[ Upstream commit 97387c2f06bcfd79d04a848d35517b32ee6dca7c ]
Valid Maxim Integrated ACPI device IDs would start with MXIM,
not with MAX1. On top of that, ACPI device IDs reflecting chip names
are almost always invalid.
Remove the invalid ACPI IDs.
Fixes: 04e1e70afe ("hwmon: (max31722) Add support for MAX31722/MAX31723 temperature sensors")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac61c8aae446b9c0fe18981fe721d4a43e283ad6 ]
This reverts commit b58bd4c6df.
None of the ACPI IDs introduced with the reverted patch is a valid ACPI
device ID. Any ACPI users of this driver are advised to use PRP0001 and
a devicetree-compatible device identification.
Fixes: b58bd4c6df ("hwmon: (lm70) Add support for ACPI")
Cc: Andrej Picej <andpicej@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e09d75513d2670b7ab91ab3584fc5bcf2675a75 ]
Use the more modern API to get the match data out of the of match table.
This saves some code, lines, and nicely avoids referencing the match
table when it is undefined with configurations where CONFIG_OF=n.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: <linux-hwmon@vger.kernel.org>
[robh: rework to use device_get_match_data()]
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d11e6aad1811ea293ee2996cec9124f7fccb661 ]
The m2m_ctx resources was allocated by v4l2_m2m_ctx_init() in g2d_open()
should be freed from g2d_release() when it's not used.
Fix it
Fixes: 918847341a ("[media] v4l: add G2D driver for s5p device family")
Signed-off-by: Dillon Min <dillon.minfei@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 765ba251d2522e2a0daa2f0793fd0f0ce34816ec ]
Converting the VIDIOC_DQEVENT_TIME32/VIDIOC_DQEVENT32/
VIDIOC_DQEVENT32_TIME32 arguments to the canonical form is done in common
code, but for some reason I ended up adding another conversion helper to
subdev_do_ioctl() as well. I must have concluded that this does not go
through the common conversion, but it has done that since the ioctl
handler was first added.
I assume this one is harmless as there should be no way to arrive here
from user space if CONFIG_COMPAT_32BIT_TIME is set, but since it is dead
code, it should just get removed.
On a 64-bit architecture, as well as a 32-bit architecture without
CONFIG_COMPAT_32BIT_TIME, handling this command is a mistake,
and the kernel should return an error.
Fixes: 1a6c0b36dd ("media: v4l2-core: fix VIDIOC_DQEVENT for time64 ABI")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9163f01130304fab1f74683d7d44632da7bda637 ]
When using CONFIG_ARM64_SW_TTBR0_PAN, a task's thread_info::ttbr0 must be
the TTBR0_EL1 value used to run userspace. With 52-bit PAs, the PA must be
packed into the TTBR using phys_to_ttbr(), but we forget to do this in some
of the SW PAN code. Thus, if the value is installed into TTBR0_EL1 (as may
happen in the uaccess routines), this could result in UNPREDICTABLE
behaviour.
Since hardware with 52-bit PA support almost certainly has HW PAN, which
will be used in preference, this shouldn't be a practical issue, but let's
fix this for consistency.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Fixes: 529c4b05a3 ("arm64: handle 52-bit addresses in TTBR")
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/1623749578-11231-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 833be850f1cabd0e3b5337c0fcab20a6e936dd48 ]
Depending on configuration options and specific code paths, we either
use the empty_zero_page or the configuration-dependent reserved_ttbr0
as a reserved value for TTBR{0,1}_EL1.
To simplify this code, let's always allocate and use the same
reserved_pg_dir, replacing reserved_ttbr0. Note that this is allocated
(and hence pre-zeroed), and is also marked as read-only in the kernel
Image mapping.
Keeping this separate from the empty_zero_page potentially helps with
robustness as the empty_zero_page is used in a number of cases where a
failure to map it read-only could allow it to become corrupted.
The (presently unused) swapper_pg_end symbol is also removed, and
comments are added wherever we rely on the offsets between the
pre-allocated pg_dirs to keep these cases easily identifiable.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201103102229.8542-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f9ae69e5267f53e89e296fccee291975a85f0eb ]
Fix to return a negative error code from the error handling case instead
of 0, as done elsewhere in this function.
