Compaction caches if a pageblock was scanned and no pages were isolated so
that the pageblocks can be skipped in the future to reduce scanning. This
information is not cleared by the page allocator based on activity due to
the impact it would have to the page allocator fast paths. Hence there is
a requirement that something clear the cache or pageblocks will be skipped
forever. Currently the cache is cleared if there were a number of recent
allocation failures and it has not been cleared within the last 5 seconds.
Time-based decisions like this are terrible as they have no relationship
to VM activity and is basically a big hammer.
Unfortunately, accurate heuristics would add cost to some hot paths so
this patch implements a rough heuristic. There are two cases where the
cache is cleared.
1. If a !kswapd process completes a compaction cycle (migrate and free
scanner meet), the zone is marked compact_blockskip_flush. When kswapd
goes to sleep, it will clear the cache. This is expected to be the
common case where the cache is cleared. It does not really matter if
kswapd happens to be asleep or going to sleep when the flag is set as
it will be woken on the next allocation request.
2. If there have been multiple failures recently and compaction just
finished being deferred then a process will clear the cache and start a
full scan. This situation happens if there are multiple high-order
allocation requests under heavy memory pressure.
The clearing of the PG_migrate_skip bits and other scans is inherently
racy but the race is harmless. For allocations that can fail such as THP,
they will simply fail. For requests that cannot fail, they will retry the
allocation. Tests indicated that scanning rates were roughly similar to
when the time-based heuristic was used and the allocation success rates
were similar.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Richard Davies <richard@arachsys.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Avi Kivity <avi@redhat.com>
Cc: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is almost entirely based on Rik's previous patches and discussions
with him about how this might be implemented.
Order > 0 compaction stops when enough free pages of the correct page
order have been coalesced. When doing subsequent higher order
allocations, it is possible for compaction to be invoked many times.
However, the compaction code always starts out looking for things to
compact at the start of the zone, and for free pages to compact things to
at the end of the zone.
This can cause quadratic behaviour, with isolate_freepages starting at the
end of the zone each time, even though previous invocations of the
compaction code already filled up all free memory on that end of the zone.
This can cause isolate_freepages to take enormous amounts of CPU with
certain workloads on larger memory systems.
This patch caches where the migration and free scanner should start from
on subsequent compaction invocations using the pageblock-skip information.
When compaction starts it begins from the cached restart points and will
update the cached restart points until a page is isolated or a pageblock
is skipped that would have been scanned by synchronous compaction.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Richard Davies <richard@arachsys.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Avi Kivity <avi@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When compaction was implemented it was known that scanning could
potentially be excessive. The ideal was that a counter be maintained for
each pageblock but maintaining this information would incur a severe
penalty due to a shared writable cache line. It has reached the point
where the scanning costs are a serious problem, particularly on
long-lived systems where a large process starts and allocates a large
number of THPs at the same time.
Instead of using a shared counter, this patch adds another bit to the
pageblock flags called PG_migrate_skip. If a pageblock is scanned by
either migrate or free scanner and 0 pages were isolated, the pageblock is
marked to be skipped in the future. When scanning, this bit is checked
before any scanning takes place and the block skipped if set.
The main difficulty with a patch like this is "when to ignore the cached
information?" If it's ignored too often, the scanning rates will still be
excessive. If the information is too stale then allocations will fail
that might have otherwise succeeded. In this patch
o CMA always ignores the information
o If the migrate and free scanner meet then the cached information will
be discarded if it's at least 5 seconds since the last time the cache
was discarded
o If there are a large number of allocation failures, discard the cache.
The time-based heuristic is very clumsy but there are few choices for a
better event. Depending solely on multiple allocation failures still
allows excessive scanning when THP allocations are failing in quick
succession due to memory pressure. Waiting until memory pressure is
relieved would cause compaction to continually fail instead of using
reclaim/compaction to try allocate the page. The time-based mechanism is
clumsy but a better option is not obvious.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Richard Davies <richard@arachsys.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Avi Kivity <avi@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 7db8889ab0 ("mm: have order > 0 compaction start
off where it left") and commit de74f1cc ("mm: have order > 0 compaction
start near a pageblock with free pages"). These patches were a good
idea and tests confirmed that they massively reduced the amount of
scanning but the implementation is complex and tricky to understand. A
later patch will cache what pageblocks should be skipped and
reimplements the concept of compact_cached_free_pfn on top for both
migration and free scanners.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Richard Davies <richard@arachsys.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Avi Kivity <avi@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Compaction's free scanner acquires the zone->lock when checking for
PageBuddy pages and isolating them. It does this even if there are no
PageBuddy pages in the range.
