c942fddf87
Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
237 lines
7.9 KiB
C
237 lines
7.9 KiB
C
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
|
/*
|
|
* driver for ENE KB3926 B/C/D/E/F CIR (also known as ENE0XXX)
|
|
*
|
|
* Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
|
|
*/
|
|
#include <linux/spinlock.h>
|
|
|
|
|
|
/* hardware address */
|
|
#define ENE_STATUS 0 /* hardware status - unused */
|
|
#define ENE_ADDR_HI 1 /* hi byte of register address */
|
|
#define ENE_ADDR_LO 2 /* low byte of register address */
|
|
#define ENE_IO 3 /* read/write window */
|
|
#define ENE_IO_SIZE 4
|
|
|
|
/* 8 bytes of samples, divided in 2 packets*/
|
|
#define ENE_FW_SAMPLE_BUFFER 0xF8F0 /* sample buffer */
|
|
#define ENE_FW_SAMPLE_SPACE 0x80 /* sample is space */
|
|
#define ENE_FW_PACKET_SIZE 4
|
|
|
|
/* first firmware flag register */
|
|
#define ENE_FW1 0xF8F8 /* flagr */
|
|
#define ENE_FW1_ENABLE 0x01 /* enable fw processing */
|
|
#define ENE_FW1_TXIRQ 0x02 /* TX interrupt pending */
|
|
#define ENE_FW1_HAS_EXTRA_BUF 0x04 /* fw uses extra buffer*/
|
|
#define ENE_FW1_EXTRA_BUF_HND 0x08 /* extra buffer handshake bit*/
|
|
#define ENE_FW1_LED_ON 0x10 /* turn on a led */
|
|
|
|
#define ENE_FW1_WPATTERN 0x20 /* enable wake pattern */
|
|
#define ENE_FW1_WAKE 0x40 /* enable wake from S3 */
|
|
#define ENE_FW1_IRQ 0x80 /* enable interrupt */
|
|
|
|
/* second firmware flag register */
|
|
#define ENE_FW2 0xF8F9 /* flagw */
|
|
#define ENE_FW2_BUF_WPTR 0x01 /* which half of the buffer to read */
|
|
#define ENE_FW2_RXIRQ 0x04 /* RX IRQ pending*/
|
|
#define ENE_FW2_GP0A 0x08 /* Use GPIO0A for demodulated input */
|
|
#define ENE_FW2_EMMITER1_CONN 0x10 /* TX emmiter 1 connected */
|
|
#define ENE_FW2_EMMITER2_CONN 0x20 /* TX emmiter 2 connected */
|
|
|
|
#define ENE_FW2_FAN_INPUT 0x40 /* fan input used for demodulated data*/
|
|
#define ENE_FW2_LEARNING 0x80 /* hardware supports learning and TX */
|
|
|
|
/* firmware RX pointer for new style buffer */
|
|
#define ENE_FW_RX_POINTER 0xF8FA
|
|
|
|
/* high parts of samples for fan input (8 samples)*/
|
|
#define ENE_FW_SMPL_BUF_FAN 0xF8FB
|
|
#define ENE_FW_SMPL_BUF_FAN_PLS 0x8000 /* combined sample is pulse */
|
|
#define ENE_FW_SMPL_BUF_FAN_MSK 0x0FFF /* combined sample maximum value */
|
|
#define ENE_FW_SAMPLE_PERIOD_FAN 61 /* fan input has fixed sample period */
|
|
|
|
/* transmitter ports */
|
|
#define ENE_GPIOFS1 0xFC01
|
|
#define ENE_GPIOFS1_GPIO0D 0x20 /* enable tx output on GPIO0D */
|
|
#define ENE_GPIOFS8 0xFC08
|
|
#define ENE_GPIOFS8_GPIO41 0x02 /* enable tx output on GPIO40 */
|
|
|
|
/* IRQ registers block (for revision B) */
|
|
#define ENEB_IRQ 0xFD09 /* IRQ number */
|
|
#define ENEB_IRQ_UNK1 0xFD17 /* unknown setting = 1 */
|
|
#define ENEB_IRQ_STATUS 0xFD80 /* irq status */
|
|
#define ENEB_IRQ_STATUS_IR 0x20 /* IR irq */
|
|
|
|
/* fan as input settings */
|
|
#define ENE_FAN_AS_IN1 0xFE30 /* fan init reg 1 */
|
