[ Upstream commit cdd73cc545c0fb9b1a1f7b209f4f536e7990cff4 ]
ipv6_find_hdr() does not validate that this is an IPv6 packet. Add a
sanity check for calling ipv6_find_hdr() to make sure an IPv6 packet
is passed for parsing.
Fixes: 96518518cc ("netfilter: add nftables")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ce6095e3bff8e20ce018b050960b527e298f7df ]
The mlx5_ib_bind_slave_port() doesn't remove multiport device from the
unaffiliated list, but mlx5_ib_unbind_slave_port() did it. This unbalanced
flow caused to the situation where mlx5_ib_unaffiliated_port_list was
changed during iteration.
Fixes: 32f69e4be2 ("{net, IB}/mlx5: Manage port association for multiport RoCE")
Link: https://lore.kernel.org/r/2726e6603b1e6ecfe76aa5a12a063af72173bcf7.1622477058.git.leonro@nvidia.com
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 979ebc54cf13bd1e3eb6e21766d208d5de984fb8 ]
Firmware has added assert if beacon template is received after
vdev_down. Firmware expects beacon template after vdev_start
and before vdev_up. This change is needed to support MBSSID EMA
cases in firmware.
Hence, Change the sequence in ath11k as expected from firmware.
This new change is not causing any issues with older
firmware.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1.r3-00011-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1.r4-00008-QCAHKSWPL_SILICONZ-1
Fixes: d5c65159f2 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Seevalamuthu Mariappan <seevalam@codeaurora.org>
[sven@narfation.org: added tested-on/fixes information]
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210525133028.2805615-1-sven@narfation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9ca70c735ce66fc6a0e02c8b6958434f74ef8de ]
When the code execute this if statement, the value of ret is 0.
However, we can see from the ath10k_warn() log that the value of
ret should be -EINVAL.
Clean up smatch warning:
drivers/net/wireless/ath/ath10k/mac.c:5596 ath10k_add_interface() warn:
missing error code 'ret'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: ccec9038c7 ("ath10k: enable raw encap mode and software crypto engine")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1621939577-62218-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 515bda1d1e51c64edf2a384a58801f85a80a3f2d ]
All error paths but this one 'goto err' in order to release some
resources.
Fix this.
Fixes: d5c65159f2 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/e959eb544f3cb04258507d8e25a6f12eab126bde.1621676864.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f60f4685699aa6006e58e424637e8e413e0a94d ]
A previous commit 4f68ef64cd ("cw1200: Fix concurrency
use-after-free bugs in cw1200_hw_scan()") tried to fix a seemingly
use-after-free bug between cw1200_bss_info_changed() and
cw1200_hw_scan(), where the former frees a sk_buff pointed
to by frame.skb, and the latter accesses the sk_buff
pointed to by frame.skb. However, this issue should be a
false alarm because:
(1) "frame.skb" is not a shared variable between the above
two functions, because "frame" is a local function variable,
each of the two functions has its own local "frame" - they
just happen to have the same variable name.
(2) the sk_buff(s) pointed to by these two "frame.skb" are
also two different object instances, they are individually
allocated by different dev_alloc_skb() within the two above
functions. To free one object instance will not invalidate
the access of another different one.
Based on these facts, the previous commit should be unnecessary.
Moreover, it also introduced a missing unlock which was
addressed in a subsequent commit 51c8d24101 ("cw1200: fix missing
unlock on error in cw1200_hw_scan()"). Now that the
original use-after-free is unreal, these two commits should
be reverted. This patch performs the reversion.
Fixes: 4f68ef64cd ("cw1200: Fix concurrency use-after-free bugs in cw1200_hw_scan()")
Fixes: 51c8d24101 ("cw1200: fix missing unlock on error in cw1200_hw_scan()")
Signed-off-by: Hang Zhang <zh.nvgt@gmail.com>
Acked-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210521223238.25020-1-zh.nvgt@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a25344d5177c2b9285532236dc3d10a091f39a8 ]
If 'brcms_attach()' fails, we must undo the previous 'ieee80211_alloc_hw()'
as already done in the remove function.