This patch defers acquiring the zone lock for as long as possible. In the
event there are no free pages in the pageblock then the lock will not be
acquired at all which reduces contention on zone->lock.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Richard Davies <richard@arachsys.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Avi Kivity <avi@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Richard Davies and Shaohua Li have both reported lock contention problems
in compaction on the zone and LRU locks as well as significant amounts of
time being spent in compaction. This series aims to reduce lock
contention and scanning rates to reduce that CPU usage. Richard reported
at https://lkml.org/lkml/2012/9/21/91 that this series made a big
different to a problem he reported in August:
http://marc.info/?l=kvm&m=134511507015614&w=2
Patch 1 defers acquiring the zone->lru_lock as long as possible.
Patch 2 defers acquiring the zone->lock as lock as possible.
Patch 3 reverts Rik's "skip-free" patches as the core concept gets
reimplemented later and the remaining patches are easier to
understand if this is reverted first.
Patch 4 adds a pageblock-skip bit to the pageblock flags to cache what
pageblocks should be skipped by the migrate and free scanners.
This drastically reduces the amount of scanning compaction has
to do.
Patch 5 reimplements something similar to Rik's idea except it uses the
pageblock-skip information to decide where the scanners should
restart from and does not need to wrap around.
I tested this on 3.6-rc6 + linux-next/akpm. Kernels tested were
akpm-20120920 3.6-rc6 + linux-next/akpm as of Septeber 20th, 2012
lesslock Patches 1-6
revert Patches 1-7
cachefail Patches 1-8
skipuseless Patches 1-9
Stress high-order allocation tests looked ok. Success rates are more or
less the same with the full series applied but there is an expectation
that there is less opportunity to race with other allocation requests if
there is less scanning. The time to complete the tests did not vary that
much and are uninteresting as were the vmstat statistics so I will not
present them here.
Using ftrace I recorded how much scanning was done by compaction and got this
3.6.0-rc6 3.6.0-rc6 3.6.0-rc6 3.6.0-rc6 3.6.0-rc6
akpm-20120920 lockless revert-v2r2 cachefail skipuseless
Total free scanned 360753976 515414028 565479007 17103281 18916589
Total free isolated 28524293597369 4048601 670493 727840
Total free efficiency 0.0079% 0.0070% 0.0072% 0.0392% 0.0385%
Total migrate scanned 247728664 822729112 1004645830 17946827 14118903
Total migrate isolated 2555324 3245937 3437501 616359 658616
Total migrate efficiency 0.0103% 0.0039% 0.0034% 0.0343% 0.0466%
The efficiency is worthless because of the nature of the test and the
number of failures. The really interesting point as far as this patch
series is concerned is the number of pages scanned. Note that reverting
Rik's patches massively increases the number of pages scanned indicating
that those patches really did make a difference to CPU usage.
However, caching what pageblocks should be skipped has a much higher
impact. With patches 1-8 applied, free page and migrate page scanning are
both reduced by 95% in comparison to the akpm kernel. If the basic
concept of Rik's patches are implemened on top then scanning then the free
scanner barely changed but migrate scanning was further reduced. That
said, tests on 3.6-rc5 indicated that the last patch had greater impact
than what was measured here so it is a bit variable.
One way or the other, this series has a large impact on the amount of
scanning compaction does when there is a storm of THP allocations.
This patch:
Compaction's migrate scanner acquires the zone->lru_lock when scanning a
range of pages looking for LRU pages to acquire. It does this even if
there are no LRU pages in the range. If multiple processes are compacting
then this can cause severe locking contention. To make matters worse
commit b2eef8c0 ("mm: compaction: minimise the time IRQs are disabled
while isolating pages for migration") releases the lru_lock every
SWAP_CLUSTER_MAX pages that are scanned.
This patch makes two changes to how the migrate scanner acquires the LRU
lock. First, it only releases the LRU lock every SWAP_CLUSTER_MAX pages
if the lock is contended. This reduces the number of times it
unnecessarily disables and re-enables IRQs. The second is that it defers
acquiring the LRU lock for as long as possible. If there are no LRU pages
or the only LRU pages are transhuge then the LRU lock will not be acquired
at all which reduces contention on zone->lru_lock.