Fixes: 75fa9ea6e3 ("mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210508020321.1677-1-thunder.leizhen@huawei.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5cd259ca5d466f65ffd21e2e2fa00fb648a8c555 ]
SM2 module alloc ec->Q in sm2_set_pub_key(), when doing alg test in
test_akcipher_one(), it will set public key for every test vector,
and don't free ec->Q. This will cause a memory leak.
This patch alloc ec->Q in sm2_ec_ctx_init().
Fixes: ea7ecb6644 ("crypto: sm2 - introduce OSCCA SM2 asymmetric cipher algorithm")
Signed-off-by: Hongbo Li <herberthbli@tencent.com>
Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bc608b4655b8b1491fb100f4cf4f15ae64a8698 ]
This is an algorithm optimization. The reset operation when
setting the public key is repeated and redundant, so remove it.
At the same time, `sm2_ecc_os2ec()` is optimized to make the
function more simpler and more in line with the Linux code style.
Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b82435d17774f3eaab35dce239d354548aa9da2 ]
In curve25519_mod_init() the curve25519_alg will be registered only when
(X86_FEATURE_BMI2 && X86_FEATURE_ADX). But in curve25519_mod_exit()
it still checks (X86_FEATURE_BMI2 || X86_FEATURE_ADX) when do crypto
unregister. This will trigger a BUG_ON in crypto_unregister_alg() as
alg->cra_refcnt is 0 if the cpu only supports one of X86_FEATURE_BMI2
and X86_FEATURE_ADX.
Fixes: 07b586fe06 ("crypto: x86/curve25519 - replace with formally verified implementation")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ca323b2c61ec321eb9f2179a405b9c34cdb4f553 ]
pm_runtime_get_sync will increment pm usage counter
even it failed. Forgetting to putting operation will
result in reference leak here. We fix it by replacing
it with pm_runtime_resume_and_get to keep usage counter
balanced.
Fixes: 604c31039d ("crypto: omap-sham - Check for return value from pm_runtime_get_sync")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57c126661f50b884d3812e7db6e00f2e778eccfb ]
Function nitrox_register_interrupts leaves variable 'nr_vecs' unchecked, which
would be use as kcalloc parameter later.
Fixes: 5155e118dd ("crypto: cavium/nitrox - use pci_alloc_irq_vectors() while enabling MSI-X.")
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e11737a772b95c6587df73f216eec1762431432 ]
According to the datasheet:
REGISTER DETAILS − 0x02 BUCK, BUCK_OUT is BIT0 ~ BIT7.
So vsel_mask for FAN53880_BUCK should be 0xFF.
Fixes: e6dea51e2d ("regulator: fan53880: Add initial support")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210607142907.1599905-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 13dfead49db07225335d4f587a560a2210391a1a ]
Rename struct sms_msg_data4 to sms_msg_data5 and increase the size of
its msg_data array from 4 to 5 elements. Notice that at some point
the 5th element of msg_data is being accessed in function
smscore_load_firmware_family2():
1006 trigger_msg->msg_data[4] = 4; /* Task ID */
Also, there is no need for the object _trigger_msg_ of type struct
sms_msg_data *, when _msg_ can be used, directly. Notice that msg_data
in struct sms_msg_data is a one-element array, which causes multiple
out-of-bounds warnings when accessing beyond its first element
in function smscore_load_firmware_family2():
992 struct sms_msg_data *trigger_msg =
993 (struct sms_msg_data *) msg;
994
995 pr_debug("sending MSG_SMS_SWDOWNLOAD_TRIGGER_REQ\n");
996 SMS_INIT_MSG(&msg->x_msg_header,
997 MSG_SMS_SWDOWNLOAD_TRIGGER_REQ,
998 sizeof(struct sms_msg_hdr) +
999 sizeof(u32) * 5);
1000
1001 trigger_msg->msg_data[0] = firmware->start_address;
1002 /* Entry point */
1003 trigger_msg->msg_data[1] = 6; /* Priority */
1004 trigger_msg->msg_data[2] = 0x200; /* Stack size */
1005 trigger_msg->msg_data[3] = 0; /* Parameter */
1006 trigger_msg->msg_data[4] = 4; /* Task ID */
even when enough dynamic memory is allocated for _msg_:
929 /* PAGE_SIZE buffer shall be enough and dma aligned */
930 msg = kmalloc(PAGE_SIZE, GFP_KERNEL | coredev->gfp_buf_flags);
but as _msg_ is casted to (struct sms_msg_data *):
992 struct sms_msg_data *trigger_msg =
993 (struct sms_msg_data *) msg;
the out-of-bounds warnings are actually valid and should be addressed.
