
|
|
bank = irq_data_get_irq_chip_data(d);
|
|
spin_lock_irqsave(&bank->lock, flags);
|
|
retval = _set_gpio_triggering(bank, get_gpio_index(gpio), type);
|
|
if (retval == 0) {
|
|
struct irq_desc *desc = irq_to_desc(d->irq);
|
|
|
|
desc->status &= ~IRQ_TYPE_SENSE_MASK;
|
|
desc->status |= type;
|
|
}
|
|
spin_unlock_irqrestore(&bank->lock, flags);
|
|
|
|
if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
|
|
__set_irq_handler_unlocked(d->irq, handle_level_irq);
|
|
else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
|
|
__set_irq_handler_unlocked(d->irq, handle_edge_irq);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
|
|
{
|
|
void __iomem *reg = bank->base;
|
|
|
|
switch (bank->method) {
|
|
#ifdef CONFIG_ARCH_OMAP1
|
|
case METHOD_MPUIO:
|
|
/* MPUIO irqstatus is reset by reading the status register,
|
|
* so do nothing here */
|
|
return;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP15XX
|
|
case METHOD_GPIO_1510:
|
|
reg += OMAP1510_GPIO_INT_STATUS;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP16XX
|
|
case METHOD_GPIO_1610:
|
|
reg += OMAP1610_GPIO_IRQSTATUS1;
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
|
case METHOD_GPIO_7XX:
|
|
reg += OMAP7XX_GPIO_INT_STATUS;
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
|
|
case METHOD_GPIO_24XX:
|
|
reg += OMAP24XX_GPIO_IRQSTATUS1;
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP4)
|
|
case METHOD_GPIO_44XX:
|
|
reg += OMAP4_GPIO_IRQSTATUS0;
|
|
break;
|
|
#endif
|
|
default:
|
|
WARN_ON(1);
|
|
return;
|
|
}
|
|
__raw_writel(gpio_mask, reg);
|
|
|
|
/* Workaround for clearing DSP GPIO interrupts to allow retention */
|
|
if (cpu_is_omap24xx() || cpu_is_omap34xx())
|
|
reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
|
|
else if (cpu_is_omap44xx())
|
|
reg = bank->base + OMAP4_GPIO_IRQSTATUS1;
|
|
|
|
if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
|
|
__raw_writel(gpio_mask, reg);
|
|
|
|
/* Flush posted write for the irq status to avoid spurious interrupts */
|
|
__raw_readl(reg);
|
|
}
|
|
}
|
|
|
|
static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio)
|
|
{
|
|
_clear_gpio_irqbank(bank, 1 << get_gpio_index(gpio));
|
|
}
|
|
|
|
static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
|
|
{
|
|
void __iomem *reg = bank->base;
|
|
int inv = 0;
|
|
u32 l;
|
|
u32 mask;
|
|
|
|
switch (bank->method) {
|
|
#ifdef CONFIG_ARCH_OMAP1
|
|
case METHOD_MPUIO:
|
|
reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
|
|
mask = 0xffff;
|
|
inv = 1;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP15XX
|
|
case METHOD_GPIO_1510:
|
|
reg += OMAP1510_GPIO_INT_MASK;
|
|
mask = 0xffff;
|
|
inv = 1;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP16XX
|
|
case METHOD_GPIO_1610:
|
|
reg += OMAP1610_GPIO_IRQENABLE1;
|
|
mask = 0xffff;
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
|
case METHOD_GPIO_7XX:
|
|
reg += OMAP7XX_GPIO_INT_MASK;
|
|
mask = 0xffffffff;
|
|
inv = 1;
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
|
|
case METHOD_GPIO_24XX:
|
|
reg += OMAP24XX_GPIO_IRQENABLE1;
|
|
mask = 0xffffffff;
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP4)
|
|
case METHOD_GPIO_44XX:
|
|
reg += OMAP4_GPIO_IRQSTATUSSET0;
|
|
mask = 0xffffffff;
|
|
break;
|
|
#endif
|
|
default:
|
|
WARN_ON(1);
|
|
return 0;
|
|
}
|
|
|
|
l = __raw_readl(reg);
|
|
if (inv)
|
|
l = ~l;
|
|
l &= mask;
|
|
return l;
|
|
}
|
|
|
|
static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enable)
|
|
{
|
|
void __iomem *reg = bank->base;
|
|
u32 l;
|
|
|
|
switch (bank->method) {
|
|
#ifdef CONFIG_ARCH_OMAP1
|
|
case METHOD_MPUIO:
|
|
reg += OMAP_MPUIO_GPIO_MASKIT / bank->stride;
|
|
l = __raw_readl(reg);
|
|
if (enable)
|
|
l &= ~(gpio_mask);
|
|
else
|
|
l |= gpio_mask;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP15XX
|
|
case METHOD_GPIO_1510:
|
|
reg += OMAP1510_GPIO_INT_MASK;
|
|
l = __raw_readl(reg);
|
|
if (enable)
|
|
l &= ~(gpio_mask);
|
|
else
|
|
l |= gpio_mask;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP16XX
|
|
case METHOD_GPIO_1610:
|
|
if (enable)
|
|
reg += OMAP1610_GPIO_SET_IRQENABLE1;
|
|
else
|
|
reg += OMAP1610_GPIO_CLEAR_IRQENABLE1;
|
|
l = gpio_mask;
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
|
case METHOD_GPIO_7XX:
|
|
reg += OMAP7XX_GPIO_INT_MASK;
|
|
l = __raw_readl(reg);
|
|
if (enable)
|
|
l &= ~(gpio_mask);
|
|
else
|
|
l |= gpio_mask;
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
|
|
case METHOD_GPIO_24XX:
|
|
if (enable)
|
|
reg += OMAP24XX_GPIO_SETIRQENABLE1;
|
|
else
|
|
reg += OMAP24XX_GPIO_CLEARIRQENABLE1;
|
|
l = gpio_mask;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP4
|
|
case METHOD_GPIO_44XX:
|
|
if (enable)
|
|
reg += OMAP4_GPIO_IRQSTATUSSET0;
|
|
else
|
|
reg += OMAP4_GPIO_IRQSTATUSCLR0;
|
|
l = gpio_mask;
|
|
break;
|
|
#endif
|
|
default:
|
|
WARN_ON(1);
|
|
return;
|
|
}
|
|
__raw_writel(l, reg);
|
|
}
|
|
|
|
static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int enable)
|
|
{
|
|
_enable_gpio_irqbank(bank, 1 << get_gpio_index(gpio), enable);
|
|
}
|
|
|
|
/*
|
|
* Note that ENAWAKEUP needs to be enabled in GPIO_SYSCONFIG register.
