AcoSail/kernel_optimize_test
8
0
Fork 0
forked from luck/tmp_suning_uos_patched
Code Pull Requests Activity
da8065ac3e
kernel_optimize_test/arch/arm/mach-pxa
History
Eric Miao da8065ac3e [ARM] locomo: avoid unnecessary cascaded keyboard IRQ 
It is not necessary and is over-complicated for IRQ_LOCOMO_KEY to
be a cascaded IRQ of IRQ_LOCOMO_KEY_BASE. Removed and introduced
locomokbd_{open,close} for masking/unmasking of the keyboard IRQ.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:49 +08:00
..
include/mach [ARM] locomo: avoid unnecessary cascaded keyboard IRQ 2010-03-02 07:40:49 +08:00
am200epd.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
am300epd.c [ARM] 5354/1: mach-pxa: add AM300 platform driver v3 2009-02-10 11:28:00 +00:00
balloon3.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
clock.c [ARM] 5536/1: Move clk_add_alias() to arch/arm/common/clkdev.c 2009-06-04 17:45:43 +01:00
clock.h [ARM] pxa: remove left-over struct clk *other field from struct clk 2009-09-10 18:49:23 +08:00
cm-x2xx-pci.c [ARM] pxa: use chip->ack() instead of accessing GEDR directly 2010-03-02 07:40:45 +08:00
cm-x2xx-pci.h
cm-x2xx.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
cm-x255.c [ARM] pxa: simplify the LCD pin configuration for pxa25x platforms 2010-03-02 07:40:46 +08:00
cm-x270.c [ARM] pxa/cm-x270: avoid direct access of GPIO/MFP registers 2010-03-02 07:40:48 +08:00
cm-x300.c [ARM] pxa/cm-x300: add PWM backlight support 2009-12-16 16:49:22 +08:00
colibri-pxa3xx.c pxa3xx_nand: move pxa3xx_nand.h common into plat directory 2009-12-01 09:02:43 +08:00
colibri-pxa270.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
colibri-pxa300.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
colibri-pxa320.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
corgi_lcd.c [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
corgi_pm.c [ARM] pxa/zaurus: rename spitz_battery_levels_* to sharpsl_* 2009-12-01 09:03:01 +08:00
corgi_ssp.c [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
corgi.c [ARM] pxa/corgi: fix incorrect default GPIO for UDC Vbus 2010-01-13 21:01:08 +08:00
cpufreq-pxa2xx.c [ARM] pxa/cpufreq: fix index assignments for end marker 2009-11-20 14:23:13 -06:00
cpufreq-pxa3xx.c [ARM] pxa/cpufreq: fix index assignments for end marker 2009-11-20 14:23:13 -06:00
csb701.c [ARM] pxa/csb701: do not register devices on non-csb726 boads 2009-04-04 10:26:35 +08:00
csb726.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
devices.c [ARM] pxa: fix no reference of cpu_is_pxa25x() in devices.c 2009-12-16 21:35:52 +08:00
devices.h [ARM] pxa: add device definition for graphics controller 2009-09-10 18:49:27 +08:00
e330.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
e350.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
e400.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
e740.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
e750.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
e800.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
em-x270.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
eseries.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
eseries.h [ARM] pxa: Add multi-io support for e-series 2008-12-15 03:29:34 +00:00
ezx.c [ARM] pxa/ezx: add leds-lp3944 support for A910 EZX phone 2009-12-01 09:03:03 +08:00
generic.c [ARM] pxa: move GPIO register definitions into <mach/gpio.h> 2009-03-09 21:22:37 +08:00
generic.h [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
gumstix.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
h5000.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
himalaya.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
hx4700.c [ARM] pxa/hx4700: actually use platform_lcd driver 2009-12-01 09:03:15 +08:00
idp.c [ARM] pxa: simplify the LCD pin configuration for pxa25x platforms 2010-03-02 07:40:46 +08:00
imote2.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
irq.c [ARM] pxa: fix irq suspend/resume for pxa25x 2010-01-13 21:01:09 +08:00
Kconfig Merge branch 'for-rmk/samsung3' of git://git.fluff.org/bjdooks/linux into devel-stable 2010-01-27 22:11:32 +00:00
leds-idp.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