|
#define ENE_FAN_AS_IN1_EN 0xCD
|
|
#define ENE_FAN_AS_IN2 0xFE31 /* fan init reg 2 */
|
|
#define ENE_FAN_AS_IN2_EN 0x03
|
|
|
|
/* IRQ registers block (for revision C,D) */
|
|
#define ENE_IRQ 0xFE9B /* new irq settings register */
|
|
#define ENE_IRQ_MASK 0x0F /* irq number mask */
|
|
#define ENE_IRQ_UNK_EN 0x10 /* always enabled */
|
|
#define ENE_IRQ_STATUS 0x20 /* irq status and ACK */
|
|
|
|
/* CIR Config register #1 */
|
|
#define ENE_CIRCFG 0xFEC0
|
|
#define ENE_CIRCFG_RX_EN 0x01 /* RX enable */
|
|
#define ENE_CIRCFG_RX_IRQ 0x02 /* Enable hardware interrupt */
|
|
#define ENE_CIRCFG_REV_POL 0x04 /* Input polarity reversed */
|
|
#define ENE_CIRCFG_CARR_DEMOD 0x08 /* Enable carrier demodulator */
|
|
|
|
#define ENE_CIRCFG_TX_EN 0x10 /* TX enable */
|
|
#define ENE_CIRCFG_TX_IRQ 0x20 /* Send interrupt on TX done */
|
|
#define ENE_CIRCFG_TX_POL_REV 0x40 /* TX polarity reversed */
|
|
#define ENE_CIRCFG_TX_CARR 0x80 /* send TX carrier or not */
|
|
|
|
/* CIR config register #2 */
|
|
#define ENE_CIRCFG2 0xFEC1
|
|
#define ENE_CIRCFG2_RLC 0x00
|
|
#define ENE_CIRCFG2_RC5 0x01
|
|
#define ENE_CIRCFG2_RC6 0x02
|
|
#define ENE_CIRCFG2_NEC 0x03
|
|
#define ENE_CIRCFG2_CARR_DETECT 0x10 /* Enable carrier detection */
|
|
#define ENE_CIRCFG2_GPIO0A 0x20 /* Use GPIO0A instead of GPIO40 for input */
|
|
#define ENE_CIRCFG2_FAST_SAMPL1 0x40 /* Fast leading pulse detection for RC6 */
|
|
#define ENE_CIRCFG2_FAST_SAMPL2 0x80 /* Fast data detection for RC6 */
|
|
|
|
/* Knobs for protocol decoding - will document when/if will use them */
|
|
#define ENE_CIRPF 0xFEC2
|
|
#define ENE_CIRHIGH 0xFEC3
|
|
#define ENE_CIRBIT 0xFEC4
|
|
#define ENE_CIRSTART 0xFEC5
|
|
#define ENE_CIRSTART2 0xFEC6
|
|
|
|
/* Actual register which contains RLC RX data - read by firmware */
|
|
#define ENE_CIRDAT_IN 0xFEC7
|
|
|
|
|
|
/* RLC configuration - sample period (1us resolution) + idle mode */
|
|
#define ENE_CIRRLC_CFG 0xFEC8
|
|
#define ENE_CIRRLC_CFG_OVERFLOW 0x80 /* interrupt on overflows if set */
|
|
#define ENE_DEFAULT_SAMPLE_PERIOD 50
|
|
|
|
/* Two byte RLC TX buffer */
|
|
#define ENE_CIRRLC_OUT0 0xFEC9
|
|
#define ENE_CIRRLC_OUT1 0xFECA
|
|
#define ENE_CIRRLC_OUT_PULSE 0x80 /* Transmitted sample is pulse */
|
|
#define ENE_CIRRLC_OUT_MASK 0x7F
|
|
|
|
|
|
/* Carrier detect setting
|
|
* Low nibble - number of carrier pulses to average
|
|
* High nibble - number of initial carrier pulses to discard
|
|
*/
|
|
#define ENE_CIRCAR_PULS 0xFECB
|
|
|
|
/* detected RX carrier period (resolution: 500 ns) */
|
|
#define ENE_CIRCAR_PRD 0xFECC
|
|
#define ENE_CIRCAR_PRD_VALID 0x80 /* data valid content valid */
|
|
|
|
/* detected RX carrier pulse width (resolution: 500 ns) */
|
|
#define ENE_CIRCAR_HPRD 0xFECD
|
|
|
|
/* TX period (resolution: 500 ns, minimum 2)*/
|
|
#define ENE_CIRMOD_PRD 0xFECE
|
|
#define ENE_CIRMOD_PRD_POL 0x80 /* TX carrier polarity*/
|
|
|
|
#define ENE_CIRMOD_PRD_MAX 0x7F /* 15.87 kHz */
|
|