|
|
* 1510 does not seem to have a wake-up register. If JTAG is connected
|
|
* to the target, system will wake up always on GPIO events. While
|
|
* system is running all registered GPIO interrupts need to have wake-up
|
|
* enabled. When system is suspended, only selected GPIO interrupts need
|
|
* to have wake-up enabled.
|
|
*/
|
|
static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
|
|
{
|
|
unsigned long uninitialized_var(flags);
|
|
|
|
switch (bank->method) {
|
|
#ifdef CONFIG_ARCH_OMAP16XX
|
|
case METHOD_MPUIO:
|
|
case METHOD_GPIO_1610:
|
|
spin_lock_irqsave(&bank->lock, flags);
|
|
if (enable)
|
|
bank->suspend_wakeup |= (1 << gpio);
|
|
else
|
|
bank->suspend_wakeup &= ~(1 << gpio);
|
|
spin_unlock_irqrestore(&bank->lock, flags);
|
|
return 0;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP2PLUS
|
|
case METHOD_GPIO_24XX:
|
|
case METHOD_GPIO_44XX:
|
|
if (bank->non_wakeup_gpios & (1 << gpio)) {
|
|
printk(KERN_ERR "Unable to modify wakeup on "
|
|
"non-wakeup GPIO%d\n",
|
|
(bank - gpio_bank) * 32 + gpio);
|
|
return -EINVAL;
|
|
}
|
|
spin_lock_irqsave(&bank->lock, flags);
|
|
if (enable)
|
|
bank->suspend_wakeup |= (1 << gpio);
|
|
else
|
|
bank->suspend_wakeup &= ~(1 << gpio);
|
|
spin_unlock_irqrestore(&bank->lock, flags);
|
|
return 0;
|
|
#endif
|
|
default:
|
|
printk(KERN_ERR "Can't enable GPIO wakeup for method %i\n",
|
|
bank->method);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static void _reset_gpio(struct gpio_bank *bank, int gpio)
|
|
{
|
|
_set_gpio_direction(bank, get_gpio_index(gpio), 1);
|
|
_set_gpio_irqenable(bank, gpio, 0);
|
|
_clear_gpio_irqstatus(bank, gpio);
|
|
_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
|
|
}
|
|
|
|
/* Use disable_irq_wake() and enable_irq_wake() functions from drivers */
|
|
static int gpio_wake_enable(struct irq_data *d, unsigned int enable)
|
|
{
|
|
unsigned int gpio = d->irq - IH_GPIO_BASE;
|
|
struct gpio_bank *bank;
|
|
int retval;
|
|
|
|
if (check_gpio(gpio) < 0)
|
|
return -ENODEV;
|
|
bank = irq_data_get_irq_chip_data(d);
|
|
retval = _set_gpio_wakeup(bank, get_gpio_index(gpio), enable);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&bank->lock, flags);
|
|
|
|
/* Set trigger to none. You need to enable the desired trigger with
|
|
* request_irq() or set_irq_type().
|
|
*/
|
|
_set_gpio_triggering(bank, offset, IRQ_TYPE_NONE);
|
|
|
|
#ifdef CONFIG_ARCH_OMAP15XX
|
|
if (bank->method == METHOD_GPIO_1510) {
|
|
void __iomem *reg;
|
|
|
|
/* Claim the pin for MPU */
|
|
reg = bank->base + OMAP1510_GPIO_PIN_CONTROL;
|
|
__raw_writel(__raw_readl(reg) | (1 << offset), reg);
|
|
}
|
|
#endif
|
|
if (!cpu_class_is_omap1()) {
|
|
if (!bank->mod_usage) {
|
|
void __iomem *reg = bank->base;
|
|
u32 ctrl;
|
|
|
|
if (cpu_is_omap24xx() || cpu_is_omap34xx())
|
|
reg += OMAP24XX_GPIO_CTRL;
|
|
else if (cpu_is_omap44xx())
|
|
reg += OMAP4_GPIO_CTRL;
|
|
ctrl = __raw_readl(reg);
|
|
/* Module is enabled, clocks are not gated */
|
|
ctrl &= 0xFFFFFFFE;
|
|
__raw_writel(ctrl, reg);
|
|
}
|
|
bank->mod_usage |= 1 << offset;
|
|
}
|
|
spin_unlock_irqrestore(&bank->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct gpio_bank *bank = container_of(chip, struct gpio_bank, chip);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&bank->lock, flags);
|
|
#ifdef CONFIG_ARCH_OMAP16XX
|
|
if (bank->method == METHOD_GPIO_1610) {
|
|
/* Disable wake-up during idle for dynamic tick */
|
|
void __iomem *reg = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
|
|
__raw_writel(1 << offset, reg);
|
|
}
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
|
|
if (bank->method == METHOD_GPIO_24XX) {
|
|
/* Disable wake-up during idle for dynamic tick */
|
|
void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
|
|
__raw_writel(1 << offset, reg);
|
|
}
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP4
|
|
if (bank->method == METHOD_GPIO_44XX) {
|
|
/* Disable wake-up during idle for dynamic tick */
|
|
void __iomem *reg = bank->base + OMAP4_GPIO_IRQWAKEN0;
|
|
__raw_writel(1 << offset, reg);
|
|
}
|
|
#endif
|
|
if (!cpu_class_is_omap1()) {
|
|
bank->mod_usage &= ~(1 << offset);
|
|
if (!bank->mod_usage) {
|
|
void __iomem *reg = bank->base;
|
|
u32 ctrl;
|
|
|
|
if (cpu_is_omap24xx() || cpu_is_omap34xx())
|
|
reg += OMAP24XX_GPIO_CTRL;
|
|
else if (cpu_is_omap44xx())
|
|
reg += OMAP4_GPIO_CTRL;
|
|
ctrl = __raw_readl(reg);
|
|
/* Module is disabled, clocks are gated */
|
|
ctrl |= 1;
|
|
__raw_writel(ctrl, reg);
|
|
}
|
|
}
|
|
_reset_gpio(bank, bank->chip.base + offset);
|
|
spin_unlock_irqrestore(&bank->lock, flags);
|
|
}
|
|
|
|
/*
|
|
* We need to unmask the GPIO bank interrupt as soon as possible to
|
|
* avoid missing GPIO interrupts for other lines in the bank.
