38e760a133
Add missing IRQs and IRQ descriptions to /proc/interrupts. /proc/interrupts is most useful when it displays every IRQ vector in use by the system, not just those somebody thought would be interesting. This patch inserts the following vector displays to the i386 and x86_64 platforms, as appropriate: rescheduling interrupts TLB flush interrupts function call interrupts thermal event interrupts threshold interrupts spurious interrupts A threshold interrupt occurs when ECC memory correction is occuring at too high a frequency. Thresholds are used by the ECC hardware as occasional ECC failures are part of normal operation, but long sequences of ECC failures usually indicate a memory chip that is about to fail. Thermal event interrupts occur when a temperature threshold has been exceeded for some CPU chip. IIRC, a thermal interrupt is also generated when the temperature drops back to a normal level. A spurious interrupt is an interrupt that was raised then lowered by the device before it could be fully processed by the APIC. Hence the apic sees the interrupt but does not know what device it came from. For this case the APIC hardware will assume a vector of 0xff. Rescheduling, call, and TLB flush interrupts are sent from one CPU to another per the needs of the OS. Typically, their statistics would be used to discover if an interrupt flood of the given type has been occuring. AK: merged v2 and v4 which had some more tweaks AK: replace Local interrupts with Local timer interrupts AK: Fixed description of interrupt types. [ tglx: arch/x86 adaptation ] [ mingo: small cleanup ] Signed-off-by: Joe Korty <joe.korty@ccur.com> Signed-off-by: Andi Kleen <ak@suse.de> Cc: Tim Hockin <thockin@hockin.org> Cc: Andi Kleen <ak@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
29 lines
734 B
C
29 lines
734 B
C
#ifndef __ASM_HARDIRQ_H
|
|
#define __ASM_HARDIRQ_H
|
|
|
|
#include <linux/threads.h>
|
|
#include <linux/irq.h>
|
|
|
|
typedef struct {
|
|
unsigned int __softirq_pending;
|
|
unsigned long idle_timestamp;
|
|
unsigned int __nmi_count; /* arch dependent */
|
|
unsigned int apic_timer_irqs; /* arch dependent */
|
|
unsigned int irq0_irqs;
|
|
unsigned int irq_resched_count;
|
|
unsigned int irq_call_count;
|
|
unsigned int irq_tlb_count;
|
|
unsigned int irq_thermal_count;
|
|
unsigned int irq_spurious_count;
|
|
} ____cacheline_aligned irq_cpustat_t;
|
|
|
|
DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
|
|
|
|
#define __ARCH_IRQ_STAT
|
|
#define __IRQ_STAT(cpu, member) (per_cpu(irq_stat, cpu).member)
|
|
|
|
void ack_bad_irq(unsigned int irq);
|
|
#include <linux/irq_cpustat.h>
|
|
|
|
#endif /* __ASM_HARDIRQ_H */
|