[minchan@kernel.org: augment comment]
[akpm@linux-foundation.org: tweak comment text]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Richard Davies <richard@arachsys.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Avi Kivity <avi@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit c67fe3752a ("mm: compaction: Abort async compaction if locks
are contended or taking too long") addressed a lock contention problem
in compaction by introducing compact_checklock_irqsave() that effecively
aborting async compaction in the event of compaction.
To preserve existing behaviour it also moved a fatal_signal_pending()
check into compact_checklock_irqsave() but that is very misleading. It
"hides" the check within a locking function but has nothing to do with
locking as such. It just happens to work in a desirable fashion.
This patch moves the fatal_signal_pending() check to
isolate_migratepages_range() where it belongs. Arguably the same check
should also happen when isolating pages for freeing but it's overkill.
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
isolate_migratepages_range() might isolate no pages if for example when
zone->lru_lock is contended and running asynchronous compaction. In this
case, we should abort compaction, otherwise, compact_zone will run a
useless loop and make zone->lru_lock is even contended.
An additional check is added to ensure that cc.migratepages and
cc.freepages get properly drained whan compaction is aborted.
[minchan@kernel.org: Putback pages isolated for migration if aborting]
[akpm@linux-foundation.org: compact_zone_order requires non-NULL arg contended]
[akpm@linux-foundation.org: make compact_zone_order() require non-NULL arg `contended']
[minchan@kernel.org: Putback pages isolated for migration if aborting]
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Shaohua Li <shli@fusionio.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 0ee332c145 ("memblock: Kill early_node_map[]") removed
early_node_map[]. Clean up the comments to comply with that change.
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the existing interface function to set the NUMA node ID (NID) for the
regions, either memory or reserved region.
Signed-off-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Gavin Shan <shangw@linux.vnet.ibm.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
.fault now can retry. The retry can break state machine of .fault. In
filemap_fault, if page is miss, ra->mmap_miss is increased. In the second
try, since the page is in page cache now, ra->mmap_miss is decreased. And
these are done in one fault, so we can't detect random mmap file access.
Add a new flag to indicate .fault is tried once. In the second try, skip
ra->mmap_miss decreasing. The filemap_fault state machine is ok with it.
I only tested x86, didn't test other archs, but looks the change for other
archs is obvious, but who knows :)
Signed-off-by: Shaohua Li <shaohua.li@fusionio.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The x86 implementation of atomic_dec_if_positive is quite generic, so make
it available to all architectures.
This is needed for "swap: add a simple detector for inappropriate swapin
readahead".
[akpm@linux-foundation.org: do the "#define foo foo" trick in the conventional manner]
Signed-off-by: Shaohua Li <shli@fusionio.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If race between allocation and isolation in memory-hotplug offline
happens, some pages could be in MIGRATE_MOVABLE of free_list although the
pageblock's migratetype of the page is MIGRATE_ISOLATE.
The race could be detected by get_freepage_migratetype in
__test_page_isolated_in_pageblock. If it is detected, now EBUSY gets
bubbled all the way up and the hotplug operations fails.
But better idea is instead of returning and failing memory-hotremove, move
the free page to the correct list at the time it is detected. It could
enhance memory-hotremove operation success ratio although the race is
really rare.
Suggested by Mel Gorman.
[akpm@linux-foundation.org: small cleanup]
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Like below, memory-hotplug makes race between page-isolation
and page-allocation so it can hit BUG_ON in __offline_isolated_pages.