#define ENE_CIRMOD_PRD_MIN 0x02 /* 1 Mhz */
|
|
|
|
/* TX pulse width (resolution: 500 ns)*/
|
|
#define ENE_CIRMOD_HPRD 0xFECF
|
|
|
|
/* Hardware versions */
|
|
#define ENE_ECHV 0xFF00 /* hardware revision */
|
|
#define ENE_PLLFRH 0xFF16
|
|
#define ENE_PLLFRL 0xFF17
|
|
#define ENE_DEFAULT_PLL_FREQ 1000
|
|
|
|
#define ENE_ECSTS 0xFF1D
|
|
#define ENE_ECSTS_RSRVD 0x04
|
|
|
|
#define ENE_ECVER_MAJOR 0xFF1E /* chip version */
|
|
#define ENE_ECVER_MINOR 0xFF1F
|
|
#define ENE_HW_VER_OLD 0xFD00
|
|
|
|
/******************************************************************************/
|
|
|
|
#define ENE_DRIVER_NAME "ene_ir"
|
|
|
|
#define ENE_IRQ_RX 1
|
|
#define ENE_IRQ_TX 2
|
|
|
|
#define ENE_HW_B 1 /* 3926B */
|
|
#define ENE_HW_C 2 /* 3926C */
|
|
#define ENE_HW_D 3 /* 3926D or later */
|
|
|
|
#define __dbg(level, format, ...) \
|
|
do { \
|
|
if (debug >= level) \
|
|
pr_info(format "\n", ## __VA_ARGS__); \
|
|
} while (0)
|
|
|
|
#define dbg(format, ...) __dbg(1, format, ## __VA_ARGS__)
|
|
#define dbg_verbose(format, ...) __dbg(2, format, ## __VA_ARGS__)
|
|
#define dbg_regs(format, ...) __dbg(3, format, ## __VA_ARGS__)
|
|
|
|
struct ene_device {
|
|
struct pnp_dev *pnp_dev;
|
|
struct rc_dev *rdev;
|
|
|
|
/* hw IO settings */
|
|
long hw_io;
|
|
int irq;
|
|
spinlock_t hw_lock;
|
|
|
|
/* HW features */
|
|
int hw_revision; /* hardware revision */
|
|
bool hw_use_gpio_0a; /* gpio0a is demodulated input*/
|
|
bool hw_extra_buffer; /* hardware has 'extra buffer' */
|
|
bool hw_fan_input; /* fan input is IR data source */
|
|
bool hw_learning_and_tx_capable; /* learning & tx capable */
|
|
int pll_freq;
|
|
int buffer_len;
|
|
|
|
/* Extra RX buffer location */
|
|
int extra_buf1_address;
|
|
int extra_buf1_len;
|
|
int extra_buf2_address;
|
|
int extra_buf2_len;
|
|
|
|
/* HW state*/
|
|
int r_pointer; /* pointer to next sample to read */
|
|
int w_pointer; /* pointer to next sample hw will write */
|
|
bool rx_fan_input_inuse; /* is fan input in use for rx*/
|
|
int tx_reg; /* current reg used for TX */
|
|
u8 saved_conf1; /* saved FEC0 reg */
|
|
unsigned int tx_sample; /* current sample for TX */
|
|
bool tx_sample_pulse; /* current sample is pulse */
|
|
|
|
/* TX buffer */
|
|
unsigned *tx_buffer; /* input samples buffer*/
|
|
int tx_pos; /* position in that buffer */
|
|
int tx_len; /* current len of tx buffer */
|
|
int tx_done; /* done transmitting */
|
|
/* one more sample pending*/
|
|
struct completion tx_complete; /* TX completion */
|
|
struct timer_list tx_sim_timer;
|
|
|
|
/* TX settings */
|
|
int tx_period;
|
|
int tx_duty_cycle;
|
|
int transmitter_mask;
|
|
|
|
/* RX settings */
|
|
bool learning_mode_enabled; /* learning input enabled */
|
|
bool carrier_detect_enabled; /* carrier detect enabled */
|
|
int rx_period_adjust;
|
|
bool rx_enabled;
|
|
};
|
|
|
|
static int ene_irq_status(struct ene_device *dev);
|
|
static void ene_rx_read_hw_pointer(struct ene_device *dev);
|