There was no easy way to see the frequency used, and with the change of
default, we better provide one.
[root@sandy linux]# perf evlist -F
cycles: sample_freq=4000
[root@sandy linux]# perf evlist -v
cycles: sample_freq=4000, size: 80, sample_type: 391, read_format: 7, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, sample_id_all: 1, exclude_guest: 1
[root@sandy linux]#
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-e1p9poez3nwrgycbmwqmhlsu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Quoting Ingo:
"While at it I'd also suggest increasing the default sampling frequency,
from 1000 Hz per CPU to at least 4Khz auto-freq or so - this should work
well all across the board I think. CPUs are getting faster and command/app
run times are getting shorter, 1Khz is a bit low IMO."
Requested-by: Ingo Molnar <mingo@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-2jafa6mkrufyekny9ei59lpu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In order for perf buildid-list to work with pipe-mode files, it needs to
process buildids and event attr structs.
$ perf record -o - noploop 2 | ./perf inject -b | perf buildid-list -i - -H
noploop for 2 seconds
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.084 MB - (~3678 samples) ]
0000000000000000000000000000000000000000 [kernel.kallsyms]
3a0d0629efe74a8da3eeba372cdbd74ad9b8f5d5 /usr/local/bin/noploop
The reason [kernel.kallsyms] shows a 0 build-id comes from the
way buildids are injected in the stream.
The buildid for the kernel is provided by a BUILD_ID record. The
[kernel.kallsyms] is provided by a MMAP record. There is no clean and
obvious way to link the two, unfortunately.
In regular mode, the kernel buildid is generated from reading the ELF
image or kallsyms and perf knows to associate [kernel.kallsyms] to it.
Later on, when perf processes the [kernel.kallsyms] MMAP record, it will
already have a dso for it.
So for now, make sure perf buildid-list shows the buildids for
everything but the kernel image.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1337081295-10303-6-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In __perf_session__process_pipe_events(), there was a risk we would read
more than what a union perf_event struct can hold. this could happen in
case, perf is reading a file which contains new record types it does not
know about and which are larger than anything it knows about.
In general, perf is supposed to skip records it does not understand, but
in pipe mode, those have to be read and ignored. The fixed size header
contains the size of the record, but that size may be larger than union
perf_event, yet it was used as the backing to the read in:
union perf_event event;
void *p;
size = event->header.size;
p = &event;
p += sizeof(struct perf_event_header);
if (size - sizeof(struct perf_event_header)) {
err = readn(self->fd, p, size - sizeof(struct perf_event_header));
We fix this by allocating a buffer based on the size reported in the
header. We reuse the buffer as much as we can. We realloc in case it
becomes too small. In the common case, the performance impact is
negligible.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1337081295-10303-3-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf inject -b was broken. It would not inject any build_id into the
stream. Furthermore, it would strip samples from the stream.
The reason was a missing initialization of the event attribute
structure. The perf_tool.tool.attr() callback was pointing to a simple
repipe. But there was no initialization of the internal data structures
to keep track of events and event ids. That later caused event id
lookups to fail, and sample would get removed.
The patch simply adds back the call to perf_event__process_attr() to
initialize the evlist structure and now build_ids are again injected.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1337081295-10303-2-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To match the PERF_RECORD_HEADER_TRACING_DATA record type.
This is the same info as the one used for pipe mode whereas the other
one is for regular file output. This will help in the later patch to add
meta-data infos in pipe mode.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1337081295-10303-4-git-send-email-eranian@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following union:
union {
u64 val64;
u32 val32[2];
} u;
is used on more than one place in perf code and will be used more in
upcomming patches.
Adding union u64_swap to have it defined globaly so we dont need to
redefine it all the time.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337151548-2396-4-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the perf data file is read cross architectures, the
perf_event__attr_swap function takes care about endianness of all the
struct fields except the bitfield flags.
The bitfield flags need to be transformed as well, since the bitfield
binary storage differs for both endians.
ABI says:
Bit-fields are allocated from right to left (least to most significant)
on little-endian implementations and from left to right (most to least
significant) on big-endian implementations.
The above seems to be byte specific, so we need to reverse each byte of
the bitfield. 'Internet' also says this might be implementation specific
and we probably need proper fix and carry perf_event_attr bitfield flags
in separate data file FEAT_ section. Thought this seems to work for now.
