The reference manual for the i.MX28 recommends to calculate the divisor
as
divisor = (UARTCLK * 32) / baud rate, rounded to the nearest integer
, so let's do this. For a typical setup of UARTCLK = 24 MHz and baud
rate = 115200 this changes the divisor from 6666 to 6667 and so the
actual baud rate improves from 115211.521 Bd (error ≅ 0.01 %) to
115194.240 Bd (error ≅ 0.005 %).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 4cfffcfa51 ("irqchip/mips-gic: Fix local interrupts") added
mapping of several local interrupts during initialisation of the gic
driver. This associates virq numbers with these interrupts.
Unfortunately, as not all of the interrupts are mapped in hardware
order, when drivers subsequently request these interrupts they conflict
with the mappings that have already been set up. For example, this
manifests itself in the gic clocksource driver, which fails to probe
with the message:
clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0x7350c9738,
max_idle_ns: 440795203769 ns
GIC timer IRQ 25 setup failed: -22
This is because virq 25 (the correct IRQ number specified via device
tree) was allocated to the PERFCTR interrupt (and 24 to the timer, 26 to
the FDC). To fix this, map all of these local interrupts in the hardware
order so as to associate their virq numbers with the correct hw
interrupts.
Fixes: 4cfffcfa51 ("irqchip/mips-gic: Fix local interrupts")
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
On this Dell AIO machine, the lineout jack does not work.
We found the pin 0x1a is assigned to lineout on this machine, and in
the past, we applied ALC298_FIXUP_DELL1_MIC_NO_PRESENCE to fix the
heaset-set mic problem for this machine, this fixup will redefine
the pin 0x1a to headphone-mic, as a result the lineout doesn't
work anymore.
After consulting with Dell, they told us this machine doesn't support
microphone via headset jack, so we add a new fixup which only defines
the pin 0x18 as the headset-mic.
[rearranged the fixup insertion position by tiwai in order to make the
merge with other branches easier -- tiwai]
Fixes: 59ec4b57bc ("ALSA: hda - Fix headset mic detection problem for two dell machines")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sparse complains about missing forward declarations:
arch/x86/boot/compressed/error.c:8:6:
warning: symbol 'warn' was not declared. Should it be static?
arch/x86/boot/compressed/error.c:15:6:
warning: symbol 'error' was not declared. Should it be static?
Include the missing header file.
Signed-off-by: Zhengyi Shen <shenzhengyi@gmail.com>
Acked-by: Kess Cook <keescook@chromium.org>
Link: http://lkml.kernel.org/r/1490770820-24472-1-git-send-email-shenzhengyi@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
MCA bank 3 is reserved on systems pre-Fam17h, so it didn't have a name.
However, MCA bank 3 is defined on Fam17h systems and can be accessed
using legacy MSRs. Without a name we get a stack trace on Fam17h systems
when trying to register sysfs files for bank 3 on kernels that don't
recognize Scalable MCA.
Call MCA bank 3 "decode_unit" since this is what it represents on
Fam17h. This will allow kernels without SMCA support to see this bank on
Fam17h+ and prevent the stack trace. This will not affect older systems
since this bank is reserved on them, i.e. it'll be ignored.
Tested on AMD Fam15h and Fam17h systems.
WARNING: CPU: 26 PID: 1 at lib/kobject.c:210 kobject_add_internal
kobject: (ffff88085bb256c0): attempted to be registered with empty name!
...
Call Trace:
kobject_add_internal
kobject_add
kobject_create_and_add
threshold_create_device
threshold_init_device
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1490102285-3659-1-git-send-email-Yazen.Ghannam@amd.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Just one vc4 fix from Eric, cc: stable
* tag 'drm-misc-fixes-2017-03-31' of git://anongit.freedesktop.org/git/drm-misc:
drm/vc4: Allocate the right amount of space for boot-time CRTC state.
drm/i915 fixes for v4.11-rc5
* tag 'drm-intel-fixes-2017-03-29' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Restore marking context objects as dirty on pinning
drm/i915/gvt: Use force single submit flag to distinguish gvt request from i915 request
drm/i915/gvt: set shadow entry to scratch page while p2m failed
drm/i915/gvt: Fix guest fail to read EDID leading to black guest console issue.
drm/i915/gvt: fix wrong offset when loading RCS mocs
drm/i915/gvt: add write handler for mmio mbctl
drm/i915/kvmgt: Hold struct kvm reference
One small fix for radeon.
