Commit Graph

299583 Commits

Author SHA1 Message Date
Ilia Katsnelson
cc71a7e899 Input: xpad - add signature for Razer Onza Tournament Edition
Signed-off-by: Ilia Katsnelson <k0009000@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-11 00:55:06 -07:00
Yuri Khan
3ffb62cb9a Input: xpad - handle all variations of Mad Catz Beat Pad
The device should be handled by xpad driver instead of generic HID driver.

Signed-off-by: Yuri Khan <yurivkhan@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-11 00:54:49 -07:00
Henrik Rydberg
3dde22a98e Input: bcm5974 - Add support for 2012 MacBook Pro Retina
Add support for the 15'' MacBook Pro Retina model (MacBookPro10,1).

Patch originally written by clipcarl (forums.opensuse.org).

Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-10 09:45:05 -07:00
Ryan Bourgeois
b2e6ad7dfe HID: add support for 2012 MacBook Pro Retina
Add support for the 15'' MacBook Pro Retina. The keyboard is
the same as recent models.

The patch needs to be synchronized with the bcm5974 patch for
the trackpad - as usual.

Patch originally written by clipcarl (forums.opensuse.org).

[rydberg@euromail.se: Amended mouse ignore lines]
Signed-off-by: Ryan Bourgeois <bluedragonx@gmail.com>
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-10 09:44:59 -07:00
Lars-Peter Clausen
9b7e31bbf4 Input: request threaded-only IRQs with IRQF_ONESHOT
Since commit 1c6c69525b ("genirq: Reject bogus threaded irq requests")
threaded IRQs without a primary handler need to be requested with
IRQF_ONESHOT, otherwise the request will fail. This patch adds the
IRQF_ONESHOT to input drivers where it is missing. Not modified by
this patch are those drivers where the requested IRQ will always be a
nested IRQ (e.g. because it's part of an MFD), since for this special
case IRQF_ONESHOT is not required to be specified when requesting the
IRQ.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-07-04 13:12:19 -07:00
Ping Cheng
1cecc5cc06 Input: wacom - don't retrieve touch_max when it is predefined
Some models, such as 0xE6, report more fingers than we process.

Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Tested-by: Nils Kanning <nils@kanning.de>
Tested-by: Rafi Rubin <rafi@seas.upenn.edu>
Reviewed-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-06-28 17:02:45 -07:00
Ping Cheng
61c91dd4a5 Input: wacom - fix retrieving touch_max bug
rep_data is not an array anymore, so taking it's address when passing to
wacom_get_report() is wrong.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Tested-by: Rafi Rubin <rafi@seas.upenn.edu>
Reviewed-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-06-28 17:02:40 -07:00
Randy Dunlap
2177905ca7 Input: fix input.h kernel-doc warning
Fix kernel-doc warning in input.h:

Warning(include/linux/input.h:140): No description found for parameter 'len'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-06-11 23:57:22 -07:00
Dmitry Torokhov
e644dae645 Merge branch 'next' into for-linus 2012-05-24 01:13:01 -07:00
Dmitry Torokhov
86809173ce Input: matrix-keymap - fix building keymaps
Keymaps used by drivers based on matrix-keymap facilities are arrays of
unsigned shorts, not chars. Treating them otherwise produces corrupted
keymaps.

Reported-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-24 01:12:20 -07:00
Viresh Kumar
6123f1192b Input: spear-keyboard - document DT bindings
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-20 22:02:04 -07:00
Viresh Kumar
829c4f9690 Input: spear-keyboard - add device tree bindings
This adds simple DT bindings for spear-keyboard controller.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 22:40:02 -07:00
Dmitry Torokhov
b45c8f35a7 Input: matrix-keymap - wire up device tree support
When platform keymap is not supplied to matrix_keypad_build_keymap()
and device tree support is enabled, try locating specified property
and load keymap from it. If property name is not defined, try using
"linux,keymap".

Based on earlier patch by Viresh Kumar <viresh.kumar@st.com>

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 22:39:43 -07:00
Dmitry Torokhov
1932811f42 Input: matrix-keymap - uninline and prepare for device tree support
Change matrix-keymap helper to be out-of-line, like sparse keymap,
allow the helper perform basic keymap validation and return errors,
and prepare for device tree support.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 22:38:47 -07:00
Jean-François Dagenais
d0a3457d38 Input: adp5588 - add support for gpio names
Signed-off-by: Jean-François Dagenais <jeff.dagenais@gmail.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 22:34:16 -07:00
Poddar, Sourav
f77621cc64 Input: omap-keypad - dynamically handle register offsets
Hi Dmitry,

