9cc7a453b6
The valid selector should be 0 ... nsteps-1. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
368 lines
10 KiB
C
368 lines
10 KiB
C
/*
|
|
* Regulator driver for RICOH RC5T583 power management chip.
|
|
*
|
|
* Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved.
|
|
* Author: Laxman dewangan <ldewangan@nvidia.com>
|
|
*
|
|
* based on code
|
|
* Copyright (C) 2011 RICOH COMPANY,LTD
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/err.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/mfd/rc5t583.h>
|
|
|
|
struct rc5t583_regulator_info {
|
|
int deepsleep_id;
|
|
|
|
/* Regulator register address.*/
|
|
uint8_t reg_en_reg;
|
|
uint8_t en_bit;
|
|
uint8_t reg_disc_reg;
|
|
uint8_t disc_bit;
|
|
uint8_t vout_reg;
|
|
uint8_t vout_mask;
|
|
uint8_t deepsleep_reg;
|
|
|
|
/* Chip constraints on regulator behavior */
|
|
int min_uV;
|
|
int max_uV;
|
|
int step_uV;
|
|
int nsteps;
|
|
|
|
/* Regulator specific turn-on delay and voltage settling time*/
|
|
int enable_uv_per_us;
|
|
int change_uv_per_us;
|
|
|
|
/* Used by regulator core */
|
|
struct regulator_desc desc;
|
|
};
|
|
|
|
struct rc5t583_regulator {
|
|
struct rc5t583_regulator_info *reg_info;
|
|
|
|
/* Devices */
|
|
struct device *dev;
|
|
struct rc5t583 *mfd;
|
|
struct regulator_dev *rdev;
|
|
};
|
|
|
|
static int rc5t583_reg_is_enabled(struct regulator_dev *rdev)
|
|
{
|
|
struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
|
|
struct rc5t583_regulator_info *ri = reg->reg_info;
|
|
uint8_t control;
|
|
int ret;
|
|
|
|
ret = rc5t583_read(reg->mfd->dev, ri->reg_en_reg, &control);
|
|
if (ret < 0) {
|
|
dev_err(&rdev->dev,
|
|
"Error in reading the control register 0x%02x\n",
|
|
ri->reg_en_reg);
|
|
return ret;
|
|
}
|
|
return !!(control & BIT(ri->en_bit));
|
|
}
|
|
|
|
static int rc5t583_reg_enable(struct regulator_dev *rdev)
|
|
{
|
|
struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
|
|
struct rc5t583_regulator_info *ri = reg->reg_info;
|
|
int ret;
|
|
|
|
ret = rc5t583_set_bits(reg->mfd->dev, ri->reg_en_reg,
|
|
(1 << ri->en_bit));
|
|
if (ret < 0) {
|
|
dev_err(&rdev->dev,
|
|
"Error in setting bit of STATE register 0x%02x\n",
|
|
ri->reg_en_reg);
|
|
return ret;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int rc5t583_reg_disable(struct regulator_dev *rdev)
|
|
{
|
|
struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
|
|
struct rc5t583_regulator_info *ri = reg->reg_info;
|
|
int ret;
|
|
|
|
ret = rc5t583_clear_bits(reg->mfd->dev, ri->reg_en_reg,
|
|
(1 << ri->en_bit));
|
|
if (ret < 0)
|
|
dev_err(&rdev->dev,
|
|
"Error in clearing bit of STATE register 0x%02x\n",
|
|
