f6365201d8
The X86_32-only disable_hlt/enable_hlt mechanism was used by the 32-bit floppy driver. Its effect was to replace the use of the HLT instruction inside default_idle() with cpu_relax() - essentially it turned off the use of HLT. This workaround was commented in the code as: "disable hlt during certain critical i/o operations" "This halt magic was a workaround for ancient floppy DMA wreckage. It should be safe to remove." H. Peter Anvin additionally adds: "To the best of my knowledge, no-hlt only existed because of flaky power distributions on 386/486 systems which were sold to run DOS. Since DOS did no power management of any kind, including HLT, the power draw was fairly uniform; when exposed to the much hhigher noise levels you got when Linux used HLT caused some of these systems to fail. They were by far in the minority even back then." Alan Cox further says: "Also for the Cyrix 5510 which tended to go castors up if a HLT occurred during a DMA cycle and on a few other boxes HLT during DMA tended to go astray. Do we care ? I doubt it. The 5510 was pretty obscure, the 5520 fixed it, the 5530 is probably the oldest still in any kind of use." So, let's finally drop this. Signed-off-by: Len Brown <len.brown@intel.com> Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Stephen Hemminger <shemminger@vyatta.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@kernel.org> Link: http://lkml.kernel.org/n/tip-3rhk9bzf0x9rljkv488tloib@git.kernel.org [ If anyone cares then alternative instruction patching could be used to replace HLT with a one-byte NOP instruction. Much simpler. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
524 lines
19 KiB
Plaintext
524 lines
19 KiB
Plaintext
The following is a list of files and features that are going to be
|
|
removed in the kernel source tree. Every entry should contain what
|
|
exactly is going away, why it is happening, and who is going to be doing
|
|
the work. When the feature is removed from the kernel, it should also
|
|
be removed from this file.
|
|
|
|
---------------------------
|
|
|
|
What: CONFIG_APM_CPU_IDLE, and its ability to call APM BIOS in idle
|
|
When: 2012
|
|
Why: This optional sub-feature of APM is of dubious reliability,
|
|
and ancient APM laptops are likely better served by calling HLT.
|
|
Deleting CONFIG_APM_CPU_IDLE allows x86 to stop exporting
|
|
the pm_idle function pointer to modules.
|
|
Who: Len Brown <len.brown@intel.com>
|
|
|
|
----------------------------
|
|
|
|
What: x86_32 "no-hlt" cmdline param
|
|
When: 2012
|
|
Why: remove a branch from idle path, simplify code used by everybody.
|
|
This option disabled the use of HLT in idle and machine_halt()
|
|
for hardware that was flakey 15-years ago. Today we have
|
|
"idle=poll" that removed HLT from idle, and so if such a machine
|
|
is still running the upstream kernel, "idle=poll" is likely sufficient.
|
|
Who: Len Brown <len.brown@intel.com>
|
|
|
|
----------------------------
|
|
|
|
What: x86 "idle=mwait" cmdline param
|
|
When: 2012
|
|
Why: simplify x86 idle code
|
|
Who: Len Brown <len.brown@intel.com>
|
|
|
|
----------------------------
|
|
|
|
What: PRISM54
|
|
When: 2.6.34
|
|
|
|
Why: prism54 FullMAC PCI / Cardbus devices used to be supported only by the
|
|
prism54 wireless driver. After Intersil stopped selling these
|
|
devices in preference for the newer more flexible SoftMAC devices
|
|
a SoftMAC device driver was required and prism54 did not support
|
|
them. The p54pci driver now exists and has been present in the kernel for
|
|
a while. This driver supports both SoftMAC devices and FullMAC devices.
|
|
The main difference between these devices was the amount of memory which
|
|
could be used for the firmware. The SoftMAC devices support a smaller
|
|
amount of memory. Because of this the SoftMAC firmware fits into FullMAC
|
|
devices's memory. p54pci supports not only PCI / Cardbus but also USB
|
|
and SPI. Since p54pci supports all devices prism54 supports
|
|
you will have a conflict. I'm not quite sure how distributions are
|
|
handling this conflict right now. prism54 was kept around due to
|
|
claims users may experience issues when using the SoftMAC driver.
