a0607fd3a2
Not as fancy as coccinelle. Checkpatch errors ignored.
Compile tested allyesconfig x86, not all files compiled.
grep -rPl --include=*.[ch] "\brequest_irq\s*\([^,\)]+,\s*\&" drivers/net | while read file ; do \
perl -i -e 'local $/; while (<>) { s@(\brequest_irq\s*\([^,\)]+,\s*)\&@\1@g ; print ; }' $file ;\
done
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
632 lines
18 KiB
C
632 lines
18 KiB
C
/* mac89x0.c: A Crystal Semiconductor CS89[02]0 driver for linux. */
|
|
/*
|
|
Written 1996 by Russell Nelson, with reference to skeleton.c
|
|
written 1993-1994 by Donald Becker.
|
|
|
|
This software may be used and distributed according to the terms
|
|
of the GNU General Public License, incorporated herein by reference.
|
|
|
|
The author may be reached at nelson@crynwr.com, Crynwr
|
|
Software, 11 Grant St., Potsdam, NY 13676
|
|
|
|
Changelog:
|
|
|
|
Mike Cruse : mcruse@cti-ltd.com
|
|
: Changes for Linux 2.0 compatibility.
|
|
: Added dev_id parameter in net_interrupt(),
|
|
: request_irq() and free_irq(). Just NULL for now.
|
|
|
|
Mike Cruse : Added MOD_INC_USE_COUNT and MOD_DEC_USE_COUNT macros
|
|
: in net_open() and net_close() so kerneld would know
|
|
: that the module is in use and wouldn't eject the
|
|
: driver prematurely.
|
|
|
|
Mike Cruse : Rewrote init_module() and cleanup_module using 8390.c
|
|
: as an example. Disabled autoprobing in init_module(),
|
|
: not a good thing to do to other devices while Linux
|
|
: is running from all accounts.
|
|
|
|
Alan Cox : Removed 1.2 support, added 2.1 extra counters.
|
|
|
|
David Huggins-Daines <dhd@debian.org>
|
|
|
|
Split this off into mac89x0.c, and gutted it of all parts which are
|
|
not relevant to the existing CS8900 cards on the Macintosh
|
|
(i.e. basically the Daynaport CS and LC cards). To be precise:
|
|
|
|
* Removed all the media-detection stuff, because these cards are
|
|
TP-only.
|
|
|
|
* Lobotomized the ISA interrupt bogosity, because these cards use
|
|
a hardwired NuBus interrupt and a magic ISAIRQ value in the card.
|
|
|
|
* Basically eliminated everything not relevant to getting the
|
|
cards minimally functioning on the Macintosh.
|
|
|
|
I might add that these cards are badly designed even from the Mac
|
|
standpoint, in that Dayna, in their infinite wisdom, used NuBus slot
|
|
I/O space and NuBus interrupts for these cards, but neglected to
|
|
provide anything even remotely resembling a NuBus ROM. Therefore we
|
|
have to probe for them in a brain-damaged ISA-like fashion.
|
|
|
|
Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 11/01/2001
|
|
check kmalloc and release the allocated memory on failure in
|
|
mac89x0_probe and in init_module
|
|
use local_irq_{save,restore}(flags) in net_get_stat, not just
|
|
local_irq_{dis,en}able()
|
|
*/
|
|
|
|
static char *version =
|
|
"cs89x0.c:v1.02 11/26/96 Russell Nelson <nelson@crynwr.com>\n";
|
|
|
|
/* ======================= configure the driver here ======================= */
|
|
|
|
/* use 0 for production, 1 for verification, >2 for debug */
|
|
#ifndef NET_DEBUG
|
|
#define NET_DEBUG 0
|
|
#endif
|
|
|
|
/* ======================= end of configuration ======================= */
|
|
|
|
|
|
/* Always include 'config.h' first in case the user wants to turn on
|
|
or override something. */
|
|
#include <linux/module.h>
|
|
|
|
/*
|
|
Sources:
|
|
|
|
Crynwr packet driver epktisa.
|
|
|
|
Crystal Semiconductor data sheets.