CPU A CPU B
start_isolate_page_range
set_migratetype_isolate
spin_lock_irqsave(zone->lock)
free_hot_cold_page(Page A)
/* without zone->lock */
migratetype = get_pageblock_migratetype(Page A);
/*
* Page could be moved into MIGRATE_MOVABLE
* of per_cpu_pages
*/
list_add_tail(&page->lru, &pcp->lists[migratetype]);
set_pageblock_isolate
move_freepages_block
drain_all_pages
/* Page A could be in MIGRATE_MOVABLE of free_list. */
check_pages_isolated
__test_page_isolated_in_pageblock
/*
* We can't catch freed page which
* is free_list[MIGRATE_MOVABLE]
*/
if (PageBuddy(page A))
pfn += 1 << page_order(page A);
/* So, Page A could be allocated */
__offline_isolated_pages
/*
* BUG_ON hit or offline page
* which is used by someone
*/
BUG_ON(!PageBuddy(page A));
This patch checks page's migratetype in freelist in
__test_page_isolated_in_pageblock. So now
__test_page_isolated_in_pageblock can check the page caused by above race
and can fail of memory offlining.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The page allocator caches the pageblock information in page->private while
it is in the PCP freelists but this is overwritten with the order of the
page when freed to the buddy allocator. This patch stores the migratetype
of the page in the page->index field so that it is available at all times
when the page remain in free_list.
This patch adds a new call site in __free_pages_ok so it might be overhead
a bit but it's for high order allocation. So I believe damage isn't hurt.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The page allocator uses set_page_private and page_private for handling
migratetype when it frees page. Let's replace them with [set|get]
_freepage_migratetype to make it more clear.
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Add ALLOC_CMA alloc flag and pass it to [__]zone_watermark_ok()
(from Minchan Kim).
* During watermark check decrease available free pages number by
free CMA pages number if necessary (unmovable allocations cannot
use pages from CMA areas).
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add NR_FREE_CMA_PAGES counter to be later used for checking watermark in
__zone_watermark_ok(). For simplicity and to avoid #ifdef hell make this
counter always available (not only when CONFIG_CMA=y).
[akpm@linux-foundation.org: use conventional migratetype naming]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Isolated free pages shouldn't be accounted to NR_FREE_PAGES counter. Fix
it by properly decreasing/increasing NR_FREE_PAGES counter in
set_migratetype_isolate()/unset_migratetype_isolate() and removing counter
adjustment for isolated pages from free_one_page() and split_free_page().
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
page->private gets re-used in __free_one_page() to store page order
(so trace_mm_page_pcpu_drain() may print order instead of migratetype)
thus migratetype value must be cached locally.
Fixes regression introduced in commit a7016235a6 ("mm: fix migratetype
bug which slowed swapping"). This caused incorrect data to be attached
to the mm_page_pcpu_drain trace event.
[akpm@linux-foundation.org: add comment]
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Drop clean cache pages instead of migration during alloc_contig_range() to
minimise allocation latency by reducing the amount of migration that is
necessary. It's useful for CMA because latency of migration is more
important than evicting the background process's working set. In
addition, as pages are reclaimed then fewer free pages for migration
targets are required so it avoids memory reclaiming to get free pages,
which is a contributory factor to increased latency.
I measured elapsed time of __alloc_contig_migrate_range() which migrates
10M in 40M movable zone in QEMU machine.
Before - 146ms, After - 7ms
[akpm@linux-foundation.org: fix nommu build]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reviewed-by: Mel Gorman <mgorman@suse.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Cc: Rik van Riel <riel@redhat.com>
Tested-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The variable must be static especially given the variable name.
s/RCU/SRCU/ over a few comments.
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
online_pages() does build_all_zonelists() and zone_pcp_update(), I think
offline_pages() should do it too.
When the zone has no memory to allocate, remove it from other nodes'
zonelists. zone_batchsize() depends on zone's present pages, if zone's
present pages are changed, zone's pcp should be updated.
Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During mremap(), the destination VMA is generally placed after the
original vma in rmap traversal order: in move_vma(), we always have
new_pgoff >= vma->vm_pgoff, and as a result new_vma->vm_pgoff >=
vma->vm_pgoff unless vma_merge() merged the new vma with an adjacent one.
When the destination VMA is placed after the original in rmap traversal
order, we can avoid taking the rmap locks in move_ptes().
Essentially, this reintroduces the optimization that had been disabled in
"mm anon rmap: remove anon_vma_moveto_tail". The difference is that we
don't try to impose the rmap traversal order; instead we just rely on
things being in the desired order in the common case and fall back to
taking locks in the uncommon case. Also we skip the i_mmap_mutex in
addition to the anon_vma lock: in both cases, the vmas are traversed in
increasing vm_pgoff order with ties resolved in tree insertion order.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Santos <daniel.santos@pobox.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
anon_vma_clone() expects new_vma->vm_{start,end,pgoff} to be correctly set
so that the new vma can be indexed on the anon interval tree.
copy_vma() was failing to do that, which broke mremap().
