Make nfs_readdir revalidate only when we're at the beginning of the directory or
if the cached attributes have expired.
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
NFS: Make nfs_attribute_cache_expired() non-static so we can call it from
nfs_readdir().
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently the way these get set is a little convoluted. If the dentry is
allocated via lookup from userland, then it gets set by simple_lookup.
If it gets allocated when the kernel is populating the directory, then
it gets set via __rpc_lookup_create_exclusive, which has to check
whether they might already be set. Between both of these, this ensures
that all dentries have their d_op pointer set.
Instead of doing that, just have them set at d_alloc time by pointing
sb->s_d_op at them. With that change, we no longer want the lookup op
to set them, so we must move to using our own lookup routine.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
nfs_prime_dcache currently only sets the verifier when it doesn't
initially a matching dentry in the dcache. Set the verifier in the case
where we do find a dentry in the dcache. This ensures that we don't
have to look up the dentry again if we want to use it after a readdir.
Cc: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Merge second patch-bomb from Andrew Morton:
- misc fixes
- audit stuff
- fanotify/inotify/dnotify things
- most of the rest of MM. The new cache shrinker code from Glauber and
Dave Chinner probably isn't quite stabilized yet.
- ptrace
- ipc
- partitions
- reboot cleanups
- add LZ4 decompressor, use it for kernel compression
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (118 commits)
lib/scatterlist: error handling in __sg_alloc_table()
scsi_debug: fix do_device_access() with wrap around range
crypto: talitos: use sg_pcopy_to_buffer()
lib/scatterlist: introduce sg_pcopy_from_buffer() and sg_pcopy_to_buffer()
lib/scatterlist: factor out sg_miter_get_next_page() from sg_miter_next()
crypto: add lz4 Cryptographic API
lib: add lz4 compressor module
arm: add support for LZ4-compressed kernel
lib: add support for LZ4-compressed kernel
decompressor: add LZ4 decompressor module
lib: add weak clz/ctz functions
reboot: move arch/x86 reboot= handling to generic kernel
reboot: arm: change reboot_mode to use enum reboot_mode
reboot: arm: prepare reboot_mode for moving to generic kernel code
reboot: arm: remove unused restart_mode fields from some arm subarchs
reboot: unicore32: prepare reboot_mode for moving to generic kernel code
reboot: x86: prepare reboot_mode for moving to generic kernel code
reboot: checkpatch.pl the new kernel/reboot.c file
reboot: move shutdown/reboot related functions to kernel/reboot.c
reboot: remove -stable friendly PF_THREAD_BOUND define
...
* optional security enhancements
* fix path coverage in MAINTAINERS
* switch to using most used protocol and transport as default
* clean up buffer dumps in trace code
Held off on RDMA patches as they need to be cleaned up a bit, but
will try to get the cleaned, checked, and pushed by mid-week.
(attempt 2, hopefully this one won't screw up the history)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
Comment: GPGTools - http://gpgtools.org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=ktVU
-----END PGP SIGNATURE-----
Merge tag 'for-linus-3.11-merge-window-part-1' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
Pull 9p update from Eric Van Hensbergen:
"Grab bag of little fixes and enhancements:
- optional security enhancements
- fix path coverage in MAINTAINERS
- switch to using most used protocol and transport as default
- clean up buffer dumps in trace code
Held off on RDMA patches as they need to be cleaned up a bit, but will
try to get the cleaned, checked, and pushed by mid-week"
* tag 'for-linus-3.11-merge-window-part-1' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
9p: Add rest of 9p files to MAINTAINERS entry
9p: trace: use %*ph to dump buffer
net/9p: Handle error in zero copy request correctly for 9p2000.u
net/9p: Use virtio transpart as the default transport
net/9p: Make 9P2000.L the default protocol for 9p file system
Pull Ceph updates from Sage Weil:
"There is some follow-on RBD cleanup after the last window's code drop,
a series from Yan fixing multi-mds behavior in cephfs, and then a
sprinkling of bug fixes all around. Some warnings, sleeping while
atomic, a null dereference, and cleanups"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (36 commits)
libceph: fix invalid unsigned->signed conversion for timespec encoding
libceph: call r_unsafe_callback when unsafe reply is received
ceph: fix race between cap issue and revoke
ceph: fix cap revoke race
ceph: fix pending vmtruncate race
ceph: avoid accessing invalid memory
libceph: Fix NULL pointer dereference in auth client code
ceph: Reconstruct the func ceph_reserve_caps.
ceph: Free mdsc if alloc mdsc->mdsmap failed.
ceph: remove sb_start/end_write in ceph_aio_write.
ceph: avoid meaningless calling ceph_caps_revoking if sync_mode == WB_SYNC_ALL.
ceph: fix sleeping function called from invalid context.
ceph: move inode to proper flushing list when auth MDS changes
rbd: fix a couple warnings
ceph: clear migrate seq when MDS restarts
ceph: check migrate seq before changing auth cap
ceph: fix race between page writeback and truncate
ceph: reset iov_len when discarding cap release messages
ceph: fix cap release race
libceph: fix truncate size calculation
...