Fixes: 5b435de0d7 ("net: wireless: add brcm80211 drivers")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/8fbc171a1a493b38db5a6f0873c6021fca026a6c.1620852921.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ea7a1e05c7ff5ffc9f9ec1f0849f6ceb7fcd57c ]
brcmf_sdiod_remove has been called inside brcmf_sdiod_probe when fails,
so there's no need to call another one. Otherwise, sdiodev->freezer
would be double freed.
Fixes: 7836102a75 ("brcmfmac: reset SDIO bus on a firmware crash")
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210601100128.69561-1-tongtiangen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a1590934d9a02e570636432b93052c0c035f31f ]
The rx_lastpkt_rssi field provided by the firmware is suitable for
NL80211_STA_INFO_{SIGNAL,CHAIN_SIGNAL}, while the rssi field is an
average. Fix up the assignments and set the correct STA_INFO bits. This
lets userspace know that the average RSSI is part of the station info.
Fixes: cae355dc90 ("brcmfmac: Add RSSI information to get_station.")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210506132010.3964484-2-alsi@bang-olufsen.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit feb45643762172110cb3a44f99dd54304f33b711 ]
The sinfo->chains field is a bitmask for filled values in chain_signal
and chain_signal_avg, not a count. Treat it as such so that the driver
can properly report per-chain RSSI information.
Before (MIMO mode):
$ iw dev wlan0 station dump
...
signal: -51 [-51] dBm
After (MIMO mode):
$ iw dev wlan0 station dump
...
signal: -53 [-53, -54] dBm
Fixes: cae355dc90 ("brcmfmac: Add RSSI information to get_station.")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210506132010.3964484-1-alsi@bang-olufsen.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77a0989baa427dbd242c5784d05a53ca3d197d43 ]
Fix to return -EINVAL from the error handling case instead of 0, as done
elsewhere in this function.
Fixes: 61e115a56d ("[SSB]: add Sonics Silicon Backplane bus support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210515072949.7151-1-thunder.leizhen@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef48667557c53d4b51a1ee3090eab7699324c9de ]
Right now wcn->hal_buf is allocated in wcn36xx_start(). This is a problem
since we should have setup all of the buffers we required by the time
ieee80211_register_hw() is called.
struct ieee80211_ops callbacks may run prior to mac_start() and therefore
wcn->hal_buf must be initialized.
This is easily remediated by moving the allocation to probe() taking the
opportunity to tidy up freeing memory by using devm_kmalloc().
Fixes: 8e84c25821 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605173347.2266003-1-bryan.odonoghue@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c586f53ae159c6c1390f093a1ec94baef2df9f3a ]
Remove the PLL clock gates as the allowing to gate the sys1_pll_266m breaks
the uSDHC module which is sporadically unable to enumerate devices after
this change. Also it makes AMP clock management harder with no obvious
benefit to Linux, so just revert the change.
Link: https://lore.kernel.org/r/20210528180135.1640876-1-l.stach@pengutronix.de
Fixes: b04383b6a5 ("clk: imx8mq: Define gates for pll1/2 fixed dividers")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab372c2293f5d0b279f31c8d768566ea37602dc9 ]
In hwsim_subscribe_all_others, the error handling code performs
incorrectly if the second hwsim_alloc_edge fails. When this issue occurs,
it goes to sub_fail, without cleaning the edges allocated before.
Fixes: f25da51fdc ("ieee802154: hwsim: add replacement for fakelb")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210611015812.1626999-1-mudongliangabcd@gmail.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 272fdc0c4542fad173b44965be02a16d6db95499 ]
kernel test robot reports over 200 build errors and warnings
that are due to this Kconfig problem when CARL9170=m,
MAC80211=y, and LEDS_CLASS=m.