* 'drm-fixes-4.11' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: Override fpfn for all VRAM placements in radeon_evict_flags
a single fix to keep fence seqnos of completed jobs monotonically
increasing, as expected in various locations of the driver code. Also
tagged for stable.
* 'etnaviv/fixes' of https://git.pengutronix.de/git/lst/linux:
drm/etnaviv: (re-)protect fence allocation with GPU mutex
| CC lib/nmi_backtrace.o
| In file included from ../include/linux/kprobes.h:43:0,
| from ../lib/nmi_backtrace.c:17:
| ../arch/arc/include/asm/kprobes.h:57:13: warning: 'trap_is_kprobe' defined but not used [-Wunused-function]
| static void trap_is_kprobe(unsigned long address, struct pt_regs *regs)
| ^~~~~~~~~~~~~~
The warning started with 7d134b2ce6 ("kprobes: move kprobe declarations
to asm-generic/kprobes.h") which started including <asm/kprobes.h>
unconditionally into <linux/kprobes.h> exposing a stub function for
!CONFIG_KPROBES to rest of world. Fix that by making the stub a macro
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
As reported in STAR 9001165532, an SLC control reg read (for checking
busy state) right after SLC invalidate command may incorrectly return
NOT busy causing software to NOT spin-wait while operation is underway.
(and for some reason this only happens if L1 cache is also disabled - as
required by IOC programming model)
Suggested workaround is to do an additional Control Reg read, which
ensures the 2nd read gets the right status.
Cc: stable@vger.kernel.org #4.10
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
[vgupta: reworte changelog a bit]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
When __pa is applied to virtual address in uncached KSEG region the
result is incorrect. Fix it by checking if the original address is in
the uncached KSEG and adjusting the result. It looks better than masking
off bits because pfn_valid would correctly work with new __pa results
and it may be made working in noMMU case, once we get definition for
uncached memory view.
This is required for the dma_common_mmap and DMA debug code to work
correctly: they both indirectly use __pa with coherent DMA addresses.
In case of DMA debug the visible effect is false reports that an address
mapped for DMA is accessed by CPU.
Cc: stable@vger.kernel.org
Tested-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
The controller has different timings for MMC_TIMING_UHS_DDR50 and
MMC_TIMING_MMC_DDR52. Configuring the controller with SDHCI_CTRL_UHS_DDR50,
when MMC_TIMING_MMC_DDR52 timings are requested, is not correct and can
lead to unexpected behavior.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Fixes: bb5f8ea4d5 ("mmc: sdhci-of-at91: introduce driver for the Atmel SDMMC")
Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
SDIO cards may need clock to send the card interrupt to the host.
On a cherrytrail tablet with a RTL8723BS wifi chip, without this patch
pinging the tablet results in:
PING 192.168.1.14 (192.168.1.14) 56(84) bytes of data.
64 bytes from 192.168.1.14: icmp_seq=1 ttl=64 time=78.6 ms
64 bytes from 192.168.1.14: icmp_seq=2 ttl=64 time=1760 ms
64 bytes from 192.168.1.14: icmp_seq=3 ttl=64 time=753 ms
64 bytes from 192.168.1.14: icmp_seq=4 ttl=64 time=3.88 ms
64 bytes from 192.168.1.14: icmp_seq=5 ttl=64 time=795 ms
64 bytes from 192.168.1.14: icmp_seq=6 ttl=64 time=1841 ms
64 bytes from 192.168.1.14: icmp_seq=7 ttl=64 time=810 ms
64 bytes from 192.168.1.14: icmp_seq=8 ttl=64 time=1860 ms
64 bytes from 192.168.1.14: icmp_seq=9 ttl=64 time=812 ms
64 bytes from 192.168.1.14: icmp_seq=10 ttl=64 time=48.6 ms
Where as with this patch I get:
PING 192.168.1.14 (192.168.1.14) 56(84) bytes of data.