On Wed, May 9, 2012 at 3:14 PM, Poddar, Sourav <sourav.poddar@ti.com> wrote:
> Hi Dmitry,
>
> I did some minor fixes to the patch which you suggested above and
> the keypad is functional now.
>
> Changes:
> - Move "pm_runtime_enable" before using "pm_runtime_get_sync".
>
> Sending the patch inlined..(also attached).
>
> From: G, Manjunath Kondaiah <manjugk@ti.com>
> Date: Mon, 10 Oct 2011 20:52:05 +0530
> Subject: [PATCH] Input: omap-keypad: dynamically handle register offsets
>
> Keypad controller register offsets are different for omap4
> and omap5. Handle these offsets through static mapping and
> assign these mappings during run time.
>
> Tested on omap4430 sdp with 3.4-rc3.
> Tested on omap5430evm with 3.1-custom kernel.
>
> Cc: Andrew Morton <akpm@linux-foundation.org>
> Signed-off-by: Felipe Balbi <balbi@ti.com>
> Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com>
> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
> ---
>  drivers/input/keyboard/Kconfig        |    4 +-
>  drivers/input/keyboard/omap4-keypad.c |  120 +++++++++++++++++++++++++-------
>  2 files changed, 95 insertions(+), 29 deletions(-)
>
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index f354813..33bbdee 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -512,9 +512,9 @@ config KEYBOARD_OMAP
>          module will be called omap-keypad.
>
>  config KEYBOARD_OMAP4
> -       tristate "TI OMAP4 keypad support"
> +       tristate "TI OMAP4+ keypad support"
>        help
> -         Say Y here if you want to use the OMAP4 keypad.
> +         Say Y here if you want to use the OMAP4+ keypad.
>
>          To compile this driver as a module, choose M here: the
>          module will be called omap4-keypad.
> diff --git a/drivers/input/keyboard/omap4-keypad.c
> b/drivers/input/keyboard/omap4-keypad.c
> index e809ac0..d7102e8 100644
> --- a/drivers/input/keyboard/omap4-keypad.c
> +++ b/drivers/input/keyboard/omap4-keypad.c
> @@ -68,19 +68,52 @@
>
>  #define OMAP4_MASK_IRQSTATUSDISABLE    0xFFFF
>
> +enum {
> +       KBD_REVISION_OMAP4 = 0,
> +       KBD_REVISION_OMAP5,
> +};
> +
>  struct omap4_keypad {
>        struct input_dev *input;
>
>        void __iomem *base;
> -       int irq;
> +       unsigned int irq;
>
>        unsigned int rows;
>        unsigned int cols;
> +       u32 reg_offset;
> +       u32 irqreg_offset;
>        unsigned int row_shift;
>        unsigned char key_state[8];
>        unsigned short keymap[];
>  };
>
> +static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset)
> +{
> +       return __raw_readl(keypad_data->base +
> +                               keypad_data->reg_offset + offset);
> +}
> +
> +static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value)
> +{
> +       __raw_writel(value,
> +                    keypad_data->base + keypad_data->reg_offset + offset);
> +}
> +
> +static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset)
> +{
> +       return __raw_readl(keypad_data->base +
> +                               keypad_data->irqreg_offset + offset);
> +}
> +
> +static void kbd_write_irqreg(struct omap4_keypad *keypad_data,
> +                            u32 offset, u32 value)
> +{
> +       __raw_writel(value,
> +                    keypad_data->base + keypad_data->irqreg_offset + offset);
> +}
> +
> +
>  /* Interrupt handler */
>  static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
>  {
> @@ -91,12 +124,11 @@ static irqreturn_t omap4_keypad_interrupt(int
> irq, void *dev_id)
>        u32 *new_state = (u32 *) key_state;
>
>        /* Disable interrupts */
> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
> -                    keypad_data->base + OMAP4_KBD_IRQENABLE);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
> +                        OMAP4_VAL_IRQDISABLE);
>
> -       *new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0);
> -       *(new_state + 1) = __raw_readl(keypad_data->base
> -                                               + OMAP4_KBD_FULLCODE63_32);
> +       *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0);
> +       *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32);
>
>        for (row = 0; row < keypad_data->rows; row++) {
>                changed = key_state[row] ^ keypad_data->key_state[row];
> @@ -121,12 +153,13 @@ static irqreturn_t omap4_keypad_interrupt(int
> irq, void *dev_id)
>                sizeof(keypad_data->key_state));
>
>        /* clear pending interrupts */
> -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
> +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
>
>        /* enable interrupts */
> -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
> -                       keypad_data->base + OMAP4_KBD_IRQENABLE);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
> +               OMAP4_DEF_IRQENABLE_EVENTEN |
> +                               OMAP4_DEF_IRQENABLE_LONGKEY);
>
>        return IRQ_HANDLED;
>  }
> @@ -139,16 +172,17 @@ static int omap4_keypad_open(struct input_dev *input)
>
>        disable_irq(keypad_data->irq);
>
> -       __raw_writel(OMAP4_VAL_FUNCTIONALCFG,
> -                       keypad_data->base + OMAP4_KBD_CTRL);
> -       __raw_writel(OMAP4_VAL_DEBOUNCINGTIME,
> -                       keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME);
> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
> -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
> -                       keypad_data->base + OMAP4_KBD_IRQENABLE);
> -       __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA,
> -                       keypad_data->base + OMAP4_KBD_WAKEUPENABLE);
> +       kbd_writel(keypad_data, OMAP4_KBD_CTRL,
> +                       OMAP4_VAL_FUNCTIONALCFG);
> +       kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME,
> +                       OMAP4_VAL_DEBOUNCINGTIME);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
> +                       OMAP4_VAL_IRQDISABLE);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
> +                       OMAP4_DEF_IRQENABLE_EVENTEN |
> +                               OMAP4_DEF_IRQENABLE_LONGKEY);
> +       kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE,
> +                       OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA);
>
>        enable_irq(keypad_data->irq);
>
> @@ -162,12 +196,12 @@ static void omap4_keypad_close(struct input_dev *input)
>        disable_irq(keypad_data->irq);
>
>        /* Disable interrupts */
> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
> -                    keypad_data->base + OMAP4_KBD_IRQENABLE);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
> +                        OMAP4_VAL_IRQDISABLE);
>
>        /* clear pending interrupts */
> -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
> +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
>
>        enable_irq(keypad_data->irq);
>
> @@ -182,6 +216,7 @@ static int __devinit omap4_keypad_probe(struct
> platform_device *pdev)
>        struct resource *res;
>        resource_size_t size;
>        unsigned int row_shift, max_keys;
> +       int rev;
>        int irq;
>        int error;
>
> @@ -241,11 +276,40 @@ static int __devinit omap4_keypad_probe(struct
> platform_device *pdev)
>        keypad_data->rows = pdata->rows;
>        keypad_data->cols = pdata->cols;
>
> +       /*
> +       * Enable clocks for the keypad module so that we can read
> +       * revision register.
> +       */
> +       pm_runtime_enable(&pdev->dev);
> +       error = pm_runtime_get_sync(&pdev->dev);
> +       if (error) {
> +               dev_err(&pdev->dev, "pm_runtime_get_sync() failed\n");
> +               goto err_unmap;
> +       }
> +       rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION);
> +       rev &= 0x03 << 30;
> +       rev >>= 30;
> +       switch (rev) {
> +       case KBD_REVISION_OMAP4:
> +               keypad_data->reg_offset = 0x00;
> +               keypad_data->irqreg_offset = 0x00;
> +               break;
> +       case KBD_REVISION_OMAP5:
> +               keypad_data->reg_offset = 0x10;
> +               keypad_data->irqreg_offset = 0x0c;
> +               break;
> +       default:
> +               dev_err(&pdev->dev,
> +                       "Keypad reports unsupported revision %d", rev);
> +               error = -EINVAL;
> +               goto err_pm_put_sync;
> +       }
> +
>        /* input device allocation */
>        keypad_data->input = input_dev = input_allocate_device();
>        if (!input_dev) {
>                error = -ENOMEM;
> -               goto err_unmap;
> +               goto err_pm_put_sync;
>        }
>
>        input_dev->name = pdev->name;
> @@ -273,14 +337,14 @@ static int __devinit omap4_keypad_probe(struct
> platform_device *pdev)
>                        input_dev->keycode, input_dev->keybit);
>
>        error = request_irq(keypad_data->irq, omap4_keypad_interrupt,
> -                            IRQF_TRIGGER_RISING,
> +                           IRQF_DISABLED | IRQF_TRIGGER_RISING,
Sorry, " IRQF_DISABLED" got included by mistake.
Removing this stray change and sending it again.