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Tested-by: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a CONFIG_DEBUG_VM_RB build option for the previously existing
DEBUG_MM_RB code. Now that Andi Kleen modified it to avoid using
recursive algorithms, we can expose it a bit more.
Also extend this code to validate_mm() after stack expansion, and to check
that the vma's start and last pgoffs have not changed since the nodes were
inserted on the anon vma interval tree (as it is important that the nodes
be reindexed after each such update).
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Santos <daniel.santos@pobox.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In file and anon rmap, we use interval trees to find potentially relevant
vmas and then call vma_address() to find the virtual address the given
page might be found at in these vmas. vma_address() used to include a
check that the returned address falls within the limits of the vma, but
this check isn't necessary now that we always use interval trees in rmap:
the interval tree just doesn't return any vmas which this check would find
to be irrelevant. As a result, we can replace the use of -EFAULT error
code (which then needed to be checked in every call site) with a
VM_BUG_ON().
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Santos <daniel.santos@pobox.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a large VMA (anon or private file mapping) is first touched, which
will populate its anon_vma field, and then split into many regions through
the use of mprotect(), the original anon_vma ends up linking all of the
vmas on a linked list. This can cause rmap to become inefficient, as we
have to walk potentially thousands of irrelevent vmas before finding the
one a given anon page might fall into.
By replacing the same_anon_vma linked list with an interval tree (where
each avc's interval is determined by its vma's start and last pgoffs), we
can make rmap efficient for this use case again.
While the change is large, all of its pieces are fairly simple.
Most places that were walking the same_anon_vma list were looking for a
known pgoff, so they can just use the anon_vma_interval_tree_foreach()
interval tree iterator instead. The exception here is ksm, where the
page's index is not known. It would probably be possible to rework ksm so
that the index would be known, but for now I have decided to keep things
simple and just walk the entirety of the interval tree there.
When updating vma's that already have an anon_vma assigned, we must take
care to re-index the corresponding avc's on their interval tree. This is
done through the use of anon_vma_interval_tree_pre_update_vma() and
anon_vma_interval_tree_post_update_vma(), which remove the avc's from
their interval tree before the update and re-insert them after the update.
The anon_vma stays locked during the update, so there is no chance that
rmap would miss the vmas that are being updated.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Santos <daniel.santos@pobox.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mremap() had a clever optimization where move_ptes() did not take the
anon_vma lock to avoid a race with anon rmap users such as page migration.
Instead, the avc's were ordered in such a way that the origin vma was
always visited by rmap before the destination. This ordering and the use
of page table locks rmap usage safe. However, we want to replace the use
of linked lists in anon rmap with an interval tree, and this will make it
harder to impose such ordering as the interval tree will always be sorted
by the avc->vma->vm_pgoff value. For now, let's replace the
anon_vma_moveto_tail() ordering function with proper anon_vma locking in
move_ptes(). Once we have the anon interval tree in place, we will
re-introduce an optimization to avoid taking these locks in the most
common cases.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Santos <daniel.santos@pobox.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update the generic interval tree code that was introduced in "mm: replace
vma prio_tree with an interval tree".
Changes:
- fixed 'endpoing' typo noticed by Andrew Morton
- replaced include/linux/interval_tree_tmpl.h, which was used as a
template (including it automatically defined the interval tree
functions) with include/linux/interval_tree_generic.h, which only
defines a preprocessor macro INTERVAL_TREE_DEFINE(), which itself
defines the interval tree functions when invoked. Now that is a very
long macro which is unfortunate, but it does make the usage sites
(lib/interval_tree.c and mm/interval_tree.c) a bit nicer than previously.
- make use of RB_DECLARE_CALLBACKS() in the INTERVAL_TREE_DEFINE() macro,
instead of duplicating that code in the interval tree template.
- replaced vma_interval_tree_add(), which was actually handling the
nonlinear and interval tree cases, with vma_interval_tree_insert_after()
which handles only the interval tree case and has an API that is more
consistent with the other interval tree handling functions.
The nonlinear case is now handled explicitly in kernel/fork.c dup_mmap().