|
|
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/fcntl.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/in.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/nubus.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/io.h>
|
|
#include <asm/hwtest.h>
|
|
#include <asm/macints.h>
|
|
|
|
#include "cs89x0.h"
|
|
|
|
static unsigned int net_debug = NET_DEBUG;
|
|
|
|
/* Information that need to be kept for each board. */
|
|
struct net_local {
|
|
struct net_device_stats stats;
|
|
int chip_type; /* one of: CS8900, CS8920, CS8920M */
|
|
char chip_revision; /* revision letter of the chip ('A'...) */
|
|
int send_cmd; /* the propercommand used to send a packet. */
|
|
int rx_mode;
|
|
int curr_rx_cfg;
|
|
int send_underrun; /* keep track of how many underruns in a row we get */
|
|
struct sk_buff *skb;
|
|
};
|
|
|
|
/* Index to functions, as function prototypes. */
|
|
|
|
#if 0
|
|
extern void reset_chip(struct net_device *dev);
|
|
#endif
|
|
static int net_open(struct net_device *dev);
|
|
static int net_send_packet(struct sk_buff *skb, struct net_device *dev);
|
|
static irqreturn_t net_interrupt(int irq, void *dev_id);
|
|
static void set_multicast_list(struct net_device *dev);
|
|
static void net_rx(struct net_device *dev);
|
|
static int net_close(struct net_device *dev);
|
|
static struct net_device_stats *net_get_stats(struct net_device *dev);
|
|
static int set_mac_address(struct net_device *dev, void *addr);
|
|
|
|
|
|
/* Example routines you must write ;->. */
|
|
#define tx_done(dev) 1
|
|
|
|
/* For reading/writing registers ISA-style */
|
|
static inline int
|
|
readreg_io(struct net_device *dev, int portno)
|
|
{
|
|
nubus_writew(swab16(portno), dev->base_addr + ADD_PORT);
|
|
return swab16(nubus_readw(dev->base_addr + DATA_PORT));
|
|
}
|
|
|
|
static inline void
|
|
writereg_io(struct net_device *dev, int portno, int value)
|
|
{
|
|
nubus_writew(swab16(portno), dev->base_addr + ADD_PORT);
|
|
nubus_writew(swab16(value), dev->base_addr + DATA_PORT);
|
|
}
|
|
|
|
/* These are for reading/writing registers in shared memory */
|
|
static inline int
|
|
readreg(struct net_device *dev, int portno)
|
|
{
|
|
return swab16(nubus_readw(dev->mem_start + portno));
|
|
}
|
|
|
|
static inline void
|
|
writereg(struct net_device *dev, int portno, int value)
|
|
{
|
|
nubus_writew(swab16(value), dev->mem_start + portno);
|
|
}
|
|
|
|
static const struct net_device_ops mac89x0_netdev_ops = {
|
|
.ndo_open = net_open,
|
|
.ndo_stop = net_close,
|
|
.ndo_start_xmit = net_send_packet,
|
|
.ndo_get_stats = net_get_stats,
|
|
.ndo_set_multicast_list = set_multicast_list,
|
|
.ndo_set_mac_address = set_mac_address,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_change_mtu = eth_change_mtu,
|
|
};
|
|
|
|
/* Probe for the CS8900 card in slot E. We won't bother looking
|
|
anywhere else until we have a really good reason to do so. */
|
|
struct net_device * __init mac89x0_probe(int unit)
|
|
{
|
|
struct net_device *dev;
|
|
static int once_is_enough;
|
|
struct net_local *lp;
|
|
static unsigned version_printed;
|
|
int i, slot;
|
|
unsigned rev_type = 0;
|
|
unsigned long ioaddr;
|
|
unsigned short sig;
|
|
int err = -ENODEV;
|
|
|
|
if (!MACH_IS_MAC)
|
|
return ERR_PTR(-ENODEV);
|
|
|
|
dev = alloc_etherdev(sizeof(struct net_local));
|
|
if (!dev)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
if (unit >= 0) {
|
|
sprintf(dev->name, "eth%d", unit);
|
|
netdev_boot_setup_check(dev);