|
|
* Then we need to mask-read-clear-unmask the triggered GPIO lines
|
|
* in the bank to avoid missing nested interrupts for a GPIO line.
|
|
* If we wait to unmask individual GPIO lines in the bank after the
|
|
* line's interrupt handler has been run, we may miss some nested
|
|
* interrupts.
|
|
*/
|
|
static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
|
|
{
|
|
void __iomem *isr_reg = NULL;
|
|
u32 isr;
|
|
unsigned int gpio_irq, gpio_index;
|
|
struct gpio_bank *bank;
|
|
u32 retrigger = 0;
|
|
int unmasked = 0;
|
|
|
|
desc->irq_data.chip->irq_ack(&desc->irq_data);
|
|
|
|
bank = get_irq_data(irq);
|
|
#ifdef CONFIG_ARCH_OMAP1
|
|
if (bank->method == METHOD_MPUIO)
|
|
isr_reg = bank->base +
|
|
OMAP_MPUIO_GPIO_INT / bank->stride;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP15XX
|
|
if (bank->method == METHOD_GPIO_1510)
|
|
isr_reg = bank->base + OMAP1510_GPIO_INT_STATUS;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP16XX)
|
|
if (bank->method == METHOD_GPIO_1610)
|
|
isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
|
|
if (bank->method == METHOD_GPIO_7XX)
|
|
isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
|
|
if (bank->method == METHOD_GPIO_24XX)
|
|
isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP4)
|
|
if (bank->method == METHOD_GPIO_44XX)
|
|
isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0;
|
|
#endif
|
|
|
|
if (WARN_ON(!isr_reg))
|
|
goto exit;
|
|
|
|
while(1) {
|
|
u32 isr_saved, level_mask = 0;
|
|
u32 enabled;
|
|
|
|
enabled = _get_gpio_irqbank_mask(bank);
|
|
isr_saved = isr = __raw_readl(isr_reg) & enabled;
|
|
|
|
if (cpu_is_omap15xx() && (bank->method == METHOD_MPUIO))
|
|
isr &= 0x0000ffff;
|
|
|
|
if (cpu_class_is_omap2()) {
|
|
level_mask = bank->level_mask & enabled;
|
|
}
|
|
|
|
/* clear edge sensitive interrupts before handler(s) are
|
|
called so that we don't miss any interrupt occurred while
|
|
executing them */
|
|
_enable_gpio_irqbank(bank, isr_saved & ~level_mask, 0);
|
|
_clear_gpio_irqbank(bank, isr_saved & ~level_mask);
|
|
_enable_gpio_irqbank(bank, isr_saved & ~level_mask, 1);
|
|
|
|
/* if there is only edge sensitive GPIO pin interrupts
|
|
configured, we could unmask GPIO bank interrupt immediately */
|
|
if (!level_mask && !unmasked) {
|
|
unmasked = 1;
|
|
desc->irq_data.chip->irq_unmask(&desc->irq_data);
|
|
}
|
|
|
|
isr |= retrigger;
|
|
retrigger = 0;
|
|
if (!isr)
|
|
break;
|
|
|
|
gpio_irq = bank->virtual_irq_start;
|
|
for (; isr != 0; isr >>= 1, gpio_irq++) {
|
|
gpio_index = get_gpio_index(irq_to_gpio(gpio_irq));
|
|
|
|
if (!(isr & 1))
|
|
continue;
|
|
|
|
#ifdef CONFIG_ARCH_OMAP1
|
|
/*
|
|
* Some chips can't respond to both rising and falling
|
|
* at the same time. If this irq was requested with
|
|
* both flags, we need to flip the ICR data for the IRQ
|
|
* to respond to the IRQ for the opposite direction.
|
|
* This will be indicated in the bank toggle_mask.
|
|
*/
|
|
if (bank->toggle_mask & (1 << gpio_index))
|
|
_toggle_gpio_edge_triggering(bank, gpio_index);
|
|
#endif
|
|
|
|
generic_handle_irq(gpio_irq);
|
|
}
|
|
}
|
|
/* if bank has any level sensitive GPIO pin interrupt
|
|
configured, we must unmask the bank interrupt only after
|
|
handler(s) are executed in order to avoid spurious bank
|
|
interrupt */
|
|
exit:
|
|
if (!unmasked)
|
|
desc->irq_data.chip->irq_unmask(&desc->irq_data);
|
|
}
|
|
|
|
static void gpio_irq_shutdown(struct irq_data *d)
|
|
{
|
|
unsigned int gpio = d->irq - IH_GPIO_BASE;
|
|
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
|
|
|
|
_reset_gpio(bank, gpio);
|
|
}
|
|
|
|
static void gpio_ack_irq(struct irq_data *d)
|
|
{
|
|
unsigned int gpio = d->irq - IH_GPIO_BASE;
|
|
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
|
|
|
|
_clear_gpio_irqstatus(bank, gpio);
|
|
}
|
|
|
|
static void gpio_mask_irq(struct irq_data *d)
|
|
{
|
|
unsigned int gpio = d->irq - IH_GPIO_BASE;
|
|
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
|
|
|
|
_set_gpio_irqenable(bank, gpio, 0);
|
|
_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
|
|
}
|
|
|
|
static void gpio_unmask_irq(struct irq_data *d)
|
|
{
|
|
unsigned int gpio = d->irq - IH_GPIO_BASE;
|
|
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
|
|
unsigned int irq_mask = 1 << get_gpio_index(gpio);
|
|
struct irq_desc *desc = irq_to_desc(d->irq);
|
|
u32 trigger = desc->status & IRQ_TYPE_SENSE_MASK;
|
|
|
|
if (trigger)
|
|
_set_gpio_triggering(bank, get_gpio_index(gpio), trigger);
|
|
|
|
/* For level-triggered GPIOs, the clearing must be done after
|
|
* the HW source is cleared, thus after the handler has run */
|
|
if (bank->level_mask & irq_mask) {
|
|
_set_gpio_irqenable(bank, gpio, 0);
|
|
_clear_gpio_irqstatus(bank, gpio);
|
|
}
|
|
|
|
_set_gpio_irqenable(bank, gpio, 1);
|
|
}
|
|
|
|