Pull btrfs update from Chris Mason:
"These are the usual mixture of bugs, cleanups and performance fixes.
Miao has some really nice tuning of our crc code as well as our
transaction commits.
Josef is peeling off more and more problems related to early enospc,
and has a number of important bug fixes in here too"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (81 commits)
Btrfs: wait ordered range before doing direct io
Btrfs: only do the tree_mod_log_free_eb if this is our last ref
Btrfs: hold the tree mod lock in __tree_mod_log_rewind
Btrfs: make backref walking code handle skinny metadata
Btrfs: fix crash regarding to ulist_add_merge
Btrfs: fix several potential problems in copy_nocow_pages_for_inode
Btrfs: cleanup the code of copy_nocow_pages_for_inode()
Btrfs: fix oops when recovering the file data by scrub function
Btrfs: make the chunk allocator completely tree lockless
Btrfs: cleanup orphaned root orphan item
Btrfs: fix wrong mirror number tuning
Btrfs: cleanup redundant code in btrfs_submit_direct()
Btrfs: remove btrfs_sector_sum structure
Btrfs: check if we can nocow if we don't have data space
Btrfs: stop using try_to_writeback_inodes_sb_nr to flush delalloc
Btrfs: use a percpu to keep track of possibly pinned bytes
Btrfs: check for actual acls rather than just xattrs when caching no acl
Btrfs: move btrfs_truncate_page to btrfs_cont_expand instead of btrfs_truncate
Btrfs: optimize reada_for_balance
Btrfs: optimize read_block_for_search
...
- part of the work to allow project quotas and group quotas to
be used together
- inode change count
- inode create transaction
- block queue plugging in buffer readahead and bulkstat
- ordered log vector support
- removal of dead code in and around xfs_sync_inode_grab,
xfs_ialloc_get_rec, XFS_MOUNT_RETERR, XFS_ALLOCFREE_LOG_RES,
XFS_DIROP_LOG_RES, xfs_chash, ctl_table, and xfs_growfs_data_private
- don't keep silent if sunit/swidth can not be changed via mount
- fix a leak of remote symlink blocks into the filesystem when
xattrs are used on symlinks
- fix for fiemap to return FIEMAP_EXTENT_UNKOWN flag on delay extents
- part of a fix for xfs_fsr
- disable speculative preallocation with small files
- performance improvements for inode creates and deletes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=v6KW
-----END PGP SIGNATURE-----
Merge tag 'for-linus-v3.11-rc1' of git://oss.sgi.com/xfs/xfs
Pull xfs update from Ben Myers:
"This includes several bugfixes, part of the work for project quotas
and group quotas to be used together, performance improvements for
inode creation/deletion, buffer readahead, and bulkstat,
implementation of the inode change count, an inode create transaction,
and the removal of a bunch of dead code.
There are also some duplicate commits that you already have from the
3.10-rc series.
- part of the work to allow project quotas and group quotas to be
used together
- inode change count
- inode create transaction
- block queue plugging in buffer readahead and bulkstat
- ordered log vector support
- removal of dead code in and around xfs_sync_inode_grab,
xfs_ialloc_get_rec, XFS_MOUNT_RETERR, XFS_ALLOCFREE_LOG_RES,
XFS_DIROP_LOG_RES, xfs_chash, ctl_table, and
xfs_growfs_data_private
- don't keep silent if sunit/swidth can not be changed via mount
- fix a leak of remote symlink blocks into the filesystem when xattrs
are used on symlinks
- fix for fiemap to return FIEMAP_EXTENT_UNKOWN flag on delay extents
- part of a fix for xfs_fsr
- disable speculative preallocation with small files
- performance improvements for inode creates and deletes"
* tag 'for-linus-v3.11-rc1' of git://oss.sgi.com/xfs/xfs: (61 commits)
xfs: Remove incore use of XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD
xfs: Change xfs_dquot_acct to be a 2-dimensional array
xfs: Code cleanup and removal of some typedef usage
xfs: Replace macro XFS_DQ_TO_QIP with a function
xfs: Replace macro XFS_DQUOT_TREE with a function
xfs: Define a new function xfs_is_quota_inode()
xfs: implement inode change count
xfs: Use inode create transaction
xfs: Inode create item recovery
xfs: Inode create transaction reservations
xfs: Inode create log items
xfs: Introduce an ordered buffer item
xfs: Introduce ordered log vector support
xfs: xfs_ifree doesn't need to modify the inode buffer
xfs: don't do IO when creating an new inode
xfs: don't use speculative prealloc for small files
xfs: plug directory buffer readahead
xfs: add pluging for bulkstat readahead
xfs: Remove dead function prototype xfs_sync_inode_grab()
xfs: Remove the left function variable from xfs_ialloc_get_rec()
...