|
|
Time has passed users have not reported issues. If you use prism54
|
|
and for whatever reason you cannot use p54pci please let us know!
|
|
E-mail us at: linux-wireless@vger.kernel.org
|
|
|
|
For more information see the p54 wiki page:
|
|
|
|
http://wireless.kernel.org/en/users/Drivers/p54
|
|
|
|
Who: Luis R. Rodriguez <lrodriguez@atheros.com>
|
|
|
|
---------------------------
|
|
|
|
What: IRQF_SAMPLE_RANDOM
|
|
Check: IRQF_SAMPLE_RANDOM
|
|
When: July 2009
|
|
|
|
Why: Many of IRQF_SAMPLE_RANDOM users are technically bogus as entropy
|
|
sources in the kernel's current entropy model. To resolve this, every
|
|
input point to the kernel's entropy pool needs to better document the
|
|
type of entropy source it actually is. This will be replaced with
|
|
additional add_*_randomness functions in drivers/char/random.c
|
|
|
|
Who: Robin Getz <rgetz@blackfin.uclinux.org> & Matt Mackall <mpm@selenic.com>
|
|
|
|
---------------------------
|
|
|
|
What: The ieee80211_regdom module parameter
|
|
When: March 2010 / desktop catchup
|
|
|
|
Why: This was inherited by the CONFIG_WIRELESS_OLD_REGULATORY code,
|
|
and currently serves as an option for users to define an
|
|
ISO / IEC 3166 alpha2 code for the country they are currently
|
|
present in. Although there are userspace API replacements for this
|
|
through nl80211 distributions haven't yet caught up with implementing
|
|
decent alternatives through standard GUIs. Although available as an
|
|
option through iw or wpa_supplicant its just a matter of time before
|
|
distributions pick up good GUI options for this. The ideal solution
|
|
would actually consist of intelligent designs which would do this for
|
|
the user automatically even when travelling through different countries.
|
|
Until then we leave this module parameter as a compromise.
|
|
|
|
When userspace improves with reasonable widely-available alternatives for
|
|
this we will no longer need this module parameter. This entry hopes that
|
|
by the super-futuristically looking date of "March 2010" we will have
|
|
such replacements widely available.
|
|
|
|
Who: Luis R. Rodriguez <lrodriguez@atheros.com>
|
|
|
|
---------------------------
|
|
|
|
What: dev->power.power_state
|
|
When: July 2007
|
|
Why: Broken design for runtime control over driver power states, confusing
|
|
driver-internal runtime power management with: mechanisms to support
|
|
system-wide sleep state transitions; event codes that distinguish
|
|
different phases of swsusp "sleep" transitions; and userspace policy
|
|
inputs. This framework was never widely used, and most attempts to
|
|
use it were broken. Drivers should instead be exposing domain-specific
|
|
interfaces either to kernel or to userspace.
|
|
Who: Pavel Machek <pavel@ucw.cz>
|
|
|
|
---------------------------
|
|
|
|
What: /proc/<pid>/oom_adj
|
|
When: August 2012
|
|
Why: /proc/<pid>/oom_adj allows userspace to influence the oom killer's
|
|
badness heuristic used to determine which task to kill when the kernel
|
|
is out of memory.
|
|
|
|
The badness heuristic has since been rewritten since the introduction of
|
|
this tunable such that its meaning is deprecated. The value was
|
|
implemented as a bitshift on a score generated by the badness()
|
|
function that did not have any precise units of measure. With the
|
|
rewrite, the score is given as a proportion of available memory to the
|
|
task allocating pages, so using a bitshift which grows the score
|
|
exponentially is, thus, impossible to tune with fine granularity.
|
|
|
|
A much more powerful interface, /proc/<pid>/oom_score_adj, was
|
|
introduced with the oom killer rewrite that allows users to increase or
|
|
decrease the badness score linearly. This interface will replace
|
|
/proc/<pid>/oom_adj.
|
|
|
|
A warning will be emitted to the kernel log if an application uses this
|
|
deprecated interface. After it is printed once, future warnings will be
|
|
suppressed until the kernel is rebooted.