static struct irq_chip gpio_irq_chip = {
|
|
.name = "GPIO",
|
|
.irq_shutdown = gpio_irq_shutdown,
|
|
.irq_ack = gpio_ack_irq,
|
|
.irq_mask = gpio_mask_irq,
|
|
.irq_unmask = gpio_unmask_irq,
|
|
.irq_set_type = gpio_irq_type,
|
|
.irq_set_wake = gpio_wake_enable,
|
|
};
|
|
|
|
/*---------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_ARCH_OMAP1
|
|
|
|
/* MPUIO uses the always-on 32k clock */
|
|
|
|
static void mpuio_ack_irq(struct irq_data *d)
|
|
{
|
|
/* The ISR is reset automatically, so do nothing here. */
|
|
}
|
|
|
|
static void mpuio_mask_irq(struct irq_data *d)
|
|
{
|
|
unsigned int gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
|
|
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
|
|
|
|
_set_gpio_irqenable(bank, gpio, 0);
|
|
}
|
|
|
|
static void mpuio_unmask_irq(struct irq_data *d)
|
|
{
|
|
unsigned int gpio = OMAP_MPUIO(d->irq - IH_MPUIO_BASE);
|
|
struct gpio_bank *bank = irq_data_get_irq_chip_data(d);
|
|
|
|
_set_gpio_irqenable(bank, gpio, 1);
|
|
}
|
|
|
|
static struct irq_chip mpuio_irq_chip = {
|
|
.name = "MPUIO",
|
|
.irq_ack = mpuio_ack_irq,
|
|
.irq_mask = mpuio_mask_irq,
|
|
.irq_unmask = mpuio_unmask_irq,
|
|
.irq_set_type = gpio_irq_type,
|
|
#ifdef CONFIG_ARCH_OMAP16XX
|
|
/* REVISIT: assuming only 16xx supports MPUIO wake events */
|
|
.irq_set_wake = gpio_wake_enable,
|
|
#endif
|
|
};
|
|
|
|
|
|
#define bank_is_mpuio(bank) ((bank)->method == METHOD_MPUIO)
|
|
|
|
|
|
#ifdef CONFIG_ARCH_OMAP16XX
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
static int omap_mpuio_suspend_noirq(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct gpio_bank *bank = platform_get_drvdata(pdev);
|
|
void __iomem *mask_reg = bank->base +
|
|
OMAP_MPUIO_GPIO_MASKIT / bank->stride;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&bank->lock, flags);
|
|
bank->saved_wakeup = __raw_readl(mask_reg);
|
|
__raw_writel(0xffff & ~bank->suspend_wakeup, mask_reg);
|
|
spin_unlock_irqrestore(&bank->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_mpuio_resume_noirq(struct device *dev)
|
|
{
|
|
struct platform_device *pdev = to_platform_device(dev);
|
|
struct gpio_bank *bank = platform_get_drvdata(pdev);
|
|
void __iomem *mask_reg = bank->base +
|
|
OMAP_MPUIO_GPIO_MASKIT / bank->stride;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&bank->lock, flags);
|
|
__raw_writel(bank->saved_wakeup, mask_reg);
|
|
spin_unlock_irqrestore(&bank->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops omap_mpuio_dev_pm_ops = {
|
|
.suspend_noirq = omap_mpuio_suspend_noirq,
|
|
.resume_noirq = omap_mpuio_resume_noirq,
|
|
};
|
|
|
|
/* use platform_driver for this, now that there's no longer any
|
|
* point to sys_device (other than not disturbing old code).
|
|
*/
|
|
static struct platform_driver omap_mpuio_driver = {
|
|
.driver = {
|
|
.name = "mpuio",
|
|
.pm = &omap_mpuio_dev_pm_ops,
|
|
},
|
|
};
|
|
|
|
static struct platform_device omap_mpuio_device = {
|
|
.name = "mpuio",
|
|
.id = -1,
|
|
.dev = {
|
|
.driver = &omap_mpuio_driver.driver,
|
|
}
|
|
/* could list the /proc/iomem resources */
|
|
};
|
|
|
|
static inline void mpuio_init(void)
|
|
{
|
|
struct gpio_bank *bank = get_gpio_bank(OMAP_MPUIO(0));
|
|
platform_set_drvdata(&omap_mpuio_device, bank);
|
|
|
|
if (platform_driver_register(&omap_mpuio_driver) == 0)
|
|
(void) platform_device_register(&omap_mpuio_device);
|
|
}
|
|
|
|
#else
|
|
static inline void mpuio_init(void) {}
|
|
#endif /* 16xx */
|
|
|
|
#else
|
|
|
|
extern struct irq_chip mpuio_irq_chip;
|
|
|
|
#define bank_is_mpuio(bank) 0
|
|
static inline void mpuio_init(void) {}
|
|
|
|
#endif
|
|
|
|
/*---------------------------------------------------------------------*/
|
|
|
|
/* REVISIT these are stupid implementations! replace by ones that
|
|
* don't switch on METHOD_* and which mostly avoid spinlocks
|
|
*/
|
|
|
|
static int gpio_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct gpio_bank *bank;
|
|
unsigned long flags;
|
|
|
|
bank = container_of(chip, struct gpio_bank, chip);
|
|
spin_lock_irqsave(&bank->lock, flags);
|
|
_set_gpio_direction(bank, offset, 1);
|
|
spin_unlock_irqrestore(&bank->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static int gpio_is_input(struct gpio_bank *bank, int mask)
|
|
{
|
|
void __iomem *reg = bank->base;
|
|
|
|
switch (bank->method) {
|
|
case METHOD_MPUIO:
|
|
reg += OMAP_MPUIO_IO_CNTL / bank->stride;
|
|
break;
|
|
case METHOD_GPIO_1510:
|
|
reg += OMAP1510_GPIO_DIR_CONTROL;
|
|
break;
|
|
case METHOD_GPIO_1610:
|
|
reg += OMAP1610_GPIO_DIRECTION;
|
|
break;
|
|
case METHOD_GPIO_7XX:
|
|
reg += OMAP7XX_GPIO_DIR_CONTROL;
|
|
break;
|
|
case METHOD_GPIO_24XX:
|
|
reg += OMAP24XX_GPIO_OE;
|
|
break;
|
|
case METHOD_GPIO_44XX:
|
|
reg += OMAP4_GPIO_OE;
|
|
break;
|
|
default:
|
|
WARN_ONCE(1, "gpio_is_input: incorrect OMAP GPIO method");
