tmp_suning_uos_patched/samples/bpf/Makefile
brakmo a1270fe95b bpf: User program for testing HBM
The program nrm creates a cgroup and attaches a BPF program to the
cgroup for testing HBM (Host Bandwidth Manager) for egress traffic.
One still needs to create network traffic. This can be done through
netesto, netperf or iperf3.
A follow-up patch contains a script to create traffic.

USAGE: hbm [-d] [-l] [-n <id>] [-r <rate>] [-s] [-t <secs>]
           [-w] [-h] [prog]
  Where:
   -d        Print BPF trace debug buffer
   -l        Also limit flows doing loopback
   -n <#>    To create cgroup "/hbm#" and attach prog. Default is /nrm1
             This is convenient when testing HBM in more than 1 cgroup
   -r <rate> Rate limit in Mbps
   -s        Get HBM stats (marked, dropped, etc.)
   -t <time> Exit after specified seconds (deault is 0)
   -w        Work conserving flag. cgroup can increase its bandwidth
             beyond the rate limit specified while there is available
             bandwidth. Current implementation assumes there is only
             NIC (eth0), but can be extended to support multiple NICs.
             Currrently only supported for egress. Note, this is just
	     a proof of concept.
   -h        Print this info
   prog      BPF program file name. Name defaults to hbm_out_kern.o

More information about HBM can be found in the paper "BPF Host Resource
Management" presented at the 2018 Linux Plumbers Conference, Networking Track
(http://vger.kernel.org/lpc_net2018_talks/LPC%20BPF%20Network%20Resource%20Paper.pdf)

Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-02 10:48:27 -08:00

289 lines
9.8 KiB
Makefile

# SPDX-License-Identifier: GPL-2.0
BPF_SAMPLES_PATH ?= $(abspath $(srctree)/$(src))
TOOLS_PATH := $(BPF_SAMPLES_PATH)/../../tools
# List of programs to build
hostprogs-y := test_lru_dist
hostprogs-y += sock_example
hostprogs-y += fds_example
hostprogs-y += sockex1
hostprogs-y += sockex2
hostprogs-y += sockex3
hostprogs-y += tracex1
hostprogs-y += tracex2
hostprogs-y += tracex3
hostprogs-y += tracex4
hostprogs-y += tracex5
hostprogs-y += tracex6
hostprogs-y += tracex7
hostprogs-y += test_probe_write_user
hostprogs-y += trace_output
hostprogs-y += lathist
hostprogs-y += offwaketime
hostprogs-y += spintest
hostprogs-y += map_perf_test
hostprogs-y += test_overhead
hostprogs-y += test_cgrp2_array_pin
hostprogs-y += test_cgrp2_attach
hostprogs-y += test_cgrp2_attach2
hostprogs-y += test_cgrp2_sock
hostprogs-y += test_cgrp2_sock2
hostprogs-y += xdp1
hostprogs-y += xdp2
hostprogs-y += xdp_router_ipv4
hostprogs-y += test_current_task_under_cgroup
hostprogs-y += trace_event
hostprogs-y += sampleip
hostprogs-y += tc_l2_redirect
hostprogs-y += lwt_len_hist
hostprogs-y += xdp_tx_iptunnel
hostprogs-y += test_map_in_map
hostprogs-y += per_socket_stats_example
hostprogs-y += xdp_redirect
hostprogs-y += xdp_redirect_map