Fix this by declaring object _msg_ of type struct sms_msg_data5 *,
which contains a 5-elements array, instead of just 4. And use
_msg_ directly, instead of creating object trigger_msg.
This helps with the ongoing efforts to enable -Warray-bounds by fixing
the following warnings:
CC [M] drivers/media/common/siano/smscoreapi.o
drivers/media/common/siano/smscoreapi.c: In function ‘smscore_load_firmware_family2’:
drivers/media/common/siano/smscoreapi.c:1003:24: warning: array subscript 1 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
1003 | trigger_msg->msg_data[1] = 6; /* Priority */
| ~~~~~~~~~~~~~~~~~~~~~^~~
In file included from drivers/media/common/siano/smscoreapi.c:12:
drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’
619 | u32 msg_data[1];
| ^~~~~~~~
drivers/media/common/siano/smscoreapi.c:1004:24: warning: array subscript 2 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
1004 | trigger_msg->msg_data[2] = 0x200; /* Stack size */
| ~~~~~~~~~~~~~~~~~~~~~^~~
In file included from drivers/media/common/siano/smscoreapi.c:12:
drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’
619 | u32 msg_data[1];
| ^~~~~~~~
drivers/media/common/siano/smscoreapi.c:1005:24: warning: array subscript 3 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
1005 | trigger_msg->msg_data[3] = 0; /* Parameter */
| ~~~~~~~~~~~~~~~~~~~~~^~~
In file included from drivers/media/common/siano/smscoreapi.c:12:
drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’
619 | u32 msg_data[1];
| ^~~~~~~~
drivers/media/common/siano/smscoreapi.c:1006:24: warning: array subscript 4 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
1006 | trigger_msg->msg_data[4] = 4; /* Task ID */
| ~~~~~~~~~~~~~~~~~~~~~^~~
In file included from drivers/media/common/siano/smscoreapi.c:12:
drivers/media/common/siano/smscoreapi.h:619:6: note: while referencing ‘msg_data’
619 | u32 msg_data[1];
| ^~~~~~~~
Fixes: 018b0c6f8a ("[media] siano: make load firmware logic to work with newer firmwares")
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ed339f23d41e21660a389adf2e7b2966d457ff6 ]
The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.
Control transfers without a data stage are treated as OUT requests by
the USB stack and should be using usb_sndctrlpipe(). Failing to do so
will now trigger a warning.
Fix the gl860_RTx() helper so that zero-length control reads fail with
an error message instead. Note that there are no current callers that
would trigger this.
Fixes: 4f7cb8837c ("V4L/DVB (12954): gspca - gl860: Addition of GL860 based webcams")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6b1e7093f0a099571fc8836ab4a589633f956a8 ]
When the CSI bps per lane is not in the valid range, an appropriate error
code -EINVAL should be returned. However, we currently do not explicitly
assign this error code to 'ret'. As a result, 0 was incorrectly returned.
Fixes: 2561482468 ("[media] tc358743: support probe from device tree")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f2e452730d2bcd59fe05246f0e19a4c52e0012d ]
The media_device_usb_allocate() function returns error pointers when
it's enabled and something goes wrong. It can return NULL as well, but
only if CONFIG_MEDIA_CONTROLLER is disabled so that doesn't apply here.
Fixes: 812658d88d ("media: change au0828 to use Media Device Allocator API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01fe904c9afd26e79c1f73aa0ca2e3d785e5e319 ]
In isp_video_release, file->private_data is freed via
_vb2_fop_release()->v4l2_fh_release(). But the freed
file->private_data is still used in v4l2_fh_is_singular_file()
->v4l2_fh_is_singular(file->private_data), which is a use
after free bug.