|
|
}
|
|
|
|
if (once_is_enough)
|
|
goto out;
|
|
once_is_enough = 1;
|
|
|
|
/* We might have to parameterize this later */
|
|
slot = 0xE;
|
|
/* Get out now if there's a real NuBus card in slot E */
|
|
if (nubus_find_slot(slot, NULL) != NULL)
|
|
goto out;
|
|
|
|
/* The pseudo-ISA bits always live at offset 0x300 (gee,
|
|
wonder why...) */
|
|
ioaddr = (unsigned long)
|
|
nubus_slot_addr(slot) | (((slot&0xf) << 20) + DEFAULTIOBASE);
|
|
{
|
|
unsigned long flags;
|
|
int card_present;
|
|
|
|
local_irq_save(flags);
|
|
card_present = hwreg_present((void*) ioaddr+4)
|
|
&& hwreg_present((void*) ioaddr + DATA_PORT);
|
|
local_irq_restore(flags);
|
|
|
|
if (!card_present)
|
|
goto out;
|
|
}
|
|
|
|
nubus_writew(0, ioaddr + ADD_PORT);
|
|
sig = nubus_readw(ioaddr + DATA_PORT);
|
|
if (sig != swab16(CHIP_EISA_ID_SIG))
|
|
goto out;
|
|
|
|
/* Initialize the net_device structure. */
|
|
lp = netdev_priv(dev);
|
|
|
|
/* Fill in the 'dev' fields. */
|
|
dev->base_addr = ioaddr;
|
|
dev->mem_start = (unsigned long)
|
|
nubus_slot_addr(slot) | (((slot&0xf) << 20) + MMIOBASE);
|
|
dev->mem_end = dev->mem_start + 0x1000;
|
|
|
|
/* Turn on shared memory */
|
|
writereg_io(dev, PP_BusCTL, MEMORY_ON);
|
|
|
|
/* get the chip type */
|
|
rev_type = readreg(dev, PRODUCT_ID_ADD);
|
|
lp->chip_type = rev_type &~ REVISON_BITS;
|
|
lp->chip_revision = ((rev_type & REVISON_BITS) >> 8) + 'A';
|
|
|
|
/* Check the chip type and revision in order to set the correct send command
|
|
CS8920 revision C and CS8900 revision F can use the faster send. */
|
|
lp->send_cmd = TX_AFTER_381;
|
|
if (lp->chip_type == CS8900 && lp->chip_revision >= 'F')
|
|
lp->send_cmd = TX_NOW;
|
|
if (lp->chip_type != CS8900 && lp->chip_revision >= 'C')
|
|
lp->send_cmd = TX_NOW;
|
|
|
|
if (net_debug && version_printed++ == 0)
|
|
printk(version);
|
|
|
|
printk(KERN_INFO "%s: cs89%c0%s rev %c found at %#8lx",
|
|
dev->name,
|
|
lp->chip_type==CS8900?'0':'2',
|
|
lp->chip_type==CS8920M?"M":"",
|
|
lp->chip_revision,
|
|
dev->base_addr);
|
|
|
|
/* Try to read the MAC address */
|
|
if ((readreg(dev, PP_SelfST) & (EEPROM_PRESENT | EEPROM_OK)) == 0) {
|
|
printk("\nmac89x0: No EEPROM, giving up now.\n");
|
|
goto out1;
|
|
} else {
|
|
for (i = 0; i < ETH_ALEN; i += 2) {
|
|
/* Big-endian (why??!) */
|
|
unsigned short s = readreg(dev, PP_IA + i);
|
|
dev->dev_addr[i] = s >> 8;
|
|
dev->dev_addr[i+1] = s & 0xff;
|
|
}
|
|
}
|
|
|
|
dev->irq = SLOT2IRQ(slot);
|
|
|
|
/* print the IRQ and ethernet address. */
|
|
|
|
printk(" IRQ %d ADDR %pM\n", dev->irq, dev->dev_addr);
|
|
|
|
dev->netdev_ops = &mac89x0_netdev_ops;
|
|
|
|
err = register_netdev(dev);
|
|
if (err)
|
|
goto out1;
|
|
return NULL;
|
|
out1:
|
|
nubus_writew(0, dev->base_addr + ADD_PORT);
|
|
out:
|
|
free_netdev(dev);
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
#if 0
|
|
/* This is useful for something, but I don't know what yet. */
|
|
void __init reset_chip(struct net_device *dev)
|
|
{
|
|
int reset_start_time;
|
|
|
|
writereg(dev, PP_SelfCTL, readreg(dev, PP_SelfCTL) | POWER_ON_RESET);
|
|
|
|
/* wait 30 ms */
|
|
msleep_interruptible(30);
|
|
|
|
/* Wait until the chip is reset */
|
|
reset_start_time = jiffies;
|
|
while( (readreg(dev, PP_SelfST) & INIT_DONE) == 0 && jiffies - reset_start_time < 2)
|
|
;
|
|
}
|
|
#endif
|
|
|
|
/* Open/initialize the board. This is called (in the current kernel)
|
|
sometime after booting when the 'ifconfig' program is run.