|
|
return -EINVAL;
|
|
}
|
|
return __raw_readl(reg) & mask;
|
|
}
|
|
|
|
static int gpio_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct gpio_bank *bank;
|
|
void __iomem *reg;
|
|
int gpio;
|
|
u32 mask;
|
|
|
|
gpio = chip->base + offset;
|
|
bank = get_gpio_bank(gpio);
|
|
reg = bank->base;
|
|
mask = 1 << get_gpio_index(gpio);
|
|
|
|
if (gpio_is_input(bank, mask))
|
|
return _get_gpio_datain(bank, gpio);
|
|
else
|
|
return _get_gpio_dataout(bank, gpio);
|
|
}
|
|
|
|
static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct gpio_bank *bank;
|
|
unsigned long flags;
|
|
|
|
bank = container_of(chip, struct gpio_bank, chip);
|
|
spin_lock_irqsave(&bank->lock, flags);
|
|
_set_gpio_dataout(bank, offset, value);
|
|
_set_gpio_direction(bank, offset, 0);
|
|
spin_unlock_irqrestore(&bank->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static int gpio_debounce(struct gpio_chip *chip, unsigned offset,
|
|
unsigned debounce)
|
|
{
|
|
struct gpio_bank *bank;
|
|
unsigned long flags;
|
|
|
|
bank = container_of(chip, struct gpio_bank, chip);
|
|
|
|
if (!bank->dbck) {
|
|
bank->dbck = clk_get(bank->dev, "dbclk");
|
|
if (IS_ERR(bank->dbck))
|
|
dev_err(bank->dev, "Could not get gpio dbck\n");
|
|
}
|
|
|
|
spin_lock_irqsave(&bank->lock, flags);
|
|
_set_gpio_debounce(bank, offset, debounce);
|
|
spin_unlock_irqrestore(&bank->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
struct gpio_bank *bank;
|
|
unsigned long flags;
|
|
|
|
bank = container_of(chip, struct gpio_bank, chip);
|
|
spin_lock_irqsave(&bank->lock, flags);
|
|
_set_gpio_dataout(bank, offset, value);
|
|
spin_unlock_irqrestore(&bank->lock, flags);
|
|
}
|
|
|
|
static int gpio_2irq(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct gpio_bank *bank;
|
|
|
|
bank = container_of(chip, struct gpio_bank, chip);
|
|
return bank->virtual_irq_start + offset;
|
|
}
|
|
|
|
/*---------------------------------------------------------------------*/
|
|
|
|
static void __init omap_gpio_show_rev(struct gpio_bank *bank)
|
|
{
|
|
u32 rev;
|
|
|
|
if (cpu_is_omap16xx() && !(bank->method != METHOD_MPUIO))
|
|
rev = __raw_readw(bank->base + OMAP1610_GPIO_REVISION);
|
|
else if (cpu_is_omap24xx() || cpu_is_omap34xx())
|
|
rev = __raw_readl(bank->base + OMAP24XX_GPIO_REVISION);
|
|
else if (cpu_is_omap44xx())
|
|
rev = __raw_readl(bank->base + OMAP4_GPIO_REVISION);
|
|
else
|
|
return;
|
|
|
|
printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
|
|
(rev >> 4) & 0x0f, rev & 0x0f);
|
|
}
|
|
|
|
/* This lock class tells lockdep that GPIO irqs are in a different
|
|
* category than their parents, so it won't report false recursion.
|
|
*/
|
|
static struct lock_class_key gpio_lock_class;
|
|
|
|
static inline int init_gpio_info(struct platform_device *pdev)
|
|
{
|
|
/* TODO: Analyze removing gpio_bank_count usage from driver code */
|
|
gpio_bank = kzalloc(gpio_bank_count * sizeof(struct gpio_bank),
|
|
GFP_KERNEL);
|
|
if (!gpio_bank) {
|
|
dev_err(&pdev->dev, "Memory alloc failed for gpio_bank\n");
|
|
return -ENOMEM;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* TODO: Cleanup cpu_is_* checks */
|
|
static void omap_gpio_mod_init(struct gpio_bank *bank, int id)
|
|
{
|
|
if (cpu_class_is_omap2()) {
|
|
if (cpu_is_omap44xx()) {
|
|
__raw_writel(0xffffffff, bank->base +
|
|
OMAP4_GPIO_IRQSTATUSCLR0);
|
|
__raw_writel(0x00000000, bank->base +
|
|
OMAP4_GPIO_DEBOUNCENABLE);
|
|
/* Initialize interface clk ungated, module enabled */
|
|
__raw_writel(0, bank->base + OMAP4_GPIO_CTRL);
|
|
} else if (cpu_is_omap34xx()) {
|
|
__raw_writel(0x00000000, bank->base +
|
|
OMAP24XX_GPIO_IRQENABLE1);
|
|
__raw_writel(0xffffffff, bank->base +
|
|
OMAP24XX_GPIO_IRQSTATUS1);
|
|
__raw_writel(0x00000000, bank->base +
|
|
OMAP24XX_GPIO_DEBOUNCE_EN);
|
|
|
|
/* Initialize interface clk ungated, module enabled */
|
|
__raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL);
|
|
} else if (cpu_is_omap24xx()) {
|
|
static const u32 non_wakeup_gpios[] = {
|
|
0xe203ffc0, 0x08700040
|
|
};
|
|
if (id < ARRAY_SIZE(non_wakeup_gpios))
|
|
bank->non_wakeup_gpios = non_wakeup_gpios[id];
|
|
}
|
|
} else if (cpu_class_is_omap1()) {
|
|
if (bank_is_mpuio(bank))
|
|
__raw_writew(0xffff, bank->base +
|
|
OMAP_MPUIO_GPIO_MASKIT / bank->stride);
|
|
if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
|
|
__raw_writew(0xffff, bank->base
|
|
+ OMAP1510_GPIO_INT_MASK);
|
|
__raw_writew(0x0000, bank->base
|
|
+ OMAP1510_GPIO_INT_STATUS);
|
|
}
|
|
if (cpu_is_omap16xx() && bank->method == METHOD_GPIO_1610) {
|
|
__raw_writew(0x0000, bank->base
|
|
+ OMAP1610_GPIO_IRQENABLE1);
|
|
__raw_writew(0xffff, bank->base
|
|
+ OMAP1610_GPIO_IRQSTATUS1);
|
|
__raw_writew(0x0014, bank->base
|
|
+ OMAP1610_GPIO_SYSCONFIG);
|
|
|
|
/*
|
|
* Enable system clock for GPIO module.
