AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
11a332adfe
kernel_optimize_test/arch/arm/mach-mx3/Kconfig

118 lines
3.2 KiB
Plaintext
Raw Normal View History

arm/imx: Kconfig beautification Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-29 21:42:25 +08:00
if ARCH_MX3
[ARM] add i.MX35 build support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-06 22:41:45 +08:00
config ARCH_MX31
i.MX31: Add hw-random for RNGA This hw-random driver add support to RNGA hardware found on some i.MX processors. Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-02 23:38:41 +08:00
select ARCH_HAS_RNGA
MXC: Add a digital audio multiplexer driver Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-10-30 00:12:39 +08:00
select ARCH_MXC_AUDMUX_V2
[ARM] add i.MX35 build support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-06 22:41:45 +08:00
bool
config ARCH_MX35
bool
MXC: Add iomux support for MX35 SoCs This iomux is called iomux-v3 in the tree because it is the third known incarnation of MXC iomuxers. It is not only found on the MX35 but also on the MX51 and probably others. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-01 17:11:48 +08:00
select ARCH_MXC_IOMUX_V3
MXC: Add a digital audio multiplexer driver Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-10-30 00:12:39 +08:00
select ARCH_MXC_AUDMUX_V2
[ARM] add i.MX35 build support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-06 22:41:45 +08:00
arm/imx: Kconfig beautification Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-29 21:42:25 +08:00
comment "MX3 platforms:"
[ARM] 4461/1: MXC platform and i.MX31ADS core support This patch adds the foundation pieces for the Freescale MXC platforms, including i.MX2 and i.MX3 based systems. The bare-bones MX31 support in this patch boots to the rootdev panic with 8250 serial console configured "console=ttyS0,115200". It assumes that Redboot is the boot loader. Signed-off-by: Quinn Jensen <quinn.jensen@freescale.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-10 05:06:53 +08:00
config MACH_MX31ADS
bool "Support MX31ADS platforms"
[ARM] add i.MX35 build support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-06 22:41:45 +08:00
select ARCH_MX31
[ARM] 4461/1: MXC platform and i.MX31ADS core support This patch adds the foundation pieces for the Freescale MXC platforms, including i.MX2 and i.MX3 based systems. The bare-bones MX31 support in this patch boots to the rootdev panic with 8250 serial console configured "console=ttyS0,115200". It assumes that Redboot is the boot loader. Signed-off-by: Quinn Jensen <quinn.jensen@freescale.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-10 05:06:53 +08:00
default y
help
Include support for MX31ADS platform. This includes specific
configurations for the board and its peripherals.
mx31ads: Initial support for Wolfson Microelectronics 1133-EV1 module The i.MX31ADS supports pluggable PMU modules, including the WM835x based Wolfson Microelectronics 1133-EV1. These boards provide power, audio, RTC and watchdiog services to the system. This patch adds initial support for those boards in I2C mode. Currently support is limited by the available support for the features of the i.MX31 in the mainline kernel. Some further work will be needed once other PMU modules are supported and once there is SPI support. Many of the regulator constraints will be sharable with other PMU boards. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-16 00:14:30 +08:00
config MACH_MX31ADS_WM1133_EV1
bool "Support Wolfson Microelectronics 1133-EV1 module"
depends on MACH_MX31ADS
mx31ads: Depend on all the WM8350 core dependencies for WM1133-EV1 board Otherwise we'd need massive ifdefs in the code. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-04-14 18:25:18 +08:00
depends on MFD_WM8350_I2C
depends on REGULATOR_WM8350
mx31ads: Initial support for Wolfson Microelectronics 1133-EV1 module The i.MX31ADS supports pluggable PMU modules, including the WM835x based Wolfson Microelectronics 1133-EV1. These boards provide power, audio, RTC and watchdiog services to the system. This patch adds initial support for those boards in I2C mode. Currently support is limited by the available support for the features of the i.MX31 in the mainline kernel. Some further work will be needed once other PMU modules are supported and once there is SPI support. Many of the regulator constraints will be sharable with other PMU boards. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-16 00:14:30 +08:00
select MFD_WM8350_CONFIG_MODE_0
select MFD_WM8352_CONFIG_MODE_0
help
Include support for the Wolfson Microelectronics 1133-EV1 PMU
and audio module for the MX31ADS platform.