|
|
|
|
---------------------------
|
|
|
|
What: remove EXPORT_SYMBOL(kernel_thread)
|
|
When: August 2006
|
|
Files: arch/*/kernel/*_ksyms.c
|
|
Check: kernel_thread
|
|
Why: kernel_thread is a low-level implementation detail. Drivers should
|
|
use the <linux/kthread.h> API instead which shields them from
|
|
implementation details and provides a higherlevel interface that
|
|
prevents bugs and code duplication
|
|
Who: Christoph Hellwig <hch@lst.de>
|
|
|
|
---------------------------
|
|
|
|
What: Unused EXPORT_SYMBOL/EXPORT_SYMBOL_GPL exports
|
|
(temporary transition config option provided until then)
|
|
The transition config option will also be removed at the same time.
|
|
When: before 2.6.19
|
|
Why: Unused symbols are both increasing the size of the kernel binary
|
|
and are often a sign of "wrong API"
|
|
Who: Arjan van de Ven <arjan@linux.intel.com>
|
|
|
|
---------------------------
|
|
|
|
What: PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
|
|
When: October 2008
|
|
Why: The stacking of class devices makes these values misleading and
|
|
inconsistent.
|
|
Class devices should not carry any of these properties, and bus
|
|
devices have SUBSYTEM and DRIVER as a replacement.
|
|
Who: Kay Sievers <kay.sievers@suse.de>
|
|
|
|
---------------------------
|
|
|
|
What: ACPI procfs interface
|
|
When: July 2008
|
|
Why: ACPI sysfs conversion should be finished by January 2008.
|
|
ACPI procfs interface will be removed in July 2008 so that
|
|
there is enough time for the user space to catch up.
|
|
Who: Zhang Rui <rui.zhang@intel.com>
|
|
|
|
---------------------------
|
|
|
|
What: CONFIG_ACPI_PROCFS_POWER
|
|
When: 2.6.39
|
|
Why: sysfs I/F for ACPI power devices, including AC and Battery,
|
|
has been working in upstream kernel since 2.6.24, Sep 2007.
|
|
In 2.6.37, we make the sysfs I/F always built in and this option
|
|
disabled by default.
|
|
Remove this option and the ACPI power procfs interface in 2.6.39.
|
|
Who: Zhang Rui <rui.zhang@intel.com>
|
|
|
|
---------------------------
|
|
|
|
What: /proc/acpi/event
|
|
When: February 2008
|
|
Why: /proc/acpi/event has been replaced by events via the input layer
|
|
and netlink since 2.6.23.
|
|
Who: Len Brown <len.brown@intel.com>
|
|
|
|
---------------------------
|
|
|
|
What: i386/x86_64 bzImage symlinks
|
|
When: April 2010
|
|
|
|
Why: The i386/x86_64 merge provides a symlink to the old bzImage
|
|
location so not yet updated user space tools, e.g. package
|
|
scripts, do not break.
|
|
Who: Thomas Gleixner <tglx@linutronix.de>
|
|
|
|
---------------------------
|
|
|
|
What: GPIO autorequest on gpio_direction_{input,output}() in gpiolib
|
|
When: February 2010
|
|
Why: All callers should use explicit gpio_request()/gpio_free().
|
|
The autorequest mechanism in gpiolib was provided mostly as a
|
|
migration aid for legacy GPIO interfaces (for SOC based GPIOs).
|
|
Those users have now largely migrated. Platforms implementing
|
|
the GPIO interfaces without using gpiolib will see no changes.
|
|
Who: David Brownell <dbrownell@users.sourceforge.net>
|
|
---------------------------
|
|
|
|
What: b43 support for firmware revision < 410
|
|
When: The schedule was July 2008, but it was decided that we are going to keep the
|
|
code as long as there are no major maintanance headaches.
|
|
So it _could_ be removed _any_ time now, if it conflicts with something new.
|
|
Why: The support code for the old firmware hurts code readability/maintainability
|
|
and slightly hurts runtime performance. Bugfixes for the old firmware
|
|
are not provided by Broadcom anymore.
|
|
Who: Michael Buesch <m@bues.ch>
|
|
|
|
---------------------------
|
|
|
|
What: Ability for non root users to shm_get hugetlb pages based on mlock
|
|
resource limits
|
|
When: 2.6.31
|
|
Why: Non root users need to be part of /proc/sys/vm/hugetlb_shm_group or
|
|
have CAP_IPC_LOCK to be able to allocate shm segments backed by
|
|
huge pages. The mlock based rlimit check to allow shm hugetlb is
|
|
inconsistent with mmap based allocations. Hence it is being
|
|
deprecated.