|
|
* The CAM_CLK_CTRL *is* really the right place.
|
|
*/
|
|
omap_writel(omap_readl(ULPD_CAM_CLK_CTRL) | 0x04,
|
|
ULPD_CAM_CLK_CTRL);
|
|
}
|
|
if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) {
|
|
__raw_writel(0xffffffff, bank->base
|
|
+ OMAP7XX_GPIO_INT_MASK);
|
|
__raw_writel(0x00000000, bank->base
|
|
+ OMAP7XX_GPIO_INT_STATUS);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void __init omap_gpio_chip_init(struct gpio_bank *bank)
|
|
{
|
|
int j;
|
|
static int gpio;
|
|
|
|
bank->mod_usage = 0;
|
|
/*
|
|
* REVISIT eventually switch from OMAP-specific gpio structs
|
|
* over to the generic ones
|
|
*/
|
|
bank->chip.request = omap_gpio_request;
|
|
bank->chip.free = omap_gpio_free;
|
|
bank->chip.direction_input = gpio_input;
|
|
bank->chip.get = gpio_get;
|
|
bank->chip.direction_output = gpio_output;
|
|
bank->chip.set_debounce = gpio_debounce;
|
|
bank->chip.set = gpio_set;
|
|
bank->chip.to_irq = gpio_2irq;
|
|
if (bank_is_mpuio(bank)) {
|
|
bank->chip.label = "mpuio";
|
|
#ifdef CONFIG_ARCH_OMAP16XX
|
|
bank->chip.dev = &omap_mpuio_device.dev;
|
|
#endif
|
|
bank->chip.base = OMAP_MPUIO(0);
|
|
} else {
|
|
bank->chip.label = "gpio";
|
|
bank->chip.base = gpio;
|
|
gpio += bank_width;
|
|
}
|
|
bank->chip.ngpio = bank_width;
|
|
|
|
gpiochip_add(&bank->chip);
|
|
|
|
for (j = bank->virtual_irq_start;
|
|
j < bank->virtual_irq_start + bank_width; j++) {
|
|
struct irq_desc *d = irq_to_desc(j);
|
|
|
|
lockdep_set_class(&d->lock, &gpio_lock_class);
|
|
set_irq_chip_data(j, bank);
|
|
if (bank_is_mpuio(bank))
|
|
set_irq_chip(j, &mpuio_irq_chip);
|
|
else
|
|
set_irq_chip(j, &gpio_irq_chip);
|
|
set_irq_handler(j, handle_simple_irq);
|
|
set_irq_flags(j, IRQF_VALID);
|
|
}
|
|
set_irq_chained_handler(bank->irq, gpio_irq_handler);
|
|
set_irq_data(bank->irq, bank);
|
|
}
|
|
|
|
static int __devinit omap_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
static int gpio_init_done;
|
|
struct omap_gpio_platform_data *pdata;
|
|
struct resource *res;
|
|
int id;
|
|
struct gpio_bank *bank;
|
|
|
|
if (!pdev->dev.platform_data)
|
|
return -EINVAL;
|
|
|
|
pdata = pdev->dev.platform_data;
|
|
|
|
if (!gpio_init_done) {
|
|
int ret;
|
|
|
|
ret = init_gpio_info(pdev);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
id = pdev->id;
|
|
bank = &gpio_bank[id];
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
if (unlikely(!res)) {
|
|
dev_err(&pdev->dev, "GPIO Bank %i Invalid IRQ resource\n", id);
|
|
return -ENODEV;
|
|
}
|
|
|
|
bank->irq = res->start;
|
|
bank->virtual_irq_start = pdata->virtual_irq_start;
|
|
bank->method = pdata->bank_type;
|
|
bank->dev = &pdev->dev;
|
|
bank->dbck_flag = pdata->dbck_flag;
|
|
bank->stride = pdata->bank_stride;
|
|
bank_width = pdata->bank_width;
|
|
|
|
spin_lock_init(&bank->lock);
|
|
|
|
/* Static mapping, never released */
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (unlikely(!res)) {
|
|
dev_err(&pdev->dev, "GPIO Bank %i Invalid mem resource\n", id);
|
|
return -ENODEV;
|
|
}
|
|
|
|
bank->base = ioremap(res->start, resource_size(res));
|
|
if (!bank->base) {
|
|
dev_err(&pdev->dev, "Could not ioremap gpio bank%i\n", id);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
pm_runtime_enable(bank->dev);
|
|
pm_runtime_get_sync(bank->dev);
|
|
|
|
omap_gpio_mod_init(bank, id);
|
|
omap_gpio_chip_init(bank);
|
|
omap_gpio_show_rev(bank);
|
|
|
|
if (!gpio_init_done)
|
|
gpio_init_done = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
|
|
static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
|
|
{
|
|
int i;
|
|
|
|
if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
|
|
return 0;
|
|
|
|
for (i = 0; i < gpio_bank_count; i++) {
|
|
struct gpio_bank *bank = &gpio_bank[i];
|
|
void __iomem *wake_status;
|
|
void __iomem *wake_clear;
|
|
void __iomem *wake_set;
|
|
unsigned long flags;
|
|
|
|
switch (bank->method) {
|
|
#ifdef CONFIG_ARCH_OMAP16XX
|
|
case METHOD_GPIO_1610:
|
|
wake_status = bank->base + OMAP1610_GPIO_WAKEUPENABLE;
|
|
wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
|
|
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
|
|
case METHOD_GPIO_24XX:
|
|
wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
|
|
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
|
|
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP4
|
|
case METHOD_GPIO_44XX:
|
|
wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0;
|
|
wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
|
|
wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
|
|
break;
|
|
#endif
|
|
default:
|
|
continue;
|
|
}
|
|
|
|
spin_lock_irqsave(&bank->lock, flags);
|
|
bank->saved_wakeup = __raw_readl(wake_status);
|
|
__raw_writel(0xffffffff, wake_clear);
|
|
__raw_writel(bank->suspend_wakeup, wake_set);
|
|
spin_unlock_irqrestore(&bank->lock, flags);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap_gpio_resume(struct sys_device *dev)