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Santos <daniel.santos@pobox.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Provide rb_insert_augmented() and rb_erase_augmented() through a new
rbtree_augmented.h include file. rb_erase_augmented() is defined there as
an __always_inline function, in order to allow inlining of augmented
rbtree callbacks into it. Since this generates a relatively large
function, each augmented rbtree user should make sure to have a single
call site.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After both prio_tree users have been converted to use red-black trees,
there is no need to keep around the prio tree library anymore.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kmemleak uses a tree where each node represents an allocated memory object
in order to quickly find out what object a given address is part of.
However, the objects don't overlap, so rbtrees are a better choice than
prio tree for this use. They are both faster and have lower memory
overhead.
Tested by booting a kernel with kmemleak enabled, loading the
kmemleak_test module, and looking for the expected messages.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Implement an interval tree as a replacement for the VMA prio_tree. The
algorithms are similar to lib/interval_tree.c; however that code can't be
directly reused as the interval endpoints are not explicitly stored in the
VMA. So instead, the common algorithm is moved into a template and the
details (node type, how to get interval endpoints from the node, etc) are
filled in using the C preprocessor.
Once the interval tree functions are available, using them as a
replacement to the VMA prio tree is a relatively simple, mechanical job.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch 1 implements support for interval trees, on top of the augmented
rbtree API. It also adds synthetic tests to compare the performance of
interval trees vs prio trees. Short answers is that interval trees are
slightly faster (~25%) on insert/erase, and much faster (~2.4 - 3x)
on search. It is debatable how realistic the synthetic test is, and I have
not made such measurements yet, but my impression is that interval trees
would still come out faster.
Patch 2 uses a preprocessor template to make the interval tree generic,
and uses it as a replacement for the vma prio_tree.
Patch 3 takes the other prio_tree user, kmemleak, and converts it to use
a basic rbtree. We don't actually need the augmented rbtree support here
because the intervals are always non-overlapping.
Patch 4 removes the now-unused prio tree library.
Patch 5 proposes an additional optimization to rb_erase_augmented, now
providing it as an inline function so that the augmented callbacks can be
inlined in. This provides an additional 5-10% performance improvement
for the interval tree insert/erase benchmark. There is a maintainance cost
as it exposes augmented rbtree users to some of the rbtree library internals;
however I think this cost shouldn't be too high as I expect the augmented
rbtree will always have much less users than the base rbtree.
I should probably add a quick summary of why I think it makes sense to
replace prio trees with augmented rbtree based interval trees now. One of
the drivers is that we need augmented rbtrees for Rik's vma gap finding
code, and once you have them, it just makes sense to use them for interval
trees as well, as this is the simpler and more well known algorithm. prio
trees, in comparison, seem *too* clever: they impose an additional 'heap'
constraint on the tree, which they use to guarantee a faster worst-case
complexity of O(k+log N) for stabbing queries in a well-balanced prio
tree, vs O(k*log N) for interval trees (where k=number of matches,
N=number of intervals). Now this sounds great, but in practice prio trees
don't realize this theorical benefit. First, the additional constraint
makes them harder to update, so that the kernel implementation has to
simplify things by balancing them like a radix tree, which is not always
ideal. Second, the fact that there are both index and heap properties
makes both tree manipulation and search more complex, which results in a
higher multiplicative time constant. As it turns out, the simple interval
tree algorithm ends up running faster than the more clever prio tree.
This patch:
Add two test modules:
- prio_tree_test measures the performance of lib/prio_tree.c, both for
insertion/removal and for stabbing searches
- interval_tree_test measures the performance of a library of equivalent
functionality, built using the augmented rbtree support.
In order to support the second test module, lib/interval_tree.c is
introduced. It is kept separate from the interval_tree_test main file
for two reasons: first we don't want to provide an unfair advantage
over prio_tree_test by having everything in a single compilation unit,
and second there is the possibility that the interval tree functionality
could get some non-test users in kernel over time.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As proposed by Peter Zijlstra, this makes it easier to define the augmented
rbtree callbacks.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
convert arch/x86/mm/pat_rbtree.c to the proposed augmented rbtree api
and remove the old augmented rbtree implementation.
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce new augmented rbtree APIs that allow minimal recalculation of
augmented node information.
A new callback is added to the rbtree insertion and erase rebalancing
functions, to be called on each tree rotations. Such rotations preserve
the subtree's root augmented value, but require recalculation of the one
child that was previously located at the subtree root.