|
|
|
|
This routine should set everything up anew at each open, even
|
|
registers that "should" only need to be set once at boot, so that
|
|
there is non-reboot way to recover if something goes wrong.
|
|
*/
|
|
static int
|
|
net_open(struct net_device *dev)
|
|
{
|
|
struct net_local *lp = netdev_priv(dev);
|
|
int i;
|
|
|
|
/* Disable the interrupt for now */
|
|
writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) & ~ENABLE_IRQ);
|
|
|
|
/* Grab the interrupt */
|
|
if (request_irq(dev->irq, net_interrupt, 0, "cs89x0", dev))
|
|
return -EAGAIN;
|
|
|
|
/* Set up the IRQ - Apparently magic */
|
|
if (lp->chip_type == CS8900)
|
|
writereg(dev, PP_CS8900_ISAINT, 0);
|
|
else
|
|
writereg(dev, PP_CS8920_ISAINT, 0);
|
|
|
|
/* set the Ethernet address */
|
|
for (i=0; i < ETH_ALEN/2; i++)
|
|
writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
|
|
|
|
/* Turn on both receive and transmit operations */
|
|
writereg(dev, PP_LineCTL, readreg(dev, PP_LineCTL) | SERIAL_RX_ON | SERIAL_TX_ON);
|
|
|
|
/* Receive only error free packets addressed to this card */
|
|
lp->rx_mode = 0;
|
|
writereg(dev, PP_RxCTL, DEF_RX_ACCEPT);
|
|
|
|
lp->curr_rx_cfg = RX_OK_ENBL | RX_CRC_ERROR_ENBL;
|
|
|
|
writereg(dev, PP_RxCFG, lp->curr_rx_cfg);
|
|
|
|
writereg(dev, PP_TxCFG, TX_LOST_CRS_ENBL | TX_SQE_ERROR_ENBL | TX_OK_ENBL |
|
|
TX_LATE_COL_ENBL | TX_JBR_ENBL | TX_ANY_COL_ENBL | TX_16_COL_ENBL);
|
|
|
|
writereg(dev, PP_BufCFG, READY_FOR_TX_ENBL | RX_MISS_COUNT_OVRFLOW_ENBL |
|
|
TX_COL_COUNT_OVRFLOW_ENBL | TX_UNDERRUN_ENBL);
|
|
|
|
/* now that we've got our act together, enable everything */
|
|
writereg(dev, PP_BusCTL, readreg(dev, PP_BusCTL) | ENABLE_IRQ);
|
|
netif_start_queue(dev);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
net_send_packet(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct net_local *lp = netdev_priv(dev);
|
|
unsigned long flags;
|
|
|
|
if (net_debug > 3)
|
|
printk("%s: sent %d byte packet of type %x\n",
|
|
dev->name, skb->len,
|
|
(skb->data[ETH_ALEN+ETH_ALEN] << 8)
|
|
| skb->data[ETH_ALEN+ETH_ALEN+1]);
|
|
|
|
/* keep the upload from being interrupted, since we
|
|
ask the chip to start transmitting before the
|
|
whole packet has been completely uploaded. */
|
|
local_irq_save(flags);
|
|
netif_stop_queue(dev);
|
|
|
|
/* initiate a transmit sequence */
|
|
writereg(dev, PP_TxCMD, lp->send_cmd);
|
|
writereg(dev, PP_TxLength, skb->len);
|
|
|
|
/* Test to see if the chip has allocated memory for the packet */
|
|
if ((readreg(dev, PP_BusST) & READY_FOR_TX_NOW) == 0) {
|
|
/* Gasp! It hasn't. But that shouldn't happen since
|
|
we're waiting for TxOk, so return 1 and requeue this packet. */
|
|
local_irq_restore(flags);
|
|
return NETDEV_TX_BUSY;
|
|
}
|
|
|
|
/* Write the contents of the packet */
|
|
skb_copy_from_linear_data(skb, (void *)(dev->mem_start + PP_TxFrame),
|
|
skb->len+1);
|
|
|
|
local_irq_restore(flags);
|
|
dev->trans_start = jiffies;
|
|
dev_kfree_skb (skb);
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/* The typical workload of the driver:
|
|
Handle the network interface interrupts. */
|
|