|
|
{
|
|
int i;
|
|
|
|
if (!cpu_class_is_omap2() && !cpu_is_omap16xx())
|
|
return 0;
|
|
|
|
for (i = 0; i < gpio_bank_count; i++) {
|
|
struct gpio_bank *bank = &gpio_bank[i];
|
|
void __iomem *wake_clear;
|
|
void __iomem *wake_set;
|
|
unsigned long flags;
|
|
|
|
switch (bank->method) {
|
|
#ifdef CONFIG_ARCH_OMAP16XX
|
|
case METHOD_GPIO_1610:
|
|
wake_clear = bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA;
|
|
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
|
|
break;
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
|
|
case METHOD_GPIO_24XX:
|
|
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
|
|
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
|
|
break;
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP4
|
|
case METHOD_GPIO_44XX:
|
|
wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0;
|
|
wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0;
|
|
break;
|
|
#endif
|
|
default:
|
|
continue;
|
|
}
|
|
|
|
spin_lock_irqsave(&bank->lock, flags);
|
|
__raw_writel(0xffffffff, wake_clear);
|
|
__raw_writel(bank->saved_wakeup, wake_set);
|
|
spin_unlock_irqrestore(&bank->lock, flags);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct sysdev_class omap_gpio_sysclass = {
|
|
.name = "gpio",
|
|
.suspend = omap_gpio_suspend,
|
|
.resume = omap_gpio_resume,
|
|
};
|
|
|
|
static struct sys_device omap_gpio_device = {
|
|
.id = 0,
|
|
.cls = &omap_gpio_sysclass,
|
|
};
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARCH_OMAP2PLUS
|
|
|
|
static int workaround_enabled;
|
|
|
|
void omap2_gpio_prepare_for_idle(int off_mode)
|
|
{
|
|
int i, c = 0;
|
|
int min = 0;
|
|
|
|
if (cpu_is_omap34xx())
|
|
min = 1;
|
|
|
|
for (i = min; i < gpio_bank_count; i++) {
|
|
struct gpio_bank *bank = &gpio_bank[i];
|
|
u32 l1 = 0, l2 = 0;
|
|
int j;
|
|
|
|
for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
|
|
clk_disable(bank->dbck);
|
|
|
|
if (!off_mode)
|
|
continue;
|
|
|
|
/* If going to OFF, remove triggering for all
|
|
* non-wakeup GPIOs. Otherwise spurious IRQs will be
|
|
* generated. See OMAP2420 Errata item 1.101. */
|
|
if (!(bank->enabled_non_wakeup_gpios))
|
|
continue;
|
|
|
|
if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
|
|
bank->saved_datain = __raw_readl(bank->base +
|
|
OMAP24XX_GPIO_DATAIN);
|
|
l1 = __raw_readl(bank->base +
|
|
OMAP24XX_GPIO_FALLINGDETECT);
|
|
l2 = __raw_readl(bank->base +
|
|
OMAP24XX_GPIO_RISINGDETECT);
|
|
}
|
|
|
|
if (cpu_is_omap44xx()) {
|
|
bank->saved_datain = __raw_readl(bank->base +
|
|
OMAP4_GPIO_DATAIN);
|
|
l1 = __raw_readl(bank->base +
|
|
OMAP4_GPIO_FALLINGDETECT);
|
|
l2 = __raw_readl(bank->base +
|
|
OMAP4_GPIO_RISINGDETECT);
|
|
}
|
|
|
|
bank->saved_fallingdetect = l1;
|
|
bank->saved_risingdetect = l2;
|
|
l1 &= ~bank->enabled_non_wakeup_gpios;
|
|
l2 &= ~bank->enabled_non_wakeup_gpios;
|
|
|
|
if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
|
|
__raw_writel(l1, bank->base +
|
|
OMAP24XX_GPIO_FALLINGDETECT);
|
|
__raw_writel(l2, bank->base +
|
|
OMAP24XX_GPIO_RISINGDETECT);
|
|
}
|
|
|
|
if (cpu_is_omap44xx()) {
|
|
__raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT);
|
|
__raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT);
|
|
}
|
|
|
|
c++;
|
|
}
|
|
if (!c) {
|
|
workaround_enabled = 0;
|
|
return;
|
|
}
|
|
workaround_enabled = 1;
|
|
}
|
|
|
|
void omap2_gpio_resume_after_idle(void)
|
|
{
|
|
int i;
|
|
int min = 0;
|
|
|
|
if (cpu_is_omap34xx())
|
|
min = 1;
|
|
for (i = min; i < gpio_bank_count; i++) {
|
|
struct gpio_bank *bank = &gpio_bank[i];
|
|
u32 l = 0, gen, gen0, gen1;
|
|
int j;
|
|
|
|
for (j = 0; j < hweight_long(bank->dbck_enable_mask); j++)
|
|
clk_enable(bank->dbck);
|
|
|
|
if (!workaround_enabled)
|
|
continue;
|
|
|
|
if (!(bank->enabled_non_wakeup_gpios))
|
|
continue;
|
|
|
|
if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
|
|
__raw_writel(bank->saved_fallingdetect,
|
|
bank->base + OMAP24XX_GPIO_FALLINGDETECT);
|
|
__raw_writel(bank->saved_risingdetect,
|
|
bank->base + OMAP24XX_GPIO_RISINGDETECT);
|
|
l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
|
|
}
|
|
|
|
if (cpu_is_omap44xx()) {
|
|
__raw_writel(bank->saved_fallingdetect,
|
|
bank->base + OMAP4_GPIO_FALLINGDETECT);
|
|
__raw_writel(bank->saved_risingdetect,
|
|
bank->base + OMAP4_GPIO_RISINGDETECT);
|
|
l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN);
|
|
}
|
|
|
|
/* Check if any of the non-wakeup interrupt GPIOs have changed
|
|
* state. If so, generate an IRQ by software. This is
|
|
* horribly racy, but it's the best we can do to work around
|
|
* this silicon bug. */
|
|
l ^= bank->saved_datain;
|
|
l &= bank->enabled_non_wakeup_gpios;
|
|
|
|
/*
|
|
* No need to generate IRQs for the rising edge for gpio IRQs
|
|
* configured with falling edge only; and vice versa.