WARNING: unmet direct dependencies detected for MAC80211_LEDS
Depends on [n]: NET [=y] && WIRELESS [=y] && MAC80211 [=y] && (LEDS_CLASS [=m]=y || LEDS_CLASS [=m]=MAC80211 [=y])
Selected by [m]:
- CARL9170_LEDS [=y] && NETDEVICES [=y] && WLAN [=y] && WLAN_VENDOR_ATH [=y] && CARL9170 [=m]
CARL9170_LEDS selects MAC80211_LEDS even though its kconfig
dependencies are not met. This happens because 'select' does not follow
any Kconfig dependency chains.
Fix this by making CARL9170_LEDS depend on MAC80211_LEDS, where
the latter supplies any needed dependencies on LEDS_CLASS.
Fixes: 1d7e1e6b1b ("carl9170: Makefile, Kconfig files and MAINTAINERS")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Christian Lamparter <chunkeey@googlemail.com>
Cc: linux-wireless@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Christian Lamparter <chunkeey@googlemail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210530031134.23274-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2783e2f39ba99178dedfc1646d5cc0979d1bab3 ]
When chip_id is not supported, the resources will be freed
on path err_unsupported, these resources will also be freed
when calling ath10k_pci_remove(), it will cause double free,
so return -ENODEV when it doesn't support the device with wrong
chip_id.
Fixes: c0c378f990 ("ath10k: remove target soc ps code")
Fixes: 7505f7c3ec ("ath10k: create a chip revision whitelist")
Fixes: f8914a1462 ("ath10k: restore QCA9880-AR1A (v1) detection")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210522105822.1091848-3-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e88dd431d2345acdb7a549f3e88aaf4c2a307a1 ]
When chip id is not supported, it go to path err_unsupported
to print the error message.
Fixes: f8914a1462 ("ath10k: restore QCA9880-AR1A (v1) detection")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210522105822.1091848-2-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca16b429f39b4ce013bfa7e197f25681e65a2a42 ]
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 668da745af ("tools: bpftool: add support for quotations ...")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20210609115916.2186872-1-chengzhihao1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fbbf23ddb2a1cc0c12c9f78237d1561c24006f50 ]
The object surf is not fully initialized and the uninitialized
field surf.data is being copied by the call to qxl_bo_create
via the call to qxl_gem_object_create. Set surf.data to zero
to ensure garbage data from the stack is not being copied.
Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: f64122c1f6 ("drm: add new QXL driver. (v1.4)")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210608161313.161922-1-colin.king@canonical.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc336ae622df0ec114dbe5551a4d2760c535ecd0 ]
On 5P49V6965, when an output is enabled we enable the corresponding
FOD. When this happens for the first time, and specifically when writing
register VC5_OUT_DIV_CONTROL in vc5_clk_out_prepare(), all other outputs
are stopped for a short time and then restarted.
According to Renesas support this is intended: "The reason for that is VC6E
has synced up all output function".
This behaviour can be disabled at least on VersaClock 6E devices, of which
only the 5P49V6965 is currently implemented by this driver. This requires
writing bit 7 (bypass_sync{1..4}) in register 0x20..0x50. Those registers
are named "Unused Factory Reserved Register", and the bits are documented
as "Skip VDDO<N> verification", which does not clearly explain the relation
to FOD sync. However according to Renesas support as well as my testing
setting this bit does prevent disabling of all clock outputs when enabling
a FOD.
See "VersaClock ® 6E Family Register Descriptions and Programming Guide"
(August 30, 2018), Table 116 "Power Up VDD check", page 58:
https://www.renesas.com/us/en/document/mau/versaclock-6e-family-register-descriptions-and-programming-guide
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210527211647.1520720-1-luca@lucaceresoli.net
Fixes: 2bda748e6a ("clk: vc5: Add support for IDT VersaClock 5P49V6965")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e075a7811977ff51c917a65ed1896e08231d2615 ]
If the of_get_named_gpio_flags call fails in vc4_hdmi_bind, we jump to
the err_unprepare_hsm label. That label will then call
pm_runtime_disable and put_device on the DDC device.
We just retrieved the DDC device, so the latter is definitely justified.
However at that point we still haven't called pm_runtime_enable, so the
call to pm_runtime_disable is not supposed to be there.