|
|
Who: Ravikiran Thirumalai <kiran@scalex86.org>
|
|
|
|
---------------------------
|
|
|
|
What: Code that is now under CONFIG_WIRELESS_EXT_SYSFS
|
|
(in net/core/net-sysfs.c)
|
|
When: 3.5
|
|
Why: Over 1K .text/.data size reduction, data is available in other
|
|
ways (ioctls)
|
|
Who: Johannes Berg <johannes@sipsolutions.net>
|
|
|
|
---------------------------
|
|
|
|
What: sysfs ui for changing p4-clockmod parameters
|
|
When: September 2009
|
|
Why: See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and
|
|
e088e4c9cdb618675874becb91b2fd581ee707e6.
|
|
Removal is subject to fixing any remaining bugs in ACPI which may
|
|
cause the thermal throttling not to happen at the right time.
|
|
Who: Dave Jones <davej@redhat.com>, Matthew Garrett <mjg@redhat.com>
|
|
|
|
-----------------------------
|
|
|
|
What: fakephp and associated sysfs files in /sys/bus/pci/slots/
|
|
When: 2011
|
|
Why: In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to
|
|
represent a machine's physical PCI slots. The change in semantics
|
|
had userspace implications, as the hotplug core no longer allowed
|
|
drivers to create multiple sysfs files per physical slot (required
|
|
for multi-function devices, e.g.). fakephp was seen as a developer's
|
|
tool only, and its interface changed. Too late, we learned that
|
|
there were some users of the fakephp interface.
|
|
|
|
In 2.6.30, the original fakephp interface was restored. At the same
|
|
time, the PCI core gained the ability that fakephp provided, namely
|
|
function-level hot-remove and hot-add.
|
|
|
|
Since the PCI core now provides the same functionality, exposed in:
|
|
|
|
/sys/bus/pci/rescan
|
|
/sys/bus/pci/devices/.../remove
|
|
/sys/bus/pci/devices/.../rescan
|
|
|
|
there is no functional reason to maintain fakephp as well.
|
|
|
|
We will keep the existing module so that 'modprobe fakephp' will
|
|
present the old /sys/bus/pci/slots/... interface for compatibility,
|
|
but users are urged to migrate their applications to the API above.
|
|
|
|
After a reasonable transition period, we will remove the legacy
|
|
fakephp interface.
|
|
Who: Alex Chiang <achiang@hp.com>
|
|
|
|
---------------------------
|
|
|
|
What: CONFIG_RFKILL_INPUT
|
|
When: 2.6.33
|
|
Why: Should be implemented in userspace, policy daemon.
|
|
Who: Johannes Berg <johannes@sipsolutions.net>
|
|
|
|
----------------------------
|
|
|
|
What: sound-slot/service-* module aliases and related clutters in
|
|
sound/sound_core.c
|
|
When: August 2010
|
|
Why: OSS sound_core grabs all legacy minors (0-255) of SOUND_MAJOR
|
|
(14) and requests modules using custom sound-slot/service-*
|
|
module aliases. The only benefit of doing this is allowing
|
|
use of custom module aliases which might as well be considered
|
|
a bug at this point. This preemptive claiming prevents
|
|
alternative OSS implementations.
|
|
|
|
Till the feature is removed, the kernel will be requesting
|
|
both sound-slot/service-* and the standard char-major-* module
|
|
aliases and allow turning off the pre-claiming selectively via
|
|
CONFIG_SOUND_OSS_CORE_PRECLAIM and soundcore.preclaim_oss
|
|
kernel parameter.
|
|
|
|
After the transition phase is complete, both the custom module
|
|
aliases and switches to disable it will go away. This removal
|
|
will also allow making ALSA OSS emulation independent of
|
|
sound_core. The dependency will be broken then too.
|
|
Who: Tejun Heo <tj@kernel.org>
|
|
|
|
----------------------------
|
|
|
|
What: sysfs-class-rfkill state file
|
|
When: Feb 2014
|
|
Files: net/rfkill/core.c
|
|
Why: Documented as obsolete since Feb 2010. This file is limited to 3
|
|
states while the rfkill drivers can have 4 states.