64 bytes from 192.168.1.14: icmp_seq=1 ttl=64 time=3.96 ms
64 bytes from 192.168.1.14: icmp_seq=2 ttl=64 time=1.97 ms
64 bytes from 192.168.1.14: icmp_seq=3 ttl=64 time=17.2 ms
64 bytes from 192.168.1.14: icmp_seq=4 ttl=64 time=2.46 ms
64 bytes from 192.168.1.14: icmp_seq=5 ttl=64 time=2.83 ms
64 bytes from 192.168.1.14: icmp_seq=6 ttl=64 time=1.40 ms
64 bytes from 192.168.1.14: icmp_seq=7 ttl=64 time=2.10 ms
64 bytes from 192.168.1.14: icmp_seq=8 ttl=64 time=1.40 ms
64 bytes from 192.168.1.14: icmp_seq=9 ttl=64 time=2.04 ms
64 bytes from 192.168.1.14: icmp_seq=10 ttl=64 time=1.40 ms
Cc: Dong Aisheng <b29396@freescale.com>
Cc: Ian W MORRISON <ianwmorrison@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Dong Aisheng <aisheng.dong@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
A relatively large pile of fixes for mainline, the first since the merge
window. The biggest block of changes here by volume is the sun8i-codec
set, the driver was newly added in the merge window but it was realized
that renaming some of the user visible controls was required so these
are being pushed for v4.11 to avoid the original code appearing in a
release. Otherwise it's all fairly standard bugfix stuff.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAljdNc0THGJyb29uaWVA
a2VybmVsLm9yZwAKCRAk1otyXVSH0IgMB/9SGwZvXPsI0w2q/f7pP4Q7SntvmywP
o+gyktSaC/nLDpdPkdOBMekzhpkzvEgJsg/07iop/J/qsYSgmRoT+UkGB5KMBYxS
aFse8ya9NavulcuCksINMr+kPrd9bMGzev0Y2v9p6nOAZ0Yhqoi0cK/JNeLH8WBE
amgWI7MbZ3vAR5jviKINw57crXsqeJcH7u1IkFNznhUb5MfzO7MdAby2nYnlFiTs
D7XeA/OV/cffwdsI5fylrD0zCd6DekZImjrv31nGi36DIZ275V4uDiN/XQFel069
cQc4CYLgMWXiXGZaRmxjqPZ/Om14VY6i17VsoriNhU8e5CtQlynOogV/
=k725
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.11
A relatively large pile of fixes for mainline, the first since the merge
window. The biggest block of changes here by volume is the sun8i-codec
set, the driver was newly added in the merge window but it was realized
that renaming some of the user visible controls was required so these
are being pushed for v4.11 to avoid the original code appearing in a
release. Otherwise it's all fairly standard bugfix stuff.
Upong receiving some errors (EACCES) on commit to the DS the code
doesn't fallback to MDS and intead retrieds to the same DS again.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Commit 5c492c3f52 ("arm64: smp: Add function to determine if cpus are
stuck in the kernel") added a helper function to determine if die() is
supported in cpu_ops. This function assumes a cpu will have a valid
cpu_ops entry, but that may not be the case for cpu0 is spin-table or
parking protocol is used to boot secondary cpus. In that case, there
is a NULL dereference if have_cpu_die() is called by cpu0. So add a
check for a valid cpu_ops before dereferencing it.
Fixes: 5c492c3f52 ("arm64: smp: Add function to determine if cpus are stuck in the kernel")
Signed-off-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Without this, the first modeset would dereference past the allocation
when trying to free the mm node.
Signed-off-by: Eric Anholt <eric@anholt.net>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170328201343.4884-1-eric@anholt.net
Fixes: d8dbf44f13 ("drm/vc4: Make the CRTCs cooperate on allocating display lists.")