My patch uses a variable 'is_singular_file' to avoid the uaf.
v3: https://lore.kernel.org/patchwork/patch/1419058/
Fixes: 34947b8aeb ("[media] exynos4-is: Add the FIMC-IS ISP capture DMA driver")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba1ed4ae760a81caf39f54232e089d95157a0dba ]
The driver should only set the payload on .buf_prepare if the
buffer is CAPTURE type. If an OUTPUT buffer has a zero bytesused
set by userspace then v4l2-core will set it to buffer length.
If we overwrite bytesused for OUTPUT buffers, too, then
vb2_get_plane_payload() will return incorrect value which might be then
written to hw registers by the driver in rkvdec-h264.c.
[Changed the comment and used V4L2_TYPE_IS_CAPTURE macro]
Fixes: cd33c83044 ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8e00abe7d9fe21dd13609e2e3a707e38902b105 ]
Some arches (um, sparc64, riscv, xtensa) cause a Kconfig warning for
LOCKDEP.
These arch-es select LOCKDEP_SUPPORT but they are not listed as one
of the arch-es that LOCKDEP depends on.
Since (16) arch-es define the Kconfig symbol LOCKDEP_SUPPORT if they
intend to have LOCKDEP support, replace the awkward list of
arch-es that LOCKDEP depends on with the LOCKDEP_SUPPORT symbol.
But wait. LOCKDEP_SUPPORT is included in LOCK_DEBUGGING_SUPPORT,
which is already a dependency here, so LOCKDEP_SUPPORT is redundant
and not needed.
That leaves the FRAME_POINTER dependency, but it is part of an
expression like this:
depends on (A && B) && (FRAME_POINTER || B')
where B' is a dependency of B so if B is true then B' is true
and the value of FRAME_POINTER does not matter.
Thus we can also delete the FRAME_POINTER dependency.
Fixes this kconfig warning: (for um, sparc64, riscv, xtensa)
WARNING: unmet direct dependencies detected for LOCKDEP
Depends on [n]: DEBUG_KERNEL [=y] && LOCK_DEBUGGING_SUPPORT [=y] && (FRAME_POINTER [=n] || MIPS || PPC || S390 || MICROBLAZE || ARM || ARC || X86)
Selected by [y]:
- PROVE_LOCKING [=y] && DEBUG_KERNEL [=y] && LOCK_DEBUGGING_SUPPORT [=y]
- LOCK_STAT [=y] && DEBUG_KERNEL [=y] && LOCK_DEBUGGING_SUPPORT [=y]
- DEBUG_LOCK_ALLOC [=y] && DEBUG_KERNEL [=y] && LOCK_DEBUGGING_SUPPORT [=y]
Fixes: 7d37cb2c912d ("lib: fix kconfig dependency on ARCH_WANT_FRAME_POINTERS")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lkml.kernel.org/r/20210524224150.8009-1-rdunlap@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c8121262484d99bffb598f39a0df445cecd8efb ]
The driver overrides the error codes returned by platform_get_irq() to
-ENXIO, so if it returns -EPROBE_DEFER, the driver would fail the probe
permanently instead of the deferred probing. Propagate the error code
upstream, as it should have been done from the start...
Fixes: 2fff275126 ("PATA host controller driver for ep93xx")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Link: https://lore.kernel.org/r/509fda88-2e0d-2cc7-f411-695d7e94b136@omprussia.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c87ae1a0dbeb5794957421157fd266d38a869b4 ]
'ret' is known to be 1 here. In fact 'i' is expected instead.
Store the return value of 'i2c_master_recv()' in 'ret' so that the error
message print the correct error code.
Fixes: acaa34bf06 ("media: rc: implement zilog transmitter")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6f8e68e238a15bb15f1726b35c695136c64eaba ]
If an error occurs after calling 'sp_get_irqs()', 'sp_free_irqs()' must be
called as already done in the error handling path.
Fixes: f4d18d656f ("crypto: ccp - Abstract interrupt registeration")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: John Allen <john.allen@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c8552325e013cbdabc443cd1f1b4d03c4a2e64e ]
The pm_runtime APIs added first in commit 7694b6ca64 ("crypto: sa2ul -
Add crypto driver") are not unwound properly and was fixed up partially
in commit 13343badae09 ("crypto: sa2ul - Fix PM reference leak in
sa_ul_probe()"). This fixed up the pm_runtime usage count but not the
state. Fix this properly.
