tmp_suning_uos_patched/arch/mips/ar7/setup.c
Florian Fainelli 238dd317f7 MIPS: AR7: Add support for Titan (TNETV10xx) SoC variant
Add support for Titan TNETV1050,1055,1056,1060 variants. This SoC is almost
completely identical to AR7 except on a few points:
- a second bank of gpios is available
- vlynq0 on titan is vlynq1 on ar7
- different PHY addresses for cpmac0

This SoC can be found on commercial products like the Linksys WRTP54G

Original patch by Xin with improvments by Florian.

Signed-off-by: Xin Zhen <xlonestar2000@aim.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/1563/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

---
2010-10-29 19:08:46 +01:00

107 lines
2.6 KiB
C

/*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*/
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/pm.h>
#include <linux/time.h>
#include <asm/reboot.h>
#include <asm/mach-ar7/ar7.h>
#include <asm/mach-ar7/prom.h>
#include <asm/mach-ar7/gpio.h>
static void ar7_machine_restart(char *command)
{
u32 *softres_reg = ioremap(AR7_REGS_RESET + AR7_RESET_SOFTWARE, 1);
writel(1, softres_reg);
}
static void ar7_machine_halt(void)
{
while (1)
;
}
static void ar7_machine_power_off(void)
{
u32 *power_reg = (u32 *)ioremap(AR7_REGS_POWER, 1);
u32 power_state = readl(power_reg) | (3 << 30);
writel(power_state, power_reg);
ar7_machine_halt();
}
const char *get_system_type(void)
{
u16 chip_id = ar7_chip_id();
u16 titan_variant_id = titan_chip_id();
switch (chip_id) {
case AR7_CHIP_7100:
return "TI AR7 (TNETD7100)";
case AR7_CHIP_7200:
return "TI AR7 (TNETD7200)";
case AR7_CHIP_7300:
return "TI AR7 (TNETD7300)";
case AR7_CHIP_TITAN:
switch (titan_variant_id) {
case TITAN_CHIP_1050:
return "TI AR7 (TNETV1050)";
case TITAN_CHIP_1055:
return "TI AR7 (TNETV1055)";
case TITAN_CHIP_1056:
return "TI AR7 (TNETV1056)";
case TITAN_CHIP_1060:
return "TI AR7 (TNETV1060)";
}
default:
return "TI AR7 (unknown)";
}
}
static int __init ar7_init_console(void)
{
return 0;
}
console_initcall(ar7_init_console);
/*
* Initializes basic routines and structures pointers, memory size (as
* given by the bios and saves the command line.
*/
void __init plat_mem_setup(void)
{
unsigned long io_base;
_machine_restart = ar7_machine_restart;
_machine_halt = ar7_machine_halt;
pm_power_off = ar7_machine_power_off;
panic_timeout = 3;
io_base = (unsigned long)ioremap(AR7_REGS_BASE, 0x10000);
if (!io_base)
panic("Can't remap IO base!\n");
set_io_port_base(io_base);
prom_meminit();
printk(KERN_INFO "%s, ID: 0x%04x, Revision: 0x%02x\n",
get_system_type(), ar7_chip_id(), ar7_chip_rev());
}