|
|
Who: anybody or Florian Mickler <florian@mickler.org>
|
|
|
|
----------------------------
|
|
|
|
What: sysfs-class-rfkill claim file
|
|
When: Feb 2012
|
|
Files: net/rfkill/core.c
|
|
Why: It is not possible to claim an rfkill driver since 2007. This is
|
|
Documented as obsolete since Feb 2010.
|
|
Who: anybody or Florian Mickler <florian@mickler.org>
|
|
|
|
----------------------------
|
|
|
|
What: iwlwifi 50XX module parameters
|
|
When: 3.0
|
|
Why: The "..50" modules parameters were used to configure 5000 series and
|
|
up devices; different set of module parameters also available for 4965
|
|
with same functionalities. Consolidate both set into single place
|
|
in drivers/net/wireless/iwlwifi/iwl-agn.c
|
|
|
|
Who: Wey-Yi Guy <wey-yi.w.guy@intel.com>
|
|
|
|
----------------------------
|
|
|
|
What: iwl4965 alias support
|
|
When: 3.0
|
|
Why: Internal alias support has been present in module-init-tools for some
|
|
time, the MODULE_ALIAS("iwl4965") boilerplate aliases can be removed
|
|
with no impact.
|
|
|
|
Who: Wey-Yi Guy <wey-yi.w.guy@intel.com>
|
|
|
|
---------------------------
|
|
|
|
What: xt_NOTRACK
|
|
Files: net/netfilter/xt_NOTRACK.c
|
|
When: April 2011
|
|
Why: Superseded by xt_CT
|
|
Who: Netfilter developer team <netfilter-devel@vger.kernel.org>
|
|
|
|
----------------------------
|
|
|
|
What: IRQF_DISABLED
|
|
When: 2.6.36
|
|
Why: The flag is a NOOP as we run interrupt handlers with interrupts disabled
|
|
Who: Thomas Gleixner <tglx@linutronix.de>
|
|
|
|
----------------------------
|
|
|
|
What: PCI DMA unmap state API
|
|
When: August 2012
|
|
Why: PCI DMA unmap state API (include/linux/pci-dma.h) was replaced
|
|
with DMA unmap state API (DMA unmap state API can be used for
|
|
any bus).
|
|
Who: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
|
|
|
|
----------------------------
|
|
|
|
What: iwlwifi disable_hw_scan module parameters
|
|
When: 3.0
|
|
Why: Hareware scan is the prefer method for iwlwifi devices for
|
|
scanning operation. Remove software scan support for all the
|
|
iwlwifi devices.
|
|
|
|
Who: Wey-Yi Guy <wey-yi.w.guy@intel.com>
|
|
|
|
----------------------------
|
|
|
|
What: Legacy, non-standard chassis intrusion detection interface.
|
|
When: June 2011
|
|
Why: The adm9240, w83792d and w83793 hardware monitoring drivers have
|
|
legacy interfaces for chassis intrusion detection. A standard
|
|
interface has been added to each driver, so the legacy interface
|
|
can be removed.
|
|
Who: Jean Delvare <khali@linux-fr.org>
|
|
|
|
----------------------------
|
|
|
|
What: xt_connlimit rev 0
|
|
When: 2012
|
|
Who: Jan Engelhardt <jengelh@medozas.de>
|
|
Files: net/netfilter/xt_connlimit.c
|
|
|
|
----------------------------
|
|
|
|
What: ipt_addrtype match include file
|
|
When: 2012
|
|
Why: superseded by xt_addrtype
|
|
Who: Florian Westphal <fw@strlen.de>
|
|
Files: include/linux/netfilter_ipv4/ipt_addrtype.h
|
|
|
|
----------------------------
|
|
|
|
What: i2c_driver.attach_adapter
|
|
i2c_driver.detach_adapter
|
|
When: September 2011
|
|
Why: These legacy callbacks should no longer be used as i2c-core offers
|
|
a variety of preferable alternative ways to instantiate I2C devices.