Feature highlights include:
- Add basic client support for NFSv4.2
- Add basic client support for Labeled NFS (selinux for NFSv4.2)
- Fix the use of credentials in NFSv4.1 stateful operations, and
add support for NFSv4.1 state protection.
Bugfix highlights:
- Fix another NFSv4 open state recovery race
- Fix an NFSv4.1 back channel session regression
- Various rpc_pipefs races
- Fix another issue with NFSv3 auth negotiation
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=wGjn
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-3.11-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Feature highlights include:
- Add basic client support for NFSv4.2
- Add basic client support for Labeled NFS (selinux for NFSv4.2)
- Fix the use of credentials in NFSv4.1 stateful operations, and add
support for NFSv4.1 state protection.
Bugfix highlights:
- Fix another NFSv4 open state recovery race
- Fix an NFSv4.1 back channel session regression
- Various rpc_pipefs races
- Fix another issue with NFSv3 auth negotiation
Please note that Labeled NFS does require some additional support from
the security subsystem. The relevant changesets have all been
reviewed and acked by James Morris."
* tag 'nfs-for-3.11-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (54 commits)
NFS: Set NFS_CS_MIGRATION for NFSv4 mounts
NFSv4.1 Refactor nfs4_init_session and nfs4_init_channel_attrs
nfs: have NFSv3 try server-specified auth flavors in turn
nfs: have nfs_mount fake up a auth_flavs list when the server didn't provide it
nfs: move server_authlist into nfs_try_mount_request
nfs: refactor "need_mount" code out of nfs_try_mount
SUNRPC: PipeFS MOUNT notification optimization for dying clients
SUNRPC: split client creation routine into setup and registration
SUNRPC: fix races on PipeFS UMOUNT notifications
SUNRPC: fix races on PipeFS MOUNT notifications
NFSv4.1 use pnfs_device maxcount for the objectlayout gdia_maxcount
NFSv4.1 use pnfs_device maxcount for the blocklayout gdia_maxcount
NFSv4.1 Fix gdia_maxcount calculation to fit in ca_maxresponsesize
NFS: Improve legacy idmapping fallback
NFSv4.1 end back channel session draining
NFS: Apply v4.1 capabilities to v4.2
NFSv4.1: Clean up layout segment comparison helper names
NFSv4.1: layout segment comparison helpers should take 'const' parameters
NFSv4: Move the DNS resolver into the NFSv4 module
rpc_pipefs: only set rpc_dentry_ops if d_op isn't already set
...
Pull ext3 fix and quota cleanup from Jan Kara:
"A fix of ext3 error reporting from fsync and a quota cleanup"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Convert use of typedef ctl_table to struct ctl_table
ext3: Fix fsync error handling after filesystem abort.
Pull third set of VFS updates from Al Viro:
"Misc stuff all over the place. There will be one more pile in a
couple of days"
This is an "evil merge" that also uses the new d_count helper in
fs/configfs/dir.c, missed by commit 84d08fa888 ("helper for reading
->d_count")
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ncpfs: fix error return code in ncp_parse_options()
locks: move file_lock_list to a set of percpu hlist_heads and convert file_lock_lock to an lglock
seq_file: add seq_list_*_percpu helpers
f2fs: fix readdir incorrectness
mode_t whack-a-mole...
lustre: kill the pointless wrapper
helper for reading ->d_count
I was reviewing code which I suspected might allocate a zero size SG
table. That will cause memory corruption. Also we can't return before
doing the memset or we could end up using uninitialized memory in the
cleanup path.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do_device_access() is a function that abstracts copying SG list from/to
ramdisk storage (fake_storep).