static irqreturn_t net_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct net_local *lp;
|
|
int ioaddr, status;
|
|
|
|
if (dev == NULL) {
|
|
printk ("net_interrupt(): irq %d for unknown device.\n", irq);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
ioaddr = dev->base_addr;
|
|
lp = netdev_priv(dev);
|
|
|
|
/* we MUST read all the events out of the ISQ, otherwise we'll never
|
|
get interrupted again. As a consequence, we can't have any limit
|
|
on the number of times we loop in the interrupt handler. The
|
|
hardware guarantees that eventually we'll run out of events. Of
|
|
course, if you're on a slow machine, and packets are arriving
|
|
faster than you can read them off, you're screwed. Hasta la
|
|
vista, baby! */
|
|
while ((status = swab16(nubus_readw(dev->base_addr + ISQ_PORT)))) {
|
|
if (net_debug > 4)printk("%s: event=%04x\n", dev->name, status);
|
|
switch(status & ISQ_EVENT_MASK) {
|
|
case ISQ_RECEIVER_EVENT:
|
|
/* Got a packet(s). */
|
|
net_rx(dev);
|
|
break;
|
|
case ISQ_TRANSMITTER_EVENT:
|
|
lp->stats.tx_packets++;
|
|
netif_wake_queue(dev);
|
|
if ((status & TX_OK) == 0) lp->stats.tx_errors++;
|
|
if (status & TX_LOST_CRS) lp->stats.tx_carrier_errors++;
|
|
if (status & TX_SQE_ERROR) lp->stats.tx_heartbeat_errors++;
|
|
if (status & TX_LATE_COL) lp->stats.tx_window_errors++;
|
|
if (status & TX_16_COL) lp->stats.tx_aborted_errors++;
|
|
break;
|
|
case ISQ_BUFFER_EVENT:
|
|
if (status & READY_FOR_TX) {
|
|
/* we tried to transmit a packet earlier,
|
|
but inexplicably ran out of buffers.
|
|
That shouldn't happen since we only ever
|
|
load one packet. Shrug. Do the right
|
|
thing anyway. */
|
|
netif_wake_queue(dev);
|
|
}
|
|
if (status & TX_UNDERRUN) {
|
|
if (net_debug > 0) printk("%s: transmit underrun\n", dev->name);
|
|
lp->send_underrun++;
|
|
if (lp->send_underrun == 3) lp->send_cmd = TX_AFTER_381;
|
|
else if (lp->send_underrun == 6) lp->send_cmd = TX_AFTER_ALL;
|
|
}
|
|
break;
|
|
case ISQ_RX_MISS_EVENT:
|
|
lp->stats.rx_missed_errors += (status >>6);
|
|
break;
|
|
case ISQ_TX_COL_EVENT:
|
|
lp->stats.collisions += (status >>6);
|
|
break;
|
|
}
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* We have a good packet(s), get it/them out of the buffers. */
|
|
static void
|
|
net_rx(struct net_device *dev)
|
|
{
|
|
struct net_local *lp = netdev_priv(dev);
|
|
struct sk_buff *skb;
|
|
int status, length;
|
|
|
|
status = readreg(dev, PP_RxStatus);
|
|
if ((status & RX_OK) == 0) {
|
|
lp->stats.rx_errors++;
|
|
if (status & RX_RUNT) lp->stats.rx_length_errors++;
|
|
if (status & RX_EXTRA_DATA) lp->stats.rx_length_errors++;
|
|
if (status & RX_CRC_ERROR) if (!(status & (RX_EXTRA_DATA|RX_RUNT)))
|
|
/* per str 172 */
|
|
lp->stats.rx_crc_errors++;
|
|
if (status & RX_DRIBBLE) lp->stats.rx_frame_errors++;
|
|
return;
|
|
}
|
|
|
|
length = readreg(dev, PP_RxLength);
|
|
/* Malloc up new buffer. */
|
|
skb = alloc_skb(length, GFP_ATOMIC);
|
|
if (skb == NULL) {
|
|
printk("%s: Memory squeeze, dropping packet.\n", dev->name);
|
|
lp->stats.rx_dropped++;
|
|
return;
|
|
}
|
|
skb_put(skb, length);
|
|
|
|
skb_copy_to_linear_data(skb, (void *)(dev->mem_start + PP_RxFrame),
|
|