ri->reg_en_reg);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int rc5t583_list_voltage(struct regulator_dev *rdev, unsigned selector)
|
|
{
|
|
struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
|
|
struct rc5t583_regulator_info *ri = reg->reg_info;
|
|
return ri->min_uV + (ri->step_uV * selector);
|
|
}
|
|
|
|
static int rc5t583_set_voltage_sel(struct regulator_dev *rdev,
|
|
unsigned int selector)
|
|
{
|
|
struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
|
|
struct rc5t583_regulator_info *ri = reg->reg_info;
|
|
int ret;
|
|
if (selector >= ri->nsteps) {
|
|
dev_err(&rdev->dev, "Invalid selector 0x%02x\n", selector);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = rc5t583_update(reg->mfd->dev, ri->vout_reg,
|
|
selector, ri->vout_mask);
|
|
if (ret < 0)
|
|
dev_err(&rdev->dev,
|
|
"Error in update voltage register 0x%02x\n", ri->vout_reg);
|
|
return ret;
|
|
}
|
|
|
|
static int rc5t583_get_voltage_sel(struct regulator_dev *rdev)
|
|
{
|
|
struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
|
|
struct rc5t583_regulator_info *ri = reg->reg_info;
|
|
uint8_t vsel;
|
|
int ret;
|
|
ret = rc5t583_read(reg->mfd->dev, ri->vout_reg, &vsel);
|
|
if (ret < 0) {
|
|
dev_err(&rdev->dev,
|
|
"Error in reading voltage register 0x%02x\n", ri->vout_reg);
|
|
return ret;
|
|
}
|
|
return vsel & ri->vout_mask;
|
|
}
|
|
|
|
static int rc5t583_regulator_enable_time(struct regulator_dev *rdev)
|
|
{
|
|
struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
|
|
int vsel = rc5t583_get_voltage_sel(rdev);
|
|
int curr_uV = rc5t583_list_voltage(rdev, vsel);
|
|
return DIV_ROUND_UP(curr_uV, reg->reg_info->enable_uv_per_us);
|
|
}
|
|
|
|
static int rc5t583_set_voltage_time_sel(struct regulator_dev *rdev,
|
|
unsigned int old_selector, unsigned int new_selector)
|
|
{
|
|
struct rc5t583_regulator *reg = rdev_get_drvdata(rdev);
|
|
int old_uV, new_uV;
|
|
old_uV = rc5t583_list_voltage(rdev, old_selector);
|
|
|
|
if (old_uV < 0)
|
|
return old_uV;
|
|
|
|
new_uV = rc5t583_list_voltage(rdev, new_selector);
|
|
if (new_uV < 0)
|
|
return new_uV;
|
|
|
|
return DIV_ROUND_UP(abs(old_uV - new_uV),
|
|
reg->reg_info->change_uv_per_us);
|
|
}
|
|
|
|
|
|
static struct regulator_ops rc5t583_ops = {
|
|
.is_enabled = rc5t583_reg_is_enabled,
|
|
.enable = rc5t583_reg_enable,
|
|
.disable = rc5t583_reg_disable,
|
|
.enable_time = rc5t583_regulator_enable_time,
|
|
.get_voltage_sel = rc5t583_get_voltage_sel,
|
|
.set_voltage_sel = rc5t583_set_voltage_sel,
|
|
.list_voltage = rc5t583_list_voltage,
|
|
.set_voltage_time_sel = rc5t583_set_voltage_time_sel,
|
|
};
|
|
|
|
#define RC5T583_REG(_id, _en_reg, _en_bit, _disc_reg, _disc_bit, _vout_reg, \
|
|
_vout_mask, _ds_reg, _min_mv, _max_mv, _step_uV, _nsteps, \
|
|