It must deal with the ranges exceeding actual fake_storep size, because
such ranges are valid if virtual_gb is set greater than zero, and they
should be treated as fake_storep is repeatedly mirrored up to virtual
size.
Unfortunately, it can't deal with the range which wraps around the end of
fake_storep. A wrap around range is copied by two
sg_copy_{from,to}_buffer() calls, but sg_copy_{from,to}_buffer() can't
copy from/to in the middle of SG list, therefore the second call can't
copy correctly.
This fixes it by using sg_pcopy_{from,to}_buffer() that can copy from/to
the middle of SG list.
This also simplifies the assignment of sdb->resid in
fill_from_dev_buffer(). Because fill_from_dev_buffer() is now only called
once per command execution cycle. So it is not necessary to take care to
decrease sdb->resid if fill_from_dev_buffer() is called more than once.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Horia Geanta <horia.geanta@freescale.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use sg_pcopy_to_buffer() which is better than the function previously used.
Because it doesn't do kmap/kunmap for skipped pages.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Horia Geanta <horia.geanta@freescale.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The only difference between sg_pcopy_{from,to}_buffer() and
sg_copy_{from,to}_buffer() is an additional argument that specifies the
number of bytes to skip the SG list before copying.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Horia Geanta <horia.geanta@freescale.com>
Cc: Imre Deak <imre.deak@intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patchset introduces sg_pcopy_from_buffer() and sg_pcopy_to_buffer(),
which copy data between a linear buffer and an SG list.
The only difference between sg_pcopy_{from,to}_buffer() and
sg_copy_{from,to}_buffer() is an additional argument that specifies the
number of bytes to skip the SG list before copying.
The main reason for introducing these functions is to fix a problem in
scsi_debug module. And there is a local function in crypto/talitos
module, which can be replaced by sg_pcopy_to_buffer().
This patch:
sg_miter_get_next_page() is used to proceed page iterator to the next page
if necessary, and will be used to implement the variants of
sg_copy_{from,to}_buffer() later.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "James E.J. Bottomley" <JBottomley@parallels.com>
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Horia Geanta <horia.geanta@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for lz4 and lz4hc compression algorithm using the lib/lz4/*
codebase.
[akpm@linux-foundation.org: fix warnings]
Signed-off-by: Chanho Min <chanho.min@lge.com>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
Cc: Bob Pearson <rpearson@systemfabricworks.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Herbert Xu <herbert@gondor.hengli.com.au>
Cc: Yann Collet <yann.collet.73@gmail.com>
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patchset is for supporting LZ4 compression and the crypto API using
it.
As shown below, the size of data is a little bit bigger but compressing
speed is faster under the enabled unaligned memory access. We can use
lz4 de/compression through crypto API as well. Also, It will be useful
for another potential user of lz4 compression.
lz4 Compression Benchmark:
Compiler: ARM gcc 4.6.4
ARMv7, 1 GHz based board
Kernel: linux 3.4
Uncompressed data Size: 101 MB
Compressed Size compression Speed
LZO 72.1MB 32.1MB/s, 33.0MB/s(UA)
LZ4 75.1MB 30.4MB/s, 35.9MB/s(UA)
LZ4HC 59.8MB 2.4MB/s, 2.5MB/s(UA)
- UA: Unaligned memory Access support
- Latest patch set for LZO applied
This patch:
Add support for LZ4 compression in the Linux Kernel. LZ4 Compression APIs
for kernel are based on LZ4 implementation by Yann Collet and were changed
for kernel coding style.
LZ4 homepage : http://fastcompression.blogspot.com/p/lz4.html
LZ4 source repository : http://code.google.com/p/lz4/
svn revision : r90
Two APIs are added:
lz4_compress() support basic lz4 compression whereas lz4hc_compress()
support high compression or CPU performance get lower but compression
ratio get higher. Also, we require the pre-allocated working memory with
the defined size and destination buffer must be allocated with the size of
lz4_compressbound.
[akpm@linux-foundation.org: make lz4_compresshcctx() static]
Signed-off-by: Chanho Min <chanho.min@lge.com>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
Cc: Bob Pearson <rpearson@systemfabricworks.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Herbert Xu <herbert@gondor.hengli.com.au>
Cc: Yann Collet <yann.collet.73@gmail.com>
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for extracting LZ4-compressed kernel images, as well as
LZ4-compressed ramdisk images in the kernel boot process.
Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Yann Collet <yann.collet.73@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for LZ4 decompression in the Linux Kernel. LZ4 Decompression
APIs for kernel are based on LZ4 implementation by Yann Collet.
Benchmark Results(PATCH v3)
Compiler: Linaro ARM gcc 4.6.2
1. ARMv7, 1.5GHz based board
Kernel: linux 3.4
Uncompressed Kernel Size: 14MB
Compressed Size Decompression Speed
LZO 6.7MB 20.1MB/s, 25.2MB/s(UA)
LZ4 7.3MB 29.1MB/s, 45.6MB/s(UA)
2. ARMv7, 1.7GHz based board
Kernel: linux 3.7
Uncompressed Kernel Size: 14MB
Compressed Size Decompression Speed
LZO 6.0MB 34.1MB/s, 52.2MB/s(UA)
LZ4 6.5MB 86.7MB/s
- UA: Unaligned memory Access support
- Latest patch set for LZO applied
This patch set is for adding support for LZ4-compressed Kernel. LZ4 is a
very fast lossless compression algorithm and it also features an extremely
fast decoder [1].
But we have five of decompressors already and one question which does
arise, however, is that of where do we stop adding new ones? This issue
had been discussed and came to the conclusion [2].
Russell King said that we should have:
- one decompressor which is the fastest
- one decompressor for the highest compression ratio
- one popular decompressor (eg conventional gzip)
If we have a replacement one for one of these, then it should do exactly
that: replace it.
The benchmark shows that an 8% increase in image size vs a 66% increase
in decompression speed compared to LZO(which has been known as the
fastest decompressor in the Kernel). Therefore the "fast but may not be
small" compression title has clearly been taken by LZ4 [3].
[1] http://code.google.com/p/lz4/
[2] http://thread.gmane.org/gmane.linux.kbuild.devel/9157
[3] http://thread.gmane.org/gmane.linux.kbuild.devel/9347
LZ4 homepage: http://fastcompression.blogspot.com/p/lz4.html
LZ4 source repository: http://code.google.com/p/lz4/
Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Yann Collet <yann.collet.73@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some architectures need __c[lt]z[sd]i2() for __builtin_c[lt]z[ll] and
that causes a build failure. They can be implemented using the
fls()/__ffs() and overridden by linking arch-specific versions may not
be implemented yet.
This is required by "lib: add lz4 compressor module".
Reference: https://lkml.org/lkml/2013/4/18/603
Signed-off-by: Chanho Min <chanho.min@lge.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: "Darrick J. Wong" <djwong@us.ibm.com>
Cc: Bob Pearson <rpearson@systemfabricworks.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Herbert Xu <herbert@gondor.hengli.com.au>
Cc: Yann Collet <yann.collet.73@gmail.com>
Cc: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge together the unicore32, arm, and x86 reboot= command line
parameter handling.
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Preparing to move the parsing of reboot= to generic kernel code forces
the change in reboot_mode handling to use the enum.
[akpm@linux-foundation.org: fix arch/arm/mach-socfpga/socfpga.c]
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Prepare for the moving the parsing of reboot= to the generic kernel code
by making reboot_mode into a more generic form.
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These restart_mode fields are not used at all. Remove them to make
moving the reboot= cmdline options to the general kernel easier.
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Prepare for the moving the parsing of reboot= to the generic kernel code
by making reboot_mode into a more generic form.
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Prepare for the moving the parsing of reboot= to the generic kernel code
by making reboot_mode into a more generic form.
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Miguel Boton <mboton.lkml@gmail.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Get the new file to pass scripts/checkpatch.pl
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch is preparatory. It moves reboot related syscall, etc
functions from kernel/sys.c to kernel/reboot.c.
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove the prior patch's #define for easier backporting to the stable
releases.
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Russ Anderson <rja@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Graft AIX partitions enumeration into partitions/msdos.c
There is already a AIX disks detection logic in msdos.c. When an AIX disk
has been found, and if configured to, call the aix partitions recognizer.
This avoids removal of AIX disks protection from msdos.c, avoids code
duplication, and ensures that AIX partitions enumeration is called before
plain msdos partitions enumeration.
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Cc: Karel Zak <kzak@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add partitions/aix.h and partitions/aix.c.