Note, running following to test perf endianity handling:
test 1)
- origin system:
# perf record -a -- sleep 10 (any perf record will do)
# perf report > report.origin
# perf archive perf.data
- copy the perf.data, report.origin and perf.data.tar.bz2
to a target system and run:
# tar xjvf perf.data.tar.bz2 -C ~/.debug
# perf report > report.target
# diff -u report.origin report.target
- the diff should produce no output
(besides some white space stuff and possibly different
date/TZ output)
test 2)
- origin system:
# perf record -ag -fo /tmp/perf.data -- sleep 1
- mount origin system root to the target system on /mnt/origin
- target system:
# perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \
--kallsyms /mnt/origin/proc/kallsyms
- complete perf.data header is displayed
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337151548-2396-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add PERF_SAMPLE_CPU flag into attr->sample_type if an user specified any
of cpu target (either system-wide or cpu list).
It will show correct values when cpu sort key is given for perf top and
perf report.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337564527-9367-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Although perf depends on the libtraceevent, it cannot know when it needs
to be rebuilt. So just try to rebuild it always in order to make sure we
use the latest version.
While at it, silence annoying directory change messages.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1337677434-4881-2-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Change some variable names according to new library name.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1337677434-4881-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While migrating to the libtraceevent, the perl scripting engine
missed this structure rename.
This fixes:
util/scripting-engines/trace-event-perl.c: In function "find_cache_event":
util/scripting-engines/trace-event-perl.c:244: error: assignment from incompatible pointer type
util/scripting-engines/trace-event-perl.c:248: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c:248: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c:250: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c: In function "perl_process_tracepoint":
util/scripting-engines/trace-event-perl.c:286: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c:286: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c:307: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c: In function "perl_generate_script":
util/scripting-engines/trace-event-perl.c:498: error: passing argument 1 of "trace_find_next_event" from incompatible pointer type
util/scripting-engines/../trace-event.h:56: note: expected "struct event_format *" but argument is of type "struct event *"
util/scripting-engines/trace-event-perl.c:498: error: assignment from incompatible pointer type
util/scripting-engines/trace-event-perl.c:499: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c:499: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c:513: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c:532: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c:556: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c:569: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c:570: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c:579: error: dereferencing pointer to incomplete type
util/scripting-engines/trace-event-perl.c:580: error: dereferencing pointer to incomplete type
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/r/1337697049-30251-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Handle the print argument types brought by the new libparsevent in perl
scripting engine.
PRINT_BSTRING and PRINT_DYNAMIC_ARRAY are treated just like strings
and thus don't require specific processing.
But PRINT_FUNC need specific plugins which are not yet handled, lets
warn if we meet this case.
This fixes:
util/scripting-engines/trace-event-perl.c: In function define_event_symbol:
util/scripting-engines/trace-event-perl.c:188: error: enumeration value PRINT_BSTRING not handled in switch
util/scripting-engines/trace-event-perl.c:188: error: enumeration value PRINT_DYNAMIC_ARRAY not handled in switch
util/scripting-engines/trace-event-perl.c:188: error: enumeration value PRINT_FUNC not handled in switch
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Frederic Weisbecker <fweisbec@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Link: http://lkml.kernel.org/r/1337697049-30251-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding a new hardcoded term 'name' allowing to specify a name for the
pmu event. The term is defined along with standard pmu terms. If no
'name' term is given, the event name follows following template:
"raw 0x<perf_event_attr::config>"
running:
perf stat -e cpu/config=1,name=krava1/u ls
will produce following output:
...
Performance counter stats for 'ls':
0 krava1
...
running:
perf stat -e cpu/config=1/u ls
will produce following output:
...
Performance counter stats for 'ls':
0 raw 0x1
...
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337584373-2741-6-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Separating 'mem:' scanner processing, so we can parse out modifier
specifically and dont clash with other rules.
This is just precaution for the future, so we dont need to worry about
the rules clashing where we need to parse out any sub-rule of global
rules.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337584373-2741-5-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Switch from using static temporary event list into dynamically allocated
one. This way we dont need to pass temp list to the parse_events_parse
which makes the interface more clear.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337584373-2741-4-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding PARSER_DEBUG Makefile variable to enable building event scanner/
parser with debug enabled. This results in verbose output right out of
the scanner/parser.