Fixes: 10ee275cb1 ("drm/vc4: prepare for CEC support")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210524131852.263883-1-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e566003571244f508408f59ce78f6ac2ccdba8e ]
VEXPRESS_CONFIG needs to either be missing, built-in, or modular when
pl111 is modular. Update the Kconfig to reflect the need.
Fixes: 4dc7c97d04dc ("drm/pl111: depend on CONFIG_VEXPRESS_CONFIG")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210604014055.4060521-1-keescook@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32a25f2ea690dfaace19f7a3a916f5d7e1ddafe8 ]
To avoid the following failure when trying to load the rdma_rxe module
while IPv6 is disabled, add a check for EAFNOSUPPORT and ignore the
failure, also delete the needless debug print from rxe_setup_udp_tunnel().
$ modprobe rdma_rxe
modprobe: ERROR: could not insert 'rdma_rxe': Operation not permitted
Fixes: dfdd6158ca ("IB/rxe: Fix kernel panic in udp_setup_tunnel")
Link: https://lore.kernel.org/r/20210603090112.36341-1-kamalheib1@gmail.com
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f97442887275d11c88c2899e720fe945c1f61488 ]
The mlx4 and mlx5 implemented differently the WQ input checks. Instead of
duplicating mlx4 logic in the mlx5, let's prepare the input in the central
place.
The mlx5 implementation didn't check for validity of state input. It is
not real bug because our FW checked that, but still worth to fix.
Fixes: f213c05272 ("IB/uverbs: Add WQ support")
Link: https://lore.kernel.org/r/ac41ad6a81b095b1a8ad453dcf62cf8d3c5da779.1621413310.git.leonro@nvidia.com
Reported-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c5eee0afca09cbde6bd00f77876754aaa552970 ]
Currently vlan modification action checks existence of vlan priority by
comparing it to 0. Therefore it is impossible to modify existing vlan
tag to have priority 0.
For example, the following tc command will change the vlan id but will
not affect vlan priority:
tc filter add dev eth1 ingress matchall action vlan modify id 300 \
priority 0 pipe mirred egress redirect dev eth2
The incoming packet on eth1:
ethertype 802.1Q (0x8100), vlan 200, p 4, ethertype IPv4
will be changed to:
ethertype 802.1Q (0x8100), vlan 300, p 4, ethertype IPv4
although the user has intended to have p == 0.
The fix is to add tcfv_push_prio_exists flag to struct tcf_vlan_params
and rely on it when deciding to set the priority.
Fixes: 45a497f2d1 (net/sched: act_vlan: Introduce TCA_VLAN_ACT_MODIFY vlan action)
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eebd49a4ffb420a991c606e54aa3c9f02857a334 ]
In commit 68dc022d04eb ("xfrm: BEET mode doesn't support fragments
for inner packets"), it tried to fix the issue that in TX side the
packet is fragmented before the ESP encapping while in the RX side
the fragments always get reassembled before decapping with ESP.
This is not true for IPv6. IPv6 is different, and it's using exthdr
to save fragment info, as well as the ESP info. Exthdrs are added
in TX and processed in RX both in order. So in the above case, the
ESP decapping will be done earlier than the fragment reassembling
in TX side.
Here just remove the fragment check for the IPv6 inner packets to
recover the fragments support for BEET mode.
Fixes: 68dc022d04eb ("xfrm: BEET mode doesn't support fragments for inner packets")
Reported-by: Xiumei Mu <xmu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56bb7c28ad00e7bcfc851c4e183c42d148d3ad4e ]
The 600MHz is a too high clock rate for some SoC versions for the video
decoder hardware and this may cause stability issues. Use 300MHz for the
video decoder by default, which is supported by all hardware versions.
Fixes: ed1a2459e2 ("clk: tegra: Add Tegra20/30 EMC clock implementation")
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 015dbf5662fd689d581c0bc980711b073ca09a1a ]
Fix to return -EFAULT from the error handling case instead of 0, as done
elsewhere in this function.
By the way, when get_zeroed_page() fails, directly return -ENOMEM to
simplify code.