Fixes: 13343badae09 ("crypto: sa2ul - Fix PM reference leak in sa_ul_probe()")
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c0716ee1d973f6504d13f0e8d4d10350c85ad37 ]
The sa_dma_init() function doesn't release the requested dma channels
on all failure paths. Any failure in this function also ends up
leaking the dma pool created in sa_init_mem() in the sa_ul_probe()
function. Fix all of these issues.
Fixes: 7694b6ca64 ("crypto: sa2ul - Add crypto driver")
Signed-off-by: Suman Anna <s-anna@ti.com>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d06aca989c243dd9e5d3e20aa4e5c2ecfdd07050 ]
Replace BIT() in x86's UAPI header with _BITUL(). BIT() is not defined
in the UAPI headers and its usage may cause userspace build errors.
Fixes: 742c45c3ec ("x86/elf: Enumerate kernel FSGSBASE capability in AT_HWCAP2")
Signed-off-by: Joe Richey <joerichey@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210521085849.37676-2-joerichey94@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49219d9b8785ba712575c40e48ce0f7461254626 ]
EVM_SETUP_COMPLETE is defined as 0x80000000, which is larger than INT_MAX.
The "-fno-strict-overflow" compiler option properly prevents signaling
EVM that the EVM policy setup is complete. Define and read an unsigned
int.
Fixes: f00d797507 ("EVM: Allow userspace to signal an RSA key has been loaded")
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bfc1f378c8953e68ccdbfe0a8c20748427488b80 ]
Iff platform_get_irq() fails (or returns IRQ0) and thus the polling mode
has to be used, ata_host_activate() hits the WARN_ON() due to 'irq_handler'
parameter being non-NULL if the polling mode is selected. Let's only set
the pointer to the driver's IRQ handler if platform_get_irq() returns a
valid IRQ # -- this should avoid the unnecessary WARN_ON()...
Fixes: 43f01da0f2 ("MIPS/OCTEON/ata: Convert pata_octeon_cf.c to use device tree.")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/3a241167-f84d-1d25-5b9b-be910afbe666@omp.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8852c552402979508fdc395ae07aa8761aa46045 ]
"OBJECT_FILES_NON_STANDARD_vma.o := n" has a dependency bug. When
objtool source is updated, the affected object doesn't get re-analyzed
by objtool.
Peter's new variable-sized jump label feature relies on objtool
rewriting the object file. Otherwise the system can fail to boot. That
effectively upgrades this minor dependency issue to a major bug.
The problem is that variables in prerequisites are expanded early,
during the read-in phase. The '$(objtool_dep)' variable indirectly uses
'$@', which isn't yet available when the target prerequisites are
evaluated.
Use '.SECONDEXPANSION:' which causes '$(objtool_dep)' to be expanded in
a later phase, after the target-specific '$@' variable has been defined.
Fixes: b9ab5ebb14 ("objtool: Add CONFIG_STACK_VALIDATION option")
Fixes: ab3257042c26 ("jump_label, x86: Allow short NOPs")
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93b73858701fd01de26a4a874eb95f9b7156fd4b ]
cpu_cgroup_css_online() calls cpu_util_update_eff() without holding the
uclamp_mutex or rcu_read_lock() like other call sites, which is
a mistake.
The uclamp_mutex is required to protect against concurrent reads and
writes that could update the cgroup hierarchy.
The rcu_read_lock() is required to traverse the cgroup data structures
in cpu_util_update_eff().
Surround the caller with the required locks and add some asserts to
better document the dependency in cpu_util_update_eff().
Fixes: 7226017ad3 ("sched/uclamp: Fix a bug in propagating uclamp value in new cgroups")
Reported-by: Quentin Perret <qperret@google.com>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210510145032.1934078-3-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c18f2ecfcc274a4bcc1d122f79ebd4001c3b445 ]
cpu.uclamp.min is a protection as described in cgroup-v2 Resource
Distribution Model
Documentation/admin-guide/cgroup-v2.rst
which means we try our best to preserve the minimum performance point of
tasks in this group. See full description of cpu.uclamp.min in the
cgroup-v2.rst.