>                             "omap4-keypad", keypad_data);
>        if (error) {
>                dev_err(&pdev->dev, "failed to register interrupt\n");
>                goto err_free_input;
>        }
>
> -       pm_runtime_enable(&pdev->dev);
> +       pm_runtime_put_sync(&pdev->dev);
>
>        error = input_register_device(keypad_data->input);
>        if (error < 0) {
> @@ -296,6 +360,8 @@ err_pm_disable:
>        free_irq(keypad_data->irq, keypad_data);
>  err_free_input:
>        input_free_device(input_dev);
> +err_pm_put_sync:
> +       pm_runtime_put_sync(&pdev->dev);
>  err_unmap:
>        iounmap(keypad_data->base);
>  err_release_mem:
>
>
> ~Sourav
>
> On Wed, May 9, 2012 at 1:15 PM, Dmitry Torokhov
> <dmitry.torokhov@gmail.com> wrote:
>>> Hi Dmitry ,
>>>
>>>
>>> On Wed, May 9, 2012 at 10:48 AM, Dmitry Torokhov
>>> <dmitry.torokhov@gmail.com> wrote:
>>> > Ho Sourav,
>>> >
>>> > On Thu, Apr 26, 2012 at 11:24:37AM +0530, Sourav Poddar wrote:
>>> >>
>>> >> -config KEYBOARD_OMAP4
>>> >> -     tristate "TI OMAP4 keypad support"
>>> >> +config KEYBOARD_OMAP4+
>>> >
>>> > I think this works purely by accident - '+' sign getting dropped by
>>> > parser...
>>> >
>>> >> @@ -139,16 +192,33 @@ static int omap4_keypad_open(struct input_dev *input)
>>> >>
>>> >>       disable_irq(keypad_data->irq);
>>> >>
>>> >> -     __raw_writel(OMAP4_VAL_FUNCTIONALCFG,
>>> >> -                     keypad_data->base + OMAP4_KBD_CTRL);
>>> >> -     __raw_writel(OMAP4_VAL_DEBOUNCINGTIME,
>>> >> -                     keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME);
>>> >> -     __raw_writel(OMAP4_VAL_IRQDISABLE,
>>> >> -                     keypad_data->base + OMAP4_KBD_IRQSTATUS);
>>> >> -     __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
>>> >> -                     keypad_data->base + OMAP4_KBD_IRQENABLE);
>>> >> -     __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA,
>>> >> -                     keypad_data->base + OMAP4_KBD_WAKEUPENABLE);
>>> >> +     keypad_data->revision = kbd_read_revision(keypad_data,
>>> >> +                     OMAP4_KBD_REVISION);
>>> >> +     switch (keypad_data->revision) {
>>> >> +     case 1:
>>> >> +             keypad_data->irqstatus = OMAP4_KBD_IRQSTATUS + 0x0c;
>>> >> +             keypad_data->irqenable = OMAP4_KBD_IRQENABLE + 0x0c;
>>> >> +             keypad_data->reg_offset = 0x10;
>>> >> +             break;
>>> >
>>> > This should be done in probe().
>>> >
>>> Dont we then require "pm_runtime_put_sync" in probe, since we are trying
>>> to read the keypad revision register.?
>>
>> Ah, indeed, but I think not pm_runtime_get_sync() but
>> pm_runtime_set_active().
>>
>> Not sure if this will fix the crash...
>>
>> --
>> Dmitry
>>
>>
>> Input: omap-keypad - dynamically handle register offsets
>>
>> From: G, Manjunath Kondaiah <manjugk@ti.com>
>>
>> Keypad controller register offsets are different for omap4
>> and omap5. Handle these offsets through static mapping and
>> assign these mappings during run time.
>>
>> Tested on omap4430 sdp with 3.4-rc3.
>> Tested on omap5430evm with 3.1-custom kernel.
>>
>> Signed-off-by: Felipe Balbi <balbi@ti.com>
>> Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com>
>> Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
>> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
>> ---
>>
>>  drivers/input/keyboard/Kconfig        |    4 +
>>  drivers/input/keyboard/omap4-keypad.c |  117 ++++++++++++++++++++++++++-------
>>  2 files changed, 94 insertions(+), 27 deletions(-)
>>
>>
>> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
>> index 20a3753..84ee155 100644
>> --- a/drivers/input/keyboard/Kconfig
>> +++ b/drivers/input/keyboard/Kconfig
>> @@ -531,9 +531,9 @@ config KEYBOARD_OMAP
>>          module will be called omap-keypad.
>>
>>  config KEYBOARD_OMAP4
>> -       tristate "TI OMAP4 keypad support"
>> +       tristate "TI OMAP4+ keypad support"
>>        help
>> -         Say Y here if you want to use the OMAP4 keypad.
>> +         Say Y here if you want to use the OMAP4+ keypad.
>>
>>          To compile this driver as a module, choose M here: the
>>          module will be called omap4-keypad.
>> diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c
>> index e809ac0..c9fd0df 100644
>> --- a/drivers/input/keyboard/omap4-keypad.c
>> +++ b/drivers/input/keyboard/omap4-keypad.c
>> @@ -68,19 +68,52 @@
>>
>>  #define OMAP4_MASK_IRQSTATUSDISABLE    0xFFFF
>>
>> +enum {
>> +       KBD_REVISION_OMAP4 = 0,
>> +       KBD_REVISION_OMAP5,
>> +};
>> +
>>  struct omap4_keypad {
>>        struct input_dev *input;
>>
>>        void __iomem *base;
>> -       int irq;
>> +       unsigned int irq;
>>
>>        unsigned int rows;
>>        unsigned int cols;
>> +       u32 reg_offset;
>> +       u32 irqreg_offset;
>>        unsigned int row_shift;
>>        unsigned char key_state[8];
>>        unsigned short keymap[];
>>  };
>>
>> +static int kbd_readl(struct omap4_keypad *keypad_data, u32 offset)
>> +{
>> +       return __raw_readl(keypad_data->base +
>> +                               keypad_data->reg_offset + offset);
>> +}
>> +
>> +static void kbd_writel(struct omap4_keypad *keypad_data, u32 offset, u32 value)
>> +{
>> +       __raw_writel(value,
>> +                    keypad_data->base + keypad_data->reg_offset + offset);
>> +}
>> +
>> +static int kbd_read_irqreg(struct omap4_keypad *keypad_data, u32 offset)
>> +{
>> +       return __raw_readl(keypad_data->base +
>> +                               keypad_data->irqreg_offset + offset);
>> +}
>> +
>> +static void kbd_write_irqreg(struct omap4_keypad *keypad_data,
>> +                            u32 offset, u32 value)
>> +{
>> +       __raw_writel(value,
>> +                    keypad_data->base + keypad_data->irqreg_offset + offset);
>> +}
>> +
>> +
>>  /* Interrupt handler */
>>  static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
>>  {
>> @@ -91,12 +124,11 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
>>        u32 *new_state = (u32 *) key_state;
>>
>>        /* Disable interrupts */
>> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
>> -                    keypad_data->base + OMAP4_KBD_IRQENABLE);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
>> +                        OMAP4_VAL_IRQDISABLE);
>>
>> -       *new_state = __raw_readl(keypad_data->base + OMAP4_KBD_FULLCODE31_0);
>> -       *(new_state + 1) = __raw_readl(keypad_data->base
>> -                                               + OMAP4_KBD_FULLCODE63_32);
>> +       *new_state = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE31_0);
>> +       *(new_state + 1) = kbd_readl(keypad_data, OMAP4_KBD_FULLCODE63_32);
>>
>>        for (row = 0; row < keypad_data->rows; row++) {
>>                changed = key_state[row] ^ keypad_data->key_state[row];
>> @@ -121,12 +153,13 @@ static irqreturn_t omap4_keypad_interrupt(int irq, void *dev_id)
>>                sizeof(keypad_data->key_state));
>>
>>        /* clear pending interrupts */
>> -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
>> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
>> +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
>>
>>        /* enable interrupts */
>> -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
>> -                       keypad_data->base + OMAP4_KBD_IRQENABLE);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
>> +               OMAP4_DEF_IRQENABLE_EVENTEN |
>> +                               OMAP4_DEF_IRQENABLE_LONGKEY);
>>
>>        return IRQ_HANDLED;
>>  }
>> @@ -139,16 +172,17 @@ static int omap4_keypad_open(struct input_dev *input)
>>
>>        disable_irq(keypad_data->irq);
>>
>> -       __raw_writel(OMAP4_VAL_FUNCTIONALCFG,
>> -                       keypad_data->base + OMAP4_KBD_CTRL);
>> -       __raw_writel(OMAP4_VAL_DEBOUNCINGTIME,
>> -                       keypad_data->base + OMAP4_KBD_DEBOUNCINGTIME);
>> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
>> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
>> -       __raw_writel(OMAP4_DEF_IRQENABLE_EVENTEN | OMAP4_DEF_IRQENABLE_LONGKEY,
>> -                       keypad_data->base + OMAP4_KBD_IRQENABLE);
>> -       __raw_writel(OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA,
>> -                       keypad_data->base + OMAP4_KBD_WAKEUPENABLE);
>> +       kbd_writel(keypad_data, OMAP4_KBD_CTRL,
>> +                       OMAP4_VAL_FUNCTIONALCFG);
>> +       kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME,
>> +                       OMAP4_VAL_DEBOUNCINGTIME);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
>> +                       OMAP4_VAL_IRQDISABLE);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
>> +                       OMAP4_DEF_IRQENABLE_EVENTEN |
>> +                               OMAP4_DEF_IRQENABLE_LONGKEY);
>> +       kbd_writel(keypad_data, OMAP4_KBD_WAKEUPENABLE,
>> +                       OMAP4_DEF_WUP_EVENT_ENA | OMAP4_DEF_WUP_LONG_KEY_ENA);
>>
>>        enable_irq(keypad_data->irq);
>>
>> @@ -162,12 +196,12 @@ static void omap4_keypad_close(struct input_dev *input)
>>        disable_irq(keypad_data->irq);
>>
>>        /* Disable interrupts */
>> -       __raw_writel(OMAP4_VAL_IRQDISABLE,
>> -                    keypad_data->base + OMAP4_KBD_IRQENABLE);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQENABLE,
>> +                        OMAP4_VAL_IRQDISABLE);
>>
>>        /* clear pending interrupts */
>> -       __raw_writel(__raw_readl(keypad_data->base + OMAP4_KBD_IRQSTATUS),
>> -                       keypad_data->base + OMAP4_KBD_IRQSTATUS);
>> +       kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS,
>> +                        kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));
>>
>>        enable_irq(keypad_data->irq);
>>
>> @@ -182,6 +216,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
>>        struct resource *res;
>>        resource_size_t size;
>>        unsigned int row_shift, max_keys;
>> +       int rev;
>>        int irq;
>>        int error;
>>
>> @@ -241,11 +276,40 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
>>        keypad_data->rows = pdata->rows;
>>        keypad_data->cols = pdata->cols;
>>
>> +       /*
>> +        * Mark device as active (and wake up its parent) so we can read
>> +        * revision register.
>> +        */
>> +       error = pm_runtime_set_active(&pdev->dev);
>> +       if (error) {
>> +               dev_err(&pdev->dev, "pm_runtime_set_active() failed\n");
>> +               goto err_unmap;
>> +       }
>> +
>> +       rev = __raw_readl(keypad_data->base + OMAP4_KBD_REVISION);
>> +       rev &= 0x03 << 30;
>> +       rev >>= 30;
>> +       switch (rev) {
>> +       case KBD_REVISION_OMAP4:
>> +               keypad_data->reg_offset = 0x00;
>> +               keypad_data->irqreg_offset = 0x00;
>> +               break;
>> +       case KBD_REVISION_OMAP5:
>> +               keypad_data->reg_offset = 0x10;
>> +               keypad_data->irqreg_offset = 0x0c;
>> +               break;
>> +       default:
>> +               dev_err(&pdev->dev,
>> +                       "Keypad reports unsupported revision %d", rev);
>> +               error = -EINVAL;
>> +               goto err_pm_suspended;
>> +       }
>> +
>>        /* input device allocation */
>>        keypad_data->input = input_dev = input_allocate_device();
>>        if (!input_dev) {
>>                error = -ENOMEM;
>> -               goto err_unmap;
>> +               goto err_pm_suspended;
>>        }
>>
>>        input_dev->name = pdev->name;
>> @@ -281,6 +345,7 @@ static int __devinit omap4_keypad_probe(struct platform_device *pdev)
>>        }
>>
>>        pm_runtime_enable(&pdev->dev);
>> +       pm_runtime_put_sync(&pdev->dev);
>>
>>        error = input_register_device(keypad_data->input);
>>        if (error < 0) {
>> @@ -296,6 +361,8 @@ err_pm_disable:
>>        free_irq(keypad_data->irq, keypad_data);
>>  err_free_input:
>>        input_free_device(input_dev);
>> +err_pm_suspended:
>> +       pm_runtime_set_suspended(&pdev->dev);
>>  err_unmap:
>>        iounmap(keypad_data->base);
>>  err_release_mem:

From: G, Manjunath Kondaiah <manjugk@ti.com>
Date: Mon, 10 Oct 2011 20:52:05 +0530
Subject: [PATCH] Input: omap-keypad: dynamically handle register offsets

Keypad controller register offsets are different for omap4
and omap5. Handle these offsets through static mapping and
assign these mappings during run time.

Tested on omap4430 sdp with 3.4-rc3.
Tested on omap5430evm with 3.1-custom kernel.

Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com>
Signed-off-by: Sourav Poddar <sourav.poddar@ti.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 22:33:58 -07:00
JJ Ding
1a49a0a04d Input: synaptics - fix compile warning
Move synaptics_invert_y() inside CONFIG_MOUSE_PS2_SYNAPTICS to get rid of
a compile warning when we don't select synaptics support.

drivers/input/mouse/synaptics.c:53:12: warning: ‘synaptics_invert_y’ defined but not used [-Wunused-function]

Signed-off-by: JJ Ding <dgdunix@gmail.com>
Reviewed-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 22:33:49 -07:00
Dmitry Torokhov
f4eea7e213 MAINTAINERS: adjust input-related patterns
Add pattens for input-related headers to MAINTAINERS file.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 22:33:17 -07:00
Dmitry Torokhov
616575c2d2 Input: ALPS - switch to using input_mt_report_finger_count
Instead of open-coded reporting number of fingers on the touchpad
let's use input_mt_report_finger_count() helper.

Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 22:32:33 -07:00
George Pantalos
3b7e09fad9 Input: ALPS - add semi-MT support for v4 protocol
This patch adds semi-MT support for ALPS v4 protocol touchpads.
It is based on the work by Seth Forshee for ALPS v3 and v4 protocol
support. Three packets are required to assemble and process the MT
data. ST events are reported at once to avoid latency. If there
were two contacts or more, report MT data instead of ST events.

Thanks to Seth Forshee for providing most of the code, guidance
and insight for producing this patch.

Signed-off-by: George Pantalos <gpantalos@gmail.com>
Acked-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 22:32:20 -07:00
Paul Parsons
ae99ea562b Input: Add Synaptics NavPoint (PXA27x SSP/SPI) driver
This driver adds support for the Synaptics NavPoint touchpad connected
to a PXA27x SSP port in SPI slave mode. The device emulates a mouse;
a tap or tap-and-a-half drag gesture emulates the left mouse button.
For example, use the xf86-input-evdev driver for an X pointing device.