length);
|
|
|
|
if (net_debug > 3)printk("%s: received %d byte packet of type %x\n",
|
|
dev->name, length,
|
|
(skb->data[ETH_ALEN+ETH_ALEN] << 8)
|
|
| skb->data[ETH_ALEN+ETH_ALEN+1]);
|
|
|
|
skb->protocol=eth_type_trans(skb,dev);
|
|
netif_rx(skb);
|
|
lp->stats.rx_packets++;
|
|
lp->stats.rx_bytes += length;
|
|
}
|
|
|
|
/* The inverse routine to net_open(). */
|
|
static int
|
|
net_close(struct net_device *dev)
|
|
{
|
|
|
|
writereg(dev, PP_RxCFG, 0);
|
|
writereg(dev, PP_TxCFG, 0);
|
|
writereg(dev, PP_BufCFG, 0);
|
|
writereg(dev, PP_BusCTL, 0);
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
free_irq(dev->irq, dev);
|
|
|
|
/* Update the statistics here. */
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
/* Get the current statistics. This may be called with the card open or
|
|
closed. */
|
|
static struct net_device_stats *
|
|
net_get_stats(struct net_device *dev)
|
|
{
|
|
struct net_local *lp = netdev_priv(dev);
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
/* Update the statistics from the device registers. */
|
|
lp->stats.rx_missed_errors += (readreg(dev, PP_RxMiss) >> 6);
|
|
lp->stats.collisions += (readreg(dev, PP_TxCol) >> 6);
|
|
local_irq_restore(flags);
|
|
|
|
return &lp->stats;
|
|
}
|
|
|
|
static void set_multicast_list(struct net_device *dev)
|
|
{
|
|
struct net_local *lp = netdev_priv(dev);
|
|
|
|
if(dev->flags&IFF_PROMISC)
|
|
{
|
|
lp->rx_mode = RX_ALL_ACCEPT;
|
|
}
|
|
else if((dev->flags&IFF_ALLMULTI)||dev->mc_list)
|
|
{
|
|
/* The multicast-accept list is initialized to accept-all, and we
|
|
rely on higher-level filtering for now. */
|
|
lp->rx_mode = RX_MULTCAST_ACCEPT;
|
|
}
|
|
else
|
|
lp->rx_mode = 0;
|
|
|
|
writereg(dev, PP_RxCTL, DEF_RX_ACCEPT | lp->rx_mode);
|
|
|
|
/* in promiscuous mode, we accept errored packets, so we have to enable interrupts on them also */
|
|
writereg(dev, PP_RxCFG, lp->curr_rx_cfg |
|
|
(lp->rx_mode == RX_ALL_ACCEPT? (RX_CRC_ERROR_ENBL|RX_RUNT_ENBL|RX_EXTRA_DATA_ENBL) : 0));
|
|
}
|
|
|
|
|
|
static int set_mac_address(struct net_device *dev, void *addr)
|
|
{
|
|
int i;
|
|
printk("%s: Setting MAC address to ", dev->name);
|
|
for (i = 0; i < 6; i++)
|
|
printk(" %2.2x", dev->dev_addr[i] = ((unsigned char *)addr)[i]);
|
|
printk(".\n");
|
|
/* set the Ethernet address */
|
|
for (i=0; i < ETH_ALEN/2; i++)
|
|
writereg(dev, PP_IA+i*2, dev->dev_addr[i*2] | (dev->dev_addr[i*2+1] << 8));
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef MODULE
|
|
|
|
static struct net_device *dev_cs89x0;
|
|
static int debug;
|
|
|
|
module_param(debug, int, 0);
|
|
MODULE_PARM_DESC(debug, "CS89[02]0 debug level (0-5)");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
int __init
|
|
init_module(void)
|
|
{
|
|
net_debug = debug;
|
|
dev_cs89x0 = mac89x0_probe(-1);
|
|
if (IS_ERR(dev_cs89x0)) {
|
|
printk(KERN_WARNING "mac89x0.c: No card found\n");
|
|
return PTR_ERR(dev_cs89x0);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
cleanup_module(void)
|
|
{
|
|
unregister_netdev(dev_cs89x0);
|
|
nubus_writew(0, dev_cs89x0->base_addr + ADD_PORT);
|
|
free_netdev(dev_cs89x0);
|
|
}
|
|
#endif /* MODULE */
|