But the current implementation makes it a limit, which is not what was
intended.
For example:
tg->cpu.uclamp.min = 20%
p0->uclamp[UCLAMP_MIN] = 0
p1->uclamp[UCLAMP_MIN] = 50%
Previous Behavior (limit):
p0->effective_uclamp = 0
p1->effective_uclamp = 20%
New Behavior (Protection):
p0->effective_uclamp = 20%
p1->effective_uclamp = 50%
Which is inline with how protections should work.
With this change the cgroup and per-task behaviors are the same, as
expected.
Additionally, we remove the confusing relationship between cgroup and
!user_defined flag.
We don't want for example RT tasks that are boosted by default to max to
change their boost value when they attach to a cgroup. If a cgroup wants
to limit the max performance point of tasks attached to it, then
cpu.uclamp.max must be set accordingly.
Or if they want to set different boost value based on cgroup, then
sysctl_sched_util_clamp_min_rt_default must be used to NOT boost to max
and set the right cpu.uclamp.min for each group to let the RT tasks
obtain the desired boost value when attached to that group.
As it stands the dependency on !user_defined flag adds an extra layer of
complexity that is not required now cpu.uclamp.min behaves properly as
a protection.
The propagation model of effective cpu.uclamp.min in child cgroups as
implemented by cpu_util_update_eff() is still correct. The parent
protection sets an upper limit of what the child cgroups will
effectively get.
Fixes: 3eac870a32 (sched/uclamp: Use TG's clamps to restrict TASK's clamps)
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210510145032.1934078-2-qais.yousef@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8edcb5049ac29aa3c8acc5ef15dd4036543d747e ]
The use of an enum named 'RST' conflicts with a #define macro
named 'RST' in arch/mips/include/asm/mach-rc32434/rb.h.
The MIPS use of RST was there first (AFAICT), so change the
media/i2c/ uses of RST to be named 'RSET'.
'git grep -w RSET' does not report any naming conflicts with the
new name.
This fixes multiple build errors:
arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token
15 | #define RST (1 << 15)
| ^
drivers/media/i2c/s5c73m3/s5c73m3.h:356:2: note: in expansion of macro 'RST'
356 | RST,
| ^~~
../arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token
15 | #define RST (1 << 15)
| ^
../drivers/media/i2c/s5k6aa.c:180:2: note: in expansion of macro 'RST'
180 | RST,
| ^~~
../arch/mips/include/asm/mach-rc32434/rb.h:15:14: error: expected identifier before '(' token
15 | #define RST (1 << 15)
| ^
../drivers/media/i2c/s5k5baf.c:238:2: note: in expansion of macro 'RST'
238 | RST,
| ^~~
and some others that I have trimmed.
Fixes: cac47f1822 ("[media] V4L: Add S5C73M3 camera driver")
Fixes: 8b99312b72 ("[media] Add v4l2 subdev driver for S5K4ECGX sensor")
Fixes: 7d459937dc ("[media] Add driver for Samsung S5K5BAF camera sensor")
Fixes: bfa8dd3a05 ("[media] v4l: Add v4l2 subdev driver for S5K6AAFX sensor")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Sangwook Lee <sangwook.lee@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d3a62fbae8e5badc2342388f65ab2191c209cc0 ]
The driver overrides the error codes returned by platform_get_irq() to
-ENOENT, so if it returns -EPROBE_DEFER, the driver would fail the probe
permanently instead of the deferred probing. Switch to propagating the
error code upstream, still checking/overriding IRQ0 as libata regards it
as "no IRQ" (thus polling) anyway...
Fixes: 9ec36cafe4 ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Link: https://lore.kernel.org/r/771ced55-3efb-21f5-f21c-b99920aae611@omprussia.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a24efa16e7db02306fb5db84518bb0a7ada5a46 ]
The driver overrides the error codes returned by platform_get_irq() to
-EINVAL, so if it returns -EPROBE_DEFER, the driver would fail the probe
permanently instead of the deferred probing. Switch to propagating the
error code upstream, still checking/overriding IRQ0 as libata regards it
as "no IRQ" (thus polling) anyway...