Fixes: 2c69448bbc ("ehea: DLPAR memory add fix")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210528085555.9390-1-thunder.leizhen@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ecd7e290bee0ab9cf75b79a367a4cc113cf8292 ]
sess->stats and sess->stats->pcpu_stats objects are freed
when sysfs entry is removed. If something wrong happens and
session is closed before sysfs entry is created,
sess->stats and sess->stats->pcpu_stats objects are not freed.
This patch adds freeing of them at three places:
1. When client uses wrong address and session creation fails.
2. When client fails to create a sysfs entry.
3. When client adds wrong address via sysfs add_path.
Fixes: 215378b838 ("RDMA/rtrs: client: sysfs interface functions")
Link: https://lore.kernel.org/r/20210528113018.52290-21-jinpu.wang@ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b73b799c25c68a4703cd6c5ac4518006d9865b8 ]
The queue_depth is a module parameter for rtrs_server. It is used on the
client side to determing the queue_depth of the request queue for the RNBD
virtual block device.
During a reconnection event for an already mapped device, in case the
rtrs_server module queue_depth has changed, fail the reconnect attempt.
Also stop further auto reconnection attempts. A manual reconnect via
sysfs has to be triggerred.
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20210528113018.52290-20-jinpu.wang@ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2371c40354509746e4a4dad09a752e027a30f148 ]
When closing a session, currently the rtrs_srv_stats object in the
closing session is freed by kobject release. But if it failed
to create a session by various reasons, it must free the rtrs_srv_stats
object directly because kobject is not created yet.
This problem is found by kmemleak as below:
1. One client machine maps /dev/nullb0 with session name 'bla':
root@test1:~# echo "sessname=bla path=ip:192.168.122.190 \
device_path=/dev/nullb0" > /sys/devices/virtual/rnbd-client/ctl/map_device
2. Another machine failed to create a session with the same name 'bla':
root@test2:~# echo "sessname=bla path=ip:192.168.122.190 \
device_path=/dev/nullb1" > /sys/devices/virtual/rnbd-client/ctl/map_device
-bash: echo: write error: Connection reset by peer
3. The kmemleak on server machine reported an error:
unreferenced object 0xffff888033cdc800 (size 128):
comm "kworker/2:1", pid 83, jiffies 4295086585 (age 2508.680s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000a72903b2>] __alloc_sess+0x1d4/0x1250 [rtrs_server]
[<00000000d1e5321e>] rtrs_srv_rdma_cm_handler+0xc31/0xde0 [rtrs_server]
[<00000000bb2f6e7e>] cma_ib_req_handler+0xdc5/0x2b50 [rdma_cm]
[<00000000e896235d>] cm_process_work+0x2d/0x100 [ib_cm]
[<00000000b6866c5f>] cm_req_handler+0x11bc/0x1c40 [ib_cm]
[<000000005f5dd9aa>] cm_work_handler+0xe65/0x3cf2 [ib_cm]
[<00000000610151e7>] process_one_work+0x4bc/0x980
[<00000000541e0f77>] worker_thread+0x78/0x5c0
[<00000000423898ca>] kthread+0x191/0x1e0
[<000000005a24b239>] ret_from_fork+0x3a/0x50
Fixes: 39c2d639ca ("RDMA/rtrs-srv: Set .release function for rtrs srv device during device init")
Link: https://lore.kernel.org/r/20210528113018.52290-18-jinpu.wang@ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64bce1ee978491a779eb31098b21c57d4e431d6a ]
When re-connecting, it resets hb_missed_max to 0.
Before the first re-connecting, client will trigger re-connection
when it gets hb-ack more than 5 times. But after the first
re-connecting, clients will do re-connection whenever it does
not get hb-ack because hb_missed_max is 0.
There is no need to reset hb_missed_max when re-connecting.
hb_missed_max should be kept until closing the session.
Fixes: c0894b3ea6 ("RDMA/rtrs: core: lib functions shared between client and server modules")
Link: https://lore.kernel.org/r/20210528113018.52290-16-jinpu.wang@ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41db63a7efe1c8c2dd282c1849a6ebfbbedbaf67 ]
When get_next_path_min_inflight is called to select the next path, it
iterates over the list of available rtrs_clt_sess (paths). It then reads
the number of inflight IOs for that path to select one which has the least
inflight IO.