MX31: add basic pcm037 board support This patch adds basic board support for phytecs pmc037 board. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05 16:02:52 +08:00
config MACH_PCM037
[ARM] add i.MX35 build support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-06 22:41:45 +08:00
bool "Support Phytec pcm037 (i.MX31) platforms"
select ARCH_MX31
i.MX31 pcm037: Add USB support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-02-04 16:32:44 +08:00
select MXC_ULPI if USB_ULPI
MX31: add basic pcm037 board support This patch adds basic board support for phytecs pmc037 board. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-07-05 16:02:52 +08:00
help
Include support for Phytec pcm037 platform. This includes
specific configurations for the board and its peripherals.
ARM: add support for the EET board, based on the i.MX31 pcm037 module The "EET" variant of the pcm037 board has an OLED display, using a S6E63D6 display controller on the first SPI interface, using GPIO57 as a chip-select for it. S6E63D6 is initialised in the boot-loader, so we only have to take care of the LCD. EET also adds several buttons and LEDs on GPIOs. This patch adds a "pcm037_variant=" kernel command line parameter to specify at boot-time which board the kernel is running on, default is "pcm970", specify "eet" for the EET board. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-23 19:26:23 +08:00
config MACH_PCM037_EET
bool "Support pcm037 EET board extensions"
depends on MACH_PCM037
help
Add support for PCM037 EET baseboard extensions. If you are using the
OLED display with EET, use "video=mx3fb:CMEL-OLED" kernel
command-line parameter.
MX3: Add basic support for LogicPD i.MX31 LiteKit This patch adds basic support for i.MX31 LiteKit by LogicPD. With printascii() in kernel/printk.c, it boots right into the rootfs-panic. Note: This is a modified version of Daniel's patch to fit into this patch stack. > On 09.06.2008, at 17:26, Russell King - ARM Linux wrote: > > > I would much prefer it if board specific includes were included by the > > code which needs them rather than in asm/arch/hardware.h.  With the > > device model, drivers shouldn't need to include any board specific > > includes - only the board specific C file should need it. > > The new version of this patch (#5102) has been uploaded to the patch > tracker this morning. Signed-off-by: Daniel Mack <daniel@caiaq.de> -- arch/arm/configs/mx31litekit_defconfig | 1100 ++++++++++++++++++++++++++++++ arch/arm/mach-mx3/Kconfig | 7 arch/arm/mach-mx3/Makefile | 1 arch/arm/mach-mx3/mx31lite.c | 96 ++ include/asm-arm/arch-mxc/board-mx31lite.h | 38 + include/asm-arm/arch-mxc/debug-macro.S | 3 6 files changed, 1245 insertions(+)
2008-07-05 16:02:53 +08:00
config MACH_MX31LITE
bool "Support MX31 LITEKIT (LogicPD)"
[ARM] add i.MX35 build support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-06 22:41:45 +08:00
select ARCH_MX31
imx/mx3: depend on USB_ULPI for otg_ulpi_create otg_ulpi_create is defined in drivers/usb/otg/ulpi.c which depends on CONFIG_USB_ULPI. So protect its usage by the same symbol. Moreover mxc_ulpi_access_ops needs CONFIG_MXC_ULPI. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Valentin Longchamp <valentin.longchamp@epfl.ch> Cc: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-12-23 00:31:05 +08:00
select MXC_ULPI if USB_ULPI
MX3: Add basic support for LogicPD i.MX31 LiteKit This patch adds basic support for i.MX31 LiteKit by LogicPD. With printascii() in kernel/printk.c, it boots right into the rootfs-panic. Note: This is a modified version of Daniel's patch to fit into this patch stack. > On 09.06.2008, at 17:26, Russell King - ARM Linux wrote: > > > I would much prefer it if board specific includes were included by the > > code which needs them rather than in asm/arch/hardware.h.  With the > > device model, drivers shouldn't need to include any board specific > > includes - only the board specific C file should need it. > > The new version of this patch (#5102) has been uploaded to the patch > tracker this morning. Signed-off-by: Daniel Mack <daniel@caiaq.de> -- arch/arm/configs/mx31litekit_defconfig | 1100 ++++++++++++++++++++++++++++++ arch/arm/mach-mx3/Kconfig | 7 arch/arm/mach-mx3/Makefile | 1 arch/arm/mach-mx3/mx31lite.c | 96 ++ include/asm-arm/arch-mxc/board-mx31lite.h | 38 + include/asm-arm/arch-mxc/debug-macro.S | 3 6 files changed, 1245 insertions(+)
2008-07-05 16:02:53 +08:00
help
Include support for MX31 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
Add basic support for MX31PDK board. Add basic support to the MX31PDK development board, also known as MX31 3DS or MX31 3-stack board (http://www.freescale.com/imx31pdk). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: sascha Hauer <s.hauer@pengutronix.de>