AIX LVM permits to make "logical volumes" which are made of multiple
slices of multiple disks. The new code allows only access to the
"logical volumes" which are made of one slice on the probed disk, a
slice being a contiguous disk area. The code also detects "logical
volumes" made of multiple slices on the probed disk, but can not
describe them to the partition layer, because the partition layer
generic code does not support that. When such non-contiguous "logical
volumes" are detected, a diagnostic message is printed.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Cc: Karel Zak <kzak@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Smatch complains that on 64 bit systems, there is a hole in the
MW_ABILITIES struct between ->component_count and ->component_list[].
It leaks stack information from the mwave_ioctl() function.
I've added a memset() to initialize the struct to zero.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Greg KH <greg@kroah.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cleanup: Some minor points that I noticed while writing the previous
patches
1) The name try_atomic_semop() is misleading: The function performs the
operation (if it is possible).
2) Some documentation updates.
No real code change, a rename and documentation changes.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
sem_otime contains the time of the last semaphore operation that
completed successfully. Every operation updates this value, thus access
from multiple cpus can cause thrashing.
Therefore the patch replaces the variable with a per-semaphore variable.
The per-array sem_otime is only calculated when required.
No performance improvement on a single-socket i3 - only important for
larger systems.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are two places that can contain alter operations:
- the global queue: sma->pending_alter
- the per-semaphore queues: sma->sem_base[].pending_alter.
Since one of the queues must be processed first, this causes an odd
priorization of the wakeups: complex operations have priority over
simple ops.
The patch restores the behavior of linux <=3.0.9: The longest waiting
operation has the highest priority.
This is done by using only one queue:
- if there are complex ops, then sma->pending_alter is used.
- otherwise, the per-semaphore queues are used.
As a side effect, do_smart_update_queue() becomes much simpler: no more
goto logic.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce separate queues for operations that do not modify the
semaphore values. Advantages:
- Simpler logic in check_restart().
- Faster update_queue(): Right now, all wait-for-zero operations are
always tested, even if the semaphore value is not 0.
- wait-for-zero gets again priority, as in linux <=3.0.9
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As now each semaphore has its own spinlock and parallel operations are
possible, give each semaphore its own cacheline.
On a i3 laptop, this gives up to 28% better performance:
#semscale 10 | grep "interleave 2"
- before:
Cpus 1, interleave 2 delay 0: 36109234 in 10 secs
Cpus 2, interleave 2 delay 0: 55276317 in 10 secs
Cpus 3, interleave 2 delay 0: 62411025 in 10 secs
Cpus 4, interleave 2 delay 0: 81963928 in 10 secs
-after:
Cpus 1, interleave 2 delay 0: 35527306 in 10 secs
Cpus 2, interleave 2 delay 0: 70922909 in 10 secs <<< + 28%
Cpus 3, interleave 2 delay 0: 80518538 in 10 secs
Cpus 4, interleave 2 delay 0: 89115148 in 10 secs <<< + 8.7%
i3, with 2 cores and with hyperthreading enabled. Interleave 2 in order
use first the full cores. HT partially hides the delay from cacheline
trashing, thus the improvement is "only" 8.7% if 4 threads are running.
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Enforce that ipc_rcu_alloc returns a cacheline aligned pointer on SMP.
Rationale:
The SysV sem code tries to move the main spinlock into a seperate
cacheline (____cacheline_aligned_in_smp). This works only if
ipc_rcu_alloc returns cacheline aligned pointers. vmalloc and kmalloc
return cacheline algined pointers, the implementation of ipc_rcu_alloc
breaks that.
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can now drop the msg_lock and msg_lock_check functions along with a
bogus comment introduced previously in semctl_down.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do_msgrcv() is the last msg queue function that abuses the ipc lock Take
it only when needed when actually updating msq.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
do_msgsnd() is another function that does too many things with the ipc
object lock acquired. Take it only when needed when actually updating
msq.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While the INFO cmd doesn't take the ipc lock, the STAT commands do
acquire it unnecessarily. We can do the permissions and security checks
only holding the rcu lock.
This function now mimics semctl_nolock().
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add msq_obtain_object() and msq_obtain_object_check(), which will allow
us to get the ipc object without acquiring the lock. Just as with
semaphores, these functions are basically wrappers around
ipc_obtain_object*().
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Similar to semctl, when calling msgctl, the *_INFO and *_STAT commands
can be performed without acquiring the ipc object.
Add a msgctl_nolock() function and move the logic of *_INFO and *_STAT
out of msgctl(). This change still takes the lock and it will be
properly lockless in the next patch
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of holding the ipc lock for the entire function, use the
ipcctl_pre_down_nolock and only acquire the lock for specific commands:
RMID and SET.
Signed-off-by: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>