But it may so happen that rtrs_clt_sess (path) is no longer in the
connected state because closing or error recovery paths can change the status
of the rtrs_clt_Sess.
For example, the client sent the heart-beat and did not get the
response, it would change the session status and stop IO processing.
The added checking of this patch can prevent accessing the broken path
and generating duplicated error messages.
It is ok if the status is changed after checking the status because
the error recovery path does not free memory and only tries to
reconnection. And also it is ok if the session is closed after checking
the status because closing the session changes the session status and
flush all IO beforing free memory. If the session is being accessed for
IO processing, the closing session will wait.
Fixes: 6a98d71dae ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/20210528113018.52290-13-jinpu.wang@ionos.com
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ec2e27a3afff64c96bfe7a77685c33619db84be ]
Only allocate a memory registration list if it will be used and if it will
be freed.
Link: https://lore.kernel.org/r/20210524041211.9480-5-bvanassche@acm.org
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Fixes: f273ad4f8d ("RDMA/srp: Remove support for FMR memory registration")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a4d8e96e4fd687af92b961d5cdcea0fdbde05fe ]
For outgoing subflow join, when recv SYNACK, in subflow_finish_connect(),
the mptcp_finish_join() may return false in some cases, and send a RESET
to remote, and no local hmac is required.
So generate subflow hmac after mptcp_finish_join().
Fixes: ec3edaa7ca ("mptcp: Add handling of outgoing MP_JOIN requests")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f1af441fd5dd5caf0807bb19ce9bbf9325ce534 ]
After commit 2c5ebd001d ("mptcp: refactor token container"),
pr_debug() is called before mptcp_crypto_key_gen_sha() in
mptcp_token_new_connect(), so the output local_key, token and
idsn are 0, like:
MPTCP: ssk=00000000f6b3c4a2, local_key=0, token=0, idsn=0
Move pr_debug() after mptcp_crypto_key_gen_sha().
Fixes: 2c5ebd001d ("mptcp: refactor token container")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce0cb93a5adb283f577cd4661f511047b5e39028 ]
The variable bit_per_pix is a u8 and is promoted in the multiplication
to an int type and then sign extended to a u64. If the result of the
int multiplication is greater than 0x7fffffff then the upper 32 bits will
be set to 1 as a result of the sign extension. Avoid this by casting
tu_size_reg to u64 to avoid sign extension and also a potential overflow.
Fixes: 1a0f7ed3ab ("drm/rockchip: cdn-dp: add cdn DP support for rk3399")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915162049.36434-1-colin.king@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3dfa159f6b0c054eb63673fbf643a5f2cc862e63 ]
'ret' is know to be 0 a this point. Checking the return value of
'phy_init()' and 'phy_set_mode()' was intended instead.
So add the missing assignments.
Fixes: cca1705c3d ("drm/rockchip: lvds: Add PX30 support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/248220d4815dc8c8088cebfab7d6df5f70518438.1619881852.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43c2de1002d2b70fb5941fa14e97a34e3dc214d4 ]
When we first enable the DSI encoder, we currently program some per-chip
configuration that we look up in rk3399_chip_data based on the device
tree compatible we match. This data configures various parameters of the
MIPI lanes, including on RK3399 whether DSI1 is slaved to DSI0 in a
dual-mode configuration. It also selects which LCDC (i.e. VOP) to scan
out from.
This causes a problem in RK3399 dual-mode configurations, though: panel
prepare() callbacks run before the encoder gets enabled and expect to be
able to write commands to the DSI bus, but the bus isn't fully
functional until the lane and master/slave configuration have been
programmed. As a result, dual-mode panels (and possibly others too) fail
to turn on when the rockchipdrm driver is initially loaded.
Because the LCDC mux is the only thing we don't know until enable time
(and is the only thing that can ever change), we can actually move most
of the initialization to bind() and get it out of the way early. That's
what this change does. (Rockchip's 4.4 BSP kernel does it in mode_set(),
which also avoids the issue, but bind() seems like the more correct
place to me.)
