cb5485a0b9
The PCI-e addressing was originally patterned of the MPC8548CDS which has PCI1, PCI2, and PCI-e. Since this board only has PCI1 and PCI-e, it makes more sense to be similar to the MPC8568MDS board. This does that by cutting the PCI/PCI-e I/O sizes from 16MB to 8MB and pulling the PCI-e I/O range back to 0xe280_0000 (the hole where PCI2 I/O would have been). This also fixes a typo where an extra zero made an 8MB range a 128MB range, removes the hole left by PCI2 from the aliases, and sets the clocks to match the oscillators that are actually on the board. With accompanying u-boot updates, PCI-e has been validated with both a sky2 card (1148:9e00) and an e1000 card (8086:108b). Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> |
||
|---|---|---|
| .. | ||
| dtc-src | ||
| dts | ||
| .gitignore | ||
| 4xx.c | ||
| 4xx.h | ||
| 44x.h | ||
| addnote.c | ||
| addRamDisk.c | ||
| bamboo.c | ||
| cpm-serial.c | ||
| crt0.S | ||
| crtsavres.S | ||
| cuboot-8xx.c | ||
| cuboot-52xx.c | ||
| cuboot-83xx.c | ||
| cuboot-85xx-cpm2.c | ||
| cuboot-85xx.c | ||
| cuboot-824x.c | ||
| cuboot-acadia.c | ||
| cuboot-amigaone.c | ||
| cuboot-bamboo.c | ||
| cuboot-c2k.c | ||
| cuboot-ebony.c | ||
| cuboot-hotfoot.c | ||
| cuboot-katmai.c | ||
| cuboot-kilauea.c | ||
| cuboot-mpc7448hpc2.c | ||
| cuboot-pq2.c | ||
| cuboot-rainier.c | ||
| cuboot-sam440ep.c | ||
| cuboot-sequoia.c | ||
| cuboot-taishan.c | ||
| cuboot-warp.c | ||
| cuboot-yosemite.c | ||
| cuboot.c | ||
| cuboot.h | ||
| dcr.h | ||
| devtree.c | ||
| div64.S | ||
| dummy.c | ||
| ebony.c | ||
| elf_util.c | ||
| elf.h | ||
| ep88xc.c | ||
| ep405.c | ||
| ep8248e.c | ||
| fixed-head.S | ||
| flatdevtree_env.h | ||
| fsl-soc.c | ||
| fsl-soc.h | ||
| gunzip_util.c | ||
| gunzip_util.h | ||
| hack-coff.c | ||
| holly.c | ||
| install.sh | ||
| io.h | ||
| libfdt_env.h | ||
| libfdt-wrapper.c | ||
| main.c | ||
| Makefile | ||
| mktree.c | ||
| mpc8xx.c | ||
| mpc8xx.h | ||
| mpc52xx-psc.c | ||
| mpsc.c | ||
| mv64x60_i2c.c | ||
| mv64x60.c | ||
| mv64x60.h | ||
| ns16550.c | ||
| of.c | ||
| of.h | ||
| ofconsole.c | ||
| oflib.c | ||
| ops.h | ||
| page.h | ||
| planetcore.c | ||
| planetcore.h | ||
| ppc_asm.h | ||
| ppcboot-hotfoot.h | ||
| ppcboot.h | ||
| pq2.c | ||
| pq2.h | ||
| prpmc2800.c | ||
| ps3-head.S | ||
| ps3-hvcall.S | ||
| ps3.c | ||
| README | ||
| redboot-8xx.c | ||
| redboot-83xx.c | ||
| redboot.h | ||
| reg.h | ||
| rs6000.h | ||
| serial.c | ||
| simple_alloc.c | ||
| simpleboot.c | ||
| stdio.c | ||
| stdio.h | ||
| stdlib.c | ||
| stdlib.h | ||
| string.h | ||
| string.S | ||
| treeboot-bamboo.c | ||
| treeboot-ebony.c | ||
| treeboot-walnut.c | ||
| types.h | ||
| uartlite.c | ||
| util.S | ||
| virtex405-head.S | ||
| virtex.c | ||
| wrapper | ||
| zImage.coff.lds.S | ||
| zImage.lds.S | ||
| zImage.ps3.lds.S | ||
To extract the kernel vmlinux, System.map, .config or initrd from the zImage binary: objcopy -j .kernel:vmlinux -O binary zImage vmlinux.gz objcopy -j .kernel:System.map -O binary zImage System.map.gz objcopy -j .kernel:.config -O binary zImage config.gz objcopy -j .kernel:initrd -O binary zImage.initrd initrd.gz Peter