..
8250
serial: 8250: Clean up the locking for -rt
2014-03-08 22:24:53 -08:00
cpm_uart
tty: delete non-required instances of include <linux/init.h>
2014-01-07 17:05:21 -08:00
jsm
21285.c
68328serial.c
altera_jtaguart.c
altera_uart.c
amba-pl010.c
serial: pl010: Convert to modern PM ops
2013-12-08 17:09:07 -08:00
amba-pl011.c
serial: pl011: Move uart_register_driver call to device probe
2014-02-13 10:33:00 -08:00
apbuart.c
apbuart.h
ar933x_uart.c
arc_uart.c
serial: arc_uart: Remove casting the return value which is a void pointer
2013-09-26 14:29:58 -07:00
atmel_serial.c
ARM: SoC: cleanups for 3.15
2014-04-05 13:51:19 -07:00
bcm63xx_uart.c
tty: serial: bcm63xx_uart: add support for DT probing
2014-02-28 16:27:18 -08:00
bfin_sport_uart.c
serial: bfin_sport_uart: Remove casting the return value which is a void pointer
2013-09-26 14:29:58 -07:00
bfin_sport_uart.h
bfin_uart.c
tty: Remove unnecessary semicolons
2013-10-16 13:08:16 -07:00
clps711x.c
Revert "serial: clps711x: Give a chance to perform useful tasks during wait loop"
2014-04-16 14:17:44 -07:00
crisv10.c
tty: serial: crisv10: Drop remaining code for CRISv10 CPU simulator
2014-02-15 12:16:21 -08:00
crisv10.h
dz.c
dz.h
efm32-uart.c
serial: efm32: use $vendor,$device scheme for compatible string
2014-04-16 14:17:43 -07:00
fsl_lpuart.c
serial: fsl_lpuart: add DMA support
2014-02-18 12:50:26 -08:00
icom.c
serial: icom: dereference after free in load_code()
2013-12-08 17:16:05 -08:00
icom.h
ifx6x60.c
serial: ifx6x60: Remove casting the return value which is a void pointer
2013-09-26 14:29:58 -07:00
ifx6x60.h
imx.c
serial: imx: Remove init() and exit() platform callbacks
2014-02-28 16:36:45 -08:00
ioc3_serial.c
ioc4_serial.c
ip22zilog.c
tty: Remove unnecessary semicolons
2013-10-16 13:08:16 -07:00
ip22zilog.h
Kconfig
serial: timberdale: Depend on X86_32
2014-04-16 14:17:44 -07:00
kgdb_nmi.c
tty: delete non-required instances of include <linux/init.h>
2014-01-07 17:05:21 -08:00
kgdboc.c
lantiq.c
lpc32xx_hs.c
m32r_sio_reg.h
m32r_sio.c
m32r_sio.h
Makefile
serial: Remove old SC26XX driver
2013-12-19 12:34:30 -08:00
max310x.c
serial: max310x: Add missing #include <linux/uaccess.h>
2014-03-17 16:13:23 -07:00
max3100.c
mcf.c
mfd.c
serial: mfd: Staticize local symbols
2013-10-29 16:34:11 -07:00
mpc52xx_uart.c
serial: mpc512x: setup the PSC FIFO clock as well
2014-01-12 18:53:05 +01:00
mpsc.c
serial: mpsc: Remove casting the return value which is a void pointer
2013-09-26 14:29:58 -07:00
mrst_max3110.c
mrst_max3110: fix unbalanced IRQ issue during resume
2013-10-29 16:26:54 -07:00
mrst_max3110.h
msm_serial_hs.c
msm_serial.c
msm_serial: Add support for poll_{get,put}_char()
2014-02-12 11:34:23 -08:00
msm_serial.h
msm_serial: Add support for poll_{get,put}_char()
2014-02-12 11:34:23 -08:00
msm_smd_tty.c
mux.c
mxs-auart.c
tty: serial: mxs-auart: Check the return value from clk_prepare_enable()
2013-12-08 17:14:58 -08:00
netx-serial.c
nwpserial.c
of_serial.c
tty: delete non-required instances of include <linux/init.h>
2014-01-07 17:05:21 -08:00
omap-serial.c
serial: omap: free the wakeup settings in remove
2014-04-16 14:15:01 -07:00
pch_uart.c
serial: pch_uart: Fix build warning when CONFIG_DEBUG_FS=n
2014-02-13 09:17:31 -08:00
pmac_zilog.c
TTY: pmac_zilog, check existence of ports in pmz_console_init()
2013-11-25 08:54:25 -08:00
pmac_zilog.h
pnx8xxx_uart.c
pxa.c
rp2.c
tty: remove DEFINE_PCI_DEVICE_TABLE macro
2013-12-08 17:09:07 -08:00
sa1100.c
serial: sa1100: delete .set_wake callback
2013-10-16 13:16:18 -07:00
samsung.c
serial: samsung: Move uart_register_driver call to device probe
2014-02-13 10:32:59 -08:00
samsung.h
serial: samsung: Remove casting the return value which is a void pointer
2013-09-26 14:29:59 -07:00
sb1250-duart.c
sccnxp.c
serial: sccnxp: missing uart_unregister_driver() on error in sccnxp_probe()
2013-09-26 15:44:45 -07:00
serial_core.c
serial_core: Fix conditional start_tx on ring buffer not empty
2014-04-16 14:17:43 -07:00
serial_ks8695.c
serial_txx9.c
serial: txx9: remove unnecessary pci_set_drvdata()
2013-09-26 15:41:38 -07:00
serial-tegra.c
serial: tegra: convert to standard DMA DT bindings
2013-12-11 16:44:35 -07:00
sh-sci.c
TTY/Serial driver update for 3.15-rc1
2014-04-01 16:55:57 -07:00
sh-sci.h
serial: sh-sci: Move overrun_bit and error_mask fields out of pdata
2013-12-24 11:17:48 +09:00
sirfsoc_uart.c
serial: sirf: move to use generic dma dt-binding to get dma channels
2014-02-13 10:36:25 -08:00
sirfsoc_uart.h
serial: sirf: move to use generic dma dt-binding to get dma channels
2014-02-13 10:36:25 -08:00
sn_console.c
st-asc.c
serial: st-asc: Fix SysRq char handling
2014-04-16 14:17:44 -07:00
suncore.c
sunhv.c
sparc: serial: Clean up the locking for -rt
2014-03-06 16:32:25 -05:00
sunsab.c
sparc: serial: Clean up the locking for -rt
2014-03-06 16:32:25 -05:00
sunsab.h
sunsu.c
sparc: serial: Clean up the locking for -rt
2014-03-06 16:32:25 -05:00
sunzilog.c
sparc: serial: Clean up the locking for -rt
2014-03-06 16:32:25 -05:00
sunzilog.h
tilegx.c
timbuart.c
timbuart.h
uartlite.c
ucc_uart.c
DeviceTree updates for 3.13. This is a bit larger pull request than
2013-11-12 16:52:17 +09:00
vr41xx_siu.c
vt8500_serial.c
serial: vt8500: add missing braces
2013-10-16 13:22:16 -07:00
xilinx_uartps.c
tty: xuartps: Properly guard sysrq specific code
2013-12-17 16:02:25 -08:00
zs.c
zs.h