In the insertion case, the handcoded search phase must be updated to
maintain the augmented information on insertion, and then the rbtree
coloring/rebalancing algorithms keep it up to date.
In the erase case, things are more complicated since it is library
code that manipulates the rbtree in order to remove internal nodes.
This requires a couple additional callbacks to copy a subtree's
augmented value when a new root is stitched in, and to recompute
augmented values down the ancestry path when a node is removed from
the tree.
In order to preserve maximum speed for the non-augmented case,
we provide two versions of each tree manipulation function.
rb_insert_augmented() is the augmented equivalent of rb_insert_color(),
and rb_erase_augmented() is the augmented equivalent of rb_erase().
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Small test to measure the performance of augmented rbtrees.
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Various minor optimizations in rb_erase():
- Avoid multiple loading of node->__rb_parent_color when computing parent
and color information (possibly not in close sequence, as there might
be further branches in the algorithm)
- In the 1-child subcase of case 1, copy the __rb_parent_color field from
the erased node to the child instead of recomputing it from the desired
parent and color
- When searching for the erased node's successor, differentiate between
cases 2 and 3 based on whether any left links were followed. This avoids
a condition later down.
- In case 3, keep a pointer to the erased node's right child so we don't
have to refetch it later to adjust its parent.
- In the no-childs subcase of cases 2 and 3, place the rebalance assigment
last so that the compiler can remove the following if(rebalance) test.
Also, added some comments to illustrate cases 2 and 3.
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
An interesting observation for rb_erase() is that when a node has
exactly one child, the node must be black and the child must be red.
An interesting consequence is that removing such a node can be done by
simply replacing it with its child and making the child black,
which we can do efficiently in rb_erase(). __rb_erase_color() then
only needs to handle the no-childs case and can be modified accordingly.
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In rb_erase, move the easy case (node to erase has no more than
1 child) first. I feel the code reads easier that way.
Signed-off-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add __rb_change_child() as an inline helper function to replace code that
would otherwise be duplicated 4 times in the source.
No changes to binary size or speed.
Signed-off-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Just a small fix to make sparse happy.
Signed-off-by: Michel Lespinasse <walken@google.com>
Reported-by: Fengguang Wu <wfg@linux.intel.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When looking to fetch a node's sibling, we went through a sequence of:
- check if node is the parent's left child
- if it is, then fetch the parent's right child
This can be replaced with:
- fetch the parent's right child as an assumed sibling
- check that node is NOT the fetched child
This avoids fetching the parent's left child when node is actually
that child. Saves a bit on code size, though it doesn't seem to make
a large difference in speed.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Santos <daniel.santos@pobox.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Set comment and indentation style to be consistent with linux coding style
and the rest of the file, as suggested by Peter Zijlstra
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Santos <daniel.santos@pobox.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In __rb_erase_color(), we often already have pointers to the nodes being
rotated and/or know what their colors must be, so we can generate more
efficient code than the generic __rb_rotate_left() and __rb_rotate_right()
functions.
Also when the current node is red or when flipping the sibling's color,
the parent is already known so we can use the more efficient
rb_set_parent_color() function to set the desired color.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Santos <daniel.santos@pobox.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In __rb_erase_color(), we have to select one of 3 cases depending on the
color on the 'other' node children. If both children are black, we flip a
few node colors and iterate. Otherwise, we do either one or two tree
rotations, depending on the color of the 'other' child opposite to 'node',
and then we are done.
The corresponding logic had duplicate checks for the color of the 'other'
child opposite to 'node'. It was checking it first to determine if both
children are black, and then to determine how many tree rotations are
required. Rearrange the logic to avoid that extra check.
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Santos <daniel.santos@pobox.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In __rb_erase_color(), we were always setting a node to black after
exiting the main loop. And in one case, after fixing up the tree to
satisfy all rbtree invariants, we were setting the current node to root
just to guarantee a loop exit, at which point the root would be set to
black. However this is not necessary, as the root of an rbtree is already
known to be black. The only case where the color flip is required is when
we exit the loop due to the current node being red, and it's easiest to
just do the flip at that point instead of doing it after the loop.
[adrian.hunter@intel.com: perf tools: fix build for another rbtree.c change]
Signed-off-by: Michel Lespinasse <walken@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Daniel Santos <daniel.santos@pobox.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