hostprogs-y += xdp_redirect_cpu
hostprogs-y += xdp_monitor
hostprogs-y += xdp_rxq_info
hostprogs-y += syscall_tp
hostprogs-y += cpustat
hostprogs-y += xdp_adjust_tail
hostprogs-y += xdpsock
hostprogs-y += xdp_fwd
hostprogs-y += task_fd_query
hostprogs-y += xdp_sample_pkts
hostprogs-y += hbm
# Libbpf dependencies
LIBBPF = $(TOOLS_PATH)/lib/bpf/libbpf.a
CGROUP_HELPERS := ../../tools/testing/selftests/bpf/cgroup_helpers.o
TRACE_HELPERS := ../../tools/testing/selftests/bpf/trace_helpers.o
fds_example-objs := fds_example.o
sockex1-objs := sockex1_user.o
sockex2-objs := sockex2_user.o
sockex3-objs := bpf_load.o sockex3_user.o
tracex1-objs := bpf_load.o tracex1_user.o
tracex2-objs := bpf_load.o tracex2_user.o
tracex3-objs := bpf_load.o tracex3_user.o
tracex4-objs := bpf_load.o tracex4_user.o
tracex5-objs := bpf_load.o tracex5_user.o
tracex6-objs := bpf_load.o tracex6_user.o
tracex7-objs := bpf_load.o tracex7_user.o
test_probe_write_user-objs := bpf_load.o test_probe_write_user_user.o
trace_output-objs := bpf_load.o trace_output_user.o $(TRACE_HELPERS)
lathist-objs := bpf_load.o lathist_user.o
offwaketime-objs := bpf_load.o offwaketime_user.o $(TRACE_HELPERS)
spintest-objs := bpf_load.o spintest_user.o $(TRACE_HELPERS)
map_perf_test-objs := bpf_load.o map_perf_test_user.o
test_overhead-objs := bpf_load.o test_overhead_user.o
test_cgrp2_array_pin-objs := test_cgrp2_array_pin.o
test_cgrp2_attach-objs := test_cgrp2_attach.o
test_cgrp2_attach2-objs := test_cgrp2_attach2.o $(CGROUP_HELPERS)
test_cgrp2_sock-objs := test_cgrp2_sock.o
test_cgrp2_sock2-objs := bpf_load.o test_cgrp2_sock2.o
xdp1-objs := xdp1_user.o
# reuse xdp1 source intentionally
xdp2-objs := xdp1_user.o
xdp_router_ipv4-objs := xdp_router_ipv4_user.o
test_current_task_under_cgroup-objs := bpf_load.o $(CGROUP_HELPERS) \
test_current_task_under_cgroup_user.o
trace_event-objs := bpf_load.o trace_event_user.o $(TRACE_HELPERS)
sampleip-objs := bpf_load.o sampleip_user.o $(TRACE_HELPERS)
tc_l2_redirect-objs := bpf_load.o tc_l2_redirect_user.o
lwt_len_hist-objs := bpf_load.o lwt_len_hist_user.o
xdp_tx_iptunnel-objs := xdp_tx_iptunnel_user.o
test_map_in_map-objs := bpf_load.o test_map_in_map_user.o
per_socket_stats_example-objs := cookie_uid_helper_example.o
xdp_redirect-objs := xdp_redirect_user.o
xdp_redirect_map-objs := xdp_redirect_map_user.o
xdp_redirect_cpu-objs := bpf_load.o xdp_redirect_cpu_user.o
xdp_monitor-objs := bpf_load.o xdp_monitor_user.o
xdp_rxq_info-objs := xdp_rxq_info_user.o
syscall_tp-objs := bpf_load.o syscall_tp_user.o
cpustat-objs := bpf_load.o cpustat_user.o
xdp_adjust_tail-objs := xdp_adjust_tail_user.o
xdpsock-objs := xdpsock_user.o
xdp_fwd-objs := xdp_fwd_user.o
task_fd_query-objs := bpf_load.o task_fd_query_user.o $(TRACE_HELPERS)
xdp_sample_pkts-objs := xdp_sample_pkts_user.o $(TRACE_HELPERS)
hbm-objs := bpf_load.o hbm.o $(CGROUP_HELPERS)
# Tell kbuild to always build the programs
always := $(hostprogs-y)