Cc: <stable@vger.kernel.org> # v4.6+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Pull in changes for 4.11 from the i2c-mux subsubsystem:
"Here are some changes for the pca954x driver. It's a revert of the
un-endorsed ACPI support and a fixup in the handling of PCA9546."
The GCC '-maccumulate-outgoing-args' flag is enabled for most configs,
mostly because of issues which are no longer relevant. For most
configs, and with most recent versions of GCC, it's no longer needed.
Clarify which cases need it, and only enable it for those cases. Also
produce a compile-time error for the ftrace graph + mcount + '-Os' case,
which will otherwise cause runtime failures.
The main benefit of '-maccumulate-outgoing-args' is that it prevents an
ugly prologue for functions which have aligned stacks. But removing the
option also has some benefits: more readable argument saves, smaller
text size, and (presumably) slightly improved performance.
Here are the object size savings for 32-bit and 64-bit defconfig
kernels:
text data bss dec hex filename
10006710 3543328 1773568 15323606 e9d1d6 vmlinux.x86-32.before
9706358 3547424 1773568 15027350 e54c96 vmlinux.x86-32.after
text data bss dec hex filename
10652105 4537576 843776 16033457 f4a6b1 vmlinux.x86-64.before
10639629 4537576 843776 16020981 f475f5 vmlinux.x86-64.after
That comes out to a 3% text size improvement on x86-32 and a 0.1% text
size improvement on x86-64.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170316193133.zrj6gug53766m6nn@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit a544c619a5 ("HID: wacom: do not attempt to switch mode
while in probe") introduces delayed work for querying (setting the
mode) on all tablets. Bamboo Touch (056a:00d0) has a ghost
interface which claims to be a pen device. Though this device can
be removed, we have to set the mode on the ghost pen interface
before we remove it. After the aforementioned delay was introduced
the device was being removed before the mode setting could be
executed.
Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
A previous commit (below) adds a check for already probed interfaces to
Wacom's matching heuristic. Unfortunately this causes the Bamboo Pen
(CTL-460) to match itself to its 'ghost' touch interface. After
subsequent changes to the driver this match to the ghost causes the
kernel to crash. This patch avoids calling wacom_add_shared_data()
for the BAMBOO_PEN's ghost touch interface.
Fixes: 41372d5d40 ("HID: wacom: Augment 'oVid' and 'oPid' with heuristics for HID_GENERIC")
Cc: stable <stable@vger.kernel.org> # 4.9
Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commit fd2d2b191f ("s390: get_user() should zero on failure")
intended to fix s390's get_user() implementation which did not zero
the target operand if the read from user space faulted. Unfortunately
the patch has no effect: the corresponding inline assembly specifies
that the operand is only written to ("=") and the previous value is
discarded.
Therefore the compiler is free to and actually does omit the zero
initialization.
To fix this simply change the contraint modifier to "+", so the
compiler cannot omit the initialization anymore.
Fixes: c9ca78415a ("s390/uaccess: provide inline variants of get_user/put_user")
Fixes: fd2d2b191f ("s390: get_user() should zero on failure")
Cc: stable@vger.kernel.org
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Pull thermal management fixes from Zhang Rui:
- Fix a potential deadlock in cpu_cooling driver, which was introduced
in 4.11-rc1. (Matthew Wilcox)
- Fix the cpu_cooling and devfreq_cooling code to handle possible error
return value from OPP calls, together with three minor fixes in the
same patch series. (Viresh Kumar)
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal: cpu_cooling: Check OPP for errors
thermal: cpu_cooling: Replace dev_warn with dev_err
thermal: devfreq: Check OPP for errors
thermal: devfreq_cooling: Replace dev_warn with dev_err
thermal: devfreq: Simplify expression
thermal: Fix potential deadlock in cpu_cooling
Pull block fixes from Jens Axboe:
"Five fixes for this series:
- a fix from me to ensure that blk-mq drivers that terminate IO in
their ->queue_rq() handler by returning QUEUE_ERROR don't stall
with a scheduler enabled.