Signed-off-by: Paul Parsons <lost.distance@yahoo.com>
Tested-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 22:12:39 -07:00
Daniel Kurtz
6ee3dbf93a Input: atmel_mxt_ts - dump each message on just 1 line
Helps ensure all bytes for a single message together in the system log.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 20:39:06 -07:00
Daniel Kurtz
822115ff4b Input: atmel_mxt_ts - do not read extra (checksum) byte
atmel_mxt devices will send a checksum byte at the end of a message if
the MSB of the object address is set.
However, since this driver does not set this bit, the checksum byte
isn't actually sent, so don't even try to read it.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 20:39:06 -07:00
Daniel Kurtz
d1ff320f0a Input: atmel_mxt_ts - verify object size in mxt_write_object
Don't allow writing past the length of an object.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 20:39:05 -07:00
Daniel Kurtz
71b3e938cb Input: atmel_mxt_ts - only allow root to update firmware
Restrict permissions on the update_fw sysfs entry to read only for root
only.

Also, update object permission to use a macro S_IRUGO macro instead of
hard coded 0444.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Nick Dyer <nick.dyer@itdev.co.uk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 20:39:05 -07:00
Daniel Kurtz
3a73c8169e Input: atmel_mxt_ts - use CONFIG_PM_SLEEP
Simple cleanup to use newer PM APIs.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 20:39:04 -07:00
Tai-hwa Liang
d3132c5c95 Input: sentelic - report device's production serial number
Hardware since Cx supports an unique identity (used to identify OEM vendors
and released lot number) which is very helpful for diagnostic purpose.
This revision tries to make it as a part of driver boot up message.

Whilst here, also bumping fsp_drv_ver to acknowledge recent addition of
absolute coordinates output.

Signed-off-by: Tai-hwa Liang <avatar@sentelic.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 20:39:04 -07:00
Peter Ujfalusi
9ac7b1a36c Input: tl6040-vibra - Device Tree support
Enable DT based probing of the vibra driver.

Example of dts section to load the twl6040-vibra driver:
twl6040: twl6040@4b {
	...
	twl6040_vibra: twl6040@1 {
		compatible = "ti,twl6040-vibra";
		interrupts = <4>;
		vddvibl-supply = <&vbat>;
		vddvibr-supply = <&vbat>;
		vibldrv_res = <8>;
		vibrdrv_res = <3>;
		viblmotor_res = <10>;
		vibrmotor_res = <10>;
	};
};

[Sasha Levin <levinsasha928@gmail.com>: fixed build error]
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-10 20:37:46 -07:00
Dmitry Torokhov
2872a9b521 Input: evdev - properly handle read/write with count 0
According to the standard count 0 is special - no IO should happen but we
can check error conditions (device gone away, etc), and return 0 if there
are no errors. We used to return -EINVAL instead and we also could return 0
if an event was "stolen" by another thread.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02 00:23:58 -07:00
Dmitry Torokhov
dba4258068 Input: evdev - properly access RCU-protected 'grab' data
We should use rcu_dereference_protected() when checking if given client
is the one that grabbed the device. This fixes warnings produced by
sparse.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02 00:23:14 -07:00
Stephen Warren
f31ad40669 Input: mpu3050 - set IRQF_ONESHOT when requesting the interrupt
Commit 1c6c695 "genirq: Reject bogus threaded irq requests" requires
that request_threaded_irq() either be passed an explicit handler, or
that IRQF_ONESHOT be set. Set this flag.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02 00:22:45 -07:00
Dmitry Torokhov
46f49b7a22 Input: serio_raw - signal EFAULT even if read/write partially succeeds
When copy_to/from_user fails in the middle of transfer we should not
report to the user that read/write partially succeeded but rather
report -EFAULT right away, so that application will know that it got
its buffers all wrong.

If application messed up its buffers we can't trust the data fetched
from userspace and successfully written to the device or if data read
from the device and transferred to userspace ended up where application
expected it to end.

If serio_write() fails we still going to report partial writes if failure
happens in the middle of the transfer.

This is basically a revert of 7a0a27d2ce
and 4fa0771138.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02 00:21:13 -07:00
Dmitry Torokhov
eb71d1bb27 Input: wacom - use dev_xxx() instead of naked printk()s and dbg()s
Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02 00:20:51 -07:00
Dmitry Torokhov
a882c932a6 Input: wacom - return proper error if usb_get_extra_descriptor() fails
Instead of returning 1 (which is not even negative) let's capture and return
error codde returned by usb_get_extra_descriptor().

Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02 00:20:30 -07:00
Dmitry Torokhov
0c9e300ade Input: wacom - fix sparse warning
This fixes the following warning from sparse

	warning: Using plain integer as NULL pointer

Reviewed-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-05-02 00:19:52 -07:00
Ashish Jangam
eead75a2b4 Input: add support for DA9052/53 touch screen controller
This driver adds support for DA9052/53 4-wire resistive ADC interfaced
touchscreen controller. DA9052/53 is a multi-function device, therefore
this driver depends on DA9052/53 core.

This patch is functionally tested on Samsung SMDKV6410.

Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-29 23:37:15 -07:00
Shawn Landden
df052676e5 Input: usbtouchscreen - only expose e2i configure option in expert mode
as is the case of all other devices supported by usbtouchscreen.c

Also list e2i under the composite configure option (TOUCHSCREEN_USB_COMPOSITE)

Signed-off-by: Shawn Landden <shawnlandden@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-29 22:53:56 -07:00
Shawn Landden
41baf6368e Input: usbtouchscreen - fix typo
Signed-off-by: Shawn Landden <shawnlandden@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-29 22:53:52 -07:00
Ping Cheng
1963518b9b Input: wacom - add 0xE5 (MT device) support
Main part of patch is adding support for a new Wacom MT touch
packet and labels these devices using MTSCREEN type.