Fixes: 9ec36cafe4 ("of/irq: do irq resolution in platform_get_irq")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Link: https://lore.kernel.org/r/105b456d-1199-f6e9-ceb7-ffc5ba551d1a@omprussia.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b01360384009ab066940b45f34880991ea7ccbfb ]
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 8a63b1994c ("crypto: ux500 - Add driver for HASH hardware")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8acf011f2e7e21a7e2fae47cbaa06598e533d40 ]
Crypto selftests fail on ixp4xx since it do not update IV after skcipher
requests.
Fixes: 81bef01500 ("crypto: ixp4xx - Hardware crypto support for IXP4xx CPUs")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9395c58fdddd79cdd3882132cdd04e8ac7ad525f ]
Testing ixp4xx_crypto with CONFIG_DMA_API_DEBUG lead to the following error:
DMA-API: platform ixp4xx_crypto.0: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=24 bytes]
This is due to dma_unmap using the wrong address.
Fixes: 0d44dc59b2 ("crypto: ixp4xx - Fix handling of chained sg buffers")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 892bb6ecead9b834ba7ad1d07513e9eba1baa3a4 ]
The device_run() first enables the clock and then
tries to resume PM runtime, checking for errors.
Well, if for some reason the pm_runtime can not resume,
it would be better to detect it beforehand.
So, change the order inside device_run().
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Fixes: 775fec6900 ("media: add Rockchip VPU JPEG encoder driver")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 747bad54a677d8633ec14b39dfbeb859c821d7f2 ]
There's a bug at s5p_cec_adap_enable(): if called to
disable the device, it should call pm_runtime_put()
instead of pm_runtime_disable(), as the goal here is to
decrement the usage_count and not to disable PM runtime.
Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes: 1bcbf6f4b6 ("[media] cec: s5p-cec: Add s5p-cec driver")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cba5473c5ce0f1389d316c5dc6f83a0259df5eb ]
The Venus code has a sort of watchdog that attempts to recover
from IP errors, implemented as a delayed work job, which
calls venus_sys_error_handler().
Right now, it has several issues:
1. It assumes that PM runtime resume never fails
2. It internally runs two while() loops that also assume that
PM runtime will never fail to go idle:
while (pm_runtime_active(core->dev_dec) || pm_runtime_active(core->dev_enc))
msleep(10);
...
while (core->pmdomains[0] && pm_runtime_active(core->pmdomains[0]))
usleep_range(1000, 1500);
3. It uses an OR to merge all return codes and then report to the user
4. If the hardware never recovers, it keeps running on every 10ms,
flooding the syslog with 2 messages (so, up to 200 messages
per second).
Rework the code, in order to prevent that, by:
1. check the return code from PM runtime resume;
2. don't let the while() loops run forever;
3. store the failed event;
4. use warn ratelimited when it fails to recover.
Fixes: af2c3834c8 ("[media] media: venus: adding core part and helper functions")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f60d7270c8a3d2beb1c23ae0da42497afa3584c2 ]
ffz(), that has been used to count unused native CSs,
might cause undefined behaviour when called against ~0U.
To fix that, open code it with ffs(~value) - 1.
Fixes: 7d93aecdb5 ("spi: Add generic support for unused native cs with cs-gpios")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210420164425.40287-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dbaca8e56ea3f23fa215f48c2d46dd03ede06e02 ]
The commit 7d93aecdb5 ("spi: Add generic support for unused native cs
with cs-gpios") excludes the valid case for the controllers that doesn't
need to switch native CS in order to perform the transfer, i.e. when
0 native
... ...
<n> - 1 native
<n> GPIO
<n> + 1 GPIO
... ...
where <n> defines maximum of native CSs supported by the controller.
To allow this, bail out from spi_get_gpio_descs() conditionally for
the controllers which explicitly marked with SPI_MASTER_GPIO_SS.
Fixes: 7d93aecdb5 ("spi: Add generic support for unused native cs with cs-gpios")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210420164425.40287-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8826ee4fe75051f8cbfa5d4a9aa70565938e724c ]
isw_nr_in_flight is used to determine whether the inode switch queue
should be flushed from the umount path. Currently it's increased after
grabbing an inode and even scheduling the switch work. It means the
umount path can walk past cleanup_offline_cgwb() with active inode
references, which can result in a "Busy inodes after unmount." message and
use-after-free issues (with inode->i_sb which gets freed).