|
|
*/
|
|
gen0 = l & bank->saved_fallingdetect;
|
|
gen0 &= bank->saved_datain;
|
|
|
|
gen1 = l & bank->saved_risingdetect;
|
|
gen1 &= ~(bank->saved_datain);
|
|
|
|
/* FIXME: Consider GPIO IRQs with level detections properly! */
|
|
gen = l & (~(bank->saved_fallingdetect) &
|
|
~(bank->saved_risingdetect));
|
|
/* Consider all GPIO IRQs needed to be updated */
|
|
gen |= gen0 | gen1;
|
|
|
|
if (gen) {
|
|
u32 old0, old1;
|
|
|
|
if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
|
|
old0 = __raw_readl(bank->base +
|
|
OMAP24XX_GPIO_LEVELDETECT0);
|
|
old1 = __raw_readl(bank->base +
|
|
OMAP24XX_GPIO_LEVELDETECT1);
|
|
__raw_writel(old0 | gen, bank->base +
|
|
OMAP24XX_GPIO_LEVELDETECT0);
|
|
__raw_writel(old1 | gen, bank->base +
|
|
OMAP24XX_GPIO_LEVELDETECT1);
|
|
__raw_writel(old0, bank->base +
|
|
OMAP24XX_GPIO_LEVELDETECT0);
|
|
__raw_writel(old1, bank->base +
|
|
OMAP24XX_GPIO_LEVELDETECT1);
|
|
}
|
|
|
|
if (cpu_is_omap44xx()) {
|
|
old0 = __raw_readl(bank->base +
|
|
OMAP4_GPIO_LEVELDETECT0);
|
|
old1 = __raw_readl(bank->base +
|
|
OMAP4_GPIO_LEVELDETECT1);
|
|
__raw_writel(old0 | l, bank->base +
|
|
OMAP4_GPIO_LEVELDETECT0);
|
|
__raw_writel(old1 | l, bank->base +
|
|
OMAP4_GPIO_LEVELDETECT1);
|
|
__raw_writel(old0, bank->base +
|
|
OMAP4_GPIO_LEVELDETECT0);
|
|
__raw_writel(old1, bank->base +
|
|
OMAP4_GPIO_LEVELDETECT1);
|
|
}
|
|
}
|
|
}
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARCH_OMAP3
|
|
/* save the registers of bank 2-6 */
|
|
void omap_gpio_save_context(void)
|
|
{
|
|
int i;
|
|
|
|
/* saving banks from 2-6 only since GPIO1 is in WKUP */
|
|
for (i = 1; i < gpio_bank_count; i++) {
|
|
struct gpio_bank *bank = &gpio_bank[i];
|
|
gpio_context[i].irqenable1 =
|
|
__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1);
|
|
gpio_context[i].irqenable2 =
|
|
__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2);
|
|
gpio_context[i].wake_en =
|
|
__raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN);
|
|
gpio_context[i].ctrl =
|
|
__raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
|
|
gpio_context[i].oe =
|
|
__raw_readl(bank->base + OMAP24XX_GPIO_OE);
|
|
gpio_context[i].leveldetect0 =
|
|
__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
|
|
gpio_context[i].leveldetect1 =
|
|
__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
|
|
gpio_context[i].risingdetect =
|
|
__raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
|
|
gpio_context[i].fallingdetect =
|
|
__raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
|
|
gpio_context[i].dataout =
|
|
__raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT);
|
|
}
|
|
}
|
|
|
|
/* restore the required registers of bank 2-6 */
|
|
void omap_gpio_restore_context(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 1; i < gpio_bank_count; i++) {
|
|
struct gpio_bank *bank = &gpio_bank[i];
|
|
__raw_writel(gpio_context[i].irqenable1,
|
|
bank->base + OMAP24XX_GPIO_IRQENABLE1);
|
|
__raw_writel(gpio_context[i].irqenable2,
|
|
bank->base + OMAP24XX_GPIO_IRQENABLE2);
|
|
__raw_writel(gpio_context[i].wake_en,
|
|
bank->base + OMAP24XX_GPIO_WAKE_EN);
|
|
__raw_writel(gpio_context[i].ctrl,
|
|
bank->base + OMAP24XX_GPIO_CTRL);
|
|
__raw_writel(gpio_context[i].oe,
|
|
bank->base + OMAP24XX_GPIO_OE);
|
|
__raw_writel(gpio_context[i].leveldetect0,
|
|
bank->base + OMAP24XX_GPIO_LEVELDETECT0);
|
|
__raw_writel(gpio_context[i].leveldetect1,
|
|
bank->base + OMAP24XX_GPIO_LEVELDETECT1);
|
|
__raw_writel(gpio_context[i].risingdetect,
|
|
bank->base + OMAP24XX_GPIO_RISINGDETECT);
|
|
__raw_writel(gpio_context[i].fallingdetect,
|
|
bank->base + OMAP24XX_GPIO_FALLINGDETECT);
|
|
__raw_writel(gpio_context[i].dataout,
|
|
bank->base + OMAP24XX_GPIO_DATAOUT);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
static struct platform_driver omap_gpio_driver = {
|
|
.probe = omap_gpio_probe,
|
|
.driver = {
|
|
.name = "omap_gpio",
|
|
},
|
|
};
|
|
|
|
/*
|
|
* gpio driver register needs to be done before
|
|
* machine_init functions access gpio APIs.
|
|
* Hence omap_gpio_drv_reg() is a postcore_initcall.
|
|
*/
|
|
static int __init omap_gpio_drv_reg(void)
|
|
{
|
|
return platform_driver_register(&omap_gpio_driver);
|
|
}
|
|
postcore_initcall(omap_gpio_drv_reg);
|
|
|
|
static int __init omap_gpio_sysinit(void)
|
|
{
|
|
int ret = 0;
|
|
|
|
mpuio_init();
|
|
|
|
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2PLUS)
|
|
if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
|
|
if (ret == 0) {
|
|
ret = sysdev_class_register(&omap_gpio_sysclass);
|
|
if (ret == 0)
|
|
ret = sysdev_register(&omap_gpio_device);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
return ret;
|
|
}
|
|
|
|
arch_initcall(omap_gpio_sysinit);
|