|
|
Who: Jean Delvare <khali@linux-fr.org>
|
|
|
|
----------------------------
|
|
|
|
What: Opening a radio device node will no longer automatically switch the
|
|
tuner mode from tv to radio.
|
|
When: 3.3
|
|
Why: Just opening a V4L device should not change the state of the hardware
|
|
like that. It's very unexpected and against the V4L spec. Instead, you
|
|
switch to radio mode by calling VIDIOC_S_FREQUENCY. This is the second
|
|
and last step of the move to consistent handling of tv and radio tuners.
|
|
Who: Hans Verkuil <hans.verkuil@cisco.com>
|
|
|
|
----------------------------
|
|
|
|
What: g_file_storage driver
|
|
When: 3.8
|
|
Why: This driver has been superseded by g_mass_storage.
|
|
Who: Alan Stern <stern@rowland.harvard.edu>
|
|
|
|
----------------------------
|
|
|
|
What: threeg and interface sysfs files in /sys/devices/platform/acer-wmi
|
|
When: 2012
|
|
Why: In 3.0, we can now autodetect internal 3G device and already have
|
|
the threeg rfkill device. So, we plan to remove threeg sysfs support
|
|
for it's no longer necessary.
|
|
|
|
We also plan to remove interface sysfs file that exposed which ACPI-WMI
|
|
interface that was used by acer-wmi driver. It will replaced by
|
|
information log when acer-wmi initial.
|
|
Who: Lee, Chun-Yi <jlee@novell.com>
|
|
|
|
---------------------------
|
|
|
|
What: /sys/devices/platform/_UDC_/udc/_UDC_/is_dualspeed file and
|
|
is_dualspeed line in /sys/devices/platform/ci13xxx_*/udc/device file.
|
|
When: 3.8
|
|
Why: The is_dualspeed file is superseded by maximum_speed in the same
|
|
directory and is_dualspeed line in device file is superseded by
|
|
max_speed line in the same file.
|
|
|
|
The maximum_speed/max_speed specifies maximum speed supported by UDC.
|
|
To check if dualspeeed is supported, check if the value is >= 3.
|
|
Various possible speeds are defined in <linux/usb/ch9.h>.
|
|
Who: Michal Nazarewicz <mina86@mina86.com>
|
|
|
|
----------------------------
|
|
|
|
What: The XFS nodelaylog mount option
|
|
When: 3.3
|
|
Why: The delaylog mode that has been the default since 2.6.39 has proven
|
|
stable, and the old code is in the way of additional improvements in
|
|
the log code.
|
|
Who: Christoph Hellwig <hch@lst.de>
|
|
|
|
----------------------------
|
|
|
|
What: iwlagn alias support
|
|
When: 3.5
|
|
Why: The iwlagn module has been renamed iwlwifi. The alias will be around
|
|
for backward compatibility for several cycles and then dropped.
|
|
Who: Don Fry <donald.h.fry@intel.com>
|
|
|
|
----------------------------
|
|
|
|
What: pci_scan_bus_parented()
|
|
When: 3.5
|
|
Why: The pci_scan_bus_parented() interface creates a new root bus. The
|
|
bus is created with default resources (ioport_resource and
|
|
iomem_resource) that are always wrong, so we rely on arch code to
|
|
correct them later. Callers of pci_scan_bus_parented() should
|
|
convert to using pci_scan_root_bus() so they can supply a list of
|
|
bus resources when the bus is created.
|
|
Who: Bjorn Helgaas <bhelgaas@google.com>
|
|
|
|
----------------------------
|
|
|
|
What: Low Performance USB Block driver ("CONFIG_BLK_DEV_UB")
|
|
When: 3.6
|
|
Why: This driver provides support for USB storage devices like "USB
|
|
sticks". As of now, it is deactivated in Debian, Fedora and
|
|
Ubuntu. All current users can switch over to usb-storage
|
|
(CONFIG_USB_STORAGE) which only drawback is the additional SCSI
|
|
stack.
|
|
Who: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
|
|
|
|
----------------------------
|
|
|
|
What: kmap_atomic(page, km_type)
|
|
When: 3.5
|
|
Why: The old kmap_atomic() with two arguments is deprecated, we only
|
|
keep it for backward compatibility for few cycles and then drop it.
|
|
Who: Cong Wang <amwang@redhat.com>
|