2008-11-12 22:38:39 +08:00
config MACH_MX31_3DS
bool "Support MX31PDK (3DS)"
[ARM] add i.MX35 build support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-06 22:41:45 +08:00
select ARCH_MX31
Add basic support for MX31PDK board. Add basic support to the MX31PDK development board, also known as MX31 3DS or MX31 3-stack board (http://www.freescale.com/imx31pdk). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: sascha Hauer <s.hauer@pengutronix.de>
2008-11-12 22:38:39 +08:00
help
Include support for MX31PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
[ARM] MX31: basic support for mx31moboard platform Initial support for mx31moboard platfor with 3 serial ports and NOR Flash Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-11-24 00:35:08 +08:00
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
[ARM] add i.MX35 build support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-06 22:41:45 +08:00
select ARCH_MX31
imx/mx3: depend on USB_ULPI for otg_ulpi_create otg_ulpi_create is defined in drivers/usb/otg/ulpi.c which depends on CONFIG_USB_ULPI. So protect its usage by the same symbol. Moreover mxc_ulpi_access_ops needs CONFIG_MXC_ULPI. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Valentin Longchamp <valentin.longchamp@epfl.ch> Cc: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-12-23 00:31:05 +08:00
select MXC_ULPI if USB_ULPI
[ARM] MX31: basic support for mx31moboard platform Initial support for mx31moboard platfor with 3 serial ports and NOR Flash Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-11-24 00:35:08 +08:00
help
Include support for mx31moboard platform. This includes specific
configurations for the board and its peripherals.
ARM: MX3: basic support for lilly-1131 board This patch adds basic support for INCO startec's LILLY-1131 iMX31 based modules. The module needs a baseboard support to work which will be added in the next patch. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-21 01:54:33 +08:00
config MACH_MX31LILLY
bool "Support MX31 LILLY-1131 platforms (INCO startec)"
select ARCH_MX31
help
Include support for mx31 based LILLY1131 modules. This includes
specific configurations for the board and its peripherals.
qong: basic support for Dave/DENX QongEVB-LITE board This patch adds basic support for Dave/DENX QongEVB-LITE i.MX31-based board. It includes support for clocks initialization, UART1, NOR-flash, FPGA-attached NAND flash and DNET ethernet controller (inside FPGA). Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-03-11 08:22:00 +08:00
config MACH_QONG
bool "Support Dave/DENX QongEVB-LITE platform"
select ARCH_MX31
help
Include support for Dave/DENX QongEVB-LITE platform. This includes
specific configurations for the board and its peripherals.
[ARM] MX35: Add PCM043 board support The PCM043 is a i.MX35 based board from Phytec also known as the phyCORE-i.MX35. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-06 22:42:26 +08:00
config MACH_PCM043
bool "Support Phytec pcm043 (i.MX35) platforms"
select ARCH_MX35
i.MX27 pca100: Add USB support Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2010-02-04 21:32:53 +08:00
select MXC_ULPI if USB_ULPI
[ARM] MX35: Add PCM043 board support The PCM043 is a i.MX35 based board from Phytec also known as the phyCORE-i.MX35. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-06 22:42:26 +08:00
help
Include support for Phytec pcm043 platform. This includes
specific configurations for the board and its peripherals.
Atmark Armadillo 500 board support. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-05-19 16:01:03 +08:00
config MACH_ARMADILLO5X0
bool "Support Atmark Armadillo-500 Development Base Board"
select ARCH_MX31
help
Include support for Atmark Armadillo-500 platform. This includes
specific configurations for the board and its peripherals.
MX35: Add basic support for MX35PDK board Add basic support for MX35PDK board (www.freescale.com/imx35pdk). Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-06-03 08:24:16 +08:00
config MACH_MX35_3DS
bool "Support MX35PDK platform"
select ARCH_MX35
default n
help
Include support for MX35PDK platform. This includes specific
configurations for the board and its peripherals.
Add KZM-ARM11-01 support Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-02 10:37:36 +08:00
config MACH_KZM_ARM11_01
bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
select ARCH_MX31
help
Include support for KZM-ARM11-01. This includes specific
configurations for the board and its peripherals.
arm/imx: Kconfig beautification Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-01-29 21:42:25 +08:00
endif
Copy Permalink