- four nbd fixes from Josef and Ratna, fixing various problems that
are critical enough to go in for this cycle. They have been well
tested"
* 'for-linus' of git://git.kernel.dk/linux-block:
nbd: replace kill_bdev() with __invalidate_device()
nbd: set queue timeout properly
nbd: set rq->errors to actual error code
nbd: handle ERESTARTSYS properly
blk-mq: include errors in did_work calculation
drv->cpumask defaults to cpu_possible_mask in __cpuidle_driver_init().
On PowerNV platform cpu_present could be less than cpu_possible in cases
where firmware detects the cpu, but it is not available to the OS. When
CONFIG_HOTPLUG_CPU=n, such cpus are not hotplugable at runtime and hence
we skip creating cpu_device.
This breaks cpuidle on powernv where register_cpu() is not called for
cpus in cpu_possible_mask that cannot be hot-added at runtime.
Trying cpuidle_register_device() on cpu without cpu_device will cause
crash like this:
cpu 0xf: Vector: 380 (Data SLB Access) at [c000000ff1503490]
pc: c00000000022c8bc: string+0x34/0x60
lr: c00000000022ed78: vsnprintf+0x284/0x42c
sp: c000000ff1503710
msr: 9000000000009033
dar: 6000000060000000
current = 0xc000000ff1480000
paca = 0xc00000000fe82d00 softe: 0 irq_happened: 0x01
pid = 1, comm = swapper/8
Linux version 4.11.0-rc2 (sv@sagarika) (gcc version 4.9.4
(Buildroot 2017.02-00004-gc28573e) ) #15 SMP Fri Mar 17 19:32:02 IST 2017
enter ? for help
[link register ] c00000000022ed78 vsnprintf+0x284/0x42c
[c000000ff1503710] c00000000022ebb8 vsnprintf+0xc4/0x42c (unreliable)
[c000000ff1503800] c00000000022ef40 vscnprintf+0x20/0x44
[c000000ff1503830] c0000000000ab61c vprintk_emit+0x94/0x2cc
[c000000ff15038a0] c0000000000acc9c vprintk_func+0x60/0x74
[c000000ff15038c0] c000000000619694 printk+0x38/0x4c
[c000000ff15038e0] c000000000224950 kobject_get+0x40/0x60
[c000000ff1503950] c00000000022507c kobject_add_internal+0x60/0x2c4
[c000000ff15039e0] c000000000225350 kobject_init_and_add+0x70/0x78
[c000000ff1503a60] c00000000053c288 cpuidle_add_sysfs+0x9c/0xe0
[c000000ff1503ae0] c00000000053aeac cpuidle_register_device+0xd4/0x12c
[c000000ff1503b30] c00000000053b108 cpuidle_register+0x98/0xcc
[c000000ff1503bc0] c00000000085eaf0 powernv_processor_idle_init+0x140/0x1e0
[c000000ff1503c60] c00000000000cd60 do_one_initcall+0xc0/0x15c
[c000000ff1503d20] c000000000833e84 kernel_init_freeable+0x1a0/0x25c
[c000000ff1503dc0] c00000000000d478 kernel_init+0x24/0x12c
[c000000ff1503e30] c00000000000b564 ret_from_kernel_thread+0x5c/0x78
This patch fixes the bug by passing correct cpumask from
powernv-cpuidle driver.
Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
[ rjw: Comment massage ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge xfrm_user validation fixes from Andy Whitcroft:
"Two patches we are applying to Ubuntu for XFRM_MSG_NEWAE validation
issue reported by ZDI.
The first of these is the primary fix, and the second is for a more
theoretical issue that Kees pointed out when reviewing the first"
* emailed patches from Andy Whitcroft <apw@canonical.com>:
xfrm_user: validate XFRM_MSG_NEWAE incoming ESN size harder
xfrm_user: validate XFRM_MSG_NEWAE XFRMA_REPLAY_ESN_VAL replay_window
Commit 73580dac76 ("parisc: Fix system shutdown halt") introduced an endless
loop for systems which don't provide a software power off function. But the
soft lockup detector will detect this and report stalled CPUs after some time.
Avoid those unwanted warnings by disabling the soft lockup detector.