_enable_mv) \
|
|
{ \
|
|
.reg_en_reg = RC5T583_REG_##_en_reg, \
|
|
.en_bit = _en_bit, \
|
|
.reg_disc_reg = RC5T583_REG_##_disc_reg, \
|
|
.disc_bit = _disc_bit, \
|
|
.vout_reg = RC5T583_REG_##_vout_reg, \
|
|
.vout_mask = _vout_mask, \
|
|
.deepsleep_reg = RC5T583_REG_##_ds_reg, \
|
|
.min_uV = _min_mv * 1000, \
|
|
.max_uV = _max_mv * 1000, \
|
|
.step_uV = _step_uV, \
|
|
.nsteps = _nsteps, \
|
|
.enable_uv_per_us = _enable_mv * 1000, \
|
|
.change_uv_per_us = 40 * 1000, \
|
|
.deepsleep_id = RC5T583_DS_##_id, \
|
|
.desc = { \
|
|
.name = "rc5t583-regulator-"#_id, \
|
|
.id = RC5T583_REGULATOR_##_id, \
|
|
.n_voltages = _nsteps, \
|
|
.ops = &rc5t583_ops, \
|
|
.type = REGULATOR_VOLTAGE, \
|
|
.owner = THIS_MODULE, \
|
|
}, \
|
|
}
|
|
|
|
static struct rc5t583_regulator_info rc5t583_reg_info[RC5T583_REGULATOR_MAX] = {
|
|
RC5T583_REG(DC0, DC0CTL, 0, DC0CTL, 1, DC0DAC, 0x7F, DC0DAC_DS,
|
|
700, 1500, 12500, 0x41, 4),
|
|
RC5T583_REG(DC1, DC1CTL, 0, DC1CTL, 1, DC1DAC, 0x7F, DC1DAC_DS,
|
|
700, 1500, 12500, 0x41, 14),
|
|
RC5T583_REG(DC2, DC2CTL, 0, DC2CTL, 1, DC2DAC, 0x7F, DC2DAC_DS,
|
|
900, 2400, 12500, 0x79, 14),
|
|
RC5T583_REG(DC3, DC3CTL, 0, DC3CTL, 1, DC3DAC, 0x7F, DC3DAC_DS,
|
|
900, 2400, 12500, 0x79, 14),
|
|
RC5T583_REG(LDO0, LDOEN2, 0, LDODIS2, 0, LDO0DAC, 0x7F, LDO0DAC_DS,
|
|
900, 3400, 25000, 0x65, 160),
|
|
RC5T583_REG(LDO1, LDOEN2, 1, LDODIS2, 1, LDO1DAC, 0x7F, LDO1DAC_DS,
|
|
900, 3400, 25000, 0x65, 160),
|
|
RC5T583_REG(LDO2, LDOEN2, 2, LDODIS2, 2, LDO2DAC, 0x7F, LDO2DAC_DS,
|
|
900, 3400, 25000, 0x65, 160),
|
|
RC5T583_REG(LDO3, LDOEN2, 3, LDODIS2, 3, LDO3DAC, 0x7F, LDO3DAC_DS,
|
|
900, 3400, 25000, 0x65, 160),
|
|
RC5T583_REG(LDO4, LDOEN2, 4, LDODIS2, 4, LDO4DAC, 0x3F, LDO4DAC_DS,
|
|
750, 1500, 12500, 0x3D, 133),
|
|
RC5T583_REG(LDO5, LDOEN2, 5, LDODIS2, 5, LDO5DAC, 0x7F, LDO5DAC_DS,
|
|
900, 3400, 25000, 0x65, 267),
|
|
RC5T583_REG(LDO6, LDOEN2, 6, LDODIS2, 6, LDO6DAC, 0x7F, LDO6DAC_DS,
|
|
900, 3400, 25000, 0x65, 133),
|
|
RC5T583_REG(LDO7, LDOEN2, 7, LDODIS2, 7, LDO7DAC, 0x7F, LDO7DAC_DS,
|
|
900, 3400, 25000, 0x65, 233),
|
|
RC5T583_REG(LDO8, LDOEN1, 0, LDODIS1, 0, LDO8DAC, 0x7F, LDO8DAC_DS,
|
|
900, 3400, 25000, 0x65, 233),
|
|
RC5T583_REG(LDO9, LDOEN1, 1, LDODIS1, 1, LDO9DAC, 0x7F, LDO9DAC_DS,
|
|
900, 3400, 25000, 0x65, 133),
|
|
};
|
|
|
|
static int __devinit rc5t583_regulator_probe(struct platform_device *pdev)
|
|
{
|
|
struct rc5t583 *rc5t583 = dev_get_drvdata(pdev->dev.parent);
|
|
struct rc5t583_platform_data *pdata = dev_get_platdata(rc5t583->dev);
|
|
struct regulator_init_data *reg_data;
|
|
struct rc5t583_regulator *reg = NULL;
|
|
struct rc5t583_regulator *regs;
|
|
struct regulator_dev *rdev;
|
|
