Red Hat BZ 211914
The previous patch "[DLM] fix aborted recovery during
node removal" was incomplete as discovered with further testing. It set
the bit for the RS_LOCKS barrier but did not then wait for the barrier.
This is often ok, but sometimes it will cause yet another recovery hang.
If it's a new node that also has the lowest nodeid that skips the barrier
wait, then it misses the important step of collecting and reporting the
barrier status from the other nodes (which is the job of the low nodeid in
the barrier wait routine).
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Red Hat BZ 211914
When many nodes are joining a lockspace simultaneously, the dlm gets a
quick sequence of stop/start events, a pair for adding each node.
dlm_controld in user space sends dlm_recoverd in the kernel each stop and
start event. dlm_controld will sometimes send the stop before
dlm_recoverd has had a chance to take up the previously queued start. The
stop aborts the processing of the previous start by setting the
RECOVERY_STOP flag. dlm_recoverd is erroneously clearing this flag and
ignoring the stop/abort if it happens to take up the start after the stop
meant to abort it. The fix is to check the sequence number that's
incremented for each stop/start before clearing the flag.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Red Hat BZ 211914
With the new cluster infrastructure, dlm recovery for a node removal can
be aborted and restarted for a node addition. When this happens, the
restarted recovery isn't aware that it's doing recovery for the earlier
removal as well as the addition. So, it then skips the recovery steps
only required when nodes are removed. This can result in locks not being
purged for failed/removed nodes. The fix is to check for removed nodes
for which recovery has not been completed at the start of a new recovery
sequence.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Red Hat BZ 211914
There's a race between dlm_recoverd (1) enabling locking and (2) clearing
out the requestqueue, and dlm_recvd (1) checking if locking is enabled and
(2) adding a message to the requestqueue. An order of recoverd(1),
recvd(1), recvd(2), recoverd(2) will result in a message being left on the
requestqueue. The fix is to have dlm_recvd check if dlm_recoverd has
enabled locking after taking the mutex for the requestqueue and if it has
processing the message instead of queueing it.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Red Hat BZ 213682
If two nodes leave the lockspace (while unmounting the fs in the case of
gfs) after one has sent a STATUS message to the other, STATUS/STATUS_REPLY
messages will then ping-pong between the nodes when neither of them can
find the lockspace in question any longer. We kill this by not sending
another STATUS message when we get a STATUS_REPLY for an unknown
lockspace.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Red Hat BZ 213684
If a node sends an lkb to the new master (RCOM_LOCK message) during
recovery and recovery is then aborted on both nodes before it gets a
reply, the res_recover_locks_count needs to be reset to 0 so that when the
subsequent recovery comes along and sends the lkb to the new master again
the assertion doesn't trigger that checks that counter is zero.
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The following patch adds a TCP based communications layer
to the DLM which is compile time selectable. The existing SCTP
layer gives the advantage of allowing multihoming, whereas
the TCP layer has been heavily tested in previous versions of
the DLM and is known to be robust and therefore can be used as
a baseline for performance testing.
Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Stuffed files only consist of a maximum of
(gfs2 block size - sizeof(struct gfs2_dinode)) bytes. Since the
gfs2 block size is always less than page size, we will never see
a call to stuffed_readpage for anything other than the first page
in the file.
Signed-off-by: Russell Cattelan <cattelan@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The log lock is dropped prior to io submittion, but
this exposes a hole in which the log data structures
may be going away due to a truncate.
Store the buffer head in a local pointer prior to
dropping the lock and relay on the buffer_head lock
for consitency on the buffer head.
Signed-Off-By: Russell Cattelan <cattelan@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This function wasn't really doing the right thing. There was no need
to update the inode size at this point and the updating of the
i_blocks field has now been moved to the places where di_blocks is
updated. A result of this patch and some those preceeding it is that
unlocking a glock is now a much more efficient process, since there
is no longer any requirement to copy data from the gfs2 inode into
the vfs inode at this point.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Since the inode number is constant, we don't need to keep updating
it everytime we refresh the other inode fields.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We were setting the inode flags from GFS2's flags far too often, even when they
couldn't possibly have changed. This patch reduces the amount of flag
setting going on so that we do it only when the inode is read in or
when the flags have changed. The create case is covered by the "when
the inode is read in" case.