Fixes: 73580dac76 ("parisc: Fix system shutdown halt")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 4.9+
Al Viro noticed that userspace accesses via get_user()/put_user() can be
simplified a lot with regard to usage of the exception handling.
This patch implements a fixup routine for get_user() and put_user() in such
that the exception handler will automatically load -EFAULT into the register
%r8 (the error value) in case on a fault on userspace. Additionally the fixup
routine will zero the target register on fault in case of a get_user() call.
The target register is extracted out of the faulting assembly instruction.
This patch brings a few benefits over the old implementation:
1. Exception handling gets much cleaner, easier and smaller in size.
2. Helper functions like fixup_get_user_skip_1 (all of fixup.S) can be dropped.
3. No need to hardcode %r9 as target register for get_user() any longer. This
helps the compiler register allocator and thus creates less assembler
statements.
4. No dependency on the exception_data contents any longer.
5. Nested faults will be handled cleanly.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Helge Deller <deller@gmx.de>
pa_memcpy() is the major memcpy implementation in the parisc kernel which is
used to do any kind of userspace/kernel memory copies.
Al Viro noticed various bugs in the implementation of pa_mempcy(), most notably
that in case of faults it may report back to have copied more bytes than it
actually did.
Fixing those bugs is quite hard in the C-implementation, because the compiler
is messing around with the registers and we are not guaranteed that specific
variables are always in the same processor registers. This makes proper fault
handling complicated.
This patch implements pa_memcpy() in assembler. That way we have correct fault
handling and adding a 64-bit copy routine was quite easy.
Runtime tested with 32- and 64bit kernels.
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Merge PTRACE_SETREGSET leakage fixes from Dave Martin:
"This series is the collection of fixes I proposed on this topic, that
have not yet appeared upstream or in the stable branches,
The issue can leak kernel stack, but doesn't appear to allow userspace
to attack the kernel directly. The affected architectures are c6x,
h8300, metag, mips and sparc.
[ Mark Salter points out that c6x has no MMU or other mechanism to
prevent userspace access to kernel code or data on c6x, but it
doesn't hurt to clean that case up too. ]
The bugs arise from use of user_regset_copyin(). Users of
user_regset_copyin() can work in one of two ways:
1) Copy directly to thread_struct or equivalent. (This seems to be
the design assumption of the regset API, and is the most common
approach.)
2) Copy to a local variable and then transfer to thread_struct. (A
significant minority of cases.)
Buggy code typically involves approach 2"
* emailed patches from Dave Martin <Dave.Martin@arm.com>:
sparc/ptrace: Preserve previous registers for short regset write
mips/ptrace: Preserve previous registers for short regset write
metag/ptrace: Reject partial NT_METAG_RPIPE writes
metag/ptrace: Provide default TXSTATUS for short NT_PRSTATUS
metag/ptrace: Preserve previous registers for short regset write
h8300/ptrace: Fix incorrect register transfer count
c6x/ptrace: Remove useless PTRACE_SETREGSET implementation
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill all the registers, the thread's old registers are preserved.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill all the registers, the thread's old registers are preserved.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's not clear what behaviour is sensible when doing partial write of
NT_METAG_RPIPE, so just don't bother.
This patch assumes that userspace will never rely on a partial SETREGSET
in this case, since it's not clear what should happen anyway.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill TXSTATUS, a well-defined default value is used, based on the
task's current value.
Suggested-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ensure that if userspace supplies insufficient data to PTRACE_SETREGSET
to fill all the registers, the thread's old registers are preserved.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
regs_set() and regs_get() are vulnerable to an off-by-1 buffer overrun
if CONFIG_CPU_H8S is set, since this adds an extra entry to
register_offset[] but not to user_regs_struct.
So, iterate over user_regs_struct based on its actual size, not based on
the length of register_offset[].
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gpr_set won't work correctly and can never have been tested, and the
correct behaviour is not clear due to the endianness-dependent task
layout.
So, just remove it. The core code will now return -EOPNOTSUPPORT when
trying to set NT_PRSTATUS on this architecture until/unless a correct
implementation is supplied.