always += sockex1_kern.o
always += sockex2_kern.o
always += sockex3_kern.o
always += tracex1_kern.o
always += tracex2_kern.o
always += tracex3_kern.o
always += tracex4_kern.o
always += tracex5_kern.o
always += tracex6_kern.o
always += tracex7_kern.o
always += sock_flags_kern.o
always += test_probe_write_user_kern.o
always += trace_output_kern.o
always += tcbpf1_kern.o
always += tc_l2_redirect_kern.o
always += lathist_kern.o
always += offwaketime_kern.o
always += spintest_kern.o
always += map_perf_test_kern.o
always += test_overhead_tp_kern.o
always += test_overhead_raw_tp_kern.o
always += test_overhead_kprobe_kern.o
always += parse_varlen.o parse_simple.o parse_ldabs.o
always += test_cgrp2_tc_kern.o
always += xdp1_kern.o
always += xdp2_kern.o
always += xdp_router_ipv4_kern.o
always += test_current_task_under_cgroup_kern.o
always += trace_event_kern.o
always += sampleip_kern.o
always += lwt_len_hist_kern.o
always += xdp_tx_iptunnel_kern.o
always += test_map_in_map_kern.o
always += cookie_uid_helper_example.o
always += tcp_synrto_kern.o
always += tcp_rwnd_kern.o
always += tcp_bufs_kern.o
always += tcp_cong_kern.o
always += tcp_iw_kern.o
always += tcp_clamp_kern.o
always += tcp_basertt_kern.o
always += tcp_tos_reflect_kern.o
always += xdp_redirect_kern.o
always += xdp_redirect_map_kern.o
always += xdp_redirect_cpu_kern.o
always += xdp_monitor_kern.o
always += xdp_rxq_info_kern.o
always += xdp2skb_meta_kern.o
always += syscall_tp_kern.o
always += cpustat_kern.o
always += xdp_adjust_tail_kern.o
always += xdp_fwd_kern.o
always += task_fd_query_kern.o
always += xdp_sample_pkts_kern.o
always += hbm_out_kern.o
KBUILD_HOSTCFLAGS += -I$(objtree)/usr/include
KBUILD_HOSTCFLAGS += -I$(srctree)/tools/lib/
KBUILD_HOSTCFLAGS += -I$(srctree)/tools/testing/selftests/bpf/
KBUILD_HOSTCFLAGS += -I$(srctree)/tools/lib/ -I$(srctree)/tools/include
KBUILD_HOSTCFLAGS += -I$(srctree)/tools/perf
HOSTCFLAGS_bpf_load.o += -I$(objtree)/usr/include -Wno-unused-variable
HOSTCFLAGS_trace_helpers.o += -I$(srctree)/tools/lib/bpf/
HOSTCFLAGS_trace_output_user.o += -I$(srctree)/tools/lib/bpf/
HOSTCFLAGS_offwaketime_user.o += -I$(srctree)/tools/lib/bpf/
HOSTCFLAGS_spintest_user.o += -I$(srctree)/tools/lib/bpf/
HOSTCFLAGS_trace_event_user.o += -I$(srctree)/tools/lib/bpf/
HOSTCFLAGS_sampleip_user.o += -I$(srctree)/tools/lib/bpf/
HOSTCFLAGS_task_fd_query_user.o += -I$(srctree)/tools/lib/bpf/
HOSTCFLAGS_xdp_sample_pkts_user.o += -I$(srctree)/tools/lib/bpf/
KBUILD_HOSTLDLIBS += $(LIBBPF) -lelf
HOSTLDLIBS_tracex4 += -lrt
HOSTLDLIBS_trace_output += -lrt
HOSTLDLIBS_map_perf_test += -lrt
HOSTLDLIBS_test_overhead += -lrt
HOSTLDLIBS_xdpsock += -pthread
# Allows pointing LLC/CLANG to a LLVM backend with bpf support, redefine on cmdline:
# make samples/bpf/ LLC=~/git/llvm/build/bin/llc CLANG=~/git/llvm/build/bin/clang
LLC ?= llc
CLANG ?= clang
LLVM_OBJCOPY ?= llvm-objcopy