Other items of interest:

Delete some duplicate code in HID parsing for Y info since
its already done in X path.

In wacom_query_tablet_data(), only invoke the set report
that requests tablets to send Wacom Touch packets for
Finger interfaces.  Mostly, this is to make code intent clear.

Tested-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-29 21:13:53 -07:00
Ping Cheng
f393ee2b81 Input: wacom - retrieve maximum number of touch points
From the HID usage table when it is supported.

Tested-by: Jason Gerecke <killertofu@gmail.com>
Signed-off-by: Chris Bagwell <chris@cnpbagwell.com>
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-29 21:13:46 -07:00
Julia Lawall
482d74ceb0 Input: aiptek - adjust error-handling code label
At the point of this error-handling code, aiptek->urb has been allocated,
and it does not appear to be less necessary to free it here than in the
error-handling code just below.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-23 23:36:05 -07:00
Roland Stigge
34604086be Input: lpc32xx_ts - fix device tree compatible string
During the device tree integration of the various LPC32xx drivers,
we agreed on using non-wildcard "compatible" strings. This change
switches lpc32xx_ts touchscreen driver to use "nxp,lpc3220-tsc".

Signed-off-by: Roland Stigge <stigge@antcom.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-23 23:35:59 -07:00
Jesper Juhl
f57fe78ee4 Input: atkbd - fix language in a printed message
I believe that "trying to access hardware" is more correct English
than "trying access hardware".

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-23 23:35:53 -07:00
Axel Lin
5d066474cd Input: use module_pci_driver
This patch converts the drivers in drivers/input/* to use module_pci_driver()
macro which makes the code smaller and a bit simpler.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-04-21 23:48:58 -07:00
Dmitry Torokhov
57b8628bb0 Merge commit 'v3.4-rc4' into next 2012-04-21 23:28:35 -07:00
Linus Torvalds
66f75a5d02 Linux 3.4-rc4 2012-04-21 14:47:52 -07:00
Yong Zhang
e9a5ea1852 sparc32,leon: add notify_cpu_starting()
Otherwise cpu_active_mask will not set, which lead to other issue.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Konrad Eisele <konrad@gaisler.com>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-21 16:35:06 -04:00
Linus Torvalds
8f4f9d4d3c ARM: SoC fixes for 3.4-rc
- at91, ux500, imx, omap and bcmring:
   - at91 fixes for =m driver build issues, irqdomain fixes and config
     dependency fixes
   - ux500 kconfig dependency fixes and a  smp wakeup bugfix
   - imx idle bugfix and build fix due to irq domain changes
   - omap uart pinmux fixes, softreset regression revert and misc fixes
   - bcmring build error regression fix
 
 - ux500 and imx had some small defconfig updates in this branch
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPksdXAAoJEIwa5zzehBx3iqIP/ibJhM5QYWCXCoudOHouvXW7
 FALYsWTJodKf3qN0SQtty3RdmEKjdvCHGPcwtSEtjIc5xngCtYPEd5JWNl1u94nb
 f0+rhELfHljG+5XSyqnZfPmAN74ApvULl52hGXVudLjEwCB4uoYV5BN4c0dyr3Of
 Wm1+9HUyUo/WwXbE9UxxJkLDVsB+eAm2iOeAcerxCqsgKUzUqGP3fgp2eVJ7Q8LT
 f9tiSzaLeQnbYVymNeAiCzk3L9lKFx5r3QoxH2QOW6ieNUqAZC11X3L9anj30joG
 Ns1dMf5jGbWoSbHGMbff+PWj1sRxOzuoksjZ/jEZ2eXgNF4maoFrPqFZe6+o4K36
 pekjYwKfeuKdT9JXPSwJe3yQULxfWMTwvg2ZF86R9KOIcRGI2gwGDDTYZ4LOr8mp
 vQbOMWRGDNFxzWPZA9BfMDnG5AQxuoBlprnZQht2HqLar0dbHTx0qsqoxttOwenG
 GwnLG0ZiwsCkrXcAJ/PSSlHfmhEE37H8NsCzBXMeF1kpWwDJZROjEOdDQREuwtYB
 qcQ7GfQ9u8ysemMbXyrAM+SySsc9r8HXw/J2NMIlEBSdPba6CIgIQigUMYnWgFt8
 oJAPuTsT4/VIJbqCLkEOai3m5oaGllZ0zd5+SxzSbmmhybtFUrttjMP4WCUTqtuX
 lEKPTuNko5mb+2q6MEW0
 =mzPZ
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull "ARM: SoC fixes" from Olof Johansson:
 * at91, ux500, imx, omap and bcmring:
  - at91 fixes for =m driver build issues, irqdomain fixes and config
    dependency fixes
  - ux500 kconfig dependency fixes and a  smp wakeup bugfix
  - imx idle bugfix and build fix due to irq domain changes
  - omap uart pinmux fixes, softreset regression revert and misc fixes
  - bcmring build error regression fix

