David Howells noticed that repeating the same mount option twice during an
NFS mount request can result in orphaned memory in certain cases.
Only the client_address and mount_server.hostname strings are initialized
in the mount parsing loop, so those appear to be the only two pointers that
might be written over by repeating a mount option. The strings in the
nfs_server section of the nfs_parsed_mount_data structure are set only once
after the options are parsed, thus these are not susceptible to being
overwritten.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The rfc doesn't give any reason it shouldn't be possible to set an
attribute on a non-regular file. And if the server supports it, then it
shouldn't be up to us to prevent it.
Thanks to Erez for the report and Trond for further analysis.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Tested-by: Erez Zadok <ezk@cs.sunysb.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
There are no interruptible waits for asynchronous RPC tasks, so we don't
need to wrap calls to rpc_run_task() with an
rpc_clnt_sigmask/rpc_clnt_unsigmask pair.
Instead we can wrap the wait_for_completion_interruptible() in
nfs_direct_wait(). This means that we completely optimise away sigmask
setting for the case of non-blocking aio/dio.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The variable "sin" is a pointer, so sizeof(sin) is the size of a pointer,
not the size of thing that sin points to.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: Follow recommendations of Chapter 5 of Documentation/CodingStyle
and use "u32" instead of "__u32" for types in definitions that are not
shared with user space.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
rpc_create() can already fill in the hostname with a string representation
of the server's IP address, so remove redundant logic in in
rpcb_getport_sync() that does that.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: document the rule (kfree) and the exceptions
(RPC_DISPLAY_PROTO and RPC_DISPLAY_NETID) when freeing the objects in
a transport's address_strings array.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
RPC protocol version numbers are unsigned.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: pass 5 arguments to nlmclnt_init() in a structure similar to the
new nfs_client_initdata structure.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Now that each NFS mount point caches its own nlm_host structure, it can be
passed to nlmclnt_proc() for each lock request. By pinning an nlm_host for
each mount point, we trade the overhead of looking up or creating a fresh
nlm_host struct during every NLM procedure call for a little extra memory.
We also restrict the nlmclnt_proc symbol to limit the use of this call to
in-tree modules.
Note that nlm_lookup_host() (just removed from the client's per-request
NLM processing) could also trigger an nlm_host garbage collection. Now
client-side nlm_host garbage collection occurs only during NFS mount
processing. Since the NFS client now holds a reference on these nlm_host
structures, they wouldn't have been affected by garbage collection
anyway.
Given that nlm_lookup_host() reorders the global nlm_host chain after
every successful lookup, and that a garbage collection could be triggered
during the call, we've removed a significant amount of per-NLM-request
CPU processing overhead.
Sidebar: there are only a few remaining references to the internals of
NFS inodes in the client-side NLM code. The only references I found are
related to extracting or comparing the inode's file handle via NFS_FH().
One is in nlmclnt_grant(); the other is in nlmclnt_setlockargs().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cache an appropriate nlm_host structure in the NFS client's mount point
metadata for later use.
Note that there is no need to set NFS_MOUNT_NONLM in the error case -- if
nfs_start_lockd() returns a non-zero value, its callers ensure that the
mount request fails outright.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We would like to remove the per-lock-operation nlm_lookup_host() call from
nlmclnt_proc().
The new architecture pins an nlm_host structure to each NFS client
superblock that has the "lock" mount option set. The NFS client passes
in the pinned nlm_host structure during each call to nlmclnt_proc(). NFS
client unmount processing "puts" the nlm_host so it can be garbage-
collected later.
This patch introduces externally callable NLM functions that handle
mount-time nlm_host set up and tear-down.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: have the set up routines explicitly pass the strings to be used
for the transport name and NETID. This removes a number of conditionals
and dependencies on rpc_xprt.prot, which is overloaded.
Tighten up type checking on the address_strings array while we're at it.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The cookie->len field is unsigned, so the loop index variable in
nlmdbg_cookie2a() should also be unsigned.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: commit 4899f9c8 added nfs_write_end(), which introduces a
conditional expression that returns an unsigned integer in one arm and
a signed integer in the other.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: PAGE_CACHE_SIZE is unsigned, and nfs_pageio_init() takes a size_t.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: always use the same type when handling buffer lengths. As a
bonus, this prevents a mixed sign comparison in idmap_lookup_name.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The idmap_pipe_upcall() function expects the copy_to_user() function to
return a negative error value if the call fails, but copy_to_user()
returns an unsigned long number of bytes that couldn't be copied.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up white space damage and use standard kernel coding conventions for
return statements.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The gss_pipe_upcall() function expects the copy_to_user() function to
return a negative error value if the call fails, but copy_to_user()
returns an unsigned long number of bytes that couldn't be copied.