Tested on a Google Scarlet board (Acer Chromebook Tab 10), which has a
Kingdisplay KD097D04 dual-mode panel. Prior to this change, the panel's
backlight would turn on but no image would appear when initially loading
rockchipdrm. If I kept rockchipdrm loaded and reloaded the panel driver,
it would come on. With this change, the panel successfully turns on
during initial rockchipdrm load as expected.
Fixes: 2d4f7bdafd ("drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver")
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Tested-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/55fe7f3454d8c91dc3837ba5aa741d4a0e67378f.1618797813.git.tommyhebb@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae41d925c75b53798f289c69ee8d9f7d36432f6d ]
After calling clk_prepare_enable(), clk_disable_unprepare() need
be called when calling regmap_write() failed.
Fixes: 1a0f7ed3ab ("drm/rockchip: cdn-dp: add cdn DP support for rk3399")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519134928.2696617-1-yangyingliang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 046e0db975695540c9d9898cdbf0b60533d28afb ]
alpha_en should be set to 0 if it is not used, i.e. to disable alpha
blending if it was enabled before and should be disabled now.
Fixes: 2aae8ed1f3 ("drm/rockchip: Add per-pixel alpha support for the PX30 VOP")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210528130554.72191-6-knaerzche@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 52af13a41489d7bbc1932d17583eff6e5fffc820 ]
The variables will be free on path err_phy_connect, it should
return error code, or it will cause double free when calling
ftgmac100_remove().
Fixes: bd466c3fb5 ("net/faraday: Support NCSI mode")
Fixes: 39bfab8844 ("net: ftgmac100: Add support for DT phy-handle property")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc794f8c56abddf709f1f84fcb2a3c9e7d9cc9b4 ]
While some SoC samples are able to lock with a PLL factor of 55, others
samples can't. ATM, a minimum of 60 appears to work on all the samples
I have tried.
Even with 60, it sometimes takes a long time for the PLL to eventually
lock. The documentation says that the minimum rate of these PLLs DCO
should be 3GHz, a factor of 125. Let's use that to be on the safe side.
With factor range changed, the PLL seems to lock quickly (enough) so far.
It is still unclear if the range was the only reason for the delay.
Fixes: 085a4ea93d ("clk: meson: g12a: add peripheral clock controller")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210429090325.60970-1-jbrunet@baylibre.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a49e72b3bda73d36664a084e47da9727a31b8095 ]
Fix to return a negative error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: c6e08d6251 ("net: qrtr: Allocate workqueue before kernel_bind")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88509f698c4e38e287e016e86a0445547824135c ]
In cases where the dirty linear memory range spans multiple sample sheets
in a surface, the dirty surface region is incorrectly computed.
To do this correctly and in an optimized fashion we would have to compute
the dirty region of each sample sheet and compute the union of those
regions.
But assuming that cpu writing to a multisample surface is rather a corner
case than a common case, just set the dirty region to the full surface.
This fixes OpenGL piglit errors with SVGA_FORCE_COHERENT=1
and the piglit test:
fbo-depthstencil blit default_fb -samples=2 -auto
Fixes: 9ca7d19ff8 ("drm/vmwgfx: Add surface dirty-tracking callbacks")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210505035740.286923-4-zackr@vmware.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75156a887b6cea6e09d83ec19f4ebfd7c86265f0 ]
The SVGA3dCmdDXGenMips command uses a shader-resource view to access
the underlying surface. Normally accesses using that view-type are not
dirtying the underlying surface, but that particular command is an
exception.
Mark the surface gpu-dirty after a SVGA3dCmdDXGenMips command has been
submitted.
This fixes the piglit getteximage-formats test run with
SVGA_FORCE_COHERENT=1
Fixes: a9f58c456e ("drm/vmwgfx: Be more restrictive when dirtying resources")
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Charmaine Lee <charmainel@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210505035740.286923-3-zackr@vmware.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