This also fixes a bug where we didn't set S_SYNC correctly.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This fixes a race between the glock and the page lock encountered
during truncate in gfs2_readpage and gfs2_prepare_write. The gfs2_readpages
function doesn't need the same fix since it only uses a try lock anyway, so
it will fail back to gfs2_readpage in the case of a potential deadlock.
This bug was spotted by Russell Cattelan.
Cc: Russell Cattelan <cattelan@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
There is no way to set the GL_DUMP flag, and in any case the
same thing can be done with systemtap if required for debugging,
so this removes it.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The meta_header for an ondisk rgrp never changes, so there is no point
copying it in and back out to disk. Also there is no reason to keep
a copy for each rgrp in memory.
The code already checks to ensure that the header is correct before
it calls the routine to copy the data in, so that we don't even need
to check whether its correct on disk in the functions in ondisk.c
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
We don't need to use endian conversions for 0 initialisations
when creating a new on-disk inode.
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This shrinks the size of the gfs2_inode by 8 bytes by
replacing the version counter with a one bit valid/invalid
flag.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is almost never used. Its there for backward
compatibility with GFS1. It doesn't need its own
field since it can always be calculated from the
inode mode & flags. This saves a bit more space
in the gfs2_inode.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Remove the di_[amc]time fields and use inode->i_[amc]time
fields instead. This saves 24 bytes from the gfs2_inode.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Remove the di_nlink field in favour of inode->i_nlink and
update the nlink handling to use the proper macros. This
saves 4 bytes.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Remove duplicate di_uid/di_gid fields in favour of using
inode->i_uid/inode->i_gid instead. This saves 8 bytes.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This removes the duplicate di_mode field in favour of using the
inode->i_mode field. This saves 4 bytes.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This removes the device numbers from this structure by using
inode->i_rdev instead. It also cleans up the code in gfs2_mknod.
It results in shrinking the gfs2_inode by 8 bytes.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The metadata header doesn't need to be stored in the incore
struct gfs2_inode since its constant, and this patch removes it.
Also, there is already a field for the inode's number in the
struct gfs2_inode, so we don't need one in struct gfs2_dinode_host
as well.
This saves 28 bytes of space in the struct gfs2_inode.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Change argument for gfs2_dinode_print in order to prepare
for removal of duplicate fields between struct inode and
struct gfs2_dinode_host.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
gfs2_dinode_in() is only ever called from one place, so move it
to that place (in inode.c) and make it static.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This is a preliminary patch to enable the removal of fields
in gfs2_dinode_host which are duplicated in struct inode.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Everywhere this was called, a struct gfs2_inode was available,
but despite that, it was always called with a struct gfs2_dinode
as an argument. By making this change it paves the way to start
eliminating fields duplicated between the kernel's struct inode
and the struct gfs2_dinode.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Commit "[GFS2] split and annotate gfs2_log_head" resulted in an incorrect
checksum calculation for log headers. This patch corrects the
problem without resorting to copying the whole log header as
the previous code used to.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
... and several could be killed, but that's another story.
Annotate scalar ones, kill completely unused.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Annotated scalar fields, dropped unused ones. Note that
it's not at all obvious that we want to convert all of them
to host-endian...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
The latter is used as part of gfs2-private part of struct inode.
It actually stores a lot of fields differently; for now the
declaration is just cloned, inode field is swtiched and changes
propagated.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
This changes the type of variable "i" in rtl8169_init_one()
from "unsigned int" to "int". "i" is checked for < 0 later,
which can never happen for "unsigned". This results in broken
error handling.
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Move declaration of struct pxa2xx_udc_mach_info from
include/asm-arm/arch-pxa/udc.h to new file
include/asm-arm/mach/udc_pxa2xx.h.
This allow us to use this structure with
multiple platforms - pxa and ixp4xx. USB
device controller used in pxa25x is the same
as controller used in ixp4xx.
Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