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kees Cook has pointed out that xfrm_replay_state_esn_len() is subject to
wrapping issues. To ensure we are correctly ensuring that the two ESN
structures are the same size compare both the overall size as reported
by xfrm_replay_state_esn_len() and the internal length are the same.
CVE-2017-7184
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a new xfrm state is created during an XFRM_MSG_NEWSA call we
validate the user supplied replay_esn to ensure that the size is valid
and to ensure that the replay_window size is within the allocated
buffer. However later it is possible to update this replay_esn via a
XFRM_MSG_NEWAE call. There we again validate the size of the supplied
buffer matches the existing state and if so inject the contents. We do
not at this point check that the replay_window is within the allocated
memory. This leads to out-of-bounds reads and writes triggered by
netlink packets. This leads to memory corruption and the potential for
priviledge escalation.
We already attempt to validate the incoming replay information in
xfrm_new_ae() via xfrm_replay_verify_len(). This confirms that the user
is not trying to change the size of the replay state buffer which
includes the replay_esn. It however does not check the replay_window
remains within that buffer. Add validation of the contained
replay_window.
CVE-2017-7184
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The fence allocation needs to be protected by the GPU mutex, otherwise
the fence seqnos of concurrent submits might not match the insertion order
of the jobs in the kernel ring. This breaks the assumption that jobs
complete with monotonically increasing fence seqnos.
Fixes: d985349017 (drm/etnaviv: take GPU lock later in the submit process)
CC: stable@vger.kernel.org #4.9+
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
This isn't super serious because you need CAP_ADMIN to run this code.
I added this integer overflow check last year but apparently I am
rubbish at writing integer overflow checks... There are two issues.
First, access_ok() works on unsigned long type and not u64 so on 32 bit
systems the access_ok() could be checking a truncated size. The other
issue is that we should be using a stricter limit so we don't overflow
the kzalloc() setting ctx->clone_roots later in the function after the
access_ok():
alloc_size = sizeof(struct clone_root) * (arg->clone_sources_count + 1);
sctx->clone_roots = kzalloc(alloc_size, GFP_KERNEL | __GFP_NOWARN);
Fixes: f5ecec3ce2 ("btrfs: send: silence an integer overflow warning")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ added comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
Using an int value is causing qg->reserved to become negative and
exclusive -EDQUOT to be reached prematurely.
This affects exclusive qgroups only.
TEST CASE:
DEVICE=/dev/vdb
MOUNTPOINT=/mnt
SUBVOL=$MOUNTPOINT/tmp
umount $SUBVOL
umount $MOUNTPOINT
mkfs.btrfs -f $DEVICE
mount /dev/vdb $MOUNTPOINT
btrfs quota enable $MOUNTPOINT
btrfs subvol create $SUBVOL
umount $MOUNTPOINT
mount /dev/vdb $MOUNTPOINT
mount -o subvol=tmp $DEVICE $SUBVOL
btrfs qgroup limit -e 3G $SUBVOL
btrfs quota rescan /mnt -w
for i in `seq 1 44000`; do
dd if=/dev/zero of=/mnt/tmp/test_$i bs=10k count=1
if [[ $? > 0 ]]; then
btrfs qgroup show -pcref $SUBVOL
exit 1
fi
done
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
[ add reproducer to changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 20a7db8ab3 ("btrfs: add dummy callback for readpage_io_failed
and drop checks") made a cleanup around readpage_io_failed_hook, and
it was supposed to keep the original sematics, but it also
unexpectedly disabled repair during read for dup, raid1 and raid10.
This fixes the problem by letting data's inode call the generic
readpage_io_failed callback by returning -EAGAIN from its
readpage_io_failed_hook in order to notify end_bio_extent_readpage to
do the rest. We don't call it directly because the generic one takes
an offset from end_bio_extent_readpage() to calculate the index in the
checksum array and inode's readpage_io_failed_hook doesn't offer that
offset.
Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ keep the const function attribute ]
Signed-off-by: David Sterba <dsterba@suse.com>