leds-lubbock.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
leds-mainstone.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
leds.c
leds.h
littleton.c [ARM] pxa/littleton: add UART3 GPIO config 2009-12-29 14:11:28 +08:00
lpd270.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
lubbock.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
magician.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
mainstone.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
Makefile [ARM] pxa/raumfeld: add platform support 2009-12-18 15:34:38 +08:00
Makefile.boot
mfp-pxa2xx.c [ARM] pxa: enable GPIO receivers after configuring pins 2009-05-18 21:52:09 +08:00
mfp-pxa3xx.c [ARM] pxa: move common MFP handling code into plat-pxa 2009-03-23 10:11:34 +08:00
mioa701_bootresume.S [ARM] pxa/MioA701: fix memory corruption. 2008-11-22 20:57:21 +08:00
mioa701.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
mp900.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
palmld.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
palmt5.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
palmtc.c [ARM] pxa: simplify the LCD pin configuration for pxa25x platforms 2010-03-02 07:40:46 +08:00
palmte2.c [ARM] pxa: simplify the LCD pin configuration for pxa25x platforms 2010-03-02 07:40:46 +08:00
palmtreo.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
palmtx.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
palmz72.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
pcm027.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
pcm990-baseboard.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
pm.c [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines 2009-06-11 23:25:09 +08:00
poodle.c [ARM] pxa: simplify the LCD pin configuration for pxa25x platforms 2010-03-02 07:40:46 +08:00
pxa2xx.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
pxa3xx.c [ARM] pxa: add EXT_WAKEUP interrupts handling for pxa3xx 2009-12-01 09:02:58 +08:00
pxa25x.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
pxa27x.c [ARM] pxa: introduce processor specific pxa27x_assert_ac97reset() 2010-03-02 07:40:47 +08:00
pxa300.c [ARM] pxa: add clock definition for graphics controller 2009-09-10 18:49:26 +08:00
pxa320.c [ARM] pxa: add clock definition for graphics controller 2009-09-10 18:49:26 +08:00
pxa930.c [ARM] pxa: support mfp of pxa935 2009-09-10 18:49:24 +08:00
raumfeld.c [ARM] pxa/raumfeld: add platform support 2009-12-18 15:34:38 +08:00
reset.c [ARM] pxa: allow gpio_reset drive high during normal work 2009-05-18 21:52:09 +08:00
saar.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
sharpsl_pm.c [ARM] pxa/zaurus: rename spitz_battery_levels_* to sharpsl_* 2009-12-01 09:03:01 +08:00
sharpsl.h [ARM] pxa/zaurus: rename spitz_battery_levels_* to sharpsl_* 2009-12-01 09:03:01 +08:00
sleep.S [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
smemc.c [ARM] pxa: avoid polluting the kernel's namespace 2008-11-28 16:04:54 +00:00
spitz_pm.c [ARM] pxa/zaurus: rename spitz_battery_levels_* to sharpsl_* 2009-12-01 09:03:01 +08:00
spitz.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
ssp.c [ARM] pxa: use platform_device_id table for SSP driver 2009-12-01 09:02:52 +08:00
standby.S [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
stargate2.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
tavorevb.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
time.c arm/{pxa,sa1100,nomadik}: Don't disable irqs in set_next_event and set_mode 2010-01-22 17:04:52 +01:00
tosa-bt.c rfkill: rewrite 2009-06-03 14:06:13 -04:00
tosa.c [ARM] pxa/tosa: make use of the matrix keypad driver 2010-03-02 07:40:48 +08:00
trizeps4.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
viper.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
xcep.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
zeus.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
zylonite_pxa300.c [ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot 2009-12-29 14:11:34 +08:00
zylonite_pxa320.c [ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot 2009-12-29 14:11:34 +08:00
zylonite.c [ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot 2009-12-29 14:11:34 +08:00