BTF_PAHOLE ?= pahole
# Detect that we're cross compiling and use the cross compiler
ifdef CROSS_COMPILE
HOSTCC = $(CROSS_COMPILE)gcc
CLANG_ARCH_ARGS = -target $(ARCH)
endif
BTF_LLC_PROBE := $(shell $(LLC) -march=bpf -mattr=help 2>&1 | grep dwarfris)
BTF_PAHOLE_PROBE := $(shell $(BTF_PAHOLE) --help 2>&1 | grep BTF)
BTF_OBJCOPY_PROBE := $(shell $(LLVM_OBJCOPY) --help 2>&1 | grep -i 'usage.*llvm')
BTF_LLVM_PROBE := $(shell echo "int main() { return 0; }" | \
$(CLANG) -target bpf -O2 -g -c -x c - -o ./llvm_btf_verify.o; \
readelf -S ./llvm_btf_verify.o | grep BTF; \
/bin/rm -f ./llvm_btf_verify.o)
ifneq ($(BTF_LLVM_PROBE),)
EXTRA_CFLAGS += -g
else
ifneq ($(and $(BTF_LLC_PROBE),$(BTF_PAHOLE_PROBE),$(BTF_OBJCOPY_PROBE)),)
EXTRA_CFLAGS += -g
LLC_FLAGS += -mattr=dwarfris
DWARF2BTF = y
endif
endif
# Trick to allow make to be run from this directory
all:
$(MAKE) -C ../../ $(CURDIR)/ BPF_SAMPLES_PATH=$(CURDIR)
clean:
$(MAKE) -C ../../ M=$(CURDIR) clean
@rm -f *~
$(LIBBPF): FORCE
# Fix up variables inherited from Kbuild that tools/ build system won't like
$(MAKE) -C $(dir $@) RM='rm -rf' LDFLAGS= srctree=$(BPF_SAMPLES_PATH)/../../ O=
$(obj)/syscall_nrs.h: $(obj)/syscall_nrs.s FORCE
$(call filechk,offsets,__SYSCALL_NRS_H__)
targets += syscall_nrs.s
clean-files += syscall_nrs.h
FORCE:
# Verify LLVM compiler tools are available and bpf target is supported by llc
.PHONY: verify_cmds verify_target_bpf $(CLANG) $(LLC)
verify_cmds: $(CLANG) $(LLC)
@for TOOL in $^ ; do \
if ! (which -- "$${TOOL}" > /dev/null 2>&1); then \
echo "*** ERROR: Cannot find LLVM tool $${TOOL}" ;\
exit 1; \
else true; fi; \
done
verify_target_bpf: verify_cmds
@if ! (${LLC} -march=bpf -mattr=help > /dev/null 2>&1); then \
echo "*** ERROR: LLVM (${LLC}) does not support 'bpf' target" ;\
echo " NOTICE: LLVM version >= 3.7.1 required" ;\
exit 2; \
else true; fi
$(BPF_SAMPLES_PATH)/*.c: verify_target_bpf $(LIBBPF)
$(src)/*.c: verify_target_bpf $(LIBBPF)
$(obj)/tracex5_kern.o: $(obj)/syscall_nrs.h
$(obj)/hbm_out_kern.o: $(src)/hbm.h $(src)/hbm_kern.h
$(obj)/hbm.o: $(src)/hbm.h
# asm/sysreg.h - inline assembly used by it is incompatible with llvm.
# But, there is no easy way to fix it, so just exclude it since it is
# useless for BPF samples.
$(obj)/%.o: $(src)/%.c
@echo " CLANG-bpf " $@
$(Q)$(CLANG) $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(EXTRA_CFLAGS) -I$(obj) \
-I$(srctree)/tools/testing/selftests/bpf/ \
-D__KERNEL__ -D__BPF_TRACING__ -Wno-unused-value -Wno-pointer-sign \
-D__TARGET_ARCH_$(ARCH) -Wno-compare-distinct-pointer-types \
-Wno-gnu-variable-sized-type-not-at-end \
-Wno-address-of-packed-member -Wno-tautological-compare \
-Wno-unknown-warning-option $(CLANG_ARCH_ARGS) \
-I$(srctree)/samples/bpf/ -include asm_goto_workaround.h \
-O2 -emit-llvm -c $< -o -| $(LLC) -march=bpf $(LLC_FLAGS) -filetype=obj -o $@
ifeq ($(DWARF2BTF),y)
$(BTF_PAHOLE) -J $@
endif