Emmanuel Grumbach a754055a12 mac80211: correctly close cancelled scans ... __ieee80211_scan_completed is called from a worker. This means that the following flow is possible. * driver calls ieee80211_scan_completed * mac80211 cancels the scan (that is already complete) * __ieee80211_scan_completed runs When scan_work will finally run, it will see that the scan hasn't been aborted and might even trigger another scan on another band. This leads to a situation where cfg80211's scan is not done and no further scan can be issued. Fix this by setting a new flag when a HW scan is being cancelled so that no other scan will be triggered. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>		2013-10-09 18:40:07 +02:00
..
aes_ccm.c	wireless: move crypto constants to ieee80211.h	2013-05-16 22:39:41 +02:00
aes_ccm.h
aes_cmac.c	mac80211: include export.h in aes_cmac	2012-11-07 18:01:54 +01:00
aes_cmac.h
agg-rx.c	mac80211: improve aggregation debug messages	2013-01-18 21:55:15 +01:00
agg-tx.c	mac80211: fix aggregation state with current drivers	2013-01-24 15:43:51 +01:00
cfg.c	mac80211: use sta_info_get_bss() for nl80211 tx and client probing	2013-09-30 11:30:57 +02:00
cfg.h
chan.c	mac80211: add channel switch command and beacon callbacks	2013-08-01 18:30:33 +02:00
debug.h	mac80211: mesh power save basics	2013-02-04 18:57:47 +01:00
debugfs_key.c	mac80211: move sdata debugfs dir to vif	2013-03-18 20:10:04 +01:00
debugfs_key.h
debugfs_netdev.c	cfg80211/mac80211: use cfg80211 wdev mutex in mac80211	2013-05-25 00:02:16 +02:00
debugfs_netdev.h
debugfs_sta.c	mac80211: add debugfs for driver-buffered TID bitmap	2013-08-01 15:08:24 +02:00
debugfs_sta.h
debugfs.c	mac80211: remove IEEE80211_HW_SCAN_WHILE_IDLE	2013-02-11 18:45:01 +01:00
debugfs.h	mac80211: use __printf attribute in debugfs	2012-10-18 09:01:57 +02:00
driver-ops.h	mac80211: add channel switch command and beacon callbacks	2013-08-01 18:30:33 +02:00
event.c
ht.c	mac80211: enable HT overrides for ibss	2013-07-16 09:57:57 +03:00
ibss.c	Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless	2013-08-28 10:36:09 -04:00
ieee80211_i.h	mac80211: correctly close cancelled scans	2013-10-09 18:40:07 +02:00
iface.c	mac80211: fix change_interface queue assignments	2013-08-26 09:52:58 +02:00
Kconfig	Driver core patches for 3.9-rc1	2013-02-21 12:05:51 -08:00
key.c	mac80211: add APIs to allow keeping connections after WoWLAN	2013-08-16 12:58:43 +02:00
key.h	wireless: move crypto constants to ieee80211.h	2013-05-16 22:39:41 +02:00
led.c	mac80211: use oneshot blink API for LED triggers	2013-08-01 10:48:49 +02:00
led.h	mac80211: use oneshot blink API for LED triggers	2013-08-01 10:48:49 +02:00
main.c	mac80211: move setting WIPHY_FLAG_SUPPORTS_SCHED_SCAN into drivers	2013-08-23 12:02:26 +02:00
Makefile	mac80211: mesh power save basics	2013-02-04 18:57:47 +01:00
mesh_hwmp.c	mac80211: parse VHT channel switch IEs	2013-04-16 15:29:45 +02:00
mesh_pathtbl.c	mac80211: return new mpath from mesh_path_add()	2013-04-08 09:16:59 +02:00
mesh_plink.c	mac80211: select and adjust bitrates according to channel mode	2013-07-16 09:58:06 +03:00
mesh_ps.c	mac80211: prevent the buffering or frame transmission to non-assoc mesh STA	2013-07-22 15:32:47 +02:00
mesh_sync.c	mac80211: clean up mesh code	2013-02-15 15:46:37 +01:00
mesh.c	mac80211: only respond to probe request with mesh ID	2013-08-23 15:25:06 +02:00
mesh.h	mac80211: update mesh beacon on workqueue	2013-06-18 15:57:27 +02:00
michael.c
michael.h
mlme.c	Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211	2013-08-28 13:49:20 -04:00
offchannel.c	mac80211: Run deferred scan if last roc_list item is not started	2013-09-30 12:36:56 +02:00
pm.c	mac80211: fix monitor interface suspend crash regression	2013-07-23 14:02:08 +02:00
rate.c	mac80211: allow lowest basic rate for unicast management for mesh	2013-08-09 15:11:27 +02:00
rate.h	mac80211/rc80211: add chandef to rate initialization	2013-07-16 09:58:02 +03:00
rc80211_minstrel_debugfs.c	mac80211: cosmetics for minstrel_debugfs	2013-04-17 17:08:23 +02:00
rc80211_minstrel_ht_debugfs.c	mac80211/minstrel_ht: add support for using CCK rates	2013-02-13 10:56:33 +01:00
rc80211_minstrel_ht.c	Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next	2013-08-28 13:51:40 -04:00
rc80211_minstrel_ht.h	mac80211/minstrel_ht: use the new rate control API	2013-04-22 16:16:41 +02:00
rc80211_minstrel.c	Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next	2013-08-01 15:26:52 -04:00
rc80211_minstrel.h	mac80211/minstrel: use the new rate control API	2013-04-22 16:16:41 +02:00
rc80211_pid_algo.c	mac80211/rc80211: add chandef to rate initialization	2013-07-16 09:58:02 +03:00
rc80211_pid_debugfs.c
rc80211_pid.h
rx.c	mac80211: drop spoofed packets in ad-hoc mode	2013-09-26 19:56:06 +02:00
scan.c	mac80211: correctly close cancelled scans	2013-10-09 18:40:07 +02:00
spectmgmt.c
sta_info.c	mac80211: initialize power mode for mesh STAs	2013-06-24 15:59:20 +02:00
sta_info.h	mac80211: Ensure tid_start_tx is protected by sta->lock	2013-06-13 10:27:07 +02:00
status.c	mac80211: update sta->last_rx on acked tx frames	2013-09-30 12:34:09 +02:00
tkip.c	mac80211: use just spin_lock() in ieee80211_get_tkip_p2k()	2013-05-16 22:38:06 +02:00
tkip.h
trace.c
trace.h	mac80211: add channel switch command and beacon callbacks	2013-08-01 18:30:33 +02:00
tx.c	mac80211: use sta_info_get_bss() for nl80211 tx and client probing	2013-09-30 11:30:57 +02:00
util.c	mac80211: fix the setting of extended supported rate IE	2013-09-26 19:56:59 +02:00
vht.c	mac80211: Fix VHT bandwidth change event	2013-06-13 11:58:47 +02:00
wep.c	wireless: move crypto constants to ieee80211.h	2013-05-16 22:39:41 +02:00
wep.h
wme.c	mac80211: mesh power save basics	2013-02-04 18:57:47 +01:00
wme.h
wpa.c	wireless: move crypto constants to ieee80211.h	2013-05-16 22:39:41 +02:00
wpa.h