struct rc5t583_regulator_info *ri;
|
|
int ret;
|
|
int id;
|
|
|
|
if (!pdata) {
|
|
dev_err(&pdev->dev, "No platform data, exiting...\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
regs = devm_kzalloc(&pdev->dev, RC5T583_REGULATOR_MAX *
|
|
sizeof(struct rc5t583_regulator), GFP_KERNEL);
|
|
if (!regs) {
|
|
dev_err(&pdev->dev, "Memory allocation failed exiting..\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
|
|
for (id = 0; id < RC5T583_REGULATOR_MAX; ++id) {
|
|
reg_data = pdata->reg_init_data[id];
|
|
|
|
/* No need to register if there is no regulator data */
|
|
if (!reg_data)
|
|
continue;
|
|
|
|
reg = ®s[id];
|
|
ri = &rc5t583_reg_info[id];
|
|
reg->reg_info = ri;
|
|
reg->mfd = rc5t583;
|
|
reg->dev = &pdev->dev;
|
|
|
|
if (ri->deepsleep_id == RC5T583_DS_NONE)
|
|
goto skip_ext_pwr_config;
|
|
|
|
ret = rc5t583_ext_power_req_config(rc5t583->dev,
|
|
ri->deepsleep_id,
|
|
pdata->regulator_ext_pwr_control[id],
|
|
pdata->regulator_deepsleep_slot[id]);
|
|
/*
|
|
* Configuring external control is not a major issue,
|
|
* just give warning.
|
|
*/
|
|
if (ret < 0)
|
|
dev_warn(&pdev->dev,
|
|
"Failed to configure ext control %d\n", id);
|
|
|
|
skip_ext_pwr_config:
|
|
rdev = regulator_register(&ri->desc, &pdev->dev,
|
|
reg_data, reg, NULL);
|
|
if (IS_ERR(rdev)) {
|
|
dev_err(&pdev->dev, "Failed to register regulator %s\n",
|
|
ri->desc.name);
|
|
ret = PTR_ERR(rdev);
|
|
goto clean_exit;
|
|
}
|
|
reg->rdev = rdev;
|
|
}
|
|
platform_set_drvdata(pdev, regs);
|
|
return 0;
|
|
|
|
clean_exit:
|
|
while (--id >= 0)
|
|
regulator_unregister(regs[id].rdev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __devexit rc5t583_regulator_remove(struct platform_device *pdev)
|
|
{
|
|
struct rc5t583_regulator *regs = platform_get_drvdata(pdev);
|
|
int id;
|
|
|
|
for (id = 0; id < RC5T583_REGULATOR_MAX; ++id)
|
|
regulator_unregister(regs[id].rdev);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver rc5t583_regulator_driver = {
|
|
.driver = {
|
|
.name = "rc5t583-regulator",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
.probe = rc5t583_regulator_probe,
|
|
.remove = __devexit_p(rc5t583_regulator_remove),
|
|
};
|
|
|
|
static int __init rc5t583_regulator_init(void)
|
|
{
|
|
return platform_driver_register(&rc5t583_regulator_driver);
|
|
}
|
|
subsys_initcall(rc5t583_regulator_init);
|
|
|
|
static void __exit rc5t583_regulator_exit(void)
|
|
{
|
|
platform_driver_unregister(&rc5t583_regulator_driver);
|
|
}
|
|
module_exit(rc5t583_regulator_exit);
|
|
|
|
MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
|
|
MODULE_DESCRIPTION("RC5T583 regulator driver");
|
|
MODULE_ALIAS("platform:rc5t583-regulator");
|
|
MODULE_LICENSE("GPL V2");
|