Can rpc_pipefs actually retry a partially completed upcall read? If
not, then gss_pipe_upcall() should punt any partial read, just like the
upcall logic in net/sunrpc/cache.c.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Currently, if you have a server mounted using networking protocol, you
cannot specify a different value using the 'proto=' option on another
mountpoint.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In order to be able to support setting the timeo and retrans parameters on
a per-mountpoint basis, we move the rpc_timeout structure into the
rpc_clnt.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Now that the needed IPv6 infrastructure is in place, allow the NFS client's
IP address parser to generate AF_INET6 addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Replace the nfs_server and mount_server address fields in the
nfs_parsed_mount_data structure with a "struct sockaddr_storage"
instead of a "struct sockaddr_in".
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Refactor the logic to parse incoming text-based IP addresses. Use the
in4_pton() function instead of the older in_aton(), following the lead
of the in-kernel CIFS client.
Later we'll add IPv6 address parsing using the matching in6_pton()
function. For now we can't allow IPv6 address parsing: we must expand
the size of the address storage fields in the nfs_parsed_mount_options
struct before we can parse and store IPv6 addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
In the name of address family compatibility, we can't have the NIP_FMT and
NIPQUAD macros in nfs_try_mount(). Instead, we can make use of an unused
mount option to display the mount server's hostname.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Change the addr field in the nfs_clone_mount structure to store a "struct
sockaddr *" to support non-IPv4 addresses in the NFS client.
Note this is mostly a cosmetic change, and does not actually allow
referrals using IPv6 addresses. The existing referral code assumes that
the server returns a string that represents an IPv4 address. This code
needs to support hostnames and IPv6 addresses as well as IPv4 addresses,
thus it will need to be reorganized completely (to handle DNS resolution
in user space).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Adjust the arguments and callers of nfs4_set_client() to pass a "struct
sockaddr *" instead of a "struct sockaddr_in *" to support non-IPv4
addresses in the NFS client.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Adjust arguments and callers of nfs_get_client() to pass a
"struct sockaddr *" instead of "struct sockaddr_in *" to support
non-IPv4 addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Adjust arguments and callers of nfs_find_client() to pass a
"struct sockaddr *" instead of "struct sockaddr_in *" to support non-IPv4
addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Trond: Also fix up protocol version number argument in nfs_find_client() to
use the correct u32 type.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Change the addr field in the cb_recallargs struct to a "struct sockaddr *"
to support non-IPv4 addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Change the addr field in the cb_getattrargs struct to a "struct sockaddr *"
to support non-IPv4 addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Prepare for managing larger addresses in the NFS client by widening the
nfs_client struct's cl_addr field.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
(Modified to work with the new parameters for nfs_alloc_client)
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Create a helper function to set the default NFS port for NFSv4 mount
points. The helper supports both AF_INET and AF_INET6 family addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
We'll need to set the port number of an AF_INET or AF_INET6 address in
several places in fs/nfs/super.c, so introduce a helper that can manage
this for us. We put this helper to immediate use.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Add support to nfs_verify_server_address for recognizing AF_INET6
addresses.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Refactor nfs_compare_super() and add AF_INET6 support.
Replace the generic memcmp() to document explicitly what parts of the
addresses must match in this check, and make the comparison independent
of the lengths of both addresses.
A side benefit is both tests are more computationally efficient than a
memcmp().
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: fix an outdated block comment, and address a comparison
between a signed and unsigned integer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Clean up: The client side peer address is available in callback_proc.c,
so move a dprintk out of fs/nfs/callback.c and into
fs/nfs/callback_proc.c.
This is more consistent with other debugging messages, and the proc
routines have more information about each request to display.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
To ensure the NFS client displays IPv6 addresses properly, replace
address family-specific NIPQUAD() invocations with a call to the RPC
client to get a formatted string representing the remote peer's
address.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: Aurelien Charbon <aurelien.charbon@ext.bull.net>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