Fix it by incrementing isw_nr_in_flight before doing anything with the
inode and decrementing in the case when switching wasn't scheduled.
The problem hasn't yet been seen in the real life and was discovered by
Jan Kara by looking into the code.
Link: https://lkml.kernel.org/r/20210608230225.2078447-4-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Suggested-by: Jan Kara <jack@suse.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5f320ff8a79501bb59338278336ec43acb9d7e2 ]
gcc points out a mistake in the mca driver that goes back to before the
git history:
arch/ia64/kernel/mca_drv.c: In function 'init_record_index_pools':
arch/ia64/kernel/mca_drv.c:346:54: error: expression does not compute the number of elements in this array; element typ
e is 'int', not 'size_t' {aka 'long unsigned int'} [-Werror=sizeof-array-div]
346 | for (i = 1; i < sizeof sal_log_sect_min_sizes/sizeof(size_t); i++)
| ^
This is the same as sizeof(size_t), which is two shorter than the actual
array. Use the ARRAY_SIZE() macro to get the correct calculation instead.
Link: https://lkml.kernel.org/r/20210514214123.875971-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d71ba1649fa3c464c51ec7163e4b817345bff2c7 ]
kthread_mod_delayed_work() might race with
kthread_cancel_delayed_work_sync() or another kthread_mod_delayed_work()
call. The function lets the other operation win when it sees
work->canceling counter set. And it returns @false.
But it should return @true as it is done by the related workqueue API, see
mod_delayed_work_on().
The reason is that the return value might be used for reference counting.
It has to distinguish the case when the number of queued works has changed
or stayed the same.
The change is safe. kthread_mod_delayed_work() return value is not
checked anywhere at the moment.
Link: https://lore.kernel.org/r/20210521163526.GA17916@redhat.com
Link: https://lkml.kernel.org/r/20210610133051.15337-4-pmladek@suse.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reported-by: Oleg Nesterov <oleg@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Minchan Kim <minchan@google.com>
Cc: <jenhaochen@google.com>
Cc: Martin Liu <liumartin@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2705dfb2094777e405e065105e307074af8965c1 ]
ll_new_hw_segment() is reached only in case of single range discard
merge, and we don't have max discard segment size limit actually, so
it is wrong to run the following check:
if (req->nr_phys_segments + nr_phys_segs > blk_rq_get_max_segments(req))
it may be always false since req->nr_phys_segments is initialized as
one, and bio's segment count is still 1, blk_rq_get_max_segments(reg)
is 1 too.
Fix the issue by not doing the check and bypassing the calculation of
discard request's nr_phys_segments.
Based on analysis from Wang Shanker.
Cc: Christoph Hellwig <hch@lst.de>
Reported-by: Wang Shanker <shankerwangmiao@gmail.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20210628023312.1903255-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96e39e95c01283ff5695dafe659df88ada802159 ]
In adding APCS clock support for MSM8939, the second clock registration
fails due to duplicate device name like below.
[ 0.519657] sysfs: cannot create duplicate filename '/bus/platform/devices/qcom-apcs-msm8916-clk'
...
[ 0.661158] qcom_apcs_ipc b111000.mailbox: failed to register APCS clk
This is because MSM8939 has 3 APCS instances for Cluster0 (little cores),
Cluster1 (big cores) and CCI (Cache Coherent Interconnect). Although
only APCS of Cluster0 and Cluster1 have IPC bits, each of 3 APCS has
A53PLL clock control bits. That said, 3 'qcom-apcs-msm8916-clk' devices
need to be registered to instantiate all 3 clocks. Use PLATFORM_DEVID_AUTO
rather than PLATFORM_DEVID_NONE for platform_device_register_data() call
to fix the issue above.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0060a4f28a9ef45ae8163c0805e944a2b1546762 ]
In the other places where we update ses->status we protect the
updates via GlobalMid_Lock. So to be consistent add the same
locking around it in cifs_put_smb_ses where it was missing.
Addresses-Coverity: 1268904 ("Data race condition")
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