 * ux500 and imx had some small defconfig updates in this branch

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
  ARM: bcmring: fix UART declarations
  ARM: imx: Fix imx5 idle logic bug
  ARM: imx27-dt: Fix build due to removal of irq_domain_add_simple()
  ARM: imx_v4_v5_defconfig: Add support for CONFIG_REGULATOR_FIXED_VOLTAGE
  ARM: OMAP1: DMTIMER: fix broken timer clock source selection
  ARM: OMAP: serial: Fix the ocp smart idlemode handling bug
  ARM: OMAP2+: UART: Fix incorrect population of default uart pads
  ARM: OMAP: sram: fix BUG in dpll code for !PM case
  dmaengine: Kconfig: fix Atmel at_hdmac entry
  USB: gadget/at91_udc: add gpio_to_irq() function to vbus interrupt
  USB: ohci-at91: change annotations for probe/remove functions
  leds-atmel-pwm.c: Make pwmled_probe() __devinit
  ARM: at91: fix at91sam9261ek Ethernet dm9000 irq
  ARM: at91: fix rm9200ek flash size
  ARM: at91: remove empty at91_init_serial function
  ARM: at91: fix typo in at91_pmc_base assembly declaration
  ARM: at91: Export at91_matrix_base
  ARM: at91: Export at91_pmc_base
  ARM: at91: Export at91_ramc_base
  ARM: at91: Export at91_st_base
  ...
2012-04-21 12:45:52 -07:00
Linus Torvalds
126a3483d6 MMC fixes for 3.4-rc4:
The major fixes here are:
   * Build fix for omap_hsmmc with OF against 3.4-rc1.
   * Fix CONFIG_MMC_UNSAFE_RESUME semantics regression against 3.3,
     which broke hotplug card detection when UNSAFE_RESUME is set.
   * Fix a race condition in omap_hsmmc with runtime PM.
   * Fix two libertas SDIO-powered-resume regressions.
  Also small fixes for discard/sanitize, dw_mmc, cd-gpio and esdhc-imx.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJPkh1jAAoJEHNBYZ7TNxYMe0EQAIpvPan5J3eT9rQU2R0Fsgbd
 hd10NVOPQAQaBDc59r/jmTj5iqDQQ1PGkrHti94IECCPWr3dbeTamhmUfYt6+XXZ
 Ae9dlYQ8llKa6ZLSVPmNsMLmFnsqDek3LIsxk/viJIKqSGee/yOHeM6W7v6d2T+z
 GCLFtV3xADU4F9PrZxdfWOJ3kDsV9WCTYnn5/WR78maSURo8iAfck5u+isitO0rn
 NaXfgO29WIHlYmRHRpXMGk2pCmv8cMX8i89mBExeIWdfn40yGCZRi+kUb0VquR1W
 7lqdeKEF0NY1EU9ejuPZK2VepvxEhC1ibOlPkGfgHBd52YLrDaSl3WcqKdzKILIm
 wYKEls8AU5ZnWiuRpJq7QpPemTsbFQpI72O6OgntYhwiKE2TkJ0BY3KtjvFpVCxi
 s+zqZsQwIt6rjJZyQzg1Y5yGA42JF75rkzWnRtRfWcSma83MFiZawAVAV/qGZsrn
 EddUdOodvvO3owC9dD4wI0Q2eCRSZog3sVO9uSQg8zVHvfRGD61GBvqguyR8mbiH
 +CUAMMD9mpKiApu3gvHbjn3OjZuKQ9AGDz0SYj+PbQEwsEBF+qXs5BeytBC8S1Yh
 cNNdpvzjZl7EM/lJWywZ1XQ741Tg1Qgdgtx8njsoilfE51UTlR9TUd04V0bg0Fk2
 fS3P+BRKf+4WR+iGyXJ1
 =Zl8K
 -----END PGP SIGNATURE-----

Merge tag 'mmc-fixes-for-3.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC fixes from Chris Ball:
 - Build fix for omap_hsmmc with OF against 3.4-rc1.
 - Fix CONFIG_MMC_UNSAFE_RESUME semantics regression against 3.3, which
   broke hotplug card detection when UNSAFE_RESUME is set.
 - Fix a race condition in omap_hsmmc with runtime PM.
 - Fix two libertas SDIO-powered-resume regressions.
 - Small fixes for discard/sanitize, dw_mmc, cd-gpio and esdhc-imx.

* tag 'mmc-fixes-for-3.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: core: Do not pre-claim host in suspend
  mmc: dw_mmc: prevent NULL dereference for dma_ops
  mmc: unbreak sdhci-esdhc-imx on i.MX25
  mmc: cd-gpio: Include header to pickup exported symbol prototypes
  mmc: sdhci: refine non-removable card checking for card detection
  mmc: dw_mmc: Fix switch from DMA to PIO
  mmc: remove MMC bus legacy suspend/resume method
  mmc: omap_hsmmc: Get rid of of_have_populated_dt() usage
  mmc: omap_hsmmc: build fix for CONFIG_OF=y and CONFIG_MMC_OMAP_HS=m
  mmc: fixes for eMMC v4.5 sanitize operation
  mmc: fixes for eMMC v4.5 discard operation
2012-04-21 12:44:37 -07:00
Linus Torvalds
8898159650 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
 - Fixes a regression at DVB core when switching from DVB-S2 to DVB-S on
   Kaffeine (Fedora 16 Bugzilla #812895);
 - Fixes a mutex unlock at an error condition at drx-k;
 - Fix winbond-cir set mode;
 - mt9m032: Fix a compilation breakage with some random Kconfig;
 - mt9m032: fix two dead locks;
 - xc5000: don't require an special firmware (that won't be provided by
   the vendor) just because the xtal frequency is different;
 - V4L DocBook: fix some typos at multi-plane formats description.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] xc5000: support 32MHz & 31.875MHz xtal using the 41.024.5 firmware
  [media] V4L: mt9m032: fix compilation breakage
  [media] V4L: DocBook: Fix typos in the multi-plane formats description
  [media] V4L: mt9m032: fix two dead-locks
  [media] rc-core: set mode for winbond-cir
  [media] drxk: Does not unlock mutex if sanity check failed in scu_command()
  [media] dvb_frontend: Fix a regression when switching back to DVB-S
2012-04-21 12:43:23 -07:00