It's useful for debuging the event parser. Keeping this only for event
parser so far.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337584373-2741-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving event parsing specific tests into separated file:
util/parse-events-test.c
Also changing the code a bit to ease running separate tests.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337584373-2741-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Conflicts:
tools/perf/Makefile
This tree from Frederic unifies the perf and trace-cmd trace event format
parsing code into a single library.
Powertop and other tools will also be able to make use of it.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Fixes for perf/core:
- Rename some perf_target methods to avoid double negation, from Namhyung Kim.
- Revert change to use per task events with inheritance, from Namhyung Kim.
- Events should start disabled till children starts running, from David Ahern.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Make sure that the state of buffer_size_kb is initialized correctly and
returns actual size of the ring buffer.
Link: http://lkml.kernel.org/r/1336066834-1673-1-git-send-email-vnagarnaik@google.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Laurent Chavey <chavey@google.com>
Cc: Justin Teravest <teravest@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There are 2 separate loops to resize cpu buffers that are online and
offline. Merge them to make the code look better.
Also change the name from update_completion to update_done to allow
shorter lines.
Link: http://lkml.kernel.org/r/1337372991-14783-1-git-send-email-vnagarnaik@google.com
Cc: Laurent Chavey <chavey@google.com>
Cc: Justin Teravest <teravest@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
764e16a changed perf-record to create events disabled by default and
enable them once perf initializations are done. This setting was dropped
by 0f82ebc. Now perf events are once again generated during perf's
initialization phase (e.g., generating maps).
As an example, perf opens a lot of files at startup. Unpatched:
perf record -e syscalls:sys_enter_open -ga -fo /tmp/perf.data -- sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.087 MB /tmp/perf.data (~3798 samples) ]
Using perf-script to look at the samples shows the perf command generating
563 of the 566 total events.
Patched:
perf record -e syscalls:sys_enter_open -ga -fo /tmp/perf.data -- sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.028 MB /tmp/perf.data (~1206 samples) ]
Using perf-script to look at the samples does not show perf command.
Signed-off-by: David Ahern <dsahern@gmail.com>
Link: http://lkml.kernel.org/r/1336968088-11531-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Merge reason: We are going to queue up a dependent patch:
"perf tools: Move parse event automated tests to separated object"
That depends on:
commit e7c72d8
perf tools: Add 'G' and 'H' modifiers to event parsing
Conflicts:
tools/perf/builtin-stat.c
Conflicted with the recent 'perf_target' patches when checking the
result of perf_evsel open routines to see if a retry is needed to cope
with older kernels where the exclude guest/host perf_event_attr bits
were not used.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introducing type_val and type_term for term instead of a single type
value. Currently the term type marked out the value type as well.
With this change we can have future string term values being specified
by user and translated into proper number along the processing.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1335371102-11358-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The callchain address is stored as u64. Current code uses following
format string to display callchain address:
"%p\n", (void *)(long)chain->ip
This way we lose upper 32 bits if we report 64 bit addresses in 32 bit
environment. Fixing this to always display whole 64 bits.
Note, running following to test perf endianity handling:
test 1)
- origin system:
# perf record -a -- sleep 10 (any perf record will do)
# perf report > report.origin
# perf archive perf.data
- copy the perf.data, report.origin and perf.data.tar.bz2
to a target system and run:
# tar xjvf perf.data.tar.bz2 -C ~/.debug
# perf report > report.target
# diff -u report.origin report.target
- the diff should produce no output
(besides some white space stuff and possibly different
date/TZ output)
test 2)
- origin system:
# perf record -ag -fo /tmp/perf.data -- sleep 1
- mount origin system root to the target system on /mnt/origin
- target system:
# perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \
--kallsyms /mnt/origin/proc/kallsyms
- complete perf.data header is displayed
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337151548-2396-8-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If perf doesn't mmap on event (like perf stat), it should not create
per-task-per-cpu events. So just use a dummy cpu map to create a
per-task event for this case.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337161549-9870-3-git-send-email-namhyung.kim@lge.com
[ committer note: renamed .need_mmap to .uses_mmap ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The function tracer will enable the -pg option with gcc, which requires
that frame pointers. When FRAME_POINTER is defined in the kernel config
it adds the gcc option -fno-omit-frame-pointer which causes some problems
on some architectures. For those architectures, the FRAME_POINTER select
was not set.
When FUNCTION_TRACER was selected on these architectures that can not have
-fno-omit-frame-pointer, the -pg option is still set. But when
FRAME_POINTER is not selected, the kernel config would add the gcc option
-fomit-frame-pointer. Adding this option is incompatible with -pg
even on archs that do not need frame pointers with -pg.
The answer to this was to just not add either -fno-omit-frame-pointer
or -fomit-frame-pointer on these archs that want function tracing
but do not set FRAME_POINTER.
As it turns out, for archs that require frame pointers for function
tracing, the same can be used. If gcc requires frame pointers with
-pg, it will simply add it. The best thing to do is not select FRAME_POINTER
when function tracing is selected, and let gcc add it if needed.
Only add the -fno-omit-frame-pointer when something else selects
FRAME_POINTER, but do not add -fomit-frame-pointer if function tracing
is selected.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
To remove duplicate code, have the ftrace arch_ftrace_update_code()
use the generic ftrace_modify_all_code(). This requires that the
default ftrace_replace_code() becomes a weak function so that an
arch may override it.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Rename __ftrace_modify_code() to ftrace_modify_all_code() and make
it global for all archs to use. This will remove the duplication
of code, as archs that can modify code without stop_machine()
can use it directly outside of the stop_machine() call.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
ftrace_location() is passed an addr, and returns 1 if the addr is
on a ftrace nop (or caller to ftrace_caller), and 0 otherwise.
To let kprobes know if it should move a breakpoint or not, it
must return the actual addr that is the start of the ftrace nop.
This way a kprobe placed on the location of a ftrace nop, can
instead be placed on the instruction after the nop. Even if the
probe addr is on the second or later byte of the nop, it can
simply be moved forward.
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Both ftrace_location() and ftrace_text_reserved() do basically the same thing.
They search to see if an address is in the ftace table (contains an address
that may change from nop to call ftrace_caller). The difference is
that ftrace_location() searches a single address, but ftrace_text_reserved()
searches a range.
This also makes the ftrace_text_reserved() faster as it now uses a bsearch()
instead of linearly searching all the addresses within a page.
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As all records in a page of the ftrace table are sorted, we can
speed up the search algorithm by checking if the address to look for
falls in between the first and last record ip on the page.
This speeds up both the ftrace_location() and ftrace_text_reserved()
algorithms, as it can skip full pages when the search address is
not in them.
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ftrace_record_ip() and ftrace_alloc_dyn_node() were from the
time of the ftrace daemon. Although they were still used, they
still make things a bit more complex than necessary.
Move the code into the one function that uses it, and remove the
helper functions.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Instead of just sorting the ip's of the functions per ftrace page,
sort the entire list before adding them to the ftrace pages.
This will allow the bsearch algorithm to be sped up as it can
also sort by pages, not just records within a page.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
According to Documentation/trace/ftrace.txt:
tracing_cpumask:
This is a mask that lets the user only trace
on specified CPUS. The format is a hex string
representing the CPUS.
The tracing_cpumask currently doesn't affect the tracing state of
per-CPU ring buffers.
This patch enables/disables CPU recording as its corresponding bit in
tracing_cpumask is set/unset.
Link: http://lkml.kernel.org/r/1336096792-25373-3-git-send-email-vnagarnaik@google.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Laurent Chavey <chavey@google.com>
Cc: Justin Teravest <teravest@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
If tracing_dentry_percpu() failed, tracing_init_debugfs_percpu()
will try to create each cpu directories on debugfs' root directory
as d_percpu is NULL.
Link: http://lkml.kernel.org/r/1335143517-2285-1-git-send-email-namhyung.kim@lge.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When the ring buffer does its consistency test on itself, it
removes the head page, runs the tests, and then adds it back
to what the "head_page" pointer was. But because the head_page
pointer may lack behind the real head page (held by the link
list pointer). The reset may be incorrect.
Instead, if the head_page exists (it does not on first allocation)
reset it back to the real head page before running the consistency
tests. Then it will be put back to its original location after
the tests are complete.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
There use to be ring buffer integrity checks after updating the
size of the ring buffer. But now that the ring buffer can modify
the size while the system is running, the integrity checks were
removed, as they require the ring buffer to be disabed to perform
the check.
Move the integrity check to the reading of the ring buffer via the
iterator reads (the "trace" file). As reading via an iterator requires
disabling the ring buffer, it is a perfect place to have it.
If the ring buffer happens to be disabled when updating the size,
we still perform the integrity check.
Cc: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds the capability to add new pages to a ring buffer
atomically while write operations are going on. This makes it possible
to expand the ring buffer size without reinitializing the ring buffer.
The new pages are attached between the head page and its previous page.
Link: http://lkml.kernel.org/r/1336096792-25373-2-git-send-email-vnagarnaik@google.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Laurent Chavey <chavey@google.com>
Cc: Justin Teravest <teravest@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
This patch adds the capability to remove pages from a ring buffer
without destroying any existing data in it.
This is done by removing the pages after the tail page. This makes sure
that first all the empty pages in the ring buffer are removed. If the
head page is one in the list of pages to be removed, then the page after
the removed ones is made the head page. This removes the oldest data
from the ring buffer and keeps the latest data around to be read.
To do this in a non-racey manner, tracing is stopped for a very short
time while the pages to be removed are identified and unlinked from the
ring buffer. The pages are freed after the tracing is restarted to
minimize the time needed to stop tracing.
The context in which the pages from the per-cpu ring buffer are removed
runs on the respective CPU. This minimizes the events not traced to only
NMI trace contexts.
Link: http://lkml.kernel.org/r/1336096792-25373-1-git-send-email-vnagarnaik@google.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Laurent Chavey <chavey@google.com>
Cc: Justin Teravest <teravest@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
On gcc 4.5 the function tracing_mark_write() would give a warning
of page2 being uninitialized. This is due to a bug in gcc because
the logic prevents page2 from being used uninitialized, and
gcc 4.6+ does not complain (correctly).
Instead of adding a "unitialized" around page2, which could show
a bug later on, I combined page1 and page2 into an array map_pages[].
This binds the two and the two are modified according to nr_pages
(what gcc 4.5 seems to ignore). This no longer gives a warning with
gcc 4.5 nor with gcc 4.6.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The commit 55261f4670 ("perf evlist: Fix creation of cpu map") changed
to create a per-task event when no cpu target is specified. However it
caused a problem since perf-task do not allow event inheritance due to
scalability issues so that the result will contain samples only from
parent, not from its children.
So we should use perf-task-per-cpu events anyway to get the right
result. Revert it.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Analysed-by: Ingo Molnar <mingo@kernel.org>
Acked-and-tested-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337161549-9870-2-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename perf_target__no_{cpu,task} to perf_target__has_{cpu,task} because
it's more intuitive and easy to parse (for human beings) when used with
negation.
The names are came out from David Ahern. It is intended to be a
mechanical substitution without any functional change.
The perf_target__none remains unchanged since I couldn't find a right
name and it is hardly used with negation.
Signed-off-by: Namhyung Kim <namhyung.kim@lge.com>
Suggested-by: David Ahern <dsahern@gmail.com>
Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337161549-9870-1-git-send-email-namhyung.kim@lge.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fixing i386 allnoconfig built errors:
arch/x86/built-in.o: In function `amd_pmu_hw_config':
perf_event_amd.c:(.text+0xc3e1): undefined reference to `get_ibs_caps'
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
More like Linus', but hey at least an attempt at implementing a suggestion by
Arjan made this time around!
. Fix indirect calls beautifier, reported by Linus.
. Use the objdump comments to nuke specificities about how access to a well
know variable is encoded, suggested by Linus.
. Show the number of places that jump to a target, requested by Arjan.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)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=cE1R
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Arjan & Linus Annotation Edition
- Fix indirect calls beautifier, reported by Linus.
- Use the objdump comments to nuke specificities about how access to a well
know variable is encoded, suggested by Linus.
- Show the number of places that jump to a